[U-Boot] MPC8536DS Evaluation Board Force DDR Setting cannot bedone properly
AgarwalAshish
ashish.g at teldevice.co.jp
Fri May 15 10:12:42 CEST 2009
Hello Mingkai
Thanks for you kind attention to my mail.
>Did you modify the the DDR memory size according to your DIMM in the
>function fixed_sdram()?
>
Yes i know i have to do this. I fixed this via declaring a MACRO Globally.
but for my first test case as i mentioned that i used the same Memory and same condition as they were before.
The same memory (DDR1 DIMM 512MB) i am using before with the SPD read DDR setting.
Indeed it is is neccessary to check @ the very first stage. :)
thanks for your point but i am still in the trap :(
--
Ashish
以上につきまして、ご確認の上宜しくお願い致します。
★━━━━━━━━━・:*:*:・ ゜・:*:*:・★☆★
東京エレクトロンデバイス株式会社
インレビアム開発センター「SFTG」
アガルワル アシッシュ
〒224-0045 神奈川県横浜市都筑区東方町1番地
TEL : 045-474-3549 FAX : 045-474-7060
E-MAIL : ashish.g at teldevice.co.jp
Home : http://www.teldevice.co.jp/
★☆★・:*:*:・ ゜・:*:*:・━━━━━━━━━★
>
>
>> -----Original Message-----
>> From: u-boot-bounces at lists.denx.de
>> [mailto:u-boot-bounces at lists.denx.de] On Behalf Of AgarwalAshish
>> Sent: Friday, May 15, 2009 3:27 PM
>> To: u-boot at lists.denx.de
>> Cc: ashish.g at teldevice.co.jp
>> Subject: [U-Boot] MPC8536DS Evaluation Board Force DDR
>> Setting cannot bedone properly
>>
>> Hello All,
>>
>> I am Ashish Agarwal.
>>
>> Currently i am working on the MPC8536DS Freescale Development
>> system evaluation and the Uboot development for a customized board.
>>
>> -------------------------------------------------------
>> Problem 1 : DDR Force setting
>> -------------------------------------------------------
>> when i try to force setting of DDR parameter over 8536DS
>> board through the
>> #define CONFIG_SPD_EEPROM -> #undef CONFIG_SPD_EEPROM
>> #define CONFIG_DDR_SPD -> #undef CONFIG_DDR_SPD
>>
>> the compile giver me error about "CONFIG_SPD_EEPROM is
>> required" as this is written at the bottom place of
>> include/configs/MPC8536ds.h file
>>
>> becuase we want to set forcly DDR parameters so I commented
>> these lines too ====================================================
>> #ifndef CONFIG_SPD_EEPROM
>> #error ("CONFIG_SPD_EEPROM is required") #endif
>> ====================================================
>> DDR Force parameter were set as they were set when i complied
>> the source with SPD setting. [Dumped from the Uboot].
>> They have to work for Force DDR setting too ;) but they are
>> not working.
>>
>>
>> I was able to compile the souce and dowloading of uboot to
>> the FLASH. but ubootis stuck in between.
>>
>> I stuck somewhere arround
>> "realocate_code" the next step of u-boot print statements
>> where i am reaching upto is "Now Running in RAM- U-Boot at: %0x ".
>>
>> and as i am not able to debugg u-boot via the CW it is
>> paining me to get rid out of this all stuff.
>>
>> [UBoot Debug for the MPC8536DS is not rleased yet they might
>> be supported in 8.8.3 version of CW :( ]
>>
>> though i had done DDR parameter work for the VxWorks OS DDR
>> Parameter setting [so i now how to calculate those]
>>
>> --> is it the source problem ??
>> The DDR parameter settings via "phys_size_t
>> fixed_sdram(void)" function. or it is the other issue ??
>> is i am missing something.
>>
>
>Did you modify the the DDR memory size according to your DIMM in the
>function fixed_sdram()?
>
>Best Regards,
>Mingkai
>
More information about the U-Boot
mailing list