[U-Boot] Axiom MCF5282 help

[TC Liew]

Mark,

There could be a hardware issue. Is the phy crystal on the board is
F25.00 or F25.00P?

Regards,
TsiChung

On Mon, May 25, 2009 at 3:15 PM, Mark Giacobbe
<mgiacobbe at adaptivedesignconcepts.com> wrote:
> Hi All -
>
>    I'm new to u-boot and I am running into some issues.  I an using the
> Axiom 5282lite board and I cannot get the ethernet working.
>
>    I have u-boot flashed onto the board, and when I connect the board
> to my Linksys WRT54G router, the Link LED on the board constantly
> flashes, as does the LED for that port on the router.
>
>    I assigned an IP to the board, outside the DHCP range, but I cannot
> ping the board, and the board cannot ping anything, including the router.
>
>    Any ideas?
>
>    Speaking of DHCP, does the code support DHCP for the 5282?
>
> Any help you be appreciated.
> Thanks
> Mark
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>