[U-Boot] [PATCH 01/15] MPC85xx: Add QE clk support

[Haiying Wang]

Signed-off-by: Haiying Wang <Haiying.Wang at freescale.com>
Acked-by: Timur Tabi <Timur at freescale.com>
---
 cpu/mpc85xx/cpu.c            |    4 ++++
 cpu/mpc85xx/speed.c          |   15 ++++++++++++++-
 include/asm-ppc/immap_85xx.h |    2 ++
 include/e500.h               |    1 +
 4 files changed, 21 insertions(+), 1 deletions(-)

diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index ef976a4..b812d88 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -184,6 +184,10 @@ int checkcpu (void)
 	printf("CPM:   %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
 #endif
 
+#ifdef CONFIG_QE
+	printf("       QE:%-4s MHz\n", strmhz(buf1, sysinfo.freqQE));
+#endif
+
 	puts("L1:    D-cache 32 kB enabled\n       I-cache 32 kB enabled\n");
 
 	return 0;
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index b0f47e0..286b6b2 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2007-2009 Freescale Semiconductor Inc.
  * (C) Copyright 2003 Motorola Inc.
  * Xianghua Xiao, (X.Xiao at motorola.com)
  *
@@ -40,6 +40,9 @@ void get_sys_info (sys_info_t * sysInfo)
 	uint plat_ratio,e500_ratio,half_freqSystemBus;
 	uint lcrr_div;
 	int i;
+#ifdef CONFIG_QE
+	u32 qe_ratio;
+#endif
 
 	plat_ratio = (gur->porpllsr) & 0x0000003e;
 	plat_ratio >>= 1;
@@ -65,6 +68,12 @@ void get_sys_info (sys_info_t * sysInfo)
 	}
 #endif
 
+#ifdef CONFIG_QE
+	qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)
+			>> MPC85xx_PORPLLSR_QE_RATIO_SHIFT;
+	sysInfo->freqQE = qe_ratio * CONFIG_SYS_CLK_FREQ;
+#endif
+
 #if defined(CONFIG_SYS_LBC_LCRR)
 	/* We will program LCRR to this value later */
 	lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
@@ -112,6 +121,10 @@ int get_clocks (void)
 	gd->mem_clk = sys_info.freqDDRBus;
 	gd->lbc_clk = sys_info.freqLocalBus;
 
+#ifdef CONFIG_QE
+	gd->qe_clk = sys_info.freqQE;
+	gd->brg_clk = gd->qe_clk / 2;
+#endif
 	/*
 	 * The base clock for I2C depends on the actual SOC.  Unfortunately,
 	 * there is no pattern that can be used to determine the frequency, so
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index 0810b8e..a4d25cd 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -1581,6 +1581,8 @@ typedef struct ccsr_gur {
 #define MPC85xx_PORPLLSR_DDR_RATIO	0x00003e00
 #define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT	9
 #endif
+#define MPC85xx_PORPLLSR_QE_RATIO	0x3e000000
+#define MPC85xx_PORPLLSR_QE_RATIO_SHIFT		25
 	uint	porbmsr;	/* 0xe0004 - POR boot mode status register */
 #define MPC85xx_PORBMSR_HA		0x00070000
 	uint	porimpscr;	/* 0xe0008 - POR I/O impedance status and control register */
diff --git a/include/e500.h b/include/e500.h
index 4c5eeb7..84b580d 100644
--- a/include/e500.h
+++ b/include/e500.h
@@ -18,6 +18,7 @@ typedef struct
   unsigned long freqSystemBus;
   unsigned long freqDDRBus;
   unsigned long freqLocalBus;
+  unsigned long freqQE;
 } MPC85xx_SYS_INFO;
 
 #endif  /* _ASMLANGUAGE */
-- 
1.6.0.2