[U-Boot] [PATCH] OMAP3EVM: Set default bootfile

[Premi, Sanjeev]

> -----Original Message-----
> From: Wolfgang Denk [mailto:wd at denx.de] 
> Sent: Tuesday, May 05, 2009 3:51 PM
> To: Premi, Sanjeev
> Cc: u-boot at lists.denx.de; Pillai, Manikandan
> Subject: Re: [U-Boot] [PATCH] OMAP3EVM: Set default bootfile
> 
> Dear Sanjeev Premi,
> 
> In message <1241515371-24359-1-git-send-email-premi at ti.com> you wrote:
> > The current configuration doesn't define default
> > bootfile; leading to this warning at execution:
> 
> Note that this is not a problem, but a decision of the board
> maintainer.
> 
> Also, you can always just use setenv + saveenv if you want this
> changed on your board.
> 
> > OMAP3_EVM # dhcp
> > ...
> > ...
> > DHCP client bound to address 192.168.1.11
> > *** Warning: no boot file name; using 'AC18BE16.img'
> > TFTP from server 0.0.0.0; our IP address is 192.168.1.11;
> > sending through gateway 192.168.1.1
> > Filename 'AC18BE16.img'.
> > Load address: 0x82000000
> > Loading: *
> > TFTP error: 'File not found' (1)
> 
> This is standard behaviour and not a problem.
> 
> > Signed-off-by: Sanjeev Premi <premi at ti.com>
> > ---
> >  include/configs/omap3_evm.h |    2 ++
> >  1 files changed, 2 insertions(+), 0 deletions(-)
> > 
> > diff --git a/include/configs/omap3_evm.h 
> b/include/configs/omap3_evm.h
> > index 549cef9..e205c01 100644
> > --- a/include/configs/omap3_evm.h
> > +++ b/include/configs/omap3_evm.h
> > @@ -149,6 +149,8 @@
> >  /* Environment information */
> >  #define CONFIG_BOOTDELAY	10
> >  
> > +#define CONFIG_BOOTFILE		uImage
> > +
> 
> You should probably add the board maintainer on Cc: (done here) to get
> his ACK.

In this case, the board maintainer works with me. He will ACK it.

> 
> Best regards,
> 
> Wolfgang Denk
> 
> -- 
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> The thing is, as you progress in the Craft,  you'll  learn  there  is
> another rule... When you break rules, break 'em good and hard.
>                                     - Terry Pratchett, _Wyrd Sisters_
> 
>