[U-Boot] [PATCH 03/15] MPC85xx: Fix some settings for MPC8569MDS board
Haiying Wang
Haiying.Wang at freescale.com
Wed May 20 18:30:31 CEST 2009
- Change the CONFIG_SYS_CLK_FREQ and CONFIG_DDR_CLK_FREQ to 66666666 since the
on-board oscillator's freq is 66.666MHz.
- Increase the size of malloc to 512KB because MPC8569MDS needs more memory for
malloc to support up to eight Ethernet interfaces.
- Move Environment address out of uboot thus the saved environment variables
will not be erased after u-boot is re-programmed.
Signed-off-by: Haiying Wang <Haiying.Wang at freescale.com>
Signed-off-by: Dave Liu <daveliu at freescale.com>
---
include/configs/MPC8569MDS.h | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index b0af5dc..ea996ff 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -55,8 +55,8 @@
extern unsigned long get_clock_freq(void);
#endif
/* Replace a call to get_clock_freq (after it is implemented)*/
-#define CONFIG_SYS_CLK_FREQ 66000000
-#define CONFIG_DDR_CLK_FREQ 66000000
+#define CONFIG_SYS_CLK_FREQ 66666666
+#define CONFIG_DDR_CLK_FREQ CONFIG_SYS_CLK_FREQ
/*
* These can be toggled for performance analysis, otherwise use default.
@@ -194,7 +194,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
/* Serial Port */
#define CONFIG_CONS_INDEX 1
@@ -327,9 +327,9 @@ extern unsigned long get_clock_freq(void);
* Environment
*/
#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 256K(one sector) for env */
-#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
--
1.6.0.2
More information about the U-Boot
mailing list