[U-Boot] [PATCH v10] Marvell Kirkwood family SOC support
Prafulla Wadaskar
prafulla at marvell.com
Thu May 21 22:24:29 CEST 2009
Kirkwood family controllers are highly integrated SOCs
based on Feroceon-88FR131/Sheeva-88SV131 cpu core.
SOC versions supported:-
1) 88F6281-A0 define CONFIG_KW88F6281_A0
2) 88F6192-A0 define CONFIG_KW88F6192_A0
Other supported features:-
1) get_random_hex() fucntion
2) SPI port controller driver
3) PCI Express port initialization
Contributors:
Yotam Admon <yotam at marvell.com>
Michael Blostein <michaelbl at marvell.com
Reviewed-by: Ronen Shitrit <rshitrit at marvell.com>
Signed-off-by: Prafulla Wadaskar <prafulla at marvell.com>
---
Change log:
v2: crated arch-kirkwood and moved some header files there
renamed and moved spi.c to drivers/spi/
renamed and moved serial.c to drivers/serial/
doimage utility removed
soc_init.S renamed as lowlevel_init.S
debug prints removed
v3: lowlevel_init.S converted to lowlevel_init.c
removed BITxx macros, removed entire assembly code
Added CONFIG_ARCH_LOWLEVE_INIT support for arm926ejs core
updated as per review commens for v2
v4: updated as per review comments for v3
print_cpuinfo used to display Soc info
arch_misc_init support created and used for lib_arm
mandatory readl/write macros used
asm/cache.h asm/arch/spi.h asm//arch/serial.h created and used
v5: updated as per review comments for v4
cosmetic updates, arch_misc_init and arch_cpu_init used
start.S updated to call arch_lowlevel_init in case if lowlevl_init is skipped
bug fix in cpu.c
v6: lowlevel_init.S removed code moved under arch_cpu_init
v7: include <asm/arch/kirkwood.h> added to each c file
reference removed from include/asm/config.h
arch_misc_init defination kept as it is in include/common.h
bugfixed in get_random_hex function
v7.1: u-boot.lds moved from board specific to kirkwood
v8: mpp configuration added
u-boot.lsd and config.mk removed
serial driver removed and used ns16550
register offsets replaced by c struct
updated as per review comments for v7
v9: updated as per v8 review comments
removed all (u32) typecasts
spi driver bugfix and magic constants removed
tabs used for all indentation
v10: struct for nand flash registers added
cpu/arm926ejs/kirkwood/Makefile | 49 +++++
cpu/arm926ejs/kirkwood/cpu.c | 316 +++++++++++++++++++++++++++++
cpu/arm926ejs/kirkwood/dram.c | 58 ++++++
cpu/arm926ejs/kirkwood/mpp.c | 80 ++++++++
cpu/arm926ejs/kirkwood/timer.c | 168 +++++++++++++++
drivers/serial/serial.c | 3 +
drivers/spi/Makefile | 1 +
drivers/spi/kirkwood_spi.c | 185 +++++++++++++++++
include/asm-arm/arch-kirkwood/cpu.h | 149 ++++++++++++++
include/asm-arm/arch-kirkwood/kirkwood.h | 69 +++++++
include/asm-arm/arch-kirkwood/kw88f6192.h | 37 ++++
include/asm-arm/arch-kirkwood/kw88f6281.h | 37 ++++
include/asm-arm/arch-kirkwood/mpp.h | 303 +++++++++++++++++++++++++++
include/asm-arm/arch-kirkwood/spi.h | 56 +++++
include/asm-arm/cache.h | 41 ++++
include/common.h | 1 +
lib_arm/board.c | 4 +
17 files changed, 1557 insertions(+), 0 deletions(-)
create mode 100644 cpu/arm926ejs/kirkwood/Makefile
create mode 100644 cpu/arm926ejs/kirkwood/cpu.c
create mode 100644 cpu/arm926ejs/kirkwood/dram.c
create mode 100644 cpu/arm926ejs/kirkwood/mpp.c
create mode 100644 cpu/arm926ejs/kirkwood/timer.c
create mode 100644 drivers/spi/kirkwood_spi.c
create mode 100644 include/asm-arm/arch-kirkwood/cpu.h
create mode 100644 include/asm-arm/arch-kirkwood/kirkwood.h
create mode 100644 include/asm-arm/arch-kirkwood/kw88f6192.h
create mode 100644 include/asm-arm/arch-kirkwood/kw88f6281.h
create mode 100644 include/asm-arm/arch-kirkwood/mpp.h
create mode 100644 include/asm-arm/arch-kirkwood/spi.h
create mode 100644 include/asm-arm/cache.h
diff --git a/cpu/arm926ejs/kirkwood/Makefile b/cpu/arm926ejs/kirkwood/Makefile
new file mode 100644
index 0000000..b966ea1
--- /dev/null
+++ b/cpu/arm926ejs/kirkwood/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Prafulla Wadaskar <prafulla at marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).a
+
+COBJS-y = dram.o
+COBJS-y += cpu.o
+COBJS-y += mpp.o
+COBJS-y += timer.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/arm926ejs/kirkwood/cpu.c b/cpu/arm926ejs/kirkwood/cpu.c
new file mode 100644
index 0000000..1286cac
--- /dev/null
+++ b/cpu/arm926ejs/kirkwood/cpu.c
@@ -0,0 +1,316 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/cache.h>
+#include <u-boot/md5.h>
+#include <asm/arch/kirkwood.h>
+
+#define BUFLEN 16
+
+void reset_cpu(unsigned long ignored)
+{
+ struct kwcpu_registers *cpureg =
+ (struct kwcpu_registers *)KW_CPU_REG_BASE;
+
+ writel(readl(&cpureg->rstoutn_mask) | (1 << 2),
+ &cpureg->rstoutn_mask);
+ writel(readl(&cpureg->sys_soft_rst) | 1,
+ &cpureg->sys_soft_rst);
+ while (1) ;
+}
+
+/*
+ * Generates Ramdom hex number reading some time varient system registers
+ * and using md5 algorithm
+ */
+unsigned char get_random_hex(void)
+{
+ int i;
+ u32 inbuf[BUFLEN];
+ u8 outbuf[BUFLEN];
+
+ /*
+ * in case of 88F6281/88F6192 A0,
+ * Bit7 need to reset to generate random values in KW_REG_UNDOC_0x1470
+ * Soc reg offsets KW_REG_UNDOC_0x1470 and KW_REG_UNDOC_0x1478 are reserved regs and
+ * Does not have names at this moment (no errata available)
+ */
+ writel(readl(KW_REG_UNDOC_0x1478) & ~(1 << 7), KW_REG_UNDOC_0x1478);
+ for (i = 0; i < BUFLEN; i++) {
+ inbuf[i] = readl(KW_REG_UNDOC_0x1470);
+ }
+ md5((u8 *) inbuf, (BUFLEN * sizeof(u32)), outbuf);
+ return outbuf[outbuf[7] % 0x0f];
+}
+
+/*
+ * Window Size
+ * Used with the Base register to set the address window size and location.
+ * Must be programmed from LSB to MSB as sequence of 1’s followed by
+ * sequence of 0’s. The number of 1’s specifies the size of the window in
+ * 64 KByte granularity (e.g., a value of 0x00FF specifies 256 = 16 MByte).
+ * NOTE: A value of 0x0 specifies 64-KByte size.
+ */
+static unsigned int kw_winctrl_calcsize(unsigned int sizeval)
+{
+ int i;
+ unsigned int j = 0;
+
+ for (i = 0; i < (sizeval / 0x10000); i++)
+ j |= (1 << i);
+
+ return (0x0000ffff & j);
+}
+
+/* prepares data to be loaded in win_Ctrl register */
+#define KWCPU_WIN_CTRL_DATA(size, target, attr, en) (en | (target << 4) \
+ | (attr << 8) | (kw_winctrl_calcsize(size) << 16))
+
+/*
+ * kw_config_adr_windows - Configure address Windows
+ *
+ * There are 7 address windows supported by Kirkwood Soc to addess different
+ * devices. Each window can be configured for size, BAR and remap addr
+ * Below configuration is standard for most of the cases
+ *
+ * Reference Documentation:
+ * Mbus-L to Mbus Bridge Registers Configuration.
+ * (Sec 25.1 and 25.3 of Datasheet)
+ */
+int kw_config_adr_windows(void)
+{
+ struct kwwin_registers *winregs =
+ (struct kwwin_registers *)KW_CPU_WIN_BASE;
+
+ writel(KWCPU_WIN_CTRL_DATA(0xc0000, KWCPU_TARGET_PCIE,
+ KWCPU_ATTR_PCIE_MEM, KWCPU_WIN_ENABLE),
+ &winregs[0].ctrl);
+
+ writel(0x90000000, &winregs[0].base);
+ writel(0x90000000, &winregs[0].remap_lo);
+ writel(0x00000000, &winregs[0].remap_hi);
+
+ writel(KWCPU_WIN_CTRL_DATA(0x70000, KWCPU_TARGET_MEMORY,
+ KWCPU_ATTR_NANDFLASH, KWCPU_WIN_ENABLE),
+ &winregs[1].ctrl);
+ writel(0xF9000000, &winregs[1].base);
+ writel(0xF9000000, &winregs[1].remap_lo);
+ writel(0x00000000, &winregs[1].remap_hi);
+
+ writel(KWCPU_WIN_CTRL_DATA(0x80000, KWCPU_TARGET_PCIE,
+ KWCPU_ATTR_PCIE_IO, KWCPU_WIN_ENABLE),
+ &winregs[2].ctrl);
+ writel(0xF0000000, &winregs[2].base);
+ writel(0xC0000000, &winregs[2].remap_lo);
+ writel(0x00000000, &winregs[2].remap_hi);
+
+ writel(KWCPU_WIN_CTRL_DATA(0x80000, KWCPU_TARGET_MEMORY,
+ KWCPU_ATTR_SPIFLASH, KWCPU_WIN_ENABLE),
+ &winregs[3].ctrl);
+ writel(0xF8000000, &winregs[3].base);
+ writel(0x00000000, &winregs[3].remap_lo);
+ writel(0x00000000, &winregs[3].remap_hi);
+
+ writel(KWCPU_WIN_CTRL_DATA(0x80000, KWCPU_TARGET_MEMORY,
+ KWCPU_ATTR_BOOTROM, KWCPU_WIN_ENABLE),
+ &winregs[4].ctrl);
+ writel(0xFF000000, &winregs[4].base);
+ writel(0x00000000, &winregs[4].remap_lo);
+ writel(0x00000000, &winregs[4].remap_hi);
+
+ writel(KWCPU_WIN_CTRL_DATA(0xb0000, KWCPU_TARGET_MEMORY,
+ KWCPU_ATTR_SPIFLASH, KWCPU_WIN_DISABLE),
+ &winregs[5].ctrl);
+ writel(0xE8000000, &winregs[5].base);
+ writel(0x00000000, &winregs[5].remap_lo);
+ writel(0x00000000, &winregs[5].remap_hi);
+
+ writel(KWCPU_WIN_CTRL_DATA(0xb0000, KWCPU_TARGET_MEMORY,
+ KWCPU_ATTR_BOOTROM, KWCPU_WIN_DISABLE),
+ &winregs[6].ctrl);
+ writel(0xF0000000, &winregs[6].base);
+ writel(0x00000000, &winregs[6].remap_lo);
+ writel(0x00000000, &winregs[6].remap_hi);
+
+ writel(KWCPU_WIN_CTRL_DATA(0x0, KWCPU_TARGET_SASRAM, KWCPU_ATTR_SASRAM,
+ KWCPU_WIN_ENABLE), &winregs[7].ctrl);
+ writel(0xFB000000, &winregs[7].base);
+ writel(0x00000000, &winregs[7].remap_lo);
+ writel(0x00000000, &winregs[7].remap_hi);
+
+ return 0;
+}
+
+/*
+ * kw_config_gpio - GPIO configuration
+ */
+void kw_config_gpio(u32 gpp0_oe_val, u32 gpp1_oe_val, u32 gpp0_oe, u32 gpp1_oe)
+{
+ struct kwgpio_registers *gpio0reg =
+ (struct kwgpio_registers *)KW_GPIO0_BASE;
+ struct kwgpio_registers *gpio1reg =
+ (struct kwgpio_registers *)KW_GPIO1_BASE;
+
+ /* Init GPIOS to default values as per board requirement */
+ writel(gpp0_oe_val, &gpio0reg->dout);
+ writel(gpp1_oe_val, &gpio1reg->dout);
+ writel(gpp0_oe, &gpio0reg->oe);
+ writel(gpp1_oe, &gpio1reg->oe);
+}
+
+/*
+ * kw_config_mpp - Multi-Purpose Pins Functionality configuration
+ *
+ * Each MPP can be configured to different functionality through
+ * MPP control register, ref (sec 6.1 of kirkwood h/w specification)
+ *
+ * There are maximum 64 Multi-Pourpose Pins on Kirkwood
+ * Each MPP functionality can be configuration by a 4bit value
+ * of MPP control reg, the value and associated functionality depends
+ * upon used SoC varient
+ */
+int kw_config_mpp(u32 mpp0_7, u32 mpp8_15, u32 mpp16_23, u32 mpp24_31,
+ u32 mpp32_39, u32 mpp40_47, u32 mpp48_55)
+{
+ u32 *mppreg = (u32 *) KW_MPP_BASE;
+
+ /* program mpp registers */
+ writel(mpp0_7, &mppreg[0]);
+ writel(mpp8_15, &mppreg[1]);
+ writel(mpp16_23, &mppreg[2]);
+ writel(mpp24_31, &mppreg[3]);
+ writel(mpp32_39, &mppreg[4]);
+ writel(mpp40_47, &mppreg[5]);
+ writel(mpp48_55, &mppreg[6]);
+ return 0;
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+ char *name = "Unknown";
+
+ switch (readl(KW_REG_DEVICE_ID) & 0x03) {
+ case 1:
+ name = "88F6192_A0";
+ break;
+ case 2:
+ name = "88F6281_A0";
+ break;
+ default:
+ printf("SoC: Unsupported Kirkwood\n");
+ return -1;
+ }
+ printf("SoC: Kirkwood %s\n", name);
+ return 0;
+}
+#endif /* CONFIG_DISPLAY_CPUINFO */
+
+#ifdef CONFIG_ARCH_CPU_INIT
+int arch_cpu_init(void)
+{
+ u32 reg;
+ struct kwcpu_registers *cpureg =
+ (struct kwcpu_registers *)KW_CPU_REG_BASE;
+
+ /* Linux expects` the internal registers to be at 0xf1000000 */
+ writel(KW_REGS_PHY_BASE, KW_OFFSET_REG);
+
+ /* Enable and invalidate L2 cache in write through mode */
+ writel(readl(&cpureg->l2_cfg) | 0x18, &cpureg->l2_cfg);
+ invalidate_l2_cache();
+
+ kw_config_adr_windows();
+
+#ifdef CONFIG_KIRKWOOD_RGMII_PAD_1V8
+ /*
+ * Configures the I/O voltage of the pads connected to Egigabit
+ * Ethernet interface to 1.8V
+ * By defult it is set to 3.3V
+ */
+ reg = readl(KW_REG_MPP_OUT_DRV_REG);
+ reg |= (1 << 7);
+ writel(reg, KW_REG_MPP_OUT_DRV_REG);
+#endif
+#ifdef CONFIG_KIRKWOOD_EGIGA_INIT
+ /*
+ * Set egiga port0/1 in normal functional mode
+ * This is required becasue on kirkwood by default ports are in reset mode
+ * OS egiga driver may not have provision to set them in normal mode
+ * and if u-boot is build without network support, network may fail at OS level
+ */
+ reg = readl(KWGBE_PORT_SERIAL_CONTROL1_REG(0));
+ reg &= ~(1 << 4); /* Clear PortReset Bit */
+ writel(reg, (KWGBE_PORT_SERIAL_CONTROL1_REG(0)));
+ reg = readl(KWGBE_PORT_SERIAL_CONTROL1_REG(1));
+ reg &= ~(1 << 4); /* Clear PortReset Bit */
+ writel(reg, (KWGBE_PORT_SERIAL_CONTROL1_REG(1)));
+#endif
+#ifdef CONFIG_KIRKWOOD_PCIE_INIT
+ /*
+ * Enable PCI Express Port0
+ */
+ reg = readl(&cpureg->ctrl_stat);
+ reg |= (1 << 0); /* Set PEX0En Bit */
+ writel(reg, &cpureg->ctrl_stat);
+#endif
+ return 0;
+}
+#endif /* CONFIG_ARCH_CPU_INIT */
+
+/*
+ * SOC specific misc init
+ */
+#if defined(CONFIG_ARCH_MISC_INIT)
+int arch_misc_init(void)
+{
+ volatile u32 temp;
+
+ /*CPU streaming & write allocate */
+ temp = readfr_extra_feature_reg();
+ temp &= ~(1 << 28); /* disable wr alloc */
+ writefr_extra_feature_reg(temp);
+
+ temp = readfr_extra_feature_reg();
+ temp &= ~(1 << 29); /* streaming disabled */
+ writefr_extra_feature_reg(temp);
+
+ /* L2Cache settings */
+ temp = readfr_extra_feature_reg();
+ /* Disable L2C pre fetch - Set bit 24 */
+ temp |= (1 << 24);
+ /* enable L2C - Set bit 22 */
+ temp |= (1 << 22);
+ writefr_extra_feature_reg(temp);
+
+ icache_enable();
+ /* Change reset vector to address 0x0 */
+ temp = get_cr();
+ set_cr(temp & ~CR_V);
+
+ return 0;
+}
+#endif /* CONFIG_ARCH_MISC_INIT */
diff --git a/cpu/arm926ejs/kirkwood/dram.c b/cpu/arm926ejs/kirkwood/dram.c
new file mode 100644
index 0000000..3ec0548
--- /dev/null
+++ b/cpu/arm926ejs/kirkwood/dram.c
@@ -0,0 +1,58 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <config.h>
+#include <asm/arch/kirkwood.h>
+
+#define KW_REG_CPUCS_WIN_BAR(x) (KW_REGISTER(0x1500) + (x * 0x08))
+#define KW_REG_CPUCS_WIN_SZ(x) (KW_REGISTER(0x1504) + (x * 0x08))
+/*
+ * kw_sdram_bar - reads SDRAM Base Address Register
+ */
+u32 kw_sdram_bar(enum memory_bank bank)
+{
+ u32 result = 0;
+ u32 enable = 0x01 & readl(KW_REG_CPUCS_WIN_SZ(bank));
+
+ if ((!enable) || (bank > BANK3))
+ return 0;
+
+ result = readl(KW_REG_CPUCS_WIN_BAR(bank));
+ return result;
+}
+
+/*
+ * kw_sdram_bs - reads SDRAM Bank size
+ */
+u32 kw_sdram_bs(enum memory_bank bank)
+{
+ u32 result = 0;
+ u32 enable = 0x01 & readl(KW_REG_CPUCS_WIN_SZ(bank));
+
+ if ((!enable) || (bank > BANK3))
+ return 0;
+ result = 0xff000000 & readl(KW_REG_CPUCS_WIN_SZ(bank));
+ result += 0x01000000;
+ return result;
+}
diff --git a/cpu/arm926ejs/kirkwood/mpp.c b/cpu/arm926ejs/kirkwood/mpp.c
new file mode 100644
index 0000000..b2f0ad5
--- /dev/null
+++ b/cpu/arm926ejs/kirkwood/mpp.c
@@ -0,0 +1,80 @@
+/*
+ * arch/arm/mach-kirkwood/mpp.c
+ *
+ * MPP functions for Marvell Kirkwood SoCs
+ * Referenced from Linux kernel source
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <common.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/arch/mpp.h>
+
+static u32 kirkwood_variant(void)
+{
+ switch (readl(KW_REG_DEVICE_ID) & 0x03) {
+ case 1:
+ return MPP_F6192_MASK;
+ case 2:
+ return MPP_F6281_MASK;
+ default:
+ debug("MPP setup: unknown kirkwood variant\n");
+ return 0;
+ }
+}
+
+#define MPP_CTRL(i) (KW_MPP_BASE + (i* 4))
+#define MPP_NR_REGS (1 + MPP_MAX/8)
+
+void kirkwood_mpp_conf(u32 *mpp_list)
+{
+ u32 mpp_ctrl[MPP_NR_REGS];
+ unsigned int variant_mask;
+ int i;
+
+ variant_mask = kirkwood_variant();
+ if (!variant_mask)
+ return;
+
+ debug( "initial MPP regs:");
+ for (i = 0; i < MPP_NR_REGS; i++) {
+ mpp_ctrl[i] = readl(MPP_CTRL(i));
+ debug(" %08x", mpp_ctrl[i]);
+ }
+ debug("\n");
+
+
+ while (*mpp_list) {
+ unsigned int num = MPP_NUM(*mpp_list);
+ unsigned int sel = MPP_SEL(*mpp_list);
+ int shift;
+
+ if (num > MPP_MAX) {
+ debug("kirkwood_mpp_conf: invalid MPP "
+ "number (%u)\n", num);
+ continue;
+ }
+ if (!(*mpp_list & variant_mask)) {
+ debug("kirkwood_mpp_conf: requested MPP%u config "
+ "unavailable on this hardware\n", num);
+ continue;
+ }
+
+ shift = (num & 7) << 2;
+ mpp_ctrl[num / 8] &= ~(0xf << shift);
+ mpp_ctrl[num / 8] |= sel << shift;
+
+ mpp_list++;
+ }
+
+ debug(" final MPP regs:");
+ for (i = 0; i < MPP_NR_REGS; i++) {
+ writel(mpp_ctrl[i], MPP_CTRL(i));
+ debug(" %08x", mpp_ctrl[i]);
+ }
+ debug("\n");
+
+}
diff --git a/cpu/arm926ejs/kirkwood/timer.c b/cpu/arm926ejs/kirkwood/timer.c
new file mode 100644
index 0000000..5c39ee8
--- /dev/null
+++ b/cpu/arm926ejs/kirkwood/timer.c
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <asm/arch/kirkwood.h>
+
+#define UBOOT_CNTR 0 /* counter to use for uboot timer */
+
+/* Timer reload and current value registers */
+struct kwtmr_val {
+ u32 reload; /* Timer reload reg */
+ u32 val; /* Timer value reg */
+};
+
+/* Timer registers */
+struct kwtmr_registers {
+ u32 ctrl; /* Timer control reg */
+ u32 pad[3];
+ struct kwtmr_val tmr[2];
+ u32 wdt_reload;
+ u32 wdt_val;
+};
+
+struct kwtmr_registers *kwtmr_regs = (struct kwtmr_registers *)KW_TIMER_BASE;
+
+/*
+ * ARM Timers Registers Map
+ */
+#define CNTMR_CTRL_REG &kwtmr_regs->ctrl
+#define CNTMR_RELOAD_REG(tmrnum) &kwtmr_regs->tmr[tmrnum].reload
+#define CNTMR_VAL_REG(tmrnum) &kwtmr_regs->tmr[tmrnum].val
+
+/*
+ * ARM Timers Control Register
+ * CPU_TIMERS_CTRL_REG (CTCR)
+ */
+#define CTCR_ARM_TIMER_EN_OFFS(cntr) (cntr * 2)
+#define CTCR_ARM_TIMER_EN_MASK(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS)
+#define CTCR_ARM_TIMER_EN(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS(cntr))
+#define CTCR_ARM_TIMER_DIS(cntr) (0 << CTCR_ARM_TIMER_EN_OFFS(cntr))
+
+#define CTCR_ARM_TIMER_AUTO_OFFS(cntr) ((cntr * 2) + 1)
+#define CTCR_ARM_TIMER_AUTO_MASK(cntr) (1 << 1)
+#define CTCR_ARM_TIMER_AUTO_EN(cntr) (1 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
+#define CTCR_ARM_TIMER_AUTO_DIS(cntr) (0 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
+
+/*
+ * ARM Timer\Watchdog Reload Register
+ * CNTMR_RELOAD_REG (TRR)
+ */
+#define TRG_ARM_TIMER_REL_OFFS 0
+#define TRG_ARM_TIMER_REL_MASK 0xffffffff
+
+/*
+ * ARM Timer\Watchdog Register
+ * CNTMR_VAL_REG (TVRG)
+ */
+#define TVR_ARM_TIMER_OFFS 0
+#define TVR_ARM_TIMER_MASK 0xffffffff
+#define TVR_ARM_TIMER_MAX 0xffffffff
+#define TIMER_LOAD_VAL 0xffffffff
+
+#define READ_TIMER (readl(CNTMR_VAL_REG(UBOOT_CNTR)) / \
+ (CONFIG_SYS_TCLK / 1000))
+
+static ulong timestamp;
+static ulong lastdec;
+
+void reset_timer_masked(void)
+{
+ /* reset time */
+ lastdec = READ_TIMER;
+ timestamp = 0;
+}
+
+ulong get_timer_masked(void)
+{
+ ulong now = READ_TIMER;
+
+ if (lastdec >= now) {
+ /* normal mode */
+ timestamp += lastdec - now;
+ } else {
+ /* we have an overflow ... */
+ timestamp += lastdec +
+ (TIMER_LOAD_VAL / (CONFIG_SYS_TCLK / 1000)) - now;
+ }
+ lastdec = now;
+
+ return timestamp;
+}
+
+void reset_timer(void)
+{
+ reset_timer_masked();
+}
+
+ulong get_timer(ulong base)
+{
+ return get_timer_masked() - base;
+}
+
+void set_timer(ulong t)
+{
+ timestamp = t;
+}
+
+void udelay(unsigned long usec)
+{
+ uint current;
+ ulong delayticks;
+
+ current = readl(CNTMR_VAL_REG(UBOOT_CNTR));
+ delayticks = (usec * (CONFIG_SYS_TCLK / 1000000));
+
+ if (current < delayticks) {
+ delayticks -= current;
+ while (readl(CNTMR_VAL_REG(UBOOT_CNTR)) < current) ;
+ while ((TIMER_LOAD_VAL - delayticks) <
+ readl(CNTMR_VAL_REG(UBOOT_CNTR))) ;
+ } else {
+ while (readl(CNTMR_VAL_REG(UBOOT_CNTR)) >
+ (current - delayticks)) ;
+ }
+}
+
+/*
+ * init the counter
+ */
+int timer_init(void)
+{
+ unsigned int cntmrctrl;
+
+ /* load value into timer */
+ writel(TIMER_LOAD_VAL, CNTMR_RELOAD_REG(UBOOT_CNTR));
+ writel(TIMER_LOAD_VAL, CNTMR_VAL_REG(UBOOT_CNTR));
+
+ /* enable timer in auto reload mode */
+ cntmrctrl = readl(CNTMR_CTRL_REG);
+ cntmrctrl |= CTCR_ARM_TIMER_EN(UBOOT_CNTR);
+ cntmrctrl |= CTCR_ARM_TIMER_AUTO_EN(UBOOT_CNTR);
+ writel(cntmrctrl, CNTMR_CTRL_REG);
+
+ /* init the timestamp and lastdec value */
+ reset_timer_masked();
+
+ return 0;
+}
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index 966df9a..dd5f332 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -27,6 +27,9 @@
#ifdef CONFIG_NS87308
#include <ns87308.h>
#endif
+#ifdef CONFIG_KIRKWOOD
+#include <asm/arch/kirkwood.h>
+#endif
#if defined (CONFIG_SERIAL_MULTI)
#include <serial.h>
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 1350f3e..7ffa47d 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -28,6 +28,7 @@ LIB := $(obj)libspi.a
COBJS-$(CONFIG_ATMEL_DATAFLASH_SPI) += atmel_dataflash_spi.o
COBJS-$(CONFIG_ATMEL_SPI) += atmel_spi.o
COBJS-$(CONFIG_BFIN_SPI) += bfin_spi.o
+COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o
COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o
diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c
new file mode 100644
index 0000000..9d16e9b
--- /dev/null
+++ b/drivers/spi/kirkwood_spi.c
@@ -0,0 +1,185 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * Derived from drivers/spi/mpc8xxx_spi.c
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/arch/spi.h>
+#include <asm/arch/mpp.h>
+
+static struct kwspi_registers *spireg = (struct kwspi_registers *)KW_SPI_BASE;
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct spi_slave *slave;
+ u32 data;
+ u32 kwspi_mpp_config[] = {
+ MPP0_GPIO,
+ MPP7_SPI_SCn,
+ 0
+ };
+
+ if (!spi_cs_is_valid(bus, cs))
+ return NULL;
+
+ slave = malloc(sizeof(struct spi_slave));
+ if (!slave)
+ return NULL;
+
+ slave->bus = bus;
+ slave->cs = cs;
+
+ writel(~KWSPI_CSN_ACT | KWSPI_SMEMRDY, &spireg->ctrl);
+
+ /* calculate spi clock prescaller using max_hz */
+ data = ((CONFIG_SYS_TCLK / 2) / max_hz) & KWSPI_CLKPRESCL_MASK;
+ data |= 0x10;
+
+ /* program spi clock prescaller using max_hz */
+ writel(KWSPI_ADRLEN_3BYTE | data, &spireg->cfg);
+ debug("data = 0x%08x \n", data);
+
+ writel(KWSPI_SMEMRDIRQ, &spireg->irq_cause);
+ writel(KWSPI_IRQMASK, spireg->irq_mask);
+
+ /* program mpp registers to select SPI_CSn */
+ if (cs) {
+ kwspi_mpp_config[0] = MPP0_GPIO;
+ kwspi_mpp_config[1] = MPP7_SPI_SCn;
+ } else {
+ kwspi_mpp_config[0] = MPP0_SPI_SCn;
+ kwspi_mpp_config[1] = MPP7_GPO;
+ }
+ kirkwood_mpp_conf(kwspi_mpp_config);
+
+ return slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ free(slave);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+}
+
+#ifndef CONFIG_SPI_CS_IS_VALID
+/*
+ * you can define this function board specific
+ * define above CONFIG in board specific config file and
+ * provide the function in board specific src file
+ */
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return (bus == 0 && (cs == 0 || cs == 1));
+}
+#endif
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ writel(readl(&spireg->ctrl) | KWSPI_IRQUNMASK, &spireg->ctrl);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ writel(readl(&spireg->ctrl) & KWSPI_IRQMASK, &spireg->ctrl);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+ void *din, unsigned long flags)
+{
+ unsigned int tmpdout, tmpdin;
+ int tm, isread = 0;
+
+ debug("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n",
+ slave->bus, slave->cs, dout, din, bitlen);
+
+ if (flags & SPI_XFER_BEGIN)
+ spi_cs_activate(slave);
+
+ /*
+ * handle data in 8-bit chunks
+ * TBD: 2byte xfer mode to be enabled
+ */
+ writel(((readl(&spireg->cfg) & ~KWSPI_XFERLEN_MASK) |
+ KWSPI_XFERLEN_1BYTE), &spireg->cfg);
+
+ while (bitlen > 4) {
+ debug("loopstart bitlen %d\n", bitlen);
+ tmpdout = 0;
+
+ /* Shift data so it's msb-justified */
+ if (dout)
+ tmpdout = *(u32 *) dout & 0x0ff;
+
+ writel(~KWSPI_SMEMRDIRQ, &spireg->irq_cause);
+ writel(tmpdout, &spireg->dout); /* Write the data out */
+ debug("*** spi_xfer: ... %08x written, bitlen %d\n",
+ tmpdout, bitlen);
+
+ /*
+ * Wait for SPI transmit to get out
+ * or time out (1 second = 1000 ms)
+ * The NE event must be read and cleared first
+ */
+ for (tm = 0, isread = 0; tm < KWSPI_TIMEOUT; ++tm) {
+ if (readl(&spireg->irq_cause) & KWSPI_SMEMRDIRQ) {
+ isread = 1;
+ tmpdin = readl(&spireg->din);
+ debug
+ ("spi_xfer: din %08x..%08x read\n",
+ din, tmpdin);
+
+ if (din) {
+ *((u8 *) din) = (u8) tmpdin;
+ din += 1;
+ }
+ if (dout)
+ dout += 1;
+ bitlen -= 8;
+ }
+ if (isread)
+ break;
+ }
+ if (tm >= KWSPI_TIMEOUT)
+ printf("*** spi_xfer: Time out during SPI transfer\n");
+
+ debug("loopend bitlen %d\n", bitlen);
+ }
+
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
+
+ return 0;
+}
diff --git a/include/asm-arm/arch-kirkwood/cpu.h b/include/asm-arm/arch-kirkwood/cpu.h
new file mode 100644
index 0000000..635bd8f
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/cpu.h
@@ -0,0 +1,149 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _KWCPU_H
+#define _KWCPU_H
+
+#include <asm/system.h>
+
+#ifndef __ASSEMBLY__
+
+#define KWGBE_PORT_SERIAL_CONTROL1_REG(_x) \
+ ((_x ? KW_EGIGA0_BASE : KW_EGIGA1_BASE) + 0x44c)
+
+#define KW_REG_DEVICE_ID (KW_MPP_BASE + 0x34)
+#define KW_REG_MPP_OUT_DRV_REG (KW_MPP_BASE + 0xE0)
+
+enum memory_bank {
+ BANK0,
+ BANK1,
+ BANK2,
+ BANK3
+};
+
+enum kwcpu_winen {
+ KWCPU_WIN_DISABLE,
+ KWCPU_WIN_ENABLE
+};
+
+enum kwcpu_target {
+ KWCPU_TARGET_RESERVED,
+ KWCPU_TARGET_MEMORY,
+ KWCPU_TARGET_1RESERVED,
+ KWCPU_TARGET_SASRAM,
+ KWCPU_TARGET_PCIE
+};
+
+enum kwcpu_attrib {
+ KWCPU_ATTR_SASRAM = 0x01,
+ KWCPU_ATTR_NANDFLASH = 0x2f,
+ KWCPU_ATTR_SPIFLASH = 0x1e,
+ KWCPU_ATTR_BOOTROM = 0x1d,
+ KWCPU_ATTR_PCIE_IO = 0xe0,
+ KWCPU_ATTR_PCIE_MEM = 0xe8
+};
+
+/*
+ * read feroceon/sheeva core extra feature register
+ * using co-proc instruction
+ */
+static inline unsigned int readfr_extra_feature_reg(void)
+{
+ unsigned int val;
+ asm volatile ("mrc p15, 1, %0, c15, c1, 0 @ readfr exfr":"=r"
+ (val)::"cc");
+ return val;
+}
+
+/*
+ * write feroceon/sheeva core extra feature register
+ * using co-proc instruction
+ */
+static inline void writefr_extra_feature_reg(unsigned int val)
+{
+ asm volatile ("mcr p15, 1, %0, c15, c1, 0 @ writefr exfr"::"r"
+ (val):"cc");
+ isb();
+}
+
+/*
+ * Register structures
+ */
+struct kwgpio_registers {
+ u32 dout;
+ u32 oe;
+ u32 blink_en;
+ u32 din_pol;
+ u32 din;
+ u32 irq_cause;
+ u32 irq_mask;
+ u32 irq_level;
+};
+
+struct kwwin_registers {
+ u32 ctrl;
+ u32 base;
+ u32 remap_lo;
+ u32 remap_hi;
+};
+
+/* CPU control and status registers */
+struct kwcpu_registers {
+ u32 config; /*0x20100 */
+ u32 ctrl_stat; /*0x20104 */
+ u32 rstoutn_mask; /* 0x20108 */
+ u32 sys_soft_rst; /* 0x2010C */
+ u32 ahb_mbus_cause_irq; /* 0x20110 */
+ u32 ahb_mbus_mask_irq; /* 0x20114 */
+ u32 pad1[2];
+ u32 ftdll_config; /* 0x20120 */
+ u32 pad2;
+ u32 l2_cfg; /* 0x20128 */
+};
+
+/* NAND flash registers */
+struct kwnandf_registers {
+ u32 rd_params; /* 0x10418 */
+ u32 wr_param; /* 0x1041c */
+ u8 pag[0x10470 - 0x1041c -4];
+ u32 ctrl; /* 0x10470 */
+};
+
+/*
+ * functions
+ */
+void reset_cpu(unsigned long ignored);
+unsigned char get_random_hex(void);
+unsigned int kw_sdram_bar(enum memory_bank bank);
+unsigned int kw_sdram_bs(enum memory_bank bank);
+int kw_config_adr_windows(void);
+void kw_config_gpio(unsigned int gpp0_oe_val, unsigned int gpp1_oe_val,
+ unsigned int gpp0_oe, unsigned int gpp1_oe);
+int kw_config_mpp(unsigned int mpp0_7, unsigned int mpp8_15,
+ unsigned int mpp16_23, unsigned int mpp24_31,
+ unsigned int mpp32_39, unsigned int mpp40_47,
+ unsigned int mpp48_55);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _KWCPU_H */
diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h
new file mode 100644
index 0000000..f026b9c
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/kirkwood.h
@@ -0,0 +1,69 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * Header file for the Marvell's Feroceon CPU core.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _ASM_ARCH_KIRKWOOD_H
+#define _ASM_ARCH_KIRKWOOD_H
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+#include <asm/io.h>
+#endif /* __ASSEMBLY__ */
+
+#if defined (CONFIG_FEROCEON_88FR131) || defined (CONFIG_SHEEVA_88SV131)
+#include <asm/arch/cpu.h>
+
+/* SOC specific definations */
+#define INTREG_BASE 0xd0000000
+#define KW_REGISTER(x) (KW_REGS_PHY_BASE + x)
+#define KW_OFFSET_REG (INTREG_BASE + 0x20080)
+
+/* undocumented registers */
+#define KW_REG_UNDOC_0x1470 (KW_REGISTER(0x1470))
+#define KW_REG_UNDOC_0x1478 (KW_REGISTER(0x1478))
+
+#define KW_UART0_BASE (KW_REGISTER(0x12000))
+#define KW_UART1_BASE (KW_REGISTER(0x13000))
+#define KW_MPP_BASE (KW_REGISTER(0x10000))
+#define KW_GPIO0_BASE (KW_REGISTER(0x10100))
+#define KW_GPIO1_BASE (KW_REGISTER(0x10140))
+#define KW_NANDF_BASE (KW_REGISTER(0x10418))
+#define KW_SPI_BASE (KW_REGISTER(0x10600))
+#define KW_CPU_WIN_BASE (KW_REGISTER(0x20000))
+#define KW_CPU_REG_BASE (KW_REGISTER(0x20100))
+#define KW_TIMER_BASE (KW_REGISTER(0x20300))
+#define KW_REG_PCIE_BASE (KW_REGISTER(0x40000))
+#define KW_EGIGA0_BASE (KW_REGISTER(0x72000))
+#define KW_EGIGA1_BASE (KW_REGISTER(0x76000))
+
+#if defined (CONFIG_KW88F6281)
+#include <asm/arch/kw88f6281.h>
+#elif defined (CONFIG_KW88F6192)
+#include <asm/arch/kw88f6192.h>
+#else
+#error "SOC Name not defined"
+#endif /* CONFIG_KW88F6281 */
+#endif /* CONFIG_FEROCEON_88FR131 */
+#endif /* _ASM_ARCH_KIRKWOOD_H */
diff --git a/include/asm-arm/arch-kirkwood/kw88f6192.h b/include/asm-arm/arch-kirkwood/kw88f6192.h
new file mode 100644
index 0000000..a2b1f96
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/kw88f6192.h
@@ -0,0 +1,37 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * Header file for Feroceon CPU core 88FR131 Based KW88F6192 SOC.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _CONFIG_KW88F6192_H
+#define _CONFIG_KW88F6192_H
+
+/* SOC specific definations */
+#define KW88F6192_REGS_PHYS_BASE 0xf1000000
+#define KW_REGS_PHY_BASE KW88F6192_REGS_PHYS_BASE
+
+/* TCLK Core Clock defination */
+#define CONFIG_SYS_TCLK 166000000 /* 166MHz */
+
+#endif /* _CONFIG_KW88F6192_H */
diff --git a/include/asm-arm/arch-kirkwood/kw88f6281.h b/include/asm-arm/arch-kirkwood/kw88f6281.h
new file mode 100644
index 0000000..9b89b93
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/kw88f6281.h
@@ -0,0 +1,37 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * Header file for Feroceon CPU core 88FR131 Based KW88F6281 SOC.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _ASM_ARCH_KW88F6281_H
+#define _ASM_ARCH_KW88F6281_H
+
+/* SOC specific definations */
+#define KW88F6281_REGS_PHYS_BASE 0xf1000000
+#define KW_REGS_PHY_BASE KW88F6281_REGS_PHYS_BASE
+
+/* TCLK Core Clock defination*/
+#define CONFIG_SYS_TCLK 200000000 /* 200MHz */
+
+#endif /* _ASM_ARCH_KW88F6281_H */
diff --git a/include/asm-arm/arch-kirkwood/mpp.h b/include/asm-arm/arch-kirkwood/mpp.h
new file mode 100644
index 0000000..e021a80
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/mpp.h
@@ -0,0 +1,303 @@
+/*
+ * linux/arch/arm/mach-kirkwood/mpp.h -- Multi Purpose Pins
+ *
+ * Copyright 2009: Marvell Technology Group Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __KIRKWOOD_MPP_H
+#define __KIRKWOOD_MPP_H
+
+#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281) ( \
+ /* MPP number */ ((_num) & 0xff) | \
+ /* MPP select value */ (((_sel) & 0xf) << 8) | \
+ /* may be input signal */ ((!!(_in)) << 12) | \
+ /* may be output signal */ ((!!(_out)) << 13) | \
+ /* available on F6180 */ ((!!(_F6180)) << 14) | \
+ /* available on F6190 */ ((!!(_F6190)) << 15) | \
+ /* available on F6192 */ ((!!(_F6192)) << 16) | \
+ /* available on F6281 */ ((!!(_F6281)) << 17))
+
+#define MPP_NUM(x) ((x) & 0xff)
+#define MPP_SEL(x) (((x) >> 8) & 0xf)
+
+ /* num sel i o 6180 6190 6192 6281 */
+
+#define MPP_INPUT_MASK MPP( 0, 0x0, 1, 0, 0, 0, 0, 0 )
+#define MPP_OUTPUT_MASK MPP( 0, 0x0, 0, 1, 0, 0, 0, 0 )
+
+#define MPP_F6180_MASK MPP( 0, 0x0, 0, 0, 1, 0, 0, 0 )
+#define MPP_F6190_MASK MPP( 0, 0x0, 0, 0, 0, 1, 0, 0 )
+#define MPP_F6192_MASK MPP( 0, 0x0, 0, 0, 0, 0, 1, 0 )
+#define MPP_F6281_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP0_NF_IO2 MPP( 0, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 1, 1, 1, 1, 1 )
+
+#define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP1_NF_IO3 MPP( 1, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 1, 1, 1, 1, 1 )
+
+#define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP2_NF_IO4 MPP( 2, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 1, 1, 1, 1, 1 )
+
+#define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP3_NF_IO5 MPP( 3, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP3_SPI_MISO MPP( 3, 0x2, 1, 0, 1, 1, 1, 1 )
+
+#define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP4_NF_IO6 MPP( 4, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP4_UART0_RXD MPP( 4, 0x2, 1, 0, 1, 1, 1, 1 )
+#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 1, 0, 0, 1, 1 )
+#define MPP4_PTP_CLK MPP( 4, 0xd, 1, 0, 1, 1, 1, 1 )
+
+#define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP5_NF_IO7 MPP( 5, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 1, 1, 1, 1, 1 )
+#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 1, 1, 1, 1, 1 )
+#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 1, 0, 1, 1, 1 )
+
+#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 1, 1, 1, 1, 1 )
+#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 1, 1, 1, 1, 1 )
+#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 1, 1, 1, 1, 1 )
+
+#define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 1, 1, 1, 1, 1 )
+#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 1, 1, 1, 1, 1 )
+#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 1, 1, 1, 1, 1 )
+
+#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP8_TW_SDA MPP( 8, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 1, 1, 1, 1, 1 )
+#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 1, 1, 1, 1, 1 )
+#define MPP8_MII0_RXERR MPP( 8, 0x4, 1, 0, 0, 1, 1, 1 )
+#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 1, 0, 0, 1, 1 )
+#define MPP8_PTP_CLK MPP( 8, 0xc, 1, 0, 1, 1, 1, 1 )
+#define MPP8_MII0_COL MPP( 8, 0xd, 1, 0, 1, 1, 1, 1 )
+
+#define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP9_TW_SCK MPP( 9, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP9_UART0_CTS MPP( 9, 0x2, 1, 0, 1, 1, 1, 1 )
+#define MPP9_UART1_CTS MPP( 9, 0x3, 1, 0, 1, 1, 1, 1 )
+#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 1, 0, 1, 1, 1 )
+#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 1, 0, 1, 1, 1, 1 )
+#define MPP9_MII0_CRS MPP( 9, 0xd, 1, 0, 1, 1, 1, 1 )
+
+#define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 1, 1, 1, 1, 1 )
+#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 1, 1, 1, 1, 1 )
+#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 1, 0, 0, 1, 1 )
+#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 1, 1, 1, 1, 1 )
+
+#define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP11_SPI_MISO MPP( 11, 0x2, 1, 0, 1, 1, 1, 1 )
+#define MPP11_UART0_RXD MPP( 11, 0x3, 1, 0, 1, 1, 1, 1 )
+#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 1, 0, 1, 1, 1, 1 )
+#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 1, 1, 1, 1, 1 )
+#define MPP11_PTP_CLK MPP( 11, 0xd, 1, 0, 1, 1, 1, 1 )
+#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1 )
+
+#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1 )
+
+#define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP13_SD_CMD MPP( 13, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 1, 1, 1, 1, 1 )
+
+#define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP14_SD_D0 MPP( 14, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP14_UART1_RXD MPP( 14, 0x3, 1, 0, 1, 1, 1, 1 )
+#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 1, 0, 0, 1, 1 )
+#define MPP14_MII0_COL MPP( 14, 0xd, 1, 0, 1, 1, 1, 1 )
+
+#define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP15_SD_D1 MPP( 15, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 1, 1, 1, 1, 1 )
+#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 1, 1, 1, 1, 1 )
+#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 1, 0, 1, 1, 1 )
+
+#define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP16_SD_D2 MPP( 16, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP16_UART0_CTS MPP( 16, 0x2, 1, 0, 1, 1, 1, 1 )
+#define MPP16_UART1_RXD MPP( 16, 0x3, 1, 0, 1, 1, 1, 1 )
+#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 1, 0, 0, 1, 1 )
+#define MPP16_MII0_CRS MPP( 16, 0xd, 1, 0, 1, 1, 1, 1 )
+
+#define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP17_SD_D3 MPP( 17, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 1, 0, 1, 1, 1 )
+
+#define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP18_NF_IO0 MPP( 18, 0x1, 1, 1, 1, 1, 1, 1 )
+
+#define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP19_NF_IO1 MPP( 19, 0x1, 1, 1, 1, 1, 1, 1 )
+
+#define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP20_TSMP0 MPP( 20, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP20_GE1_0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP20_AUDIO_SPDIFI MPP( 20, 0x4, 1, 0, 0, 0, 1, 1 )
+#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 1, 0, 0, 1, 1 )
+
+#define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP21_TSMP1 MPP( 21, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP21_GE1_1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP21_AUDIO_SPDIFO MPP( 21, 0x4, 0, 1, 0, 0, 1, 1 )
+#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 1, 0, 1, 1, 1 )
+
+#define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP22_TSMP2 MPP( 22, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP22_GE1_2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP22_AUDIO_SPDIFRMKCLK MPP( 22, 0x4, 0, 1, 0, 0, 1, 1 )
+#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 1, 0, 0, 1, 1 )
+
+#define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP23_TSMP3 MPP( 23, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 1, 0, 0, 0, 1, 1 )
+#define MPP23_GE1_3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP23_AUDIO_I2SBCLK MPP( 23, 0x4, 0, 1, 0, 0, 1, 1 )
+#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 1, 0, 1, 1, 1 )
+
+#define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP24_TSMP4 MPP( 24, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP24_TDM_SPI_CS0 DEV( 24, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP24_GE1_4 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP24_AUDIO_I2SDO MPP( 24, 0x4, 0, 1, 0, 0, 1, 1 )
+
+#define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP25_TSMP5 MPP( 25, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP25_GE1_5 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP25_AUDIO_I2SLRCLK MPP( 25, 0x4, 0, 1, 0, 0, 1, 1 )
+
+#define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP26_TSMP6 MPP( 26, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 1, 0, 0, 0, 1, 1 )
+#define MPP26_GE1_6 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP26_AUDIO_I2SMCLK MPP( 26, 0x4, 0, 1, 0, 0, 1, 1 )
+
+#define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP27_TSMP7 MPP( 27, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP27_GE1_7 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP27_AUDIO_I2SDI MPP( 27, 0x4, 1, 0, 0, 0, 1, 1 )
+
+#define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP28_TSMP8 MPP( 28, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1 )
+#define MPP28_GE1_8 MPP( 28, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP28_AUDIO_EXTCLK MPP( 28, 0x4, 1, 0, 0, 0, 1, 1 )
+
+#define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP29_TSMP9 MPP( 29, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1 )
+#define MPP29_GE1_9 MPP( 29, 0x3, 0, 0, 0, 1, 1, 1 )
+
+#define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP30_TSMP10 MPP( 30, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP30_TDM_PCLK MPP( 30, 0x2, 1, 1, 0, 0, 1, 1 )
+#define MPP30_GE1_10 MPP( 30, 0x3, 0, 0, 0, 1, 1, 1 )
+
+#define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP31_TSMP11 MPP( 31, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP31_TDM_FS MPP( 31, 0x2, 1, 1, 0, 0, 1, 1 )
+#define MPP31_GE1_11 MPP( 31, 0x3, 0, 0, 0, 1, 1, 1 )
+
+#define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP32_TSMP12 MPP( 32, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP32_TDM_DRX MPP( 32, 0x2, 1, 0, 0, 0, 1, 1 )
+#define MPP32_GE1_12 MPP( 32, 0x3, 0, 0, 0, 1, 1, 1 )
+
+#define MPP33_GPIO MPP( 33, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP33_GE1_13 MPP( 33, 0x3, 0, 0, 0, 1, 1, 1 )
+
+#define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP34_GE1_14 MPP( 34, 0x3, 0, 0, 0, 1, 1, 1 )
+
+#define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP35_GE1_15 MPP( 35, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 1, 0, 1, 1, 1 )
+#define MPP35_MII0_RXERR MPP( 35, 0xc, 1, 0, 1, 1, 1, 1 )
+
+#define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP36_TSMP0 MPP( 36, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP36_AUDIO_SPDIFI MPP( 36, 0x4, 1, 0, 1, 0, 0, 1 )
+
+#define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP37_TSMP1 MPP( 37, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP37_AUDIO_SPDIFO MPP( 37, 0x4, 0, 1, 1, 0, 0, 1 )
+
+#define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP38_TSMP2 MPP( 38, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP38_AUDIO_SPDIFRMLCLK MPP( 38, 0x4, 0, 1, 1, 0, 0, 1 )
+
+#define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP39_TSMP3 MPP( 39, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP39_AUDIO_I2SBCLK MPP( 39, 0x4, 0, 1, 1, 0, 0, 1 )
+
+#define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP40_TSMP4 MPP( 40, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP40_AUDIO_I2SDO MPP( 40, 0x4, 0, 1, 1, 0, 0, 1 )
+
+#define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP41_TSMP5 MPP( 41, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 1, 0, 0, 0, 0, 1 )
+#define MPP41_AUDIO_I2SLRC MPP( 41, 0x4, 0, 1, 1, 0, 0, 1 )
+
+#define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP42_TSMP6 MPP( 42, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP42_AUDIO_I2SMCLK MPP( 42, 0x4, 0, 1, 1, 0, 0, 1 )
+
+#define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP43_TSMP7 MPP( 43, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1 )
+#define MPP43_AUDIO_I2SDI MPP( 43, 0x4, 1, 0, 1, 0, 0, 1 )
+
+#define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP44_TSMP8 MPP( 44, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1 )
+#define MPP44_AUDIO_EXTCLK MPP( 44, 0x4, 1, 0, 1, 0, 0, 1 )
+
+#define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1 )
+#define MPP45_TSMP9 MPP( 45, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP45_TDM_PCLK MPP( 45, 0x2, 1, 1, 0, 0, 0, 1 )
+
+#define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1 )
+#define MPP46_TSMP10 MPP( 46, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP46_TDM_FS MPP( 46, 0x2, 1, 1, 0, 0, 0, 1 )
+
+#define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1 )
+#define MPP47_TSMP11 MPP( 47, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP47_TDM_DRX MPP( 47, 0x2, 1, 0, 0, 0, 0, 1 )
+
+#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1 )
+#define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP48_TDM_DTX MPP( 48. 0x2, 0, 1, 0, 0, 0, 1 )
+
+#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1 )
+#define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP49_PTP_CLK MPP( 49, 0x5, 1, 0, 0, 0, 0, 1 )
+
+#define MPP_MAX 49
+
+void kirkwood_mpp_conf(unsigned int *mpp_list);
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/spi.h b/include/asm-arm/arch-kirkwood/spi.h
new file mode 100644
index 0000000..8719279
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/spi.h
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * Derived from drivers/spi/mpc8xxx_spi.c
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __KW_SPI_H__
+#define __KW_SPI_H__
+
+/* SPI Registers on kirkwood SOC */
+struct kwspi_registers {
+ u32 ctrl; /* 0x10600 */
+ u32 cfg; /* 0x10604 */
+ u32 dout; /* 0x10608 */
+ u32 din; /* 0x1060c */
+ u32 irq_cause; /* 0x10610 */
+ u32 irq_mask; /* 0x10614 */
+};
+
+#define KWSPI_CLKPRESCL_MASK 0x1f
+#define KWSPI_CSN_ACT 1 /* Activates serial memory interface */
+#define KWSPI_SMEMRDY (1 << 1) /* SerMem Data xfer ready */
+#define KWSPI_IRQUNMASK 1 /* unmask SPI interrupt */
+#define KWSPI_IRQMASK 0 /* mask SPI interrupt */
+#define KWSPI_SMEMRDIRQ 1 /* SerMem data xfer ready irq */
+#define KWSPI_XFERLEN_1BYTE 0
+#define KWSPI_XFERLEN_2BYTE (1 << 5)
+#define KWSPI_XFERLEN_MASK (1 << 5)
+#define KWSPI_ADRLEN_1BYTE 0
+#define KWSPI_ADRLEN_2BYTE 1 << 8
+#define KWSPI_ADRLEN_3BYTE 2 << 8
+#define KWSPI_ADRLEN_4BYTE 3 << 8
+#define KWSPI_ADRLEN_MASK 3 << 8
+#define KWSPI_TIMEOUT 10000
+
+#endif /* __KW_SPI_H__ */
diff --git a/include/asm-arm/cache.h b/include/asm-arm/cache.h
new file mode 100644
index 0000000..205b5da
--- /dev/null
+++ b/include/asm-arm/cache.h
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _ASM_CACHE_H
+#define _ASM_CACHE_H
+
+#include <asm/system.h>
+
+/*
+ * Invalidate L2 Cache using co-proc instruction
+ */
+static inline void invalidate_l2_cache(void)
+{
+ unsigned int val=0;
+
+ asm volatile("mcr p15, 1, %0, c15, c11, 0 @ invl l2 cache"
+ : : "r" (val) : "cc");
+ isb();
+}
+#endif /* _ASM_CACHE_H */
diff --git a/include/common.h b/include/common.h
index 30fff7d..9e4b859 100644
--- a/include/common.h
+++ b/include/common.h
@@ -294,6 +294,7 @@ void pciinfo (int, int);
#endif
#endif
+int arch_misc_init (void);
int misc_init_f (void);
int misc_init_r (void);
diff --git a/lib_arm/board.c b/lib_arm/board.c
index e081fbc..5c3bfec 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -399,6 +399,10 @@ void start_armboot (void)
console_init_r (); /* fully init console as a device */
+#if defined(CONFIG_ARCH_MISC_INIT)
+ /* miscellaneous arch dependent initialisations */
+ arch_misc_init ();
+#endif
#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
misc_init_r ();
--
1.5.3.3
More information about the U-Boot
mailing list