[U-Boot] [PATCH] at91: move cpu info print to cpu

Jean-Christophe PLAGNIOL-VILLARD plagnioj at jcrosoft.com
Fri May 22 18:09:26 CEST 2009


Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
 board/ronetix/pm9263/pm9263.c |    7 -------
 cpu/arm926ejs/at91/cpu.c      |   17 +++++++++++++++++
 include/configs/pm9263.h      |    1 +
 3 files changed, 18 insertions(+), 7 deletions(-)

diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
index d24ef9a..d2598a0 100644
--- a/board/ronetix/pm9263/pm9263.c
+++ b/board/ronetix/pm9263/pm9263.c
@@ -382,15 +382,8 @@ int board_eth_init(bd_t *bis)
 int checkboard (void)
 {
 	char *ss;
-	char buf[32];
 
 	printf ("Board : Ronetix PM9263\n");
-	printf ("Crystal frequency: %8s MHz\n",
-					strmhz(buf, get_main_clk_rate()));
-	printf ("CPU clock        : %8s MHz\n",
-					strmhz(buf, get_cpu_clk_rate()));
-	printf ("Master clock     : %8s MHz\n",
-					strmhz(buf, get_mck_clk_rate()));
 
 	switch (gd->fb_base) {
 	case PHYS_PSRAM:
diff --git a/cpu/arm926ejs/at91/cpu.c b/cpu/arm926ejs/at91/cpu.c
index a9705cf..594103e 100644
--- a/cpu/arm926ejs/at91/cpu.c
+++ b/cpu/arm926ejs/at91/cpu.c
@@ -12,3 +12,20 @@ int arch_cpu_init(void)
 	return at91_clock_init(0);
 #endif
 }
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	char buf[32];
+
+	printf("CPU: %s\n", AT91_CPU_NAME);
+	printf("Crystal frequency: %8s MHz\n",
+					strmhz(buf, get_main_clk_rate()));
+	printf("CPU clock        : %8s MHz\n",
+					strmhz(buf, get_cpu_clk_rate()));
+	printf("Master clock     : %8s MHz\n",
+					strmhz(buf, get_mck_clk_rate()));
+
+	return 0;
+}
+#endif
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index d60c417..f0dbe81 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -29,6 +29,7 @@
 #define __CONFIG_H
 
 /* ARM asynchronous clock */
+#define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
 #define MASTER_PLL_DIV		15
-- 
1.6.2.4



More information about the U-Boot mailing list