[U-Boot] [PATCH] ARM DaVinci: EMIF settings

[Thomas Lange]

NAND module should not modify EMIF registers unrelated to CS2
that is used for NAND, i.e. do not modify EWAIT config register
or registers for other Chip Selects.

Without this patch, EMIF configurations made in board_init()
will be invalidated.

Signed-off-by: Thomas Lange <thomas at corelatus.se>
---
 drivers/mtd/nand/davinci_nand.c |   12 +++---------
 1 files changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index a974667..8ef18b8 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -386,9 +386,6 @@ static int nand_davinci_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
 static void nand_flash_init(void)
 {
 	u_int32_t	acfg1 = 0x3ffffffc;
-	u_int32_t	acfg2 = 0x3ffffffc;
-	u_int32_t	acfg3 = 0x3ffffffc;
-	u_int32_t	acfg4 = 0x3ffffffc;
 	emifregs	emif_regs;

 	/*------------------------------------------------------------------*
@@ -413,12 +410,9 @@ static void nand_flash_init(void)

 	emif_regs = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE;

-	emif_regs->AWCCR |= 0x10000000;
-	emif_regs->AB1CR = acfg1;	/* 0x08244128 */;
-	emif_regs->AB2CR = acfg2;
-	emif_regs->AB3CR = acfg3;
-	emif_regs->AB4CR = acfg4;
-	emif_regs->NANDFCR = 0x00000101;
+	emif_regs->AB1CR = acfg1; /* CS2 */
+
+	emif_regs->NANDFCR = 0x00000101; /* NAND flash on CS2 */
 }

 int board_nand_init(struct nand_chip *nand)
-- 
1.5.6.5