[U-Boot] environement paramters with u-boot in nand

[Wolfgang Denk]

Dear "Cote, Sylvain",

In message <579B119545DAEF4689C8FBEEFEC5793F01D4FDF6E7E6 at ATLMBX.verint.corp.verintsystems.com> you wrote:
>
> I am currently working on AMCC Kilauea eval board. I am using u-boot
> 2009.3. I boot my board from nand. By default, when booting from
> nand, the environment (u-boot parameters) are embedded to u-boot. I

No, this is not correct. The environment is NOT embedded in U-Boot.
The environment occupies the two flash sectors right *before* the
U-Boot image.

> am interested to know if it is possible to get u-boot environment
> parameters out of u-boot and put it else where in nand (after u-boot
> by exemple).

Change the board config file as needed.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Intelligence without character is a dangerous thing."   - G. Steinem