[U-Boot] [PATCH v2 3/3] MX31: Add NAND SPL boot support to i.MX31 PDK board.

[Magnus Lilja]

>> >> diff --git a/board/freescale/mx31pdk/config.mk b/board/freescale/mx31pdk/config.mk
>> >> index d34dc02..dcaa09f 100644
>> >> --- a/board/freescale/mx31pdk/config.mk
>> >> +++ b/board/freescale/mx31pdk/config.mk
>> >> @@ -1 +1,5 @@
>> >> +ifdef CONFIG_NAND_SPL
>> >> +TEXT_BASE = 0x87ec0000
>> >> +else
>> >>  TEXT_BASE = 0x87f00000
>> >> +endif
>> >> +
>> >> +.macro DELAY loops
>> >> +     ldr     r2, =\loops
>> >> +1:
>> >> +     subs    r2, r2, #1
>> >> +     nop
>> >> +     bcs     1b
>> >> +.endm
>> > NACK
>> > as already reply to the kirwood patch we must have common macro
>> > please use the attached file as based work
>>
>> I don't see any file attached to you e-mail, so which attached file?
>> Can you point to the relevant kirkwood patch? Is the patch in some
>> git-tree?
> no not yet
> so I've forget to re-attached it

There's a minor problem in the timer macro, fixed by replacing "sub"
with "subs".

Are you OK with me posting the file as a separate patch with your
From+signed-off as part of my patch series or will you add the file to
arm-next yourself?

Regards, Magnus