[U-Boot] SMDK2410 board
David Kaplan
davkaplan at gmail.com
Sun Nov 1 08:39:12 CET 2009
I'm trying to get u-boot running on a smdk2410-based board.
I'm using openocd and jtag and am trying to load u-boot into ram as follows:
load_image u-boot.bin 0x33f80000
Which *seems* to work:
103668 bytes written at address 0x33f80000
downloaded 103668 byte in 0.500045s
I then try to run it by using resume 0x33f80000 but it doesn't seem that
u-boot is executing.
What am I doing wrong?
More information about the U-Boot
mailing list