[U-Boot] [PATCH] lib_arch/board.c: Move malloc initialization before flash_init()
Stefan Roese
sr at denx.de
Mon May 11 15:50:12 CEST 2009
This patch moves the malloc initialization before calling flash_init().
Upcoming changes to the NOR FLASH common CFI driver with optional
MTD infrastructure and MTD concatenation support will call malloc().
And nothing really speaks against enabling malloc just a little earlier
in the boot stage. Some architectures already enable malloc before
calling flash_init() so they don't need any changes here.
Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Wolfgang Denk <wd at denx.de>
Cc: Mike Frysinger <vapier at gentoo.org>
Cc: Scott McNutt <smcnutt at psyent.com>
Cc: Shinya Kuribayashi <shinya.kuribayashi at necel.com>
Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
Cc: Daniel Hellstrom <daniel at gaisler.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
Cc: John Rigby <jcrigby at gmail.com>
---
If nobody from the platforms custodians objects against this patch
then I suggest that Wolfgang pulls it directly into next.
Thanks,
Stefan
lib_arm/board.c | 6 +++---
lib_blackfin/board.c | 7 ++++---
lib_m68k/board.c | 8 ++++----
lib_mips/board.c | 8 ++++----
lib_nios/board.c | 6 ++++--
lib_nios2/board.c | 6 ++++--
lib_ppc/board.c | 8 ++++----
lib_sh/board.c | 2 +-
lib_sparc/board.c | 9 ++++-----
9 files changed, 32 insertions(+), 28 deletions(-)
diff --git a/lib_arm/board.c b/lib_arm/board.c
index 09eaaf2..bbed820 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -313,6 +313,9 @@ void start_armboot (void)
}
}
+ /* armboot_start is defined in the board-specific linker script */
+ mem_malloc_init (_armboot_start - CONFIG_SYS_MALLOC_LEN);
+
#ifndef CONFIG_SYS_NO_FLASH
/* configure available FLASH banks */
display_flash_config (flash_init ());
@@ -347,9 +350,6 @@ void start_armboot (void)
}
#endif /* CONFIG_LCD */
- /* armboot_start is defined in the board-specific linker script */
- mem_malloc_init (_armboot_start - CONFIG_SYS_MALLOC_LEN);
-
#if defined(CONFIG_CMD_NAND)
puts ("NAND: ");
nand_init(); /* go init the NAND */
diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c
index c223711..1df8370 100644
--- a/lib_blackfin/board.c
+++ b/lib_blackfin/board.c
@@ -309,6 +309,10 @@ void board_init_r(gd_t * id, ulong dest_addr)
post_reloc();
#endif
+ /* initialize malloc() area */
+ mem_malloc_init();
+ malloc_bin_reloc();
+
#if !defined(CONFIG_SYS_NO_FLASH)
/* Initialize the flash and protect u-boot by default */
extern flash_info_t flash_info[];
@@ -326,9 +330,6 @@ void board_init_r(gd_t * id, ulong dest_addr)
bd->bi_flashsize = 0;
bd->bi_flashoffset = 0;
#endif
- /* initialize malloc() area */
- mem_malloc_init();
- malloc_bin_reloc();
#ifdef CONFIG_CMD_NAND
puts("NAND: ");
diff --git a/lib_m68k/board.c b/lib_m68k/board.c
index 583ce10..76b1f54 100644
--- a/lib_m68k/board.c
+++ b/lib_m68k/board.c
@@ -519,6 +519,10 @@ void board_init_r (gd_t *id, ulong dest_addr)
*/
trap_init (CONFIG_SYS_SDRAM_BASE);
+ /* initialize malloc() area */
+ mem_malloc_init ();
+ malloc_bin_reloc ();
+
#if !defined(CONFIG_SYS_NO_FLASH)
puts ("FLASH: ");
@@ -563,10 +567,6 @@ void board_init_r (gd_t *id, ulong dest_addr)
WATCHDOG_RESET ();
- /* initialize malloc() area */
- mem_malloc_init ();
- malloc_bin_reloc ();
-
#ifdef CONFIG_SPI
# if !defined(CONFIG_ENV_IS_IN_EEPROM)
spi_init_f ();
diff --git a/lib_mips/board.c b/lib_mips/board.c
index dfe6831..f483211 100644
--- a/lib_mips/board.c
+++ b/lib_mips/board.c
@@ -371,6 +371,10 @@ void board_init_r (gd_t *id, ulong dest_addr)
bd = gd->bd;
+ /* initialize malloc() area */
+ mem_malloc_init();
+ malloc_bin_reloc();
+
#ifndef CONFIG_SYS_NO_FLASH
/* configure available FLASH banks */
size = flash_init();
@@ -385,10 +389,6 @@ void board_init_r (gd_t *id, ulong dest_addr)
bd->bi_flashoffset = 0;
#endif
- /* initialize malloc() area */
- mem_malloc_init();
- malloc_bin_reloc();
-
#ifdef CONFIG_CMD_NAND
puts ("NAND: ");
nand_init (); /* go init the NAND */
diff --git a/lib_nios/board.c b/lib_nios/board.c
index 024beb5..fc63793 100644
--- a/lib_nios/board.c
+++ b/lib_nios/board.c
@@ -143,11 +143,13 @@ void board_init (void)
}
WATCHDOG_RESET ();
+ mem_malloc_init();
+ malloc_bin_reloc();
+
+ WATCHDOG_RESET ();
bd->bi_flashsize = flash_init();
WATCHDOG_RESET ();
- mem_malloc_init();
- malloc_bin_reloc();
env_relocate();
bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
diff --git a/lib_nios2/board.c b/lib_nios2/board.c
index d759f0f..7986bdc 100644
--- a/lib_nios2/board.c
+++ b/lib_nios2/board.c
@@ -149,11 +149,13 @@ void board_init (void)
}
WATCHDOG_RESET ();
+ mem_malloc_init();
+ malloc_bin_reloc();
+
+ WATCHDOG_RESET ();
bd->bi_flashsize = flash_init();
WATCHDOG_RESET ();
- mem_malloc_init();
- malloc_bin_reloc();
env_relocate();
bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index f69c5f4..7b76886 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -761,6 +761,10 @@ void board_init_r (gd_t *id, ulong dest_addr)
asm ("sync ; isync");
+ /* initialize malloc() area */
+ mem_malloc_init ();
+ malloc_bin_reloc ();
+
#if !defined(CONFIG_SYS_NO_FLASH)
puts ("FLASH: ");
@@ -818,10 +822,6 @@ void board_init_r (gd_t *id, ulong dest_addr)
WATCHDOG_RESET ();
- /* initialize malloc() area */
- mem_malloc_init ();
- malloc_bin_reloc ();
-
#ifdef CONFIG_SPI
# if !defined(CONFIG_ENV_IS_IN_EEPROM)
spi_init_f ();
diff --git a/lib_sh/board.c b/lib_sh/board.c
index d4cc85c..d0dcf31 100644
--- a/lib_sh/board.c
+++ b/lib_sh/board.c
@@ -156,8 +156,8 @@ init_fnc_t *init_sequence[] =
checkboard, /* Check support board */
dram_init, /* SDRAM init */
timer_init, /* SuperH Timer (TCNT0 only) init */
- sh_flash_init, /* Flash memory(NOR) init*/
sh_mem_env_init,
+ sh_flash_init, /* Flash memory(NOR) init*/
INIT_FUNC_NAND_INIT/* Flash memory (NAND) init */
INIT_FUNC_PCI_INIT /* PCI init */
devices_init,
diff --git a/lib_sparc/board.c b/lib_sparc/board.c
index e972d3e..862bce8 100644
--- a/lib_sparc/board.c
+++ b/lib_sparc/board.c
@@ -331,6 +331,10 @@ void board_init_f(ulong bootflag)
*/
interrupt_init();
+ /* initialize malloc() area */
+ mem_malloc_init();
+ malloc_bin_reloc();
+
#if !defined(CONFIG_SYS_NO_FLASH)
puts("FLASH: ");
@@ -371,11 +375,6 @@ void board_init_f(ulong bootflag)
bd->bi_flashoffset = 0;
#endif /* !CONFIG_SYS_NO_FLASH */
- /* initialize malloc() area */
- mem_malloc_init();
-
- malloc_bin_reloc();
-
#ifdef CONFIG_SPI
# if !defined(CONFIG_ENV_IS_IN_EEPROM)
spi_init_f();
--
1.6.2.5
More information about the U-Boot
mailing list