[U-Boot] [PATCH 1/7] mx27: basic cpu support

Ilya Yanok yanok at emcraft.com
Wed May 20 01:55:55 CEST 2009


This patch adds generic code to support Freescale's i.MX27 SoCs.

Signed-off-by: Ilya Yanok <yanok at emcraft.com>
---
 cpu/arm926ejs/mx27/Makefile             |   44 +++
 cpu/arm926ejs/mx27/generic.c            |  237 ++++++++++++++
 cpu/arm926ejs/mx27/interrupt.c          |  201 ++++++++++++
 include/asm-arm/arch-mx27/asm-offsets.h |   16 +
 include/asm-arm/arch-mx27/clock.h       |   17 +
 include/asm-arm/arch-mx27/imx-regs.h    |  508 +++++++++++++++++++++++++++++++
 6 files changed, 1023 insertions(+), 0 deletions(-)
 create mode 100644 cpu/arm926ejs/mx27/Makefile
 create mode 100644 cpu/arm926ejs/mx27/generic.c
 create mode 100644 cpu/arm926ejs/mx27/interrupt.c
 create mode 100644 include/asm-arm/arch-mx27/asm-offsets.h
 create mode 100644 include/asm-arm/arch-mx27/clock.h
 create mode 100644 include/asm-arm/arch-mx27/imx-regs.h

diff --git a/cpu/arm926ejs/mx27/Makefile b/cpu/arm926ejs/mx27/Makefile
new file mode 100644
index 0000000..c86f3c2
--- /dev/null
+++ b/cpu/arm926ejs/mx27/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(SOC).a
+
+COBJS	= interrupt.o generic.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+all:	$(obj).depend $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/arm926ejs/mx27/generic.c b/cpu/arm926ejs/mx27/generic.c
new file mode 100644
index 0000000..850d5e6
--- /dev/null
+++ b/cpu/arm926ejs/mx27/generic.c
@@ -0,0 +1,237 @@
+/*
+ *  Copyright (c) 2008 Eric Jarrige <eric.jarrige at armadeus.org>
+ *  Copyright (c) 2009 Ilya Yanok <yanok at emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+
+/*
+ *  get the system pll clock in Hz
+ *
+ *                  mfi + mfn / (mfd +1)
+ *  f = 2 * f_ref * --------------------
+ *                        pd + 1
+ */
+unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref)
+{
+	unsigned int mfi = (pll >> 10) & 0xf;
+	unsigned int mfn = pll & 0x3ff;
+	unsigned int mfd = (pll >> 16) & 0x3ff;
+	unsigned int pd =  (pll >> 26) & 0xf;
+
+	mfi = mfi <= 5 ? 5 : mfi;
+
+	return lldiv(2 * (u64)f_ref * (mfi * (mfd + 1) + mfn),
+			(mfd + 1) * (pd + 1));
+}
+
+static ulong clk_in_32k(void)
+{
+	return 1024 * CONFIG_MX27_CLK32;
+}
+
+static ulong clk_in_26m(void)
+{
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+
+	if (readl(&pll->CSCR) & CSCR_OSC26M_DIV1P5) {
+		/* divide by 1.5 */
+		return 26000000 * 2 / 3;
+	} else {
+		return 26000000;
+	}
+}
+
+ulong imx_get_mpllclk(void)
+{
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+	ulong cscr = readl(&pll->CSCR);
+	ulong fref;
+
+	if (cscr & CSCR_MCU_SEL)
+		fref = clk_in_26m();
+	else
+		fref = clk_in_32k();
+
+	return imx_decode_pll(readl(&pll->MPCTL0), fref);
+}
+
+ulong imx_get_armclk(void)
+{
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+	ulong cscr = readl(&pll->CSCR);
+	ulong fref = imx_get_mpllclk();
+	ulong div;
+
+	if (!(cscr & CSCR_ARM_SRC_MPLL))
+		fref = lldiv((fref * 2), 3);
+
+	div = ((cscr >> 12) & 0x3) + 1;
+
+	return lldiv(fref, div);
+}
+
+ulong imx_get_ahbclk(void)
+{
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+	ulong cscr = readl(&pll->CSCR);
+	ulong fref = imx_get_mpllclk();
+	ulong div;
+
+	div = ((cscr >> 8) & 0x3) + 1;
+
+	return lldiv(fref * 2, 3 * div);
+}
+
+ulong imx_get_spllclk(void)
+{
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+	ulong cscr = readl(&pll->CSCR);
+	ulong fref;
+
+	if (cscr & CSCR_SP_SEL)
+		fref = clk_in_26m();
+	else
+		fref = clk_in_32k();
+
+	return imx_decode_pll(readl(&pll->SPCTL0), fref);
+}
+
+static ulong imx_decode_perclk(ulong div)
+{
+	return lldiv((imx_get_mpllclk() * 2), (div * 3));
+}
+
+ulong imx_get_perclk1(void)
+{
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+
+	return imx_decode_perclk((readl(&pll->PCDR1) & 0x3f) + 1);
+}
+
+ulong imx_get_perclk2(void)
+{
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+
+	return imx_decode_perclk(((readl(&pll->PCDR1) >> 8) & 0x3f) + 1);
+}
+
+ulong imx_get_perclk3(void)
+{
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+
+	return imx_decode_perclk(((readl(&pll->PCDR1) >> 16) & 0x3f) + 1);
+}
+
+ulong imx_get_perclk4(void)
+{
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+
+	return imx_decode_perclk(((readl(&pll->PCDR1) >> 24) & 0x3f) + 1);
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo (void)
+{
+	char buf[32];
+
+	printf("CPU:   Freescale i.MX27 at %s MHz\n\n",
+			strmhz(buf, imx_get_mpllclk()));
+	return 0;
+}
+#endif
+
+void imx_gpio_mode(int gpio_mode)
+{
+	struct gpio_regs *regs = (struct gpio_regs *)IMX_GPIO_BASE;
+	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
+	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
+	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
+	unsigned int aout = (gpio_mode & GPIO_AOUT_MASK) >> GPIO_AOUT_SHIFT;
+	unsigned int bout = (gpio_mode & GPIO_BOUT_MASK) >> GPIO_BOUT_SHIFT;
+	unsigned int tmp;
+
+	/* Pullup enable */
+	if (gpio_mode & GPIO_PUEN)
+		writel(readl(&regs->port[port].PUEN) | (1 << pin),
+				&regs->port[port].PUEN);
+	else
+		writel(readl(&regs->port[port].PUEN) & ~(1 << pin),
+				&regs->port[port].PUEN);
+
+	/* Data direction */
+	if (gpio_mode & GPIO_OUT)
+		writel(readl(&regs->port[port].DDIR) | 1 << pin,
+				&regs->port[port].DDIR);
+	else
+		writel(readl(&regs->port[port].DDIR) & ~(1 << pin),
+				&regs->port[port].DDIR);
+
+	/* Primary / alternate function */
+	if (gpio_mode & GPIO_AF)
+		writel(readl(&regs->port[port].GPR) | (1 << pin),
+				&regs->port[port].GPR);
+	else
+		writel(readl(&regs->port[port].GPR) & ~(1 << pin),
+				&regs->port[port].GPR);
+
+	/* use as gpio? */
+	if (!(gpio_mode & (GPIO_PF | GPIO_AF)))
+		writel(readl(&regs->port[port].GIUS) | (1 << pin),
+				&regs->port[port].GIUS);
+	else
+		writel(readl(&regs->port[port].GIUS) & ~(1 << pin),
+				&regs->port[port].GIUS);
+
+	/* Output / input configuration */
+	if (pin < 16) {
+		tmp = readl(&regs->port[port].OCR1);
+		tmp &= ~(3 << (pin * 2));
+		tmp |= (ocr << (pin * 2));
+		writel(tmp, &regs->port[port].OCR1);
+
+		writel(readl(&regs->port[port].ICONFA1) & ~(3 << (pin * 2)),
+				&regs->port[port].ICONFA1);
+		writel(readl(&regs->port[port].ICONFA1) | aout << (pin * 2),
+				&regs->port[port].ICONFA1);
+		writel(readl(&regs->port[port].ICONFB1) & ~(3 << (pin * 2)),
+				&regs->port[port].ICONFB1);
+		writel(readl(&regs->port[port].ICONFB1) | bout << (pin * 2),
+				&regs->port[port].ICONFB1);
+	} else {
+		pin -= 16;
+
+		tmp = readl(&regs->port[port].OCR2);
+		tmp &= ~(3 << (pin * 2));
+		tmp |= (ocr << (pin * 2));
+		writel(tmp, &regs->port[port].OCR2);
+
+		writel(readl(&regs->port[port].ICONFA2) & ~(3 << (pin * 2)),
+				&regs->port[port].ICONFA2);
+		writel(readl(&regs->port[port].ICONFA2) | aout << (pin * 2),
+				&regs->port[port].ICONFA2);
+		writel(readl(&regs->port[port].ICONFB2) & ~(3 << (pin * 2)),
+				&regs->port[port].ICONFB2);
+		writel(readl(&regs->port[port].ICONFB2) | bout << (pin * 2),
+				&regs->port[port].ICONFB2);
+	}
+}
+
diff --git a/cpu/arm926ejs/mx27/interrupt.c b/cpu/arm926ejs/mx27/interrupt.c
new file mode 100644
index 0000000..8f3e809
--- /dev/null
+++ b/cpu/arm926ejs/mx27/interrupt.c
@@ -0,0 +1,201 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger at sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu at sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj at denx.de>
+ *
+ * (C) Copyright 2009
+ * Ilya Yanok, Emcraft Systems Ltd, <yanok at emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+
+/* General purpose timers bitfields */
+#define GPTCR_SWR		(1 << 15)	/* Software reset	*/
+#define GPTCR_FRR		(1 << 8)	/* Freerun / restart	*/
+#define GPTCR_CLKSOURCE_32	(4 << 1)	/* Clock source		*/
+#define GPTCR_TEN		1		/* Timer enable		*/
+
+static ulong timestamp;
+static ulong lastinc;
+
+/* "time" is measured in 1 / CONFIG_SYS_HZ seconds, "tick" is internal timer period */
+#ifdef CONFIG_MX27_TIMER_HIGH_PRECISION
+/* ~0.4% error - measured with stop-watch on 100s boot-delay */
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+	tick *= CONFIG_SYS_HZ;
+	do_div(tick, CONFIG_MX27_CLK32);
+	return tick;
+}
+
+static inline unsigned long long time_to_tick(unsigned long long time)
+{
+	time *= CONFIG_MX27_CLK32;
+	do_div(time, CONFIG_SYS_HZ);
+	return time;
+}
+
+static inline unsigned long long us_to_tick(unsigned long long us)
+{
+	us = us * CONFIG_MX27_CLK32 + 999999;
+	do_div(us, 1000000);
+	return us;
+}
+#else
+/* ~2% error */
+#define TICK_PER_TIME	((CONFIG_MX27_CLK32 + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ)
+#define US_PER_TICK	(1000000 / CONFIG_MX27_CLK32)
+
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+	do_div(tick, TICK_PER_TIME);
+	return tick;
+}
+
+static inline unsigned long long time_to_tick(unsigned long long time)
+{
+	return time * TICK_PER_TIME;
+}
+
+static inline unsigned long long us_to_tick(unsigned long long us)
+{
+	us += US_PER_TICK - 1;
+	do_div(us, US_PER_TICK);
+	return us;
+}
+#endif
+
+/* nothing really to do with interrupts, just starts up a counter. */
+/* The 32768Hz 32-bit timer overruns in 131072 seconds */
+int timer_init(void)
+{
+	int i;
+	struct gpt_regs *regs = (struct gpt_regs *)IMX_TIM1_BASE;
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+
+	/* setup GP Timer 1 */
+	writel(GPTCR_SWR, &regs->GPT_TCTL);
+
+	writel(readl(&pll->PCCR0) | PCCR0_GPT1_EN, &pll->PCCR0);
+	writel(readl(&pll->PCCR1) | PCCR1_PERCLK1_EN, &pll->PCCR1);
+
+	for (i = 0; i < 100; i++)
+		writel(0, &regs->GPT_TCTL); /* We have no udelay by now */
+	writel(0, &regs->GPT_TPRER); /* 32Khz */
+	/* Freerun Mode, PERCLK1 input */
+	writel(readl(&regs->GPT_TCTL) | GPTCR_CLKSOURCE_32 | GPTCR_FRR,
+			&regs->GPT_TCTL);
+	writel(readl(&regs->GPT_TCTL) | GPTCR_TEN, &regs->GPT_TCTL);
+
+	return 0;
+}
+
+void reset_timer_masked(void)
+{
+	struct gpt_regs *regs = (struct gpt_regs *)IMX_TIM1_BASE;
+	/* reset time */
+	/* capture current incrementer value time */
+	lastinc = readl(&regs->GPT_TCN);
+	timestamp = 0; /* start "advancing" time stamp from 0 */
+}
+
+void reset_timer(void)
+{
+	reset_timer_masked();
+}
+
+unsigned long long get_ticks (void)
+{
+	struct gpt_regs *regs = (struct gpt_regs *)IMX_TIM1_BASE;
+	ulong now = readl(&regs->GPT_TCN); /* current tick value */
+
+	if (now >= lastinc)	/* normal mode (non roll) */
+		/* move stamp forward with absolut diff ticks */
+		timestamp += (now - lastinc);
+	else			/* we have rollover of incrementer */
+		timestamp += (0xFFFFFFFF - lastinc) + now;
+	lastinc = now;
+	return timestamp;
+}
+
+ulong get_timer_masked (void)
+{
+	/*
+	 * get_ticks() returns a long long (64 bit), it wraps in
+	 * 2^64 / CONFIG_MX27_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
+	 * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in
+	 * 5 * 10^6 days - long enough.
+	 */
+	return tick_to_time(get_ticks());
+}
+
+ulong get_timer (ulong base)
+{
+	return get_timer_masked () - base;
+}
+
+void set_timer (ulong t)
+{
+	timestamp = time_to_tick(t);
+}
+
+/* delay x useconds AND perserve advance timstamp value */
+void udelay (unsigned long usec)
+{
+	unsigned long long tmp;
+	ulong tmo;
+
+	tmo = us_to_tick(usec);
+	tmp = get_ticks() + tmo;	/* get current timestamp */
+
+	while (get_ticks() < tmp)	/* loop till event */
+		 /*NOP*/;
+}
+
+/*
+ * Reset the cpu by setting up the watchdog timer and let it time out
+ */
+void reset_cpu (ulong ignored)
+{
+	struct wdog_regs *regs = (struct wdog_regs *)IMX_WDT_BASE;
+	/* Disable watchdog and set Time-Out field to 0 */
+	writel(0x00000000, &regs->WCR);
+
+	/* Write Service Sequence */
+	writel(0x00005555, &regs->WSR);
+	writel(0x0000AAAA, &regs->WSR);
+
+	/* Enable watchdog */
+	writel(WCR_WDE, &regs->WCR);
+
+	while (1);
+	/*NOTREACHED*/
+}
diff --git a/include/asm-arm/arch-mx27/asm-offsets.h b/include/asm-arm/arch-mx27/asm-offsets.h
new file mode 100644
index 0000000..497afe5
--- /dev/null
+++ b/include/asm-arm/arch-mx27/asm-offsets.h
@@ -0,0 +1,16 @@
+#define AIPI1_PSR0	0x10000000
+#define AIPI1_PSR1	0x10000004
+#define AIPI2_PSR0	0x10020000
+#define AIPI2_PSR1	0x10020004
+#define CSCR		0x10027000
+#define MPCTL0		0x10027004
+#define SPCTL0		0x1002700c
+#define PCDR0		0x10027018
+#define PCDR1		0x1002701c
+#define PCCR0		0x10027020
+#define PCCR1		0x10027024
+#define ESDCTL0_ROF	0x00
+#define ESDCFG0_ROF	0x04
+#define ESDCTL1_ROF	0x08
+#define ESDCFG1_ROF	0x0C
+#define ESDMISC_ROF	0x10
diff --git a/include/asm-arm/arch-mx27/clock.h b/include/asm-arm/arch-mx27/clock.h
new file mode 100644
index 0000000..f6615d9
--- /dev/null
+++ b/include/asm-arm/arch-mx27/clock.h
@@ -0,0 +1,17 @@
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H
+unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref);
+
+ulong imx_get_mpllclk(void);
+ulong imx_get_armclk(void);
+ulong imx_get_spllclk(void);
+ulong imx_get_fclk(void);
+ulong imx_get_hclk(void);
+ulong imx_get_bclk(void);
+ulong imx_get_perclk1(void);
+ulong imx_get_perclk2(void);
+ulong imx_get_perclk3(void);
+ulong imx_get_ahbclk(void);
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/include/asm-arm/arch-mx27/imx-regs.h b/include/asm-arm/arch-mx27/imx-regs.h
new file mode 100644
index 0000000..16d2142
--- /dev/null
+++ b/include/asm-arm/arch-mx27/imx-regs.h
@@ -0,0 +1,508 @@
+/*
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer at pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _IMX_REGS_H
+#define _IMX_REGS_H
+
+#ifndef __ASSEMBLY__
+
+extern void imx_gpio_mode (int gpio_mode);
+
+/* AIPI */
+struct aipi_regs {
+	u32 PSR0;
+	u32 PSR1;
+};
+
+/* System Control */
+struct system_control_regs {
+	u32 res[5];
+	u32 FMCR;
+	u32 GPCR;
+	u32 WBCR;
+	u32 DSCR1;
+	u32 DSCR2;
+	u32 DSCR3;
+	u32 DSCR4;
+	u32 DSCR5;
+	u32 DSCR6;
+	u32 DSCR7;
+	u32 DSCR8;
+	u32 DSCR9;
+	u32 DSCR10;
+	u32 DSCR11;
+	u32 DSCR12;
+	u32 DSCR13;
+	u32 PSCR;
+	u32 PMCR;
+	u32 res1;
+	u32 DCVR0;
+	u32 DCVR1;
+	u32 DCVR2;
+	u32 DCVR3;
+};
+
+/* Chip Select Registers */
+struct weim_regs {
+	u32 CS0U;	/* Chip Select 0 Upper Register    */
+	u32 CS0L;	/* Chip Select 0 Lower Register    */
+	u32 CS0A;	/* Chip Select 0 Addition Register */
+	u32 pad0;
+	u32 CS1U;	/* Chip Select 1 Upper Register    */
+	u32 CS1L;	/* Chip Select 1 Lower Register    */
+	u32 CS1A;	/* Chip Select 1 Addition Register */
+	u32 pad1;
+	u32 CS2U;	/* Chip Select 2 Upper Register    */
+	u32 CS2L;	/* Chip Select 2 Lower Register    */
+	u32 CS2A;	/* Chip Select 2 Addition Register */
+	u32 pad2;
+	u32 CS3U;	/* Chip Select 3 Upper Register    */
+	u32 CS3L;	/* Chip Select 3 Lower Register    */
+	u32 CS3A;	/* Chip Select 3 Addition Register */
+	u32 pad3;
+	u32 CS4U;	/* Chip Select 4 Upper Register    */
+	u32 CS4L;	/* Chip Select 4 Lower Register    */
+	u32 CS4A;	/* Chip Select 4 Addition Register */
+	u32 pad4;
+	u32 CS5U;	/* Chip Select 5 Upper Register    */
+	u32 CS5L;	/* Chip Select 5 Lower Register    */
+	u32 CS5A;	/* Chip Select 5 Addition Register */
+	u32 pad5;
+	u32 EIM;	/* WEIM Configuration Register     */
+};
+
+/* SDRAM Controller registers */
+struct esdramc_regs {
+/* Enhanced SDRAM Control Register 0 */
+	u32 ESDCTL0;
+/* Enhanced SDRAM Configuration Register 0 */
+	u32 ESDCFG0;
+/* Enhanced SDRAM Control Register 1 */
+	u32 ESDCTL1;
+/* Enhanced SDRAM Configuration Register 1 */
+	u32 ESDCFG1;
+/* Enhanced SDRAM Miscellanious Register */
+	u32 ESDMISC;
+};
+
+/* Watchdog Registers*/
+struct wdog_regs {
+	u32 WCR;
+	u32 WSR;
+	u32 WSTR;
+};
+
+/* PLL registers */
+struct pll_regs {
+	u32 CSCR;	/* Clock Source Control Register       */
+	u32 MPCTL0;	/* MCU PLL Control Register 0          */
+	u32 MPCTL1;	/* MCU PLL Control Register 1          */
+	u32 SPCTL0;	/* System PLL Control Register 0       */
+	u32 SPCTL1;	/* System PLL Control Register 1       */
+	u32 OSC26MCTL;	/* Oscillator 26M Register             */
+	u32 PCDR0;	/* Peripheral Clock Divider Register 0 */
+	u32 PCDR1;	/* Peripheral Clock Divider Register 1 */
+	u32 PCCR0;	/* Peripheral Clock Control Register 0 */
+	u32 PCCR1;	/* Peripheral Clock Control Register 1 */
+	u32 CCSR;	/* Clock Control Status Register       */
+};
+
+/*
+ * Definitions for the clocksource registers
+ */
+struct gpt_regs {
+	u32 GPT_TCTL;
+	u32 GPT_TPRER;
+	u32 GPT_TCMP;
+	u32 GPT_TCR;
+	u32 GPT_TCN;
+	u32 GPT_TSTAT;
+};
+
+/*
+ *  GPIO Module and I/O Multiplexer
+ */
+#define PORTA 0
+#define PORTB 1
+#define PORTC 2
+#define PORTD 3
+#define PORTE 4
+#define PORTF 5
+
+struct gpio_regs {
+	struct {
+		u32 DDIR;
+		u32 OCR1;
+		u32 OCR2;
+		u32 ICONFA1;
+		u32 ICONFA2;
+		u32 ICONFB1;
+		u32 ICONFB2;
+		u32 DR;
+		u32 GIUS;
+		u32 SSR;
+		u32 ICR1;
+		u32 ICR2;
+		u32 IMR;
+		u32 ISR;
+		u32 GPR;
+		u32 SWR;
+		u32 PUEN;
+		u32 res[0x2f];
+	} port[6];
+};
+
+/* IIM Control Registers */
+struct iim_regs {
+	u32 IIM_STAT;
+	u32 IIM_STATM;
+	u32 IIM_ERR;
+	u32 IIM_EMASK;
+	u32 IIM_FCTL;
+	u32 IIM_UA;
+	u32 IIM_LA;
+	u32 IIM_SDAT;
+	u32 IIM_PREV;
+	u32 IIM_SREV;
+	u32 IIM_PROG_P;
+	u32 IIM_SCS0;
+	u32 IIM_SCS1;
+	u32 IIM_SCS2;
+	u32 IIM_SCS3;
+	u32 res[0x1f0];
+	u32 IIM_BANK_AREA0[0x100];
+};
+#endif
+
+#define IMX_IO_BASE		0x10000000
+
+#define IMX_AIPI1_BASE		(0x00000 + IMX_IO_BASE)
+#define IMX_WDT_BASE		(0x02000 + IMX_IO_BASE)
+#define IMX_TIM1_BASE		(0x03000 + IMX_IO_BASE)
+#define IMX_TIM2_BASE		(0x04000 + IMX_IO_BASE)
+#define IMX_TIM3_BASE		(0x05000 + IMX_IO_BASE)
+#define IMX_UART1_BASE		(0x0a000 + IMX_IO_BASE)
+#define IMX_UART2_BASE		(0x0b000 + IMX_IO_BASE)
+#define IMX_UART3_BASE		(0x0c000 + IMX_IO_BASE)
+#define IMX_UART4_BASE		(0x0d000 + IMX_IO_BASE)
+#define IMX_I2C1_BASE		(0x12000 + IMX_IO_BASE)
+#define IMX_GPIO_BASE		(0x15000 + IMX_IO_BASE)
+#define IMX_TIM4_BASE		(0x19000 + IMX_IO_BASE)
+#define IMX_TIM5_BASE		(0x1a000 + IMX_IO_BASE)
+#define IMX_UART5_BASE		(0x1b000 + IMX_IO_BASE)
+#define IMX_UART6_BASE		(0x1c000 + IMX_IO_BASE)
+#define IMX_I2C2_BASE		(0x1D000 + IMX_IO_BASE)
+#define IMX_TIM6_BASE		(0x1f000 + IMX_IO_BASE)
+#define IMX_AIPI2_BASE		(0x20000 + IMX_IO_BASE)
+#define IMX_PLL_BASE		(0x27000 + IMX_IO_BASE)
+#define IMX_SYSTEM_CTL_BASE	(0x27800 + IMX_IO_BASE)
+#define IMX_IIM_BASE		(0x28000 + IMX_IO_BASE)
+#define IMX_FEC_BASE		(0x2b000 + IMX_IO_BASE)
+
+#define IMX_ESD_BASE		(0xD8001000)
+#define IMX_WEIM_BASE		(0xD8002000)
+
+/* FMCR System Control bit definition*/
+#define UART4_RXD_CTL	(1<<25)
+#define UART4_RTS_CTL	(1<<24)
+#define KP_COL6_CTL	(1<<18)
+#define KP_ROW7_CTL	(1<<17)
+#define KP_ROW6_CTL	(1<<16)
+#define PC_WAIT_B_CTL	(1<<14)
+#define PC_READY_CTL	(1<<13)
+#define PC_VS1_CTL	(1<<12)
+#define PC_VS2_CTL	(1<<11)
+#define PC_BVD1_CTL	(1<<10)
+#define PC_BVD2_CTL	(1<<9)
+#define IOS16_CTL	(1<<8)
+#define NF_FMS		(1<<5)
+#define NF_16BIT_SEL	(1<<4)
+#define SLCDC_SEL	(1<<2)
+#define SDCS1_SEL	(1<<1)
+#define SDCS0_SEL	(1<<0)
+
+
+/* important definition of some bits of WCR */
+#define WCR_WDE 0x04
+
+#define CSCR_MPEN		(1 << 0)
+#define CSCR_SPEN		(1 << 1)
+#define CSCR_FPM_EN		(1 << 2)
+#define CSCR_OSC26M_DIS		(1 << 3)
+#define CSCR_OSC26M_DIV1P5	(1 << 4)
+#define CSCR_AHB_DIV
+#define CSCR_ARM_DIV
+#define CSCR_ARM_SRC_MPLL	(1 << 15)
+#define CSCR_MCU_SEL		(1 << 16)
+#define CSCR_SP_SEL		(1 << 17)
+#define CSCR_MPLL_RESTART	(1 << 18)
+#define CSCR_SPLL_RESTART	(1 << 19)
+#define CSCR_MSHC_SEL		(1 << 20)
+#define CSCR_H264_SEL		(1 << 21)
+#define CSCR_SSI1_SEL		(1 << 22)
+#define CSCR_SSI2_SEL		(1 << 23)
+#define CSCR_SD_CNT
+#define CSCR_USB_DIV
+#define CSCR_UPDATE_DIS		(1 << 31)
+
+#define MPCTL1_BRMO		(1 << 6)
+#define MPCTL1_LF		(1 << 15)
+
+#define PCCR0_SSI2_EN	(1 << 0)
+#define PCCR0_SSI1_EN	(1 << 1)
+#define PCCR0_SLCDC_EN	(1 << 2)
+#define PCCR0_SDHC3_EN	(1 << 3)
+#define PCCR0_SDHC2_EN	(1 << 4)
+#define PCCR0_SDHC1_EN	(1 << 5)
+#define PCCR0_SDC_EN	(1 << 6)
+#define PCCR0_SAHARA_EN	(1 << 7)
+#define PCCR0_RTIC_EN	(1 << 8)
+#define PCCR0_RTC_EN	(1 << 9)
+#define PCCR0_PWM_EN	(1 << 11)
+#define PCCR0_OWIRE_EN	(1 << 12)
+#define PCCR0_MSHC_EN	(1 << 13)
+#define PCCR0_LCDC_EN	(1 << 14)
+#define PCCR0_KPP_EN	(1 << 15)
+#define PCCR0_IIM_EN	(1 << 16)
+#define PCCR0_I2C2_EN	(1 << 17)
+#define PCCR0_I2C1_EN	(1 << 18)
+#define PCCR0_GPT6_EN	(1 << 19)
+#define PCCR0_GPT5_EN	(1 << 20)
+#define PCCR0_GPT4_EN	(1 << 21)
+#define PCCR0_GPT3_EN	(1 << 22)
+#define PCCR0_GPT2_EN	(1 << 23)
+#define PCCR0_GPT1_EN	(1 << 24)
+#define PCCR0_GPIO_EN	(1 << 25)
+#define PCCR0_FEC_EN	(1 << 26)
+#define PCCR0_EMMA_EN	(1 << 27)
+#define PCCR0_DMA_EN	(1 << 28)
+#define PCCR0_CSPI3_EN	(1 << 29)
+#define PCCR0_CSPI2_EN	(1 << 30)
+#define PCCR0_CSPI1_EN	(1 << 31)
+
+#define PCCR1_MSHC_BAUDEN	(1 << 2)
+#define PCCR1_NFC_BAUDEN	(1 << 3)
+#define PCCR1_SSI2_BAUDEN	(1 << 4)
+#define PCCR1_SSI1_BAUDEN	(1 << 5)
+#define PCCR1_H264_BAUDEN	(1 << 6)
+#define PCCR1_PERCLK4_EN	(1 << 7)
+#define PCCR1_PERCLK3_EN	(1 << 8)
+#define PCCR1_PERCLK2_EN	(1 << 9)
+#define PCCR1_PERCLK1_EN	(1 << 10)
+#define PCCR1_HCLK_USB		(1 << 11)
+#define PCCR1_HCLK_SLCDC	(1 << 12)
+#define PCCR1_HCLK_SAHARA	(1 << 13)
+#define PCCR1_HCLK_RTIC		(1 << 14)
+#define PCCR1_HCLK_LCDC		(1 << 15)
+#define PCCR1_HCLK_H264		(1 << 16)
+#define PCCR1_HCLK_FEC		(1 << 17)
+#define PCCR1_HCLK_EMMA		(1 << 18)
+#define PCCR1_HCLK_EMI		(1 << 19)
+#define PCCR1_HCLK_DMA		(1 << 20)
+#define PCCR1_HCLK_CSI		(1 << 21)
+#define PCCR1_HCLK_BROM		(1 << 22)
+#define PCCR1_HCLK_ATA		(1 << 23)
+#define PCCR1_WDT_EN		(1 << 24)
+#define PCCR1_USB_EN		(1 << 25)
+#define PCCR1_UART6_EN		(1 << 26)
+#define PCCR1_UART5_EN		(1 << 27)
+#define PCCR1_UART4_EN		(1 << 28)
+#define PCCR1_UART3_EN		(1 << 29)
+#define PCCR1_UART2_EN		(1 << 30)
+#define PCCR1_UART1_EN		(1 << 31)
+
+/* SDRAM Controller registers bitfields */
+#define ESDCTL_PRCT(x)		(((x) & 0x3f) << 0)
+#define ESDCTL_BL		(1 << 7)
+#define ESDCTL_FP		(1 << 8)
+#define ESDCTL_PWDT(x)		(((x) & 3) << 10)
+#define ESDCTL_SREFR(x)		(((x) & 7) << 13)
+#define ESDCTL_DSIZ_16_UPPER	(0 << 16)
+#define ESDCTL_DSIZ_16_LOWER	(1 << 16)
+#define ESDCTL_DSIZ_32		(2 << 16)
+#define ESDCTL_COL8		(0 << 20)
+#define ESDCTL_COL9		(1 << 20)
+#define ESDCTL_COL10		(2 << 20)
+#define ESDCTL_ROW11		(0 << 24)
+#define ESDCTL_ROW12		(1 << 24)
+#define ESDCTL_ROW13		(2 << 24)
+#define ESDCTL_ROW14		(3 << 24)
+#define ESDCTL_ROW15		(4 << 24)
+#define ESDCTL_SP		(1 << 27)
+#define ESDCTL_SMODE_NORMAL	(0 << 28)
+#define ESDCTL_SMODE_PRECHARGE	(1 << 28)
+#define ESDCTL_SMODE_AUTO_REF	(2 << 28)
+#define ESDCTL_SMODE_LOAD_MODE	(3 << 28)
+#define ESDCTL_SMODE_MAN_REF	(4 << 28)
+#define ESDCTL_SDE		(1 << 31)
+
+#define ESDCFG_TRC(x)		(((x) & 0xf) << 0)
+#define ESDCFG_TRCD(x)		(((x) & 0x7) << 4)
+#define ESDCFG_TCAS(x)		(((x) & 0x3) << 8)
+#define ESDCFG_TRRD(x)		(((x) & 0x3) << 10)
+#define ESDCFG_TRAS(x)		(((x) & 0x7) << 12)
+#define ESDCFG_TWR		(1 << 15)
+#define ESDCFG_TMRD(x)		(((x) & 0x3) << 16)
+#define ESDCFG_TRP(x)		(((x) & 0x3) << 18)
+#define ESDCFG_TWTR		(1 << 20)
+#define ESDCFG_TXP(x)		(((x) & 0x3) << 21)
+
+#define ESDMISC_RST		(1 << 1)
+#define ESDMISC_MDDREN		(1 << 2)
+#define ESDMISC_MDDR_DL_RST	(1 << 3)
+#define ESDMISC_MDDR_MDIS	(1 << 4)
+#define ESDMISC_LHD		(1 << 5)
+#define ESDMISC_MA10_SHARE	(1 << 6)
+#define ESDMISC_SDRAM_RDY	(1 << 31)
+
+#define PC5_PF_I2C2_DATA	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 5)
+#define PC6_PF_I2C2_CLK		(GPIO_PORTC | GPIO_OUT | GPIO_PF | 6)
+#define PC7_PF_USBOTG_DATA5	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 7)
+#define PC8_PF_USBOTG_DATA6	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 8)
+#define PC9_PF_USBOTG_DATA0	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 9)
+#define PC10_PF_USBOTG_DATA2	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 10)
+#define PC11_PF_USBOTG_DATA1	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 11)
+#define PC12_PF_USBOTG_DATA4	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 12)
+#define PC13_PF_USBOTG_DATA3	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 13)
+
+#define PD0_AIN_FEC_TXD0	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 0)
+#define PD1_AIN_FEC_TXD1	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 1)
+#define PD2_AIN_FEC_TXD2	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 2)
+#define PD3_AIN_FEC_TXD3	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 3)
+#define PD4_AOUT_FEC_RX_ER	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 4)
+#define PD5_AOUT_FEC_RXD1	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 5)
+#define PD6_AOUT_FEC_RXD2	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 6)
+#define PD7_AOUT_FEC_RXD3	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 7)
+#define PD8_AF_FEC_MDIO		(GPIO_PORTD | GPIO_IN | GPIO_AF | 8)
+#define PD9_AIN_FEC_MDC		(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 9)
+#define PD10_AOUT_FEC_CRS	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 10)
+#define PD11_AOUT_FEC_TX_CLK	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 11)
+#define PD12_AOUT_FEC_RXD0	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 12)
+#define PD13_AOUT_FEC_RX_DV	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 13)
+#define PD14_AOUT_FEC_CLR	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 14)
+#define PD15_AOUT_FEC_COL	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 15)
+#define PD16_AIN_FEC_TX_ER	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16)
+#define PF23_AIN_FEC_TX_EN	(GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23)
+
+#define PE0_PF_USBOTG_NXT	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 0)
+#define PE1_PF_USBOTG_STP	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 1)
+#define PE2_PF_USBOTG_DIR	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 2)
+#define PE3_PF_UART2_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 3)
+#define PE4_PF_UART2_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 4)
+#define PE6_PF_UART2_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 6)
+#define PE7_PF_UART2_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 7)
+#define PE8_PF_UART3_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 8)
+#define PE9_PF_UART3_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 9)
+#define PE10_PF_UART3_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 10)
+#define PE11_PF_UART3_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 11)
+#define PE12_PF_UART1_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 12)
+#define PE13_PF_UART1_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 13)
+#define PE14_PF_UART1_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 14)
+#define PE15_PF_UART1_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 15)
+#define PE18_PF_SD1_D0		(GPIO_PORTE | GPIO_PF | 18)
+#define PE19_PF_SD1_D1		(GPIO_PORTE | GPIO_PF | 19)
+#define PE20_PF_SD1_D2		(GPIO_PORTE | GPIO_PF | 20)
+#define PE21_PF_SD1_D3		(GPIO_PORTE | GPIO_PF | 21)
+#define PE22_PF_SD1_CMD		(GPIO_PORTE | GPIO_PF | 22)
+#define PE23_PF_SD1_CLK		(GPIO_PORTE | GPIO_PF | 23)
+#define PB4_PF_SD2_D0		(GPIO_PORTB | GPIO_PF | 4)
+#define PB5_PF_SD2_D1		(GPIO_PORTB | GPIO_PF | 5)
+#define PB6_PF_SD2_D2		(GPIO_PORTB | GPIO_PF | 6)
+#define PB7_PF_SD2_D3		(GPIO_PORTB | GPIO_PF | 7)
+#define PB8_PF_SD2_CMD		(GPIO_PORTB | GPIO_PF | 8)
+#define PB9_PF_SD2_CLK		(GPIO_PORTB | GPIO_PF | 9)
+#define PD17_PF_I2C_DATA	(GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
+#define PD18_PF_I2C_CLK		(GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
+#define PE24_PF_USBOTG_CLK	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 24)
+#define PE25_PF_USBOTG_DATA7	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 25)
+
+/* Clocksource Bitfields */
+#define TCTL_SWR		(1<<15) /* Software reset */
+#define TCTL_FRR		(1<<8)  /* Freerun / restart */
+#define TCTL_CAP		(3<<6)  /* Capture Edge */
+#define TCTL_OM			(1<<5)  /* output mode */
+#define TCTL_IRQEN		(1<<4)  /* interrupt enable */
+#define TCTL_CLKSOURCE		(1)     /* Clock source bit position */
+#define TCTL_TEN		(1)     /* Timer enable */
+#define TPRER_PRES		(0xff)  /* Prescale */
+#define TSTAT_CAPT		(1<<1)  /* Capture event */
+#define TSTAT_COMP		(1)     /* Compare event */
+
+#define GPIO_PIN_MASK	0x1f
+
+#define GPIO_PORT_SHIFT	5
+#define GPIO_PORT_MASK	(0x7 << GPIO_PORT_SHIFT)
+
+#define GPIO_PORTA	(PORTA << GPIO_PORT_SHIFT)
+#define GPIO_PORTB	(PORTB << GPIO_PORT_SHIFT)
+#define GPIO_PORTC	(PORTC << GPIO_PORT_SHIFT)
+#define GPIO_PORTD	(PORTD << GPIO_PORT_SHIFT)
+#define GPIO_PORTE	(PORTE << GPIO_PORT_SHIFT)
+#define GPIO_PORTF	(PORTF << GPIO_PORT_SHIFT)
+
+#define GPIO_OUT	(1 << 8)
+#define GPIO_IN		(0 << 8)
+#define GPIO_PUEN	(1 << 9)
+
+#define GPIO_PF		(1 << 10)
+#define GPIO_AF		(1 << 11)
+
+#define GPIO_OCR_SHIFT	12
+#define GPIO_OCR_MASK	(3 << GPIO_OCR_SHIFT)
+#define GPIO_AIN	(0 << GPIO_OCR_SHIFT)
+#define GPIO_BIN	(1 << GPIO_OCR_SHIFT)
+#define GPIO_CIN	(2 << GPIO_OCR_SHIFT)
+#define GPIO_GPIO	(3 << GPIO_OCR_SHIFT)
+
+#define GPIO_AOUT_SHIFT	14
+#define GPIO_AOUT_MASK	(3 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT	(0 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_ISR	(1 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_0	(2 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_1	(3 << GPIO_AOUT_SHIFT)
+
+#define GPIO_BOUT_SHIFT	16
+#define GPIO_BOUT_MASK	(3 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT	(0 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_ISR	(1 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_0	(2 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_1	(3 << GPIO_BOUT_SHIFT)
+
+#define IIM_STAT_BUSY	(1 << 7)
+#define IIM_STAT_PRGD	(1 << 1)
+#define IIM_STAT_SNSD	(1 << 0)
+#define IIM_ERR_PRGE	(1 << 7)
+#define IIM_ERR_WPE	(1 << 6)
+#define IIM_ERR_OPE	(1 << 5)
+#define IIM_ERR_RPE	(1 << 4)
+#define IIM_ERR_WLRE	(1 << 3)
+#define IIM_ERR_SNSE	(1 << 2)
+#define IIM_ERR_PARITYE	(1 << 1)
+
+/* Definitions for i.MX27 TO2 */
+#define IIM0_MAC		5
+#define IIM0_SCC_KEY		11
+#define IIM1_SUID		1
+
+#endif				/* _IMX_REGS_H */
+
-- 
1.6.0.6



More information about the U-Boot mailing list