[U-Boot] [PATCH v2] Gbe Controller driver support for kirkwood SOCs

Prafulla Wadaskar prafulla at marvell.com
Tue May 12 06:03:13 CEST 2009


Hi All

Ping....
I didn't here any feedback from anyone, waiting for your valued comments :-(

Regards..
Prafulla . . 

> -----Original Message-----
> From: Prafulla Wadaskar [mailto:prafulla at marvell.com] 
> Sent: Monday, May 04, 2009 11:27 PM
> To: u-boot at lists.denx.de
> Cc: Prabhanjan Sarnaik; Ronen Shitrit; Ashish Karkare; 
> Prafulla Wadaskar
> Subject: [PATCH v2] Gbe Controller driver support for kirkwood SOCs
> 
> Contributors:
> Yotam Admon <yotam at marvell.com>
> Michael Blostein <michaelbl at marvell.com
> 
> Reviewed by: Ronen Shitrit <rshitrit at marvell.com>
> Signed-off-by: Prafulla Wadaskar <prafulla at marvell.com>
> ---
> Change log:
> v2: entire rewrite/restructure of v1
> used small names for variable/function names
> readl/writel used to access SoC registers
> Soc registers accssed using pointers through net device struct
> miiphy registration done for external smi read/write access
> miiphy_link used to detect phy link presence
> cleaned for cosmetic changes
> 
>  cpu/arm926ejs/kirkwood/cpu.c |    8 +
>  drivers/net/Makefile         |    1 +
>  drivers/net/kirkwood_egiga.c | 1669 
> ++++++++++++++++++++++++++++++++++++++++++
>  drivers/net/kirkwood_egiga.h |  828 +++++++++++++++++++++
>  include/netdev.h             |    1 +
>  5 files changed, 2507 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/net/kirkwood_egiga.c
>  create mode 100644 drivers/net/kirkwood_egiga.h


More information about the U-Boot mailing list