[U-Boot] [PATCH 1/2 V2] afeb9260: fix macb device init

[Jean-Christophe PLAGNIOL-VILLARD]

uses PA10, PA11 for ETX2 and ETX3.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
 cpu/arm926ejs/at91/at91sam9260_devices.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/cpu/arm926ejs/at91/at91sam9260_devices.c b/cpu/arm926ejs/at91/at91sam9260_devices.c
index 6dc0acc..5309ba2 100644
--- a/cpu/arm926ejs/at91/at91sam9260_devices.c
+++ b/cpu/arm926ejs/at91/at91sam9260_devices.c
@@ -167,7 +167,7 @@ void at91_macb_hw_init(void)
 	at91_set_B_periph(AT91_PIN_PA25, 0);	/* ERX2 */
 	at91_set_B_periph(AT91_PIN_PA26, 0);	/* ERX3 */
 	at91_set_B_periph(AT91_PIN_PA27, 0);	/* ERXCK */
-#if defined(CONFIG_AT91SAM9260EK)
+#if defined(CONFIG_AT91SAM9260EK) || defined(CONFIG_AFEB9260)
 	/*
 	 * use PA10, PA11 for ETX2, ETX3.
 	 * PA23 and PA24 are for TWI EEPROM
-- 
1.6.3.1