November 2009 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Nov 1 02:00:16 CET 2009
Ending: Mon Nov 30 23:53:08 CET 2009
Messages: 1339

• [U-Boot] Cisco job Opportunity - Senior Software Engineer - Platform Software (uboot, kernel, driver) - 3 Positions   Sadakathullah Mohamed Ali (mohamali)
• [U-Boot] [PATCH] S3C6400/SMDK6400: fix stack_setup in start.S   "Seunghyeon Rhee (이승현)"
• [U-Boot] [PATCH] NET: Fix MAC addr handling for smc911x   "Seunghyeon Rhee (이승현)"
• [U-Boot] [PATCH] samsung: move DRAM parameters   "Seunghyeon Rhee (이승현)"
• [U-Boot] [PATCH] samsung: move DRAM parameters   "Seunghyeon Rhee (이승현)"
• [U-Boot] [PATCH] fix flash_sect_erase() to display correct message   "Seunghyeon Rhee (이승현)"
• [U-Boot] [PATCH] samsung: fix DMC1_MEM_CFG for s3c64xx   "Seunghyeon Rhee (이승현)"
• [U-Boot] ppc_4xx-objcopy: u-boot.bin: Bad value   alan A. A
• [U-Boot] DM9000x driver entering infinite loop   alan A. A
• [U-Boot] Best way of making some drivers common across kirkwood and orion5x SoCs?   Albert ARIBAUD
• [U-Boot] Best way of making some drivers common across kirkwood and orion5x SoCs?   Albert ARIBAUD
• [U-Boot] Best way of making some drivers common across kirkwood and orion5x SoCs?   Albert ARIBAUD
• [U-Boot] Best way of making some drivers common across kirkwood and orion5x SoCs?   Albert ARIBAUD
• [U-Boot] [PATCH] Initial support for Orion5x SoC and EDMini board   Albert ARIBAUD
• [U-Boot] [PATCH] Initial support for Orion5x SoC and EDMini board   Albert ARIBAUD
• [U-Boot] [PATCH V2 1/3 CORRECTED] Initial support for Marvell Orion5x SoC   Albert ARIBAUD
• [U-Boot] [PATCH V2 1/3] Initial support for Marvell Orion5x SoC   Albert ARIBAUD
• [U-Boot] [PATCH V2 3/3] Add support for the LaCie ED Mini V2 board   Albert ARIBAUD
• [U-Boot] [PATCH V2 3/3] Add support for the LaCie ED Mini V2 board   Albert ARIBAUD
• [U-Boot] [PATCH V2 1/3] Initial support for Marvell Orion5x SoC   Albert ARIBAUD
• [U-Boot] [PATCH V2 1/3] Initial support for Marvell Orion5x SoC   Albert ARIBAUD
• [U-Boot] [PATCH V2 3/3] Add support for the LaCie ED Mini V2 board   Albert ARIBAUD
• [U-Boot] [PATCH V2 3/3] Add support for the LaCie ED Mini V2 board   Albert ARIBAUD
• [U-Boot] Your mailbox has exceeded the storage limit   System Administrator
• [U-Boot] PATCH mtd CFI flash: timeout calculation underflow if imprecise 1kHz timer: fix   Renato Andreola
• [U-Boot] How to change splash screen in u-boot   Angelo
• [U-Boot] Ttftp problem while retrieving a file   Abraham Arce
• [U-Boot] Ttftp problem while retrieving a file   Abraham Arce
• [U-Boot] Ttftp problem while retrieving a file   Abraham Arce
• [U-Boot] [PATCH] Initial support for Orion5x SoC and EDMini board   Albert Aribaud
• [U-Boot] [PATCH V2 0/3] Support for Marvell Orion5x SoC and LaCie ED Mini V2 board   Albert Aribaud
• [U-Boot] [PATCH V2 1/3] Initial support for Marvell Orion5x SoC   Albert Aribaud
• [U-Boot] [PATCH V2 2/3] Add Orion5x support to 16550 serial device driver   Albert Aribaud
• [U-Boot] [PATCH V2 3/3] Add support for the LaCie ED Mini V2 board   Albert Aribaud
• [U-Boot] [PATCH V2 1/3 CORRECTED] Initial support for Marvell Orion5x SoC   Albert Aribaud
• [U-Boot] [PATCH 1/3] tools/mkimage: Assume FDT image type for FIT images   Stefano Babic
• [U-Boot] Quick sanity test after my NAND patches   Jerry Van Baren
• [U-Boot] Quick sanity test after my NAND patches   Jerry Van Baren
• [U-Boot] mtest issue   Jerry Van Baren
• [U-Boot] dts support in u-boot   Jerry Van Baren
• [U-Boot] work and live in canada   Brenda Barreth
• [U-Boot] [PATCH] Add I2C multibus support for OMAP2/3 boards   Dirk Behme
• [U-Boot] [PATCH] OMAP2/3: I2C: Add support for second and third bus   Dirk Behme
• [U-Boot] [PATCH] Add I2C multibus support for OMAP2/3 boards   Dirk Behme
• [U-Boot] [PATCH v2] OMAP2/3: I2C: Add support for second and third bus   Dirk Behme
• [U-Boot] [PATCH] Add I2C multibus support for OMAP2/3 boards   Dirk Behme
• [U-Boot] Error while compiling U-Boot for beagleboard   Dirk Behme
• [U-Boot] [PATCH v2] OMAP3: add CM-T35 board   Dirk Behme
• [U-Boot] [PATCH] OMAP3: BeagleBoard: Add expansion board auto detection   Dirk Behme
• [U-Boot] TFTP on beagle board   Dirk Behme
• [U-Boot] any potential problems with beagle using OMAP34XX macros?   Dirk Behme
• [U-Boot] [PATCH] README: Give an explicit example of adding a new board.   Dirk Behme
• [U-Boot] [PATCH] OMAP3EVM: Added NAND support   Dirk Behme
• [U-Boot] [PATCH] OMAP3EVM: Added NAND support   Dirk Behme
• [U-Boot] status several (bugfix) patches...   Remy Bohmer
• [U-Boot] status several (bugfix) patches...   Remy Bohmer
• [U-Boot] v3 OMAP USB   Remy Bohmer
• [U-Boot] v3 OMAP USB   Remy Bohmer
• [U-Boot] v3 OMAP USB   Remy Bohmer
• [U-Boot] [PATCH 10/10] omap3evm: musb: add USB config   Remy Bohmer
• [U-Boot] AT91 runnable out of RAM ?   Remy Bohmer
• [U-Boot] [PATCH] Make the generic unaligned access code safe for unaligned access   Remy Bohmer
• [U-Boot] [PATCH] EXT2FS: fix inode size for ext2fs rev#0   Michael Brandt
• [U-Boot] Problem with SD card and ext2ls   Michael Brandt
• [U-Boot] [PATCH] NAND: fix "raw" reads with ECC syndrome layouts   David Brownell
• [U-Boot] [PATCH] 86xx: Remove redundant code in initdram   Becky Bruce
• [U-Boot] [PATCH] 85xx: Remove unused CONFIG_ASSUME_AMD_FLASH from config files   Becky Bruce
• [U-Boot] include/asm-blackfin/mmc.h???   Cai, Cliff
• [U-Boot] [PATCH] flash.h: pull in common.h for types   J. William Campbell
• [U-Boot] Database of emergency medicine physicians and many more specialties   Araceli Carrier
• [U-Boot] [PATCH] Removes dead code in the file common/cmd_i2c.c   Pratap Chandu
• [U-Boot] [PATCH] EXT2FS: fix inode size for ext2fs rev#0   Dan Christensen
• [U-Boot] [PATCH v8 1/2] arm: A320: driver for FTRTC010 real time clock   Po-Yu Chuang
• [U-Boot] [PATCH v8 2/2] arm: A320: Add support for Faraday A320 evaluation board   Po-Yu Chuang
• [U-Boot] [PATCH v7 2/2] arm: A320: Add support for Faraday A320 evaluation board   Po-Yu Chuang
• [U-Boot] [PATCH v7 2/2] arm: A320: Add support for Faraday A320 evaluation board   Po-Yu Chuang
• [U-Boot] [PATCH v3] crc32: Impl. linux optimized crc32()   Thiago A. Corrêa
• [U-Boot] [PATCH v3] crc32: Impl. linux optimized crc32()   Thiago A. Corrêa
• [U-Boot] Contact List of otolaryngologists and 34 more specialties   Lacy Crum
• [U-Boot] SDCARD Support - MPC8315e   Marcos Cunha
• [U-Boot] SDCARD Support - MPC8315e   Marcos Cunha
• [U-Boot] MMC driver with SPI controller - MPC8315   Marcos Cunha
• [U-Boot] [PATCH 3/7] 83xx/85xx/86xx: Add ECC support   Liu Dave-R63238
• [U-Boot] [PATCH 3/7] 83xx/85xx/86xx: Add ECC support   Liu Dave-R63238
• [U-Boot] [PATCH 3/7] 83xx/85xx/86xx: Add ECC support   Liu Dave-R63238
• [U-Boot] [PATCH 3/7] 83xx/85xx/86xx: Add ECC support   Liu Dave-R63238
• [U-Boot] [PATCH 4/7] 83xx: Migrate CONFIG_DDR_ECC_CMD toCONFIG_EDAC_FSL_ECC   Liu Dave-R63238
• [U-Boot] [PATCH 3/7] 83xx/85xx/86xx: Add ECC support   Liu Dave-R63238
• [U-Boot] [PATCH] fsl-ddr: Fix power-down and ODT timing settings   Liu Dave-R63238
• [U-Boot] SDCARD Support - MPC8315e   Liu Dave-R63238
• [U-Boot] SDCARD Support - MPC8315e   Liu Dave-R63238
• [U-Boot] [PATCH] fsl-ddr: Fix power-down and ODT timing settings   Liu Dave-R63238
• [U-Boot] [PATCH] README: Update the list of directories.   Robert P. J. Day
• [U-Boot] any potential problems with beagle using OMAP34XX macros?   Robert P. J. Day
• [U-Boot] [PATCH] README: Give an explicit example of adding a new board.   Robert P. J. Day
• [U-Boot] [PATCH] README: Give an explicit example of adding a new board.   Robert P. J. Day
• [U-Boot] [PATCH] README: Add an example of adding a new board (BeagleBoard).   Robert P. J. Day
• [U-Boot] [PATCH v2] README: Add an example of adding a new board.   Robert P. J. Day
• [U-Boot] [PATCH] help: Correct syntax of nandecc help output.   Robert P. J. Day
• [U-Boot] [PATCH v2] README: Add an example of adding a new board.   Robert P. J. Day
• [U-Boot] is CONFIG_DATAFLASH_MMC_SELECT actually being used anywhere?   Robert P. J. Day
• [U-Boot] why is the compilation of cmd_pcmcia.c hardcoded?   Robert P. J. Day
• [U-Boot] [PATCH] Condense some lines in common/Makefile for readability.   Robert P. J. Day
• [U-Boot] [PATCH v2] Condense some lines in common/Makefile for readability.   Robert P. J. Day
• [U-Boot] difference between V_PROMPT and CONFIG_SYS_PROMPT?   Robert P. J. Day
• [U-Boot] [PATCH] Remove entirely superfluous preprocessor tests from cmd_*.c files.   Robert P. J. Day
• [U-Boot] [PATCH] Remove entirely superfluous preprocessor tests from cmd_*.c files.   Robert P. J. Day
• [U-Boot] [PATCH v2] Remove entirely superfluous preprocessor tests from some cmd_*.c files.   Robert P. J. Day
• [U-Boot] [PATCH] Move preprocessor test for cmd_nand.c to Makefile   Robert P. J. Day
• [U-Boot] [PATCH] Move the preprocessor test for building flash.c to the Makefile.   Robert P. J. Day
• [U-Boot] [PATCH] Move the preprocessor test for building flash.c to the Makefile.   Robert P. J. Day
• [U-Boot] [PATCH] BeagleBoard: Add a comment explaining the use of "OMAP34XX" macros.   Robert P. J. Day
• [U-Boot] [PATCH] Remove superfluous use of V_PROMPT macros in config files.   Robert P. J. Day
• [U-Boot] [PATCH] BeagleBoard: Add a comment explaining the use of "OMAP34XX" macros.   Robert P. J. Day
• [U-Boot] [PATCH v2] BeagleBoard: Add a comment explaining the use of "OMAP34XX" macros.   Robert P. J. Day
• [U-Boot] [PATCH] BeagleBoard: Add a comment explaining the use of "OMAP34XX" macros.   Robert P. J. Day
• [U-Boot] confused ... how do some CONFIG settings "implicitly" set others?   Robert P. J. Day
• [U-Boot] [PATCH v2] BeagleBoard: Add a comment explaining the use of "OMAP34XX" macros.   Robert P. J. Day
• [U-Boot] possible typo in beagle identification?   Robert P. J. Day
• [U-Boot] confused ... how do some CONFIG settings "implicitly" set others?   Robert P. J. Day
• [U-Boot] is "CONFIG_OMAP_INNOVATOR" a typo or not?   Robert P. J. Day
• [U-Boot] SMDK2410 board   Wolfgang Denk
• [U-Boot] [PATCH] mkconfig: deny messed up ARCH definition   Wolfgang Denk
• [U-Boot] Can't see NFS packages with wireshark   Wolfgang Denk
• [U-Boot] [PATCH] ARM: fix build error with gcc-4.4.2 about inline function declared weak   Wolfgang Denk
• [U-Boot] [PATCH 04/10] ARM Add New Board GEC2410   Wolfgang Denk
• [U-Boot] [STATUS] v2009.11-rc1 is out   Wolfgang Denk
• [U-Boot] [PATCH 04/10] ARM Add New Board GEC2410   Wolfgang Denk
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   Wolfgang Denk
• [U-Boot] [PATCH] Don't inline weak symbols   Wolfgang Denk
• [U-Boot] [PATCH (repost)] Nomadik: fix reset_timer()   Wolfgang Denk
• [U-Boot] [PATCH 08/10] ARM Add New Board GEC2410   Wolfgang Denk
• [U-Boot] [PATCH (repost)] Nomadik: fix reset_timer()   Wolfgang Denk
• [U-Boot] [PATCH] crc32: Impl. linux optimized crc32()   Wolfgang Denk
• [U-Boot] at91SAM7S9263B-EK + u-boot using sd card: linux uncompress ... crc error   Wolfgang Denk
• [U-Boot] [PATCH 0/3] No GOT in IRQ and use r12 as GOT ptr   Wolfgang Denk
• [U-Boot] [PATCH] Adding support for Linuxstamp II 9260   Wolfgang Denk
• [U-Boot] multiple partitions in mtdparts   Wolfgang Denk
• [U-Boot] [RFC] env: Group environment variables   Wolfgang Denk
• [U-Boot] standalone apps and their use of exported functions   Wolfgang Denk
• [U-Boot] standalone apps and their use of exported functions   Wolfgang Denk
• [U-Boot] standalone apps and their use of exported functions   Wolfgang Denk
• [U-Boot] AT91 Rework   Wolfgang Denk
• [U-Boot] [PATCH] Save environment data to mmc.   Wolfgang Denk
• [U-Boot] [RFC] env: Group environment variables   Wolfgang Denk
• [U-Boot] Pull request - mpc85xx (for 200911 release) (updated)   Wolfgang Denk
• [U-Boot] [PATCH] use "boot selecr" jumper on NGW100 to select USART   Wolfgang Denk
• [U-Boot] AT91 Rework   Wolfgang Denk
• [U-Boot] [PATCH] v2 Linuxstamp II 9260 support   Wolfgang Denk
• [U-Boot] [PATCH 2/2] ARM: fix build error with gcc-4.4.2 about inline function declared weak   Wolfgang Denk
• [U-Boot] [PATCH 1/2] ARM Conditionally compile board LED functions   Wolfgang Denk
• [U-Boot] [RFC 3/5] CAN device driver for the SJA1000   Wolfgang Denk
• [U-Boot] [RFC] env: Group environment variables   Wolfgang Denk
• [U-Boot] [PATCH 2/2] ARM: fix build error with gcc-4.4.2 about inline function declared weak   Wolfgang Denk
• [U-Boot] [PATCH 1/2] ARM Conditionally compile board LED functions   Wolfgang Denk
• [U-Boot] [PATCH] Fix build failure in examples/standalone   Wolfgang Denk
• [U-Boot] [PATCH] Fix build failure in examples/standalone   Wolfgang Denk
• [U-Boot] [PATCH] Fix build failure in examples/standalone   Wolfgang Denk
• [U-Boot] Quick sanity test after my NAND patches   Wolfgang Denk
• [U-Boot] Build error found when using CONFIG_CMD_UBIFS   Wolfgang Denk
• [U-Boot] use "boot select" jumper on NGW100 to select USART   Wolfgang Denk
• [U-Boot] AT91 Rework   Wolfgang Denk
• [U-Boot] ARM pull request   Wolfgang Denk
• [U-Boot] use "boot select" jumper on NGW100 to select USART   Wolfgang Denk
• [U-Boot] [PATCH 2/2] ARM: fix build error with gcc-4.4.2 about inline function declared weak   Wolfgang Denk
• [U-Boot] loading applications sequentially.   Wolfgang Denk
• [U-Boot] framework for serial flash   Wolfgang Denk
• [U-Boot] [PATCH] omap3: add CM-T35 board   Wolfgang Denk
• [U-Boot] [PATCH v2] OMAP3: add CM-T35 board   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx/master   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx/next   Wolfgang Denk
• [U-Boot] Pull request - net   Wolfgang Denk
• [U-Boot] u-boot: How to read file from FAT filesystem on NorFlash MTD partition   Wolfgang Denk
• [U-Boot] [PATCH v4] OMAP3: add CM-T35 board   Wolfgang Denk
• [U-Boot] ARM pull request   Wolfgang Denk
• [U-Boot] Pull request - mpc85xx (for v2009.11)   Wolfgang Denk
• [U-Boot] Pull request - mpc85xx (for v2009.11)(updated)   Wolfgang Denk
• [U-Boot] Pull request - net [for 2009.11]   Wolfgang Denk
• [U-Boot] Pull request: nand flash next   Wolfgang Denk
• [U-Boot] [STATUS] Release date slippage   Wolfgang Denk
• [U-Boot] u-boot: How to read file from FAT filesystem on NorFlash MTD partition   Wolfgang Denk
• [U-Boot] [PATCH] flash.h: pull in common.h for types   Wolfgang Denk
• [U-Boot] [PATCH 3/3] [OneNAND] Flex-OneNAND boundary settings   Wolfgang Denk
• [U-Boot] [PATCH 1/4] ARM Add New Board GEC2410   Wolfgang Denk
• [U-Boot] [PATCH 2/4] ARM Add New Board GEC2410   Wolfgang Denk
• [U-Boot] [PATCH 3/4] ARM Add New Board GEC2410   Wolfgang Denk
• [U-Boot] [RFC] env: Group environment variables   Wolfgang Denk
• [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27   Wolfgang Denk
• [U-Boot] [PATCH] README: Give an explicit example of adding a new board.   Wolfgang Denk
• [U-Boot] [PATCH] README: Add an example of adding a new board (BeagleBoard).   Wolfgang Denk
• [U-Boot] [PATCH v2] README: Add an example of adding a new board.   Wolfgang Denk
• [U-Boot] [PATCH] fix flash_sect_erase() to display correct message   Wolfgang Denk
• [U-Boot] [PATCH V2 1/3 CORRECTED] Initial support for Marvell Orion5x SoC   Wolfgang Denk
• [U-Boot] [PATCH v4] OMAP3: add CM-T35 board   Wolfgang Denk
• [U-Boot] [PATCH] flash.h: pull in common.h for types   Wolfgang Denk
• [U-Boot] [PATCH] crc32: Make crc32 build on non Linux too   Wolfgang Denk
• [U-Boot] How to download image to U-Boot   Wolfgang Denk
• [U-Boot] Pull request - i2c [for next]   Wolfgang Denk
• [U-Boot] [PATCH] fix flash_sect_erase() to display correct message   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx/master   Wolfgang Denk
• [U-Boot] Please pull u-boot-cfi-flash/master   Wolfgang Denk
• [U-Boot] [PATCH] flash.h: pull in common.h for types   Wolfgang Denk
• [U-Boot] How to download image to U-Boot   Wolfgang Denk
• [U-Boot] [PATCH V5 1/4] add TI DA8xx support: DA8xx includes   Wolfgang Denk
• [U-Boot] [PATCH V5 1/4] add TI DA8xx support: DA8xx includes   Wolfgang Denk
• [U-Boot] [PATCH v2] OMAP3: pandora: fix booting without serial attached   Wolfgang Denk
• [U-Boot] [PATCH 3/4 v2] DA8xx: Add MUSB host support   Wolfgang Denk
• [U-Boot] [PATCH] Clarify applicable licensing terms in COPYING file.   Wolfgang Denk
• [U-Boot] [PATCH] Clarify applicable licensing terms in COPYING file.   Wolfgang Denk
• [U-Boot] [PATCH] Davinci: Configurable NAND chip selects   Wolfgang Denk
• [U-Boot] [PATCH V2 1/3] Initial support for Marvell Orion5x SoC   Wolfgang Denk
• [U-Boot] [PATCH V2 3/3] Add support for the LaCie ED Mini V2 board   Wolfgang Denk
• [U-Boot] [PATCH 3/4 v2] DA8xx: Add MUSB host support   Wolfgang Denk
• [U-Boot] [PATCH] flash.h: pull in common.h for types   Wolfgang Denk
• [U-Boot] [PATCH] fix flash_sect_erase() to display correct message   Wolfgang Denk
• [U-Boot] [PATCH v2] README: Add an example of adding a new board.   Wolfgang Denk
• [U-Boot] [PATCH 1/4] ARM Add New Board GEC2410   Wolfgang Denk
• [U-Boot] [PATCH V5 1/4] add TI DA8xx support: DA8xx includes   Wolfgang Denk
• [U-Boot] [PATCH] crc32: Make crc32 build on non Linux too   Wolfgang Denk
• [U-Boot] Problem in Building the Bootloader for the NAND Flash MPC8313ERDB Board   Wolfgang Denk
• [U-Boot] Problem with SD card and ext2ls   Wolfgang Denk
• [U-Boot] Problem with SD card and ext2ls   Wolfgang Denk
• [U-Boot] confused ... how do some CONFIG settings "implicitly" set others?   Wolfgang Denk
• [U-Boot] ppc_4xx-objcopy: u-boot.bin: Bad value   Wolfgang Denk
• [U-Boot] ppc_4xx-objcopy: u-boot.bin: Bad value   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx/next   Wolfgang Denk
• [U-Boot] Pull request: nand flash next   Wolfgang Denk
• [U-Boot] [PATCH 2/2] 85xx: add the nfsboot/ramboot to default environment   Wolfgang Denk
• [U-Boot] PATCH Nios2 kernel bootstrap error due to missing processor data cache flush: fix   Wolfgang Denk
• [U-Boot] [PATCH] at91: Extended soft_i2c driver for AT91SAM9263 SoC   Wolfgang Denk
• [U-Boot] [PATCH] 85xx: Enable the DDR3 SPD support for P2020DS board   Wolfgang Denk
• [U-Boot] [PATCH 1/1] avr32/hsdramc: Move conditional compilation to Makefile   Wolfgang Denk
• [U-Boot] [RFC] 83xx: uec: miiphybb: Added support for bitBang SMI and uec SMI enabled at the same time.   Wolfgang Denk
• [U-Boot] [PATCH] Added preliminary support to EHCI USB FSL controller for platform MPC5121   Wolfgang Denk
• [U-Boot] [PATCH 1/3] 83xx: Default to using DMA to initialize SDRAM   Wolfgang Denk
• [U-Boot] [PATCH v2 2/6] Move lib_<ARCH> directories to lib/<ARCH>   Wolfgang Denk
• [U-Boot] [RFC/PATCH 1/2]: Arm: Kirkwood: Split PHY-related initialization to a common file   Wolfgang Denk
• [U-Boot] [PATCH 02/03 v2] Add support for Olimex SAM9-L9261 SBC   Wolfgang Denk
• [U-Boot] [PATCH] Add inverted clock polarity support for Atmel LCD driver   Wolfgang Denk
• [U-Boot] [PATCH] AT91: revise serial lines pullup configuration,   Wolfgang Denk
• [U-Boot] [U-boot][PATCH] AMCC ppc440SPe PCIe PLL lock error   Wolfgang Denk
• [U-Boot] [PATCH] MIMC200: set default fbmem value   Wolfgang Denk
• [U-Boot] PATCH mtd CFI flash: timeout calculation underflow if imprecise 1kHz timer: fix   Wolfgang Denk
• [U-Boot] [PATCH v3] AT91: Add SD/MMC controller support   Wolfgang Denk
• [U-Boot] An error in u-boot-2009.08/cpu/arm920t/start.S   Wolfgang Denk
• [U-Boot] [PATCH v7 1/2] arm: A320: driver for FTRTC010 real time clock   Wolfgang Denk
• [U-Boot] [PATCH v7 2/2] arm: A320: Add support for Faraday A320 evaluation board   Wolfgang Denk
• [U-Boot] [PATCH][v4] mpc8260: move FDT memory node fixup into common CPU code.   Wolfgang Denk
• [U-Boot] [PATCH] Generic udelay() with watchdog support   Wolfgang Denk
• [U-Boot] [PATCH v3] ppc/85xx: PIO Support for FSL eSDHC Controller Driver   Wolfgang Denk
• [U-Boot] [PATCH V2 3/3] lcd: remove '#if 0' 32-bit scroll, now memcpy does it   Wolfgang Denk
• [U-Boot] [PATCH] AT92RM9200 EMAC driver for NET MULTI API   Wolfgang Denk
• [U-Boot] [PATCH 1/8] video: add amba-clcd prime-cell   Wolfgang Denk
• [U-Boot] [PATCH 5/8] lcd: make 16bpp work   Wolfgang Denk
• [U-Boot] [PATCH 3/8] drivers/misc: add stmpe2401 port extender and keypad controller   Wolfgang Denk
• [U-Boot] [PATCH 6/8] nhk8815: added keypad   Wolfgang Denk
• [U-Boot] [PATCH 7/8] nhk8815: start lower in RAM, so the 800x480 frame buffer fits   Wolfgang Denk
• [U-Boot] [PATCH 8/8] nhk8815: added lcd support   Wolfgang Denk
• [U-Boot] [PATCH v2] sf: new driver for Winbond W25X16/32/64 devices   Wolfgang Denk
• [U-Boot] [PATCH] Reduce apollon OneNAND IPL code   Wolfgang Denk
• [U-Boot] [PATCH] sf: fix stmicro offset setup while erasing   Wolfgang Denk
• [U-Boot] [PATCH 1/3] NET: LAN91C96 CONFIG_NET_MULTIify   Wolfgang Denk
• [U-Boot] [PATCH 1/3] command.c: Break commands out to appropriate cmd_*.c files   Wolfgang Denk
• [U-Boot] [PATCH 2/3] cmd_help: General cleanup   Wolfgang Denk
• [U-Boot] [PATCH 3/3] Add 'true' and 'false' commands   Wolfgang Denk
• [U-Boot] mtest issue   Wolfgang Denk
• [U-Boot] [PATCH] memsize: get correct memory size   Wolfgang Denk
• [U-Boot] [RFC/PATCH 1/2]: Arm: Kirkwood: Split PHY-related initialization to a common file   Wolfgang Denk
• [U-Boot] PATCH mtd CFI flash: timeout calculation underflow if imprecise 1kHz timer: fix   Wolfgang Denk
• [U-Boot] Problem with SD card and ext2ls   Wolfgang Denk
• [U-Boot] [PATCH 1/5] Introducing AM3517EVM support   Wolfgang Denk
• [U-Boot] [PATCH 2/5] am3517_evm_config options added to Makfile   Wolfgang Denk
• [U-Boot] [PATCH 3/5] Added configuration file for AM3517EVM   Wolfgang Denk
• [U-Boot] [PATCH 4/5] AM3517EVM: Add mux configuration   Wolfgang Denk
• [U-Boot] [PATCH 5/5] AM3517: Add support for EMIF4   Wolfgang Denk
• [U-Boot] Problem with SDRAM on my board.   Wolfgang Denk
• [U-Boot] [PATCH v2] Fix build failure in examples/standalone   Wolfgang Denk
• [U-Boot] [PATCH 0/5] Introducing TI's New SoC/board AM3517EVM   Wolfgang Denk
• [U-Boot] [PATCH 00/10] i386 Relocation   Wolfgang Denk
• [U-Boot] [PATCH RFC] TFTP: allow for adjustable retransmission timout   Wolfgang Denk
• [U-Boot] [PATCH 3/5] xes: Enable the 'ecc' command   Wolfgang Denk
• [U-Boot] [PATCH v2 1/2] NET: Move MDIO regs out of TSEC Space   Wolfgang Denk
• [U-Boot] [PATCH] Building of FIT images does not work.   Wolfgang Denk
• [U-Boot] [PATCH] Fix mingw tools build   Wolfgang Denk
• [U-Boot] [PATCH] Add support for CS2 dataflash for Atmel-SPI.   Wolfgang Denk
• [U-Boot] [PATCH] Make the generic unaligned access code safe for unaligned access   Wolfgang Denk
• [U-Boot] [PATCH] Repair the 'netry=once' option.   Wolfgang Denk
• [U-Boot] [PATCH] Fix for Void function returning value in sbc35-a9g20   Wolfgang Denk
• [U-Boot] [u-boot] [PATCH] imx27: make 26MHz clock input value selectable from config files.   Wolfgang Denk
• [U-Boot] [patch v2] Repair build fail in case CONFIG_PPC=n and CONFIG_FIT=y   Wolfgang Denk
• [U-Boot] Problem with SDRAM on my board.   Wolfgang Denk
• [U-Boot] [PATCH] Make the generic unaligned access code safe for unaligned access   Wolfgang Denk
• [U-Boot] [PATCH] memsize: get correct memory size   Wolfgang Denk
• [U-Boot] Pull request - i2c [for next]   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx/next   Wolfgang Denk
• [U-Boot] ARM pull request   Wolfgang Denk
• [U-Boot] [PATCH] Generic udelay() with watchdog support   Wolfgang Denk
• [U-Boot] Pull request - net   Wolfgang Denk
• [U-Boot] [PATCH] POST: Remove duplicated post_hotkey_pressed() functions   Wolfgang Denk
• [U-Boot] [PATCH v2] mkconfig: deny messed up ARCH definition   Wolfgang Denk
• [U-Boot] [PATCH 1/1] bootm: mark local boot_os[] table static   Wolfgang Denk
• [U-Boot] [PATCH] spi_flash.h: pull in linux/types.h for u## types   Wolfgang Denk
• [U-Boot] [PATCH] ppc: Move conditional compilation of kgdb.c to Makefile   Wolfgang Denk
• [U-Boot] [PATCH] tools: ignore *.exe binaries   Wolfgang Denk
• [U-Boot] [PATCH] img2srec: use standard types   Wolfgang Denk
• [U-Boot] [PATCH] Fix example FIT image source files   Wolfgang Denk
• [U-Boot] [PATCH] memsize: get correct memory size   Wolfgang Denk
• [U-Boot] Ttftp problem while retrieving a file   Wolfgang Denk
• [U-Boot] about ## Unknown FLASH on Bank 0   Wolfgang Denk
• [U-Boot] about ## Unknown FLASH on Bank 0   Wolfgang Denk
• [U-Boot] Debugging U-boot after relocation   Wolfgang Denk
• [U-Boot] Weird problem with kernel/initrd loading   Wolfgang Denk
• [U-Boot] Weird problem with kernel/initrd loading   Wolfgang Denk
• [U-Boot] [PATCH] ppc: transform init_sequence into a function.   Wolfgang Denk
• [U-Boot] [PATCH] ppc: transform init_sequence into a function.   Wolfgang Denk
• [U-Boot] DM9000x driver entering infinite loop   Wolfgang Denk
• [U-Boot] [PATCH V2 2/9] video: add amba-clcd prime-cell   Wolfgang Denk
• [U-Boot] Having problem Booting linux from nand flash   Wolfgang Denk
• [U-Boot] [PATCH] ppc: transform init_sequence into a function.   Wolfgang Denk
• [U-Boot] [PATCH] Add inverted clock polarity support for Atmel LCD driver   Dimitar Dimitrov
• [U-Boot] U-Boot hangs when board is attached to BDI2000   Dunda, Matthias
• [U-Boot] Debugging U-boot after relocation   Dunda, Matthias
• [U-Boot] standalone apps and their use of exported functions   Valentin Ecker
• [U-Boot] standalone apps and their use of exported functions   Valentin Ecker
• [U-Boot] standalone apps and their use of exported functions   Valentin Ecker
• [U-Boot] How to download image to U-Boot   Grant Edwards
• [U-Boot] How to download image to U-Boot   Grant Edwards
• [U-Boot] Anyone out there with a working sa11xx board using uboot?   Kristoffer Ericson
• [U-Boot] [PATCH] RTC: Fix return code in MC13783 RTC driver.   Fabio Estevam
• [U-Boot] u-boot for freescale iMX27 Baord   Fabio Estevam
• [U-Boot] EHCI hub not powering on port   Florian Fainelli
• [U-Boot] EHCI hub not powering on port   Florian Fainelli
• [U-Boot] EHCI hub not powering on port   Florian Fainelli
• [U-Boot] [PATCH 02/10] USB add macros for debugging usb device setup.   Mike Frysinger
• [U-Boot] [PATCH 08/10] OMAP3 zoom2 Use usbtty if the debug board is not connected.   Mike Frysinger
• [U-Boot] [PATCH 09/10] OMAP3 USB Initialize twl4030 only if required   Mike Frysinger
• [U-Boot] [PATCH] mkconfig: deny messed up ARCH definition   Mike Frysinger
• [U-Boot] [PATCH 02/10] USB add macros for debugging usb device setup.   Mike Frysinger
• [U-Boot] [RFC 1/5] CAN interface library   Mike Frysinger
• [U-Boot] [RFC 2/5] CAN device test command   Mike Frysinger
• [U-Boot] [PATCH 08/10] OMAP3 zoom2 Use usbtty if the debug board is not connected.   Mike Frysinger
• [U-Boot] [RFC 1/5] CAN interface library   Mike Frysinger
• [U-Boot] [RFC 2/5] CAN device test command   Mike Frysinger
• [U-Boot] Net driver questions   Mike Frysinger
• [U-Boot] [PATCH] clarify eth driver halt/recv steps   Mike Frysinger
• [U-Boot] Net driver questions   Mike Frysinger
• [U-Boot] Net driver questions   Mike Frysinger
• [U-Boot] [PATCH 1/1] net: pull CONFIG checks out of source and into makefile   Mike Frysinger
• [U-Boot] [PATCH 1/1] lmb: only force on arches that use it   Mike Frysinger
• [U-Boot] [PATCH 1/1] cmd_nand: push CONFIG check to Makefile   Mike Frysinger
• [U-Boot] [PATCH 1/1] bootm: mark local boot_os[] table static   Mike Frysinger
• [U-Boot] [PATCH] spi_flash.h: pull in linux/types.h for u## types   Mike Frysinger
• [U-Boot] [PATCH 1/1] lmb: only force on arches that use it   Mike Frysinger
• [U-Boot] [PATCH] Adding support for Linuxstamp II 9260   Mike Frysinger
• [U-Boot] [PATCH] Adding support for Linuxstamp II 9260   Mike Frysinger
• [U-Boot] [PATCH] Improve read performance of gerenic mmc.   Mike Frysinger
• [U-Boot] [PATCH] Save environment data to mmc.   Mike Frysinger
• [U-Boot] v3 OMAP USB   Mike Frysinger
• [U-Boot] [RFC] env: Group environment variables   Mike Frysinger
• [U-Boot] [RFC] env: Group environment variables   Mike Frysinger
• [U-Boot] [PATCH] tools: ignore *.exe binaries   Mike Frysinger
• [U-Boot] [PATCH] img2srec: use standard types   Mike Frysinger
• [U-Boot] [PATCH] exports: rewrite jump table init   Mike Frysinger
• [U-Boot] [PATCH 1/4] config_defaults.h: new header for common u-boot config defaults   Mike Frysinger
• [U-Boot] [PATCH 2/4] gzip/zlib: make features optional   Mike Frysinger
• [U-Boot] [PATCH 3/4] sha1: add dedicated config option   Mike Frysinger
• [U-Boot] [PATCH 4/4] bootm: allow people to disable this command   Mike Frysinger
• [U-Boot] [PATCH] Save environment data to mmc.   Mike Frysinger
• [U-Boot] [PATCH v2 1/2]: common: Add a watchdog CLI command   Mike Frysinger
• [U-Boot] [PATCH] Fix build failure in examples/standalone   Mike Frysinger
• [U-Boot] [PATCH] smc91111_eeprom: fix compile warning   Mike Frysinger
• [U-Boot] Subject: [U-BOOT] [PATCH] In stmicro_erase() correctly calculate the high byte of the sector address.   Mike Frysinger
• [U-Boot] [PATCH 1/5] smc911x: return -1 when initialization fails   Mike Frysinger
• [U-Boot] [PATCH 2/5] smc911x: use dev->name in printfs   Mike Frysinger
• [U-Boot] [PATCH 3/5] smc911x: silence MAC mismatch warning   Mike Frysinger
• [U-Boot] [PATCH 5/5] smc911x: allow mac address to be kept after smc911x_halt   Mike Frysinger
• [U-Boot] [PATCH 5/5] smc911x: allow mac address to be kept after smc911x_halt   Mike Frysinger
• [U-Boot] [PATCH 2/5] smc911x: use dev->name in printfs   Mike Frysinger
• [U-Boot] [PATCH 2/5] smc911x: use dev->name in printfs   Mike Frysinger
• [U-Boot] [PATCH 2/5] smc911x: use dev->name in printfs   Mike Frysinger
• [U-Boot] [PATCH] smc91111_eeprom: drop CONFIG stub protection   Mike Frysinger
• [U-Boot] [PATCH 2/5] smc911x: use dev->name in printfs   Mike Frysinger
• [U-Boot] [PATCH] smc911x_eeprom: fix building after smc911x overhaul   Mike Frysinger
• [U-Boot] [PATCH v2] smc911x_eeprom: fix building after smc911x overhaul   Mike Frysinger
• [U-Boot] [PATCH] smc911x: make smc911x_initialize return correct value (Was: Re: [PATCH 1/5] smc911x: return -1 when initialization fails)   Mike Frysinger
• [U-Boot] [PATCH v2] makefiles: fixes for building build tools   Mike Frysinger
• [U-Boot] [PATCH v2] makefiles: fixes for building build tools   Mike Frysinger
• [U-Boot] [PATCH] flash.h: pull in common.h for types   Mike Frysinger
• [U-Boot] [PATCH] flash.h: pull in common.h for types   Mike Frysinger
• [U-Boot] [PATCH v2] crc32: Impl. linux optimized crc32()   Mike Frysinger
• [U-Boot] [PATCH v2] crc32: Impl. linux optimized crc32()   Mike Frysinger
• [U-Boot] [PATCH] crc32: Make crc32 build on non Linux too   Mike Frysinger
• [U-Boot] [PATCH] flash.h: pull in common.h for types   Mike Frysinger
• [U-Boot] [PATCH] flash.h: pull in common.h for types   Mike Frysinger
• [U-Boot] [PATCH] crc32: Make crc32 build on non Linux too   Mike Frysinger
• [U-Boot] [PATCH v2] Condense some lines in common/Makefile for readability.   Mike Frysinger
• [U-Boot] why is the compilation of cmd_pcmcia.c hardcoded?   Mike Frysinger
• [U-Boot] [PATCH v2] crc32: Impl. linux optimized crc32()   Mike Frysinger
• [U-Boot] [PATCH] Move the preprocessor test for building flash.c to the Makefile.   Mike Frysinger
• [U-Boot] [PATCH v3] crc32: Impl. linux optimized crc32()   Mike Frysinger
• [U-Boot] include/asm-blackfin/mmc.h???   Mike Frysinger
• [U-Boot] [PATCH v2] Fix build failure in examples/standalone   Mike Frysinger
• [U-Boot] [RFC 3/5] CAN device driver for the SJA1000   Matthias Fuchs
• [U-Boot] [RFC 3/5] CAN device driver for the SJA1000   Matthias Fuchs
• [U-Boot] Please pull u-boot-ppc4xx/next   Matthias Fuchs
• [U-Boot] [PATCH 1/3] ppc4xx: Consolidate pci_target_init() function   Matthias Fuchs
• [U-Boot] [PATCH 1/3 v2] ppc4xx: Consolidate pci_target_init() function   Matthias Fuchs
• [U-Boot] [PATCH] ppc4xx: Remove confusing comment   Matthias Fuchs
• [U-Boot] [PATCH] ppc4xx: Remove unused features from PMC440 board support   Matthias Fuchs
• [U-Boot] Build breaks on some OMAP3 configs   Gadiyar, Anand
• [U-Boot] [PATCH v2] fsl_pci_init_port end-point initialization is broken   Kumar Gala
• [U-Boot] Pull request - mpc85xx (for 200911 release)   Kumar Gala
• [U-Boot] [PATCH v2] ppc/85xx: Clean up mpc8536DS PCI setup code   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Fix inclusion of 83xx immap in 85xx builds   Kumar Gala
• [U-Boot] Pull request - mpc85xx (for 200911 release) (updated)   Kumar Gala
• [U-Boot] [PATCH] 86xx: Remove redundant code in initdram   Kumar Gala
• [U-Boot] [PATCH] fsl_pci_init_port end-point initialization is broken   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Fix inclusion of 83xx immap in 85xx builds   Kumar Gala
• [U-Boot] [PATCH v2] ppc/85xx: Fix inclusion of 83xx immap in 85xx builds   Kumar Gala
• [U-Boot] [PATCH 01/12] ppc/85xx: Clean up MPC8536 DS PCI setup code   Kumar Gala
• [U-Boot] [PATCH 02/12] ppc/85xx: Clean up MPC8544 DS PCI setup code   Kumar Gala
• [U-Boot] [PATCH 03/12] ppc/85xx: Clean up MPC8569 MDS PCI setup code   Kumar Gala
• [U-Boot] [PATCH 04/12] ppc/85xx: Clean up MPC8568 MDS PCI setup code   Kumar Gala
• [U-Boot] [PATCH 05/12] ppc/85xx: Clean up ATUM8548 PCI setup code   Kumar Gala
• [U-Boot] [PATCH 06/12] ppc/85xx: Clean up MPC8548 CDS PCI setup code   Kumar Gala
• [U-Boot] [PATCH 07/12] ppc/86xx: Clean up MPC8610 HPCD PCI setup code   Kumar Gala
• [U-Boot] [PATCH 08/12] ppc/85xx: Move to using fsl_setup_hose on MPC8572 DS   Kumar Gala
• [U-Boot] [PATCH 09/12] ppc/85xx: Move to using fsl_setup_hose on P1/P2 RDB   Kumar Gala
• [U-Boot] [PATCH 10/12] ppc/85xx: Move to using fsl_setup_hose on P2020 DS   Kumar Gala
• [U-Boot] [PATCH 11/12] ppc/85xx: Move to using fsl_setup_hose on TQM 85xx   Kumar Gala
• [U-Boot] [PATCH 12/12] ppc/8xxx: Remove is_fsl_pci_agent   Kumar Gala
• [U-Boot] [PATCH] 85xx: Remove unused CONFIG_ASSUME_AMD_FLASH from config files   Kumar Gala
• [U-Boot] [PATCH v2] ppc/85xx: Fix inclusion of 83xx immap in 85xx builds   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Add PIB/ATM support for MPC8569mds   Kumar Gala
• [U-Boot] [PATCH v1] fsl-ddr: Fix the chip-select interleaving issue   Kumar Gala
• [U-Boot] Pull request - mpc85xx (for v2009.11)   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Fix how we determine the number of CAM entries   Kumar Gala
• [U-Boot] Pull request - mpc85xx (for v2009.11)(updated)   Kumar Gala
• [U-Boot] [PATCH 1/4] ppc/85xx: Add tracking of TLB CAM usage   Kumar Gala
• [U-Boot] [PATCH 2/4] ppc/85xx: Make SPD DDR TLB setup code use dynamic entry allocation   Kumar Gala
• [U-Boot] [PATCH 3/4] ppc/85xx: Remove CONFIG_SYS_DDR_TLB_START   Kumar Gala
• [U-Boot] [PATCH 4/4] ppc/85xx: Make flash TLB entry determined at runtime on FSL boards   Kumar Gala
• [U-Boot] [PATCH] p4080: add readback to bootpage translation window   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Add tracking of TLB CAM usage   Kumar Gala
• [U-Boot] [PATCH] ppc: Added macro to test for specific SVR revision   Kumar Gala
• [U-Boot] [PATCH] mpc83xx: Add NAND boot support for MPC8315E-RDB boards   Kumar Gala
• [U-Boot] mtest issue   Alexey Goncharov
• [U-Boot] mtest issue   Alexey Goncharov
• [U-Boot] mtest issue   Alexey Goncharov
• [U-Boot] [PATCH] at91: Enable slow master clock on meesc board   Daniel Gorsulowski
• [U-Boot] [PATCH resend] at91: Enable slow master clock on meesc board   Daniel Gorsulowski
• [U-Boot] Enabling 2 FCC ports using CONFIG_NET_MULTI   Gurumurthy Gowdar
• [U-Boot] [RFC 0/5] CAN framework for U-Boot   Wolfgang Grandegger
• [U-Boot] [RFC 1/5] CAN interface library   Wolfgang Grandegger
• [U-Boot] [RFC 2/5] CAN device test command   Wolfgang Grandegger
• [U-Boot] [RFC 3/5] CAN device driver for the SJA1000   Wolfgang Grandegger
• [U-Boot] [RFC 4/5] CAN device driver for the Intel 82527   Wolfgang Grandegger
• [U-Boot] [RFC 5/5] CAN interface support for the TQM855L module   Wolfgang Grandegger
• [U-Boot] [RFC 1/5] CAN interface library   Wolfgang Grandegger
• [U-Boot] [RFC 2/5] CAN device test command   Wolfgang Grandegger
• [U-Boot] [RFC 1/5] CAN interface library   Wolfgang Grandegger
• [U-Boot] [RFC 3/5] CAN device driver for the SJA1000   Wolfgang Grandegger
• [U-Boot] [RFC 3/5] CAN device driver for the SJA1000   Wolfgang Grandegger
• [U-Boot] Please pull u-boot-ppc4xx/next   Wolfgang Grandegger
• [U-Boot] v3 OMAP USB   Gupta, Ajay Kumar
• [U-Boot] [PATCH 1/3] DA830: Add pinmux for USB0_DRVVBUS   Ajay Kumar Gupta
• [U-Boot] [PATCH 2/3] DA8xx: Add MUSB host support   Ajay Kumar Gupta
• [U-Boot] [PATCH 3/3] DA830: Add usb config   Ajay Kumar Gupta
• [U-Boot] [PATCH 3/3] DA830: Add usb config   Gupta, Ajay Kumar
• [U-Boot] [PATCH 1/3] DA830: Add pinmux for USB0_DRVVBUS   Gupta, Ajay Kumar
• [U-Boot] [PATCH 1/4 v2] DA830: Add pinmux for USB0_DRVVBUS   Ajay Kumar Gupta
• [U-Boot] [PATCH 2/4 v2] DA8xx: Add GPIO register definitions   Ajay Kumar Gupta
• [U-Boot] [PATCH 3/4 v2] DA8xx: Add MUSB host support   Ajay Kumar Gupta
• [U-Boot] [PATCH 4/4 v2] DA830: Add usb config   Ajay Kumar Gupta
• [U-Boot] [PATCH] omap3evm: Add board revision function   Ajay Kumar Gupta
• [U-Boot] [PATCH] omap3evm: Add board revision function   Gupta, Ajay Kumar
• [U-Boot] [PATCH 3/4 v2] DA8xx: Add MUSB host support   Gupta, Ajay Kumar
• [U-Boot] [PATCH v3] DA8xx: Add MUSB host support   Ajay Kumar Gupta
• [U-Boot] [PATCH v3] DA8xx: Add MUSB host support   Gupta, Ajay Kumar
• [U-Boot] [PATCH v3] DA8xx: Add MUSB host support   Gupta, Ajay Kumar
• [U-Boot] [PATCH 0/4 v4] DA8xx: USB support   Ajay Kumar Gupta
• [U-Boot] [PATCH 1/4 v4] DA830: Add pinmux for USB0_DRVVBUS   Ajay Kumar Gupta
• [U-Boot] [PATCH 2/4 v4] DA8xx: Add GPIO register definitions   Ajay Kumar Gupta
• [U-Boot] [PATCH 3/4 v4] DA8xx: Add MUSB host support   Ajay Kumar Gupta
• [U-Boot] [PATCH 4/4 v4] DA830: Add usb config   Ajay Kumar Gupta
• [U-Boot] [PATCH 3/4 v4] DA8xx: Add MUSB host support   Gupta, Ajay Kumar
• [U-Boot] [PATCH 0/4 v5] DA8xx: USB support   Ajay Kumar Gupta
• [U-Boot] [PATCH 1/4 v5] DA830: Add pinmux for USB0_DRVVBUS   Ajay Kumar Gupta
• [U-Boot] [PATCH 2/4 v5] DA8xx: Add GPIO register definitions   Ajay Kumar Gupta
• [U-Boot] [PATCH 3/4 v5] DA8xx: Add MUSB host support   Ajay Kumar Gupta
• [U-Boot] [PATCH 4/4 v5] DA830: Add usb config   Ajay Kumar Gupta
• [U-Boot] [PATCH 3/4 v5] DA8xx: Add MUSB host support   Gupta, Ajay Kumar
• [U-Boot] [PATCH 3/4 v5] DA8xx: Add MUSB host support   Gupta, Ajay Kumar
• [U-Boot] [PATCH] omap3evm: Add board revision function   Gupta, Ajay Kumar
• [U-Boot] [PATCH] omap3evm: Add board revision function   Ajay Kumar Gupta
• [U-Boot] [PATCH V2 3/3] lcd: remove '#if 0' 32-bit scroll, now memcpy does it   Anatolij Gustschin
• [U-Boot] [PATCH V2 2/9] video: add amba-clcd prime-cell   Anatolij Gustschin
• [U-Boot] [PATCH V2 6/9] lcd: make 16bpp work   Anatolij Gustschin
• [U-Boot] [PATCH V2 2/9] video: add amba-clcd prime-cell   Anatolij Gustschin
• [U-Boot] Net driver questions   Krzysztof Halasa
• [U-Boot] Net driver questions   Krzysztof Halasa
• [U-Boot] Net driver questions   Krzysztof Halasa
• [U-Boot] MPC8349E-MDS questions   David Hawkins
• [U-Boot] MPC8349E-MDS questions   David Hawkins
• [U-Boot] about nand_read_byte() interface   HeLei
• [U-Boot] jffs2 FS flash occupation   HeLei
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   HeLei
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   HeLei
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   HeLei
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   HeLei
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   HeLei
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   HeLei
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   HeLei
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   HeLei
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   HeLei
• [U-Boot] jffs2 FS flash occupation   HeLei
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   HeLei
• [U-Boot] [PATCH] OMAP3EVM: Added NAND support   Hiremath, Vaibhav
• [U-Boot] [PATCH] OMAP3EVM: Added NAND support   Hiremath, Vaibhav
• [U-Boot] [PATCH] OMAP3EVM: Added NAND support   Hiremath, Vaibhav
• [U-Boot] [PATCH 0/5] Introducing TI's New SoC/board AM3517EVM   Hiremath, Vaibhav
• [U-Boot] [PATCH 1/5] Introducing AM3517EVM support   Hiremath, Vaibhav
• [U-Boot] [PATCH 2/5] am3517_evm_config options added to Makfile   Hiremath, Vaibhav
• [U-Boot] [PATCH 3/5] Added configuration file for AM3517EVM   Hiremath, Vaibhav
• [U-Boot] [PATCH 4/5] AM3517EVM: Add mux configuration   Hiremath, Vaibhav
• [U-Boot] [PATCH 5/5] AM3517: Add support for EMIF4   Hiremath, Vaibhav
• [U-Boot] [PATCH 0/5] Introducing TI's New SoC/board AM3517EVM   Hiremath, Vaibhav
• [U-Boot] [PATCH 3/5] Added configuration file for AM3517EVM   Hiremath, Vaibhav
• [U-Boot] [PATCH 5/5] AM3517: Add support for EMIF4   Hiremath, Vaibhav
• [U-Boot] [PATCH] omap3_mmc: Encapsulate twl4030 under option CONFIG_TWL4030_POWER   Hiremath, Vaibhav
• [U-Boot] [PATCH V4] OMAP3EVM: Added NAND support   Hiremath, Vaibhav
• [U-Boot] [PATCH 1/4] ARM Add New Board GEC2410   Hui.Tang
• [U-Boot] [PATCH 2/4] ARM Add New Board GEC2410   Hui.Tang
• [U-Boot] [PATCH 3/4] ARM Add New Board GEC2410   Hui.Tang
• [U-Boot] [PATCH 4/4] ARM Add New Board GEC2410   Hui.Tang
• [U-Boot] [PATCH] Fix cs8900 dev->priv not init issue   Hui.Tang
• [U-Boot] [PATCH 1/1] ARM Add New Board GEC2410 v2   Hui.Tang
• [U-Boot] [PATCH 1/1] ARM Add New Board GEC2410 rev2   Hui.Tang
• [U-Boot] [PATCH 1/1 v2] ARM Add New Board GEC2410   Hui.Tang
• [U-Boot] [PATCH 1/1] S3C2410 NAND Flash Add Missing Function   Hui.Tang
• [U-Boot] [PATCH] OMAP3: pandora: fix booting without serial attached   Grazvydas Ignotas
• [U-Boot] [PATCH] OMAP3: pandora: fix booting without serial attached   Grazvydas Ignotas
• [U-Boot] [PATCH v2] OMAP3: pandora: fix booting without serial attached   Grazvydas Ignotas
• [U-Boot] twl4030_power_init cleanup proposal   Grazvydas Ignotas
• [U-Boot] twl4030_power_init cleanup proposal   Grazvydas Ignotas
• [U-Boot] [RFC PATCH] TWL4030: make LEDs selectable in twl4030_led_init()   Grazvydas Ignotas
• [U-Boot] Pull request: u-boot-sh   Nobuhiro Iwamatsu
• [U-Boot] AT91SAM9260 Ethernet Device   J.Hwan.Kim
• [U-Boot] [PATCH] usb: write command for RAW partition.   Mahavir Jain
• [U-Boot] [PATCH] usb: write command for RAW partition.   Mahavir Jain
• [U-Boot] [PATCH] usb: write command for RAW partition.   Mahavir Jain
• [U-Boot] Subject: [U-BOOT] [PATCH] In stmicro_erase() correctly calculate the high byte of the sector address.   Gary Jennejohn
• [U-Boot] Problem with SDRAM on my board.   Gutierrez Gomez Jesus-B16947
• [U-Boot] Joe Johnson has invited you as a colleauge to Work Kingdom   Joe.Johnson
• [U-Boot] Bill Johnson has invited you as a colleague to Work Kingdom   Bill Johnson
• [U-Boot] [PATCH v2 1/2]: common: Add a watchdog CLI command   Simon Kagstrom
• [U-Boot] Does ubifs in u-boot is only for ppc   Simon Kagstrom
• [U-Boot] [RFC/PATCH 1/2]: Arm: Kirkwood: Split PHY-related initialization to a common file   Simon Kagstrom
• [U-Boot] [PATCH] S3C6400/SMDK6400: fix stack_setup in start.S   Minkyu Kang
• [U-Boot] [PATCH-ARM 1/3] Add support for the s3c2440 cpu excluding nand driver   Minkyu Kang
• [U-Boot] [PATCH 04/10] ARM Add New Board GEC2410   Minkyu Kang
• [U-Boot] [PATCH ARM] Clean-up of s3c24x0 header files   Minkyu Kang
• [U-Boot] [PATCH ARM] Move s3c24x0 header files to asm-arm/arch-s3c24x0/   Minkyu Kang
• [U-Boot] [PATCH 1/4] ARM Add New Board GEC2410   Minkyu Kang
• [U-Boot] s3c64xx: move s3c64xx header files to include/asm-arm/arch-s3c64xx   Minkyu Kang
• [U-Boot] [PATCH] samsung: move DRAM parameters   Minkyu Kang
• [U-Boot] [PATCH] samsung: move DRAM parameters   Minkyu Kang
• [U-Boot] s3c64xx: move s3c64xx header files to include/asm-arm/arch-s3c64xx   Minkyu Kang
• [U-Boot] [PATCH ARM v2] Clean-up of s3c24x0 header files   Minkyu Kang
• [U-Boot] [PATCH 1/1] ARM Add New Board GEC2410 rev2   Minkyu Kang
• [U-Boot] [PATCH] S3C6400/SMDK6400: fix stack_setup in start.S   Minkyu Kang
• [U-Boot] s5pc1xx: serial: fix the error check logic   Minkyu Kang
• [U-Boot] [PATCH ARM] Add a unified s3c24x0 header file   Minkyu Kang
• [U-Boot] [PATCH] S3C6400/SMDK6400: fix stack_setup in start.S   Minkyu Kang
• [U-Boot] s5pc1xx: serial: fix the error check logic   Minkyu Kang
• [U-Boot] [PATCH ARM] Add a unified s3c24x0 header file   Minkyu Kang
• [U-Boot] [PATCH] S3C6400/SMDK6400: fix stack_setup in start.S   Minkyu Kang
• [U-Boot] [PATCH ARM] Add a unified s3c24x0 header file   Minkyu Kang
• [U-Boot] [PATCH] memsize: get correct memory size   Minkyu Kang
• [U-Boot] [PATCH 1/1 v2] ARM Add New Board GEC2410   Minkyu Kang
• [U-Boot] [PATCH ARM v2] Add a unified s3c24x0 header file   Minkyu Kang
• [U-Boot] Please pull u-boot-samsung/master   Minkyu Kang
• [U-Boot] [PATCH] memsize: get correct memory size   Minkyu Kang
• [U-Boot] [PATCH] memsize: get correct memory size   Minkyu Kang
• [U-Boot] [PATCH] memsize: get correct memory size   Minkyu Kang
• [U-Boot] SMDK2410 board   David Kaplan
• [U-Boot] multiple partitions in mtdparts   Dieter Kiermaier
• [U-Boot] Need some help with a UBI memory allocation issue   Hedwin Koning
• [U-Boot] [PATCH] add lzop decompression support   Peter Korsgaard
• [U-Boot] [PATCH] add lzop decompression support   Peter Korsgaard
• [U-Boot] [PATCH RFC] zlib: Optimize decompression   Peter Korsgaard
• [U-Boot] [PATCH RFC] zlib: Optimize decompression   Peter Korsgaard
• [U-Boot] [PATCH, REGRESSION] mpc83xx: provide option to set LCRR early   Peter Korsgaard
• [U-Boot] [PATCH] add lzop decompression support   Peter Korsgaard
• [U-Boot] [PATCH, REGRESSION] mpc83xx: provide option to set LCRR early   Peter Korsgaard
• [U-Boot] Unable to launch menuconfig   Ioannis Kyriakopoulos
• [U-Boot] Unable to launch menuconfig   Ioannis Kyriakopoulos
• [U-Boot] Weird problem with kernel/initrd loading   Ioannis Kyriakopoulos
• [U-Boot] Weird problem with kernel/initrd loading   Ioannis Kyriakopoulos
• [U-Boot] **NOTIFICATION**   SWISS LOTTO
• [U-Boot] [PATCH] Fixing `can't find crc32.c' error on non Linux platform   Arnaud Lacombe
• [U-Boot] [PATCH] Generic udelay() with watchdog support   Ingo van Lil
• [U-Boot] [PATCH] Generic udelay() with watchdog support   Ingo van Lil
• [U-Boot] [RFC 0/4] MXC: Add NAND support for i.MX31   Magnus Lilja
• [U-Boot] [RFC 1/4] MX31: Add struct definition for clock control module in i.MX31.   Magnus Lilja
• [U-Boot] [RFC 2/4] mxc_nand: Update driver to work with i.MX31.   Magnus Lilja
• [U-Boot] [RFC 3/4] MX31: Activate NAND support for i.MX31 Litekit board.   Magnus Lilja
• [U-Boot] [RFC 4/4] MXC: Reorganize 16 bit nand detection.   Magnus Lilja
• [U-Boot] [PATCH] cmd_date: Fix spelling in error message.   Magnus Lilja
• [U-Boot] [PATCH] RTC: Fix return code in MC13783 RTC driver.   Magnus Lilja
• [U-Boot] [RFC 4/4] MXC: Reorganize 16 bit nand detection.   Magnus Lilja
• [U-Boot] [PATCH] RTC: Fix return code in MC13783 RTC driver.   Magnus Lilja
• [U-Boot] [PATCH v2] cmd_date: Fix spelling in error message.   Magnus Lilja
• [U-Boot] [PATCH v2] RTC: Fix return code in MC13783 RTC driver.   Magnus Lilja
• [U-Boot] [PATCH] SPI: Fix 32 bit transfers in mxc_spi.c   Magnus Lilja
• [U-Boot] [PATCH v1 0/3] MXC: Add NAND support for i.MX31   Magnus Lilja
• [U-Boot] [PATCH v1 1/3] MX31: Add struct definition for clock control module in i.MX31.   Magnus Lilja
• [U-Boot] [PATCH v1 2/3] mxc_nand: Update driver to work with i.MX31.   Magnus Lilja
• [U-Boot] [PATCH v1 3/3] MX31: Activate NAND support for i.MX31 Litekit board.   Magnus Lilja
• [U-Boot] [PATCH v2 0/3] MXC: Add NAND support for i.MX31   Magnus Lilja
• [U-Boot] [PATCH v2 1/3] MX31: Add struct definition for clock control module in i.MX31.   Magnus Lilja
• [U-Boot] [PATCH v2 2/3] mxc_nand: Update driver to work with i.MX31.   Magnus Lilja
• [U-Boot] [PATCH v2 3/3] MX31: Activate NAND support for i.MX31 Litekit board.   Magnus Lilja
• [U-Boot] [PATCH] fsl-ddr: Fix the chip-select interleaving issue   Dave Liu
• [U-Boot] [PATCH v1] fsl-ddr: Fix the chip-select interleaving issue   Dave Liu
• [U-Boot] [PATCH] fsl-ddr: Fix power-down and ODT timing settings   Dave Liu
• [U-Boot] [PATCH 1/2] fsl-ddr: add the override for write leveling   Dave Liu
• [U-Boot] [PATCH 2/2] fsl-ddr: add override for the Rtt_WR   Dave Liu
• [U-Boot] [PATCH] Fix the local bus divider mapping   Dave Liu
• [U-Boot] jffs2 FS flash occupation   Xiangfu Liu
• [U-Boot] Att: Loan Offer At Low Interest Rate:   Alliance & Leceister Loan
• [U-Boot] Loam Program   ©Nationwide Loan
• [U-Boot] Loam Program   ©Nationwide Loan
• [U-Boot] [PATCH] Improve read performance of gerenic mmc.   Terry Lv
• [U-Boot] [PATCH] Improve read performance of generic mmc.   Terry Lv
• [U-Boot] [PATCH] Save environment data to mmc.   Terry Lv
• [U-Boot] [PATCH] Save environment data to mmc.   Terry Lv
• [U-Boot] [PATCH] Save environment data to mmc.   Terry Lv
• [U-Boot] [PATCH] Save environment data to mmc.   Terry Lv
• [U-Boot] [PATCH] Improve read performance of generic mmc.   Terry Lv
• [U-Boot] From:Maher Labib Abou Steit, General Manager, United Bank of Egypt   Steit Maher
• [U-Boot] GOOD NEWS   Senate's Official Mail.
• [U-Boot] [u-boot] [PATCH][1/2] mx27: Add necessary defines and helper functions to support I2C in i.MX27.   javier Martin
• [U-Boot] [u-boot] [PATCH] [1/2] [v1.2] mxc_fec: fix some erroneous PHY accesses.   javier Martin
• [U-Boot] [u-boot] [PATCH] imx27: make 26MHz clock input value selectable from config files.   javier Martin
• [U-Boot] Problem with SD card and ext2ls   javier Martin
• [U-Boot] Problem with SD card and ext2ls   javier Martin
• [U-Boot] Problem with SD card and ext2ls   javier Martin
• [U-Boot] Problem with SD card and ext2ls   javier Martin
• [U-Boot] [u-boot] [PATCH] imx27: make 26MHz clock input value selectable from config files.   javier Martin
• [U-Boot] MPC8349E-MDS questions   Mit Matelske
• [U-Boot] MPC8349E-MDS questions   Mit Matelske
• [U-Boot] (no subject)   Helen Mathew
• [U-Boot] [PATCH]: Nios2/Nios: Remove unneeded linker scripts   Scott McNutt
• [PATCH] Nios2: Fix compiler warnings in lib_nios2/board.c (unused variables)   Scott McNutt
• [U-Boot] [PATCH]: Nios2: Fix compiler warnings in lib_nios2/board.c   Scott McNutt
• [U-Boot] PATCH Nios2 kernel bootstrap error due to missing processor data cache flush: fix   Scott McNutt
• [U-Boot] Pull request - Nios   Scott McNutt
• [U-Boot] [PATCH] mkconfig: deny messed up ARCH definition   Menon, Nishanth
• [U-Boot] [PATCH v2] mkconfig: deny messed up ARCH definition   Nishanth Menon
• [U-Boot] [PATCH 0/3] enable CONFIG_NET_MULTI for LAN91C96   Menon, Nishanth
• [U-Boot] [PATCH 2/2] OMAP3:SDRC: introduce DDR types   Menon, Nishanth
• [U-Boot] [PATCH] omap3: allow slection of NAND GPMC settings based on board config   Nishanth Menon
• [U-Boot] TFTP on beagle board   Nishanth Menon
• [U-Boot] [PATCH] OMAP3EVM: Added NAND support   Nishanth Menon
• [U-Boot] [PATCH] BeagleBoard: Add a comment explaining the use of "OMAP34XX" macros.   Nishanth Menon
• [U-Boot] [PATCH 1/3] NET: LAN91C96 CONFIG_NET_MULTIify   Menon, Nishanth
• [U-Boot] Error while compiling U-Boot for beagleboard   Chetan Nanda
• [U-Boot] Error while compiling U-Boot for beagleboard   Chetan Nanda
• [U-Boot] about ## Unknown FLASH on Bank 0   Peter Pan
• [U-Boot] about ## Unknown FLASH on Bank 0   Peter Pan
• [U-Boot] I can not read Linux image from my nand flash   Peter Pan
• [U-Boot] Having problem Booting linux from nand flash   Peter Pan
• [U-Boot] Having problem Booting linux from nand flash   Peter Pan
• [U-Boot] [PATCH 1/3] [OneNAND] Flex-OneNAND driver support   Kyungmin Park
• [U-Boot] [PATCH] NAND: Update to support 64 bit device size   Paulraj, Sandeep
• [U-Boot] Quick sanity test after my NAND patches   Paulraj, Sandeep
• [U-Boot] Quick sanity test after my NAND patches   Paulraj, Sandeep
• [U-Boot] Quick sanity test after my NAND patches   Paulraj, Sandeep
• [U-Boot] [PATCH] NAND: Allow drivers to choose ECC block size   Paulraj, Sandeep
• [U-Boot] Quick sanity test after my NAND patches   Paulraj, Sandeep
• [U-Boot] [PATCH 1/2] OMAP3:SDRC: Cleanup references to SDP   Paulraj, Sandeep
• [U-Boot] [PATCH 2/2] OMAP3:SDRC: introduce DDR types   Paulraj, Sandeep
• [U-Boot] [PATCH 2/2] OMAP3:SDRC: introduce DDR types   Paulraj, Sandeep
• [U-Boot] [PATCH] NAND: fix "raw" reads with ECC syndrome layouts   Paulraj, Sandeep
• [U-Boot] [PATCH] NAND: fix "raw" reads with ECC syndrome layouts   Paulraj, Sandeep
• [U-Boot] [PATCH] omap3: add CM-T35 board   Paulraj, Sandeep
• [U-Boot] [PATCH] omap3: fix bi_dram initialization when CONFIG_NR_DRAM_BANKS is 1   Paulraj, Sandeep
• [U-Boot] [PATCH V5 0/4] add TI DA8xx support:   Paulraj, Sandeep
• [U-Boot] [PATCH 1/3] DA830: Add pinmux for USB0_DRVVBUS   Paulraj, Sandeep
• [U-Boot] [PATCH 1/3] DA830: Add pinmux for USB0_DRVVBUS   Paulraj, Sandeep
• [U-Boot] [PATCH v3] davinci timer.c: Remove volatiles and memory mapped structures   Paulraj, Sandeep
• [U-Boot] [PATCH V4] Davinci: add a pin multiplexer configuration API   Paulraj, Sandeep
• [U-Boot] [PATCH V5 1/4] add TI DA8xx support: DA8xx includes   Paulraj, Sandeep
• [U-Boot] [PATCH V5 2/4] add TI DA8xx support: Add DA8xx cpu functions   Paulraj, Sandeep
• [U-Boot] [PATCH V5 3/4] add TI DA8xx support: Add new directory for da830evm board   Paulraj, Sandeep
• [U-Boot] [PATCH V5 4/4] add TI DA8xx support: Integrate DA830 EVM support into U-Boot   Paulraj, Sandeep
• [U-Boot] [PATCH 2/3] DA8xx: Add MUSB host support   Paulraj, Sandeep
• [U-Boot] [PATCH 2/2] OMAP3:SDRC: introduce DDR types   Paulraj, Sandeep
• [U-Boot] [PATCH 3/4 v2] DA8xx: Add MUSB host support   Paulraj, Sandeep
• [U-Boot] [PATCHi v3] OMAP3: add CM-T35 board   Paulraj, Sandeep
• [U-Boot] [PATCH v4] OMAP3: add CM-T35 board   Paulraj, Sandeep
• [U-Boot] [PATCH] TI: DaVinci: Updating EMAC driver for DM365 and DM646x   Paulraj, Sandeep
• [U-Boot] [PATCH] Davinci: Configurable NAND chip selects   Paulraj, Sandeep
• [U-Boot] [PATCH V5 1/4] add TI DA8xx support: DA8xx includes   Paulraj, Sandeep
• [U-Boot] [PATCH 3/4 v2] DA8xx: Add MUSB host support   Paulraj, Sandeep
• [U-Boot] [PATCH] Davinci: Configurable NAND chip selects   Paulraj, Sandeep
• [U-Boot] [PATCH 0/5] Introducing TI's New SoC/board AM3517EVM   Paulraj, Sandeep
• [U-Boot] [PATCH v2] Fix build failure in examples/standalone   Paulraj, Sandeep
• [U-Boot] Please pull u-boot-ti/master   Paulraj, Sandeep
• [U-Boot] Please pull u-boot-ti/master   Paulraj, Sandeep
• [U-Boot] redundant code in common/cmd_i2c.   PratapChandu
• [U-Boot] Build breaks on some OMAP3 configs   Premi, Sanjeev
• [U-Boot] [PATCH] Fix build failure in examples/standalone   Sanjeev Premi
• [U-Boot] [PATCH] Fix build failure in examples/standalone   Premi, Sanjeev
• [U-Boot] [PATCH] Fix build failure in examples/standalone   Premi, Sanjeev
• [U-Boot] [PATCH] Fix build failure in examples/standalone   Premi, Sanjeev
• [U-Boot] [PATCH v2] Fix build failure in examples/standalone   Sanjeev Premi
• [U-Boot] [PATCH v2] Fix build failure in examples/standalone   Premi, Sanjeev
• [U-Boot] omap3: Is lowlevel_init() ever called?   Premi, Sanjeev
• [U-Boot] Notification Winning   Promotion
• [U-Boot] Value of .bootpg and TEXT_BASE for ppc440 in U-Boot   Mihir Punjabi
• [PATCH] smc911x: make smc911x_initialize return correct value   Mike Rapoport
• [U-Boot] [PATCH 0/5] smc911x driver fixes and additions   Mike Rapoport
• [U-Boot] [PATCH 1/5] smc911x: return -1 when initialization fails   Mike Rapoport
• [U-Boot] [PATCH 2/5] smc911x: use dev->name in printfs   Mike Rapoport
• [U-Boot] [PATCH 3/5] smc911x: silence MAC mismatch warning   Mike Rapoport
• [U-Boot] [PATCH 4/5] smc911x: update SMC911X related configuration description   Mike Rapoport
• [U-Boot] [PATCH 5/5] smc911x: allow mac address to be kept after smc911x_halt   Mike Rapoport
• [U-Boot] [PATCH] smc911x: fix typo in smc911x_handle_mac_address name   Mike Rapoport
• [U-Boot] [PATCH] omap3: fix bi_dram initialization when CONFIG_NR_DRAM_BANKS is 1   Mike Rapoport
• [U-Boot] [PATCH] omap3: allow slection of NAND GPMC settings based on board config   Mike Rapoport
• [U-Boot] [PATCH] omap3: add CM-T35 board   Mike Rapoport
• [U-Boot] [PATCH] omap3: add CM-T35 board   Mike Rapoport
• [U-Boot] [PATCH] omap3: add CM-T35 board   Mike Rapoport
• [U-Boot] [PATCH] omap3: add CM-T35 board   Mike Rapoport
• [U-Boot] [PATCH v2] OMAP3: add CM-T35 board   Mike Rapoport
• [U-Boot] [PATCH 5/5] smc911x: allow mac address to be kept after smc911x_halt   Mike Rapoport
• [U-Boot] [PATCH 3/5] smc911x: silence MAC mismatch warning   Mike Rapoport
• [U-Boot] [PATCH v2] OMAP3: add CM-T35 board   Mike Rapoport
• [U-Boot] [PATCH 2/5] smc911x: use dev->name in printfs   Mike Rapoport
• [U-Boot] [PATCH v2] OMAP3: add CM-T35 board   Mike Rapoport
• [U-Boot] [PATCH 2/5] smc911x: use dev->name in printfs   Mike Rapoport
• [U-Boot] [PATCH 2/5] smc911x: use dev->name in printfs   Mike Rapoport
• [U-Boot] [PATCH v2] OMAP3: add CM-T35 board   Mike Rapoport
• [U-Boot] [PATCH] smc911x: make smc911x_initialize return correct value (Was: Re: [PATCH 1/5] smc911x: return -1 when initialization fails)   Mike Rapoport
• [U-Boot] [PATCH] smc911x: fix typo in smc911x_handle_mac_address name   Mike Rapoport
• [U-Boot] [PATCHi v3] OMAP3: add CM-T35 board   Mike Rapoport
• [U-Boot] [PATCH] omap3: allow slection of NAND GPMC settings based on board config   Mike Rapoport
• [U-Boot] [PATCH v4] OMAP3: add CM-T35 board   Mike Rapoport
• [U-Boot] [PATCHi v3] OMAP3: add CM-T35 board   Mike Rapoport
• [U-Boot] [PATCH] omap3: allow slection of NAND GPMC settings based on board config   Mike Rapoport
• [U-Boot] [PATCH v4] OMAP3: add CM-T35 board   Mike Rapoport
• [U-Boot] [PATCHi v5] OMAP3: add CM-T35 board   Mike Rapoport
• [U-Boot] [PATCH v4] OMAP3: add CM-T35 board   Mike Rapoport
• [U-Boot] [PATCH v4] OMAP3: add CM-T35 board   Mike Rapoport
• [U-Boot] [PATCH v6] OMAP3: add CM-T35 board   Mike Rapoport
• [U-Boot] [PATCH] OMAP3 Remove unneeded boot_flash_* declarations   Mike Rapoport
• [U-Boot] omap3 and get_board_rev   Mike Rapoport
• [U-Boot] [PATCH v6] OMAP3: add CM-T35 board   Mike Rapoport
• [U-Boot] [PATCH] examples/api/Makefile: add lib_arm/eabi_compat   Mike Rapoport
• [U-Boot] [PATCH v6] OMAP3: add CM-T35 board   Mike Rapoport
• [U-Boot] Servizi finanziari offerti da Gruppo Retefin   Informativa offerta da Gruppo Retefin
• [U-Boot] Better I2C support for OMAP   Tom Rix
• [U-Boot] [PATCH] Add I2C multibus support for OMAP2/3 boards   Tom Rix
• [U-Boot] ARM LED weak symbols   Tom Rix
• [U-Boot] [PATCH 1/2] ARM Conditionally compile board LED functions   Tom Rix
• [U-Boot] [PATCH 2/2] ARM: fix build error with gcc-4.4.2 about inline function declared weak   Tom Rix
• [U-Boot] Omap USB missing patch #10   Tom Rix
• [U-Boot] [PATCH 10/10] omap3evm: musb: add USB config   Tom Rix
• [U-Boot] AT91 runnable out of RAM ?   Tom Rix
• [U-Boot] AT91 runnable out of RAM ?   Tom Rix
• [U-Boot] OMAP3 move declaration of gpmc_cfg   Tom Rix
• [U-Boot] [PATCH] OMAP3 Move declaration of gpmc_cfg.   Tom Rix
• [U-Boot] OMAP3 Remove unneeded decls   Tom Rix
• [U-Boot] [PATCH] OMAP3 Remove unneeded boot_flash_* declarations   Tom Rix
• [U-Boot] [PATCH] ppc4xx: 44x_spd_ddr2.c: Fix register macro ECCCR -> ECCES (SDRAM_ECCES)   Stefan Roese
• [U-Boot] [PATCH 0/6] ppc4xx: Linker script consolidation   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Consolidate 4xx PCIe board specific configuration   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Remove duplicated is_pci_host() functions   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Fix NAND booting targets after 4xx linker script consolidation   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Canyonlands: Change EBC bus config to drive always (no high-z)   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: 44x_spd_ddr2.c: Fix register macro ECCCR -> ECCES (SDRAM_ECCES)   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/master   Stefan Roese
• [U-Boot] [PATCH 1/2] ppc4xx: Switch to I2C bus numer 0 for chip_config command   Stefan Roese
• [U-Boot] [PATCH 2/2] ppc4xx: Katmai: Add chip_config command   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Add UBI support to PLU405 boards   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Fix NAND booting targets after 4xx linker script consolidation   Stefan Roese
• [U-Boot] [PATCH 1/2] ppc4xx: Switch to I2C bus numer 0 for chip_config command   Stefan Roese
• [U-Boot] [PATCH 2/2] ppc4xx: Katmai: Add chip_config command   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/next   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/next   Stefan Roese
• [U-Boot] [PATCH 1/3] ppc4xx: Consolidate pci_target_init() function   Stefan Roese
• [U-Boot] [PATCH 2/3] ppc4xx: Consolidate pci_pre_init() function   Stefan Roese
• [U-Boot] [PATCH 3/3] ppc4xx: Consolidate pci_master_init() function   Stefan Roese
• [U-Boot] [PATCH 1/3] ppc4xx: Consolidate pci_target_init() function   Stefan Roese
• [U-Boot] [PATCH 1/3 v2] ppc4xx: Consolidate pci_target_init() function   Stefan Roese
• [U-Boot] [PATCH 1/2] Add minimal SJA1000 header for basic CAN mode   Stefan Roese
• [U-Boot] [PATCH 2/2 V3] ppc4xx: Initialize magnetic couplers in PLU405   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Initialize magnetic coupler on VOM405 boards   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/master   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: alpr: Remove some not needed commands to make image fit again   Stefan Roese
• [U-Boot] [PATCH] fix flash_sect_erase() to display correct message   Stefan Roese
• [U-Boot] Please pull u-boot-cfi-flash/master   Stefan Roese
• [U-Boot] [PATCH] fix flash_sect_erase() to display correct message   Stefan Roese
• [U-Boot] [PATCH V2 3/3] Add support for the LaCie ED Mini V2 board   Stefan Roese
• [U-Boot] help on a compiler error in include/asm/system.h   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: alpr: Remove some not needed commands to make image fit again   Stefan Roese
• [U-Boot] [PATCH 1/3 v2] ppc4xx: Consolidate pci_target_init() function   Stefan Roese
• [U-Boot] [PATCH 2/3] ppc4xx: Consolidate pci_pre_init() function   Stefan Roese
• [U-Boot] [PATCH 3/3] ppc4xx: Consolidate pci_master_init() function   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Remove confusing comment   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Remove unused features from PMC440 board support   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/next   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Remove some testing code from 4xx_pcie.c   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Cleanup PPC4xx I2C infrastructure   Stefan Roese
• [U-Boot] [PATCH V2 3/3] Add support for the LaCie ED Mini V2 board   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Remove some testing code from 4xx_pcie.c   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Cleanup PPC4xx I2C infrastructure   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/next   Stefan Roese
• [U-Boot] [PATCH] Make the generic unaligned access code safe for unaligned access   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/next   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/next   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Remove autoupdate feature from PLU405 board   Stefan Roese
• [U-Boot] [PATCH] POST: Remove duplicated post_hotkey_pressed() functions   Stefan Roese
• [U-Boot] [PATCH (repost)] Nomadik: fix reset_timer()   Alessandro Rubini
• [U-Boot] [PATCH (repost)] Nomadik: fix reset_timer()   Alessandro Rubini
• [U-Boot] [PATCH (repost)] Nomadik: fix reset_timer()   Alessandro Rubini
• [U-Boot] [PATCH V2] Nomadik: fix reset_timer()   Alessandro Rubini
• [U-Boot] [PATCH V3] Nomadik: fix reset_timer()   Alessandro Rubini
• [U-Boot] [PATCH 1/2] ARM Conditionally compile board LED functions   Alessandro Rubini
• [U-Boot] [PATCH 6/8] nhk8815: added keypad   Alessandro Rubini
• [U-Boot] [PATCH 8/8] nhk8815: added lcd support   Alessandro Rubini
• [U-Boot] [PATCH V2 0/9] display and keypad support for nhk8815   Alessandro Rubini
• [U-Boot] [PATCH V2 1/9] nhk8815: change the order of initialization   Alessandro Rubini
• [U-Boot] [PATCH V2 2/9] video: add amba-clcd prime-cell   Alessandro Rubini
• [U-Boot] [PATCH V2 3/9] include/nomadik.h: add physical address for cldc   Alessandro Rubini
• [U-Boot] [PATCH V2 4/9] drivers/misc: add stmpe2401 port extender and keypad controller   Alessandro Rubini
• [U-Boot] [PATCH V2 5/9] nhk8815.h: define we need stmpe   Alessandro Rubini
• [U-Boot] [PATCH V2 6/9] lcd: make 16bpp work   Alessandro Rubini
• [U-Boot] [PATCH V2 7/9] nhk8815: added keypad   Alessandro Rubini
• [U-Boot] [PATCH V2 8/9] nhk8815: start lower in RAM, so the 800x480 frame buffer fits   Alessandro Rubini
• [U-Boot] [PATCH V2 9/9] nhk8815: added lcd support   Alessandro Rubini
• [U-Boot] [PATCH V4] Nomadik: fix reset_timer()   Alessandro Rubini
• [U-Boot] An error in u-boot-2009.08/cpu/arm920t/start.S   Alessandro Rubini
• [U-Boot] [PATCH V2] arm/board.c: avoid ifdef using weak default functions   Alessandro Rubini
• [U-Boot] [PATCH V2 2/9] video: add amba-clcd prime-cell   Alessandro Rubini
• [U-Boot] [PATCH] ppc: transform init_sequence into a function.   Alessandro Rubini
• [U-Boot] [PATCH V2 2/9] video: add amba-clcd prime-cell   Alessandro Rubini
• [U-Boot] [PATCH V2 2/9] video: add amba-clcd prime-cell   Alessandro Rubini
• [U-Boot] [PATCH] BeagleBoard: Add a comment explaining the use of "OMAP34XX" macros.   Måns Rullgård
• [U-Boot] [PATCH] BeagleBoard: Add a comment explaining the use of "OMAP34XX" macros.   Måns Rullgård
• [U-Boot] [PATCH v2 00/10] i386 Relocation   Graeme Russ
• [U-Boot] [PATCH v2 01/10] Fix dlmalloc compile warning   Graeme Russ
• [U-Boot] [PATCH v2 02/10] Fix i386 malloc initialisation   Graeme Russ
• [U-Boot] [PATCH v2 03/10] Fix link collisions resulting from gcc4.4.1 upgrade   Graeme Russ
• [U-Boot] [PATCH v2 04/10] Reorder source objects in lib_i386 Makefile   Graeme Russ
• [U-Boot] [PATCH v2 05/10] Fix global label in inline asm compile error   Graeme Russ
• [U-Boot] [PATCH v2 06/10] Fix race condition when using SC520 timers   Graeme Russ
• [U-Boot] [PATCH v2 07/10] Rearrange i386 Interupt Handling   Graeme Russ
• [U-Boot] [PATCH v2 08/10] Remove inline asm symbols from .dynsym   Graeme Russ
• [U-Boot] [PATCH v2 09/10] Move references to link script exports   Graeme Russ
• [U-Boot] [PATCH v2 10/10] Final i386 Relocation   Graeme Russ
• [U-Boot] KAMIO board   Frédéric SOSSON
• [U-Boot] [PATCH 0/3] [OneNAND] Flex-OneNAND driver support   Amul Kumar Saha
• [U-Boot] [PATCH 1/3] [OneNAND] Flex-OneNAND driver support   Amul Kumar Saha
• [U-Boot] [PATCH 1/3] [OneNAND] Flex-OneNAND driver support   Amul Kumar Saha
• [U-Boot] [PATCH 2/3] [OneNAND] ENV Variable support for Flex-OneNAND   Amul Kumar Saha
• [U-Boot] [PATCH 3/3] [OneNAND] Flex-OneNAND boundary settings   Amul Kumar Saha
• [U-Boot] [PATCH 1/3] [OneNAND] Flex-OneNAND driver support   Amul Kumar Saha
• [U-Boot] [PATCH 3/3] [OneNAND] Flex-OneNAND boundary settings   Amul Kumar Saha
• [U-Boot] [PATCH 1/3] [OneNAND] Flex-OneNAND driver support   Amul Kumar Saha
• [U-Boot] [PATCH 3/3] [OneNAND] Flex-OneNAND boundary settings   Amul Kumar Saha
• [U-Boot] [PATCH 3/3] [OneNAND] Flex-OneNAND boundary settings   Amul Kumar Saha
• [U-Boot] [PATCH 3/3] [OneNAND] Flex-OneNAND boundary settings   Amul Kumar Saha
• [U-Boot] [PATCH 3/3] [OneNAND] Flex-OneNAND boundary settings   Amul Kumar Saha
• [U-Boot] [PATCH 2/2] OMAP3:SDRC: introduce DDR types   Steve Sakoman
• [U-Boot] [PATCH 2/2] OMAP3:SDRC: introduce DDR types   Steve Sakoman
• [U-Boot] [U-boot][PATCH] AMCC ppc440SPe PCIe PLL lock error   Rupjyoti Sarmah
• [U-Boot] AT91 Rework   Jens Scharsig
• [U-Boot] AT91 Rework   Jens Scharsig
• [U-Boot] AT91 Rework   Jens Scharsig
• [U-Boot] AT91 Rework   Jens Scharsig
• [U-Boot] Can't see NFS packages with wireshark   Michael Schmid
• [U-Boot] [RFC] env: Group environment variables   John Schmoller
• [U-Boot] [RFC] env: Group environment variables   John Schmoller
• [U-Boot] [RFC] env: Group environment variables   John Schmoller
• [U-Boot] [RFC] env: Group environment variables   John Schmoller
• [U-Boot] [RFC] env: Group environment variables   John Schmoller
• [U-Boot] [u-boot] [PATCH][1/2] mx27: Add necessary defines and helper functions to support I2C in i.MX27.   Heiko Schocher
• [U-Boot] Please pull u-boot-i2c.git next   Heiko Schocher
• [U-Boot] [PATCH] Add I2C multibus support for OMAP2/3 boards   Heiko Schocher
• [U-Boot] [u-boot] [PATCH][1/2] mx27: Add necessary defines and helper functions to support I2C in i.MX27.   Heiko Schocher
• [U-Boot] [PATCH] Add I2C multibus support for OMAP2/3 boards   Heiko Schocher
• [U-Boot] [PATCH] Add I2C multibus support for OMAP2/3 boards   Heiko Schocher
• [U-Boot] redundant code in common/cmd_i2c.   Heiko Schocher
• [U-Boot] redundant code in common/cmd_i2c.   Heiko Schocher
• [U-Boot] Pull request - i2c [for next]   Heiko Schocher
• [U-Boot] [PATCH] at91: Extended soft_i2c driver for AT91SAM9263 SoC   Heiko Schocher
• [U-Boot] [PATCH] at91: Extended soft_i2c driver for AT91SAM9263 SoC   Heiko Schocher
• [U-Boot] Pull request - i2c [for next]   Heiko Schocher
• [U-Boot] u-boot for freescale iMX27 Baord   Robert Schwebel
• [U-Boot] MD Lists   Rachel Shepard
• [U-Boot] Problem with SDRAM on my board.   Lasse Skov
• [U-Boot] [PATCH] Fix example FIT image source files   Ira W. Snyder
• [U-Boot] U-Boot FIT images with ramdisk   Ira W. Snyder
• [U-Boot] [PATCH 3/7] 83xx/85xx/86xx: Add ECC support   Ira W. Snyder
• [U-Boot] [PATCH 3/7] 83xx/85xx/86xx: Add ECC support   Ira W. Snyder
• [U-Boot] [PATCH 3/7] 83xx/85xx/86xx: Add ECC support   Ira W. Snyder
• [U-Boot] [PATCH] use "boot selecr" jumper on NGW100 to select USART   Thomas Sprinkmeier
• [U-Boot] use "boot select" jumper on NGW100 to select USART   Thomas Sprinkmeier
• [U-Boot] use "boot select" jumper on NGW100 to select USART   Thomas Sprinkmeier
• [U-Boot] [PATCH] fsl_pci_init_port end-point initialization is broken   Ed Swarthout
• [U-Boot] [PATCH] fix nfs symlink name corruption   Ed Swarthout
• [U-Boot] [PATCH 04/10] ARM Add New Board GEC2410   Hui Tang
• [U-Boot] [PATCH 04/10] ARM Add New Board GEC2410   Hui Tang
• [U-Boot] [PATCH 08/10] ARM Add New Board GEC2410   Hui Tang
• [U-Boot] [PATCH 1/4] ARM Add New Board GEC2410   Hui Tang
• [U-Boot] [PATCH] Improve read performance of gerenic mmc.   Lv Terry-R65388
• [U-Boot] [PATCH] Save environment data to mmc.   Lv Terry-R65388
• [U-Boot] [PATCH] Save environment data to mmc.   Lv Terry-R65388
• [U-Boot] [PATCH] Save environment data to mmc.   Lv Terry-R65388
• [U-Boot] Build error found when using CONFIG_CMD_UBIFS   Lv Terry-R65388
• [U-Boot] Does ubifs in u-boot is only for ppc   Lv Terry-R65388
• [U-Boot] help on a compiler error in include/asm/system.h   Lv Terry-R65388
• [U-Boot] A question about driver/mmc/mmc.c   Lv Terry-R65388
• [U-Boot] [PATCH] Adding support for Linuxstamp II 9260   Paul Thomas
• [U-Boot] [PATCH] Adding support for Linuxstamp II 9260   Paul Thomas
• [U-Boot] [PATCH] Adding support for Linuxstamp II 9260   Paul Thomas
• [U-Boot] [PATCH] v2 Linuxstamp II 9260 support   Paul Thomas
• [U-Boot] u-boot for iMX27 board   Paul Thomas
• [U-Boot] [PATCH] v2 Linuxstamp II 9260 support   Paul Thomas
• [U-Boot] [PATCH] v2 Linuxstamp II 9260 support   Paul Thomas
• [U-Boot] [PATCH V2] Davinci: add a pin multiplexer configuration API   Nick Thompson
• [U-Boot] [PATCH V3] Davinci: add a pin multiplexer configuration API   Nick Thompson
• [U-Boot] [PATCH V4 0/4] add TI DA8xx support:   Nick Thompson
• [U-Boot] [PATCH V4 1/4] add TI DA8xx support: DA8xx includes   Nick Thompson
• [U-Boot] [PATCH V4 2/4] add TI DA8xx support: Add DA8xx cpu functions   Nick Thompson
• [U-Boot] [PATCH V4 3/4] add TI DA8xx support: Add new directory for da830evm board   Nick Thompson
• [U-Boot] [PATCH V4 4/4] add TI DA8xx support: Integrate DA830 EVM support into U-Boot   Nick Thompson
• [U-Boot] da8xx   Nick Thompson
• [U-Boot] [PATCH] Fix build failure in examples/standalone   Nick Thompson
• [U-Boot] [PATCH V5 0/4] add TI DA8xx support:   Nick Thompson
• [U-Boot] [PATCH V5 1/4] add TI DA8xx support: DA8xx includes   Nick Thompson
• [U-Boot] [PATCH V5 2/4] add TI DA8xx support: Add DA8xx cpu functions   Nick Thompson
• [U-Boot] [PATCH V5 3/4] add TI DA8xx support: Add new directory for da830evm board   Nick Thompson
• [U-Boot] [PATCH V5 4/4] add TI DA8xx support: Integrate DA830 EVM support into U-Boot   Nick Thompson
• [U-Boot] [PATCH V4] Davinci: add a pin multiplexer configuration API   Nick Thompson
• [U-Boot] [PATCH V5 0/4] add TI DA8xx support:   Nick Thompson
• [U-Boot] [PATCH 2/3] DA8xx: Add MUSB host support   Nick Thompson
• [U-Boot] [PATCH 3/3] DA830: Add usb config   Nick Thompson
• [U-Boot] [PATCH v3] DA8xx: Add MUSB host support   Nick Thompson
• [U-Boot] [PATCH v3] DA8xx: Add MUSB host support   Nick Thompson
• [U-Boot] [PATCH] Davinci: Table driven pinmux configuration   Nick Thompson
• [U-Boot] [PATCH] TI: DaVinci: Updating EMAC driver for DM365 and DM646x   Nick Thompson
• [U-Boot] [PATCH] Davinci: Configurable NAND chip selects   Nick Thompson
• [U-Boot] [PATCH] Davinci: Configurable NAND chip selects   Nick Thompson
• [U-Boot] [PATCH V5 1/4] add TI DA8xx support: DA8xx includes   Nick Thompson
• [U-Boot] [PATCH] Davinci: Configurable NAND chip selects   Nick Thompson
• [U-Boot] [PATCH v2] Davinci: Configurable NAND chip selects   Nick Thompson
• [U-Boot] [PATCH RFC] nand: remove spurious read cycle in OOB first page reads   Nick Thompson
• [U-Boot] [PATCH RFC] nand: remove spurious read cycle in OOB first page reads   Nick Thompson
• [U-Boot] [PATCH RFC] NAND: Improve read performance from Large Page NAND devices   Nick Thompson
• [U-Boot] [PATCH 0/3] No GOT in IRQ and use r12 as GOT ptr   Joakim Tjernlund
• [U-Boot] [PATCH 1/3] ppc: Loose GOT access in IRQ   Joakim Tjernlund
• [U-Boot] [PATCH 2/3] ppc: Use r12 instead of r14 as GOT pointer.   Joakim Tjernlund
• [U-Boot] [PATCH 3/3] ppc: remove -ffixed-r14 gcc option.   Joakim Tjernlund
• [U-Boot] [PATCH 0/3] No GOT in IRQ and use r12 as GOT ptr   Joakim Tjernlund
• [U-Boot] [PATCH 0/4] Make u-boot true PIC for ppc   Joakim Tjernlund
• [U-Boot] [PATCH 1/4] ppc: Add const void *link_off(const void *addr)   Joakim Tjernlund
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Joakim Tjernlund
• [U-Boot] [PATCH 3/4] Use LINK_OFF in enviroment too   Joakim Tjernlund
• [U-Boot] [PATCH 4/4] ppc: Make mpc83xx start.S relative.   Joakim Tjernlund
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   Joakim Tjernlund
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   Joakim Tjernlund
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   Joakim Tjernlund
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   Joakim Tjernlund
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   Joakim Tjernlund
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   Joakim Tjernlund
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   Joakim Tjernlund
• [PATCH] crc32: Impl. linux optimized crc32()   Joakim Tjernlund
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   Joakim Tjernlund
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   Joakim Tjernlund
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   Joakim Tjernlund
• [U-Boot] [PATCH] crc32: Impl. linux optimized crc32()   Joakim Tjernlund
• [U-Boot] Does uboot EBS(erase block summary) to reduce JFFS2 scaning time?   Joakim Tjernlund
• [U-Boot] [PATCH] crc32: Impl. linux optimized crc32()   Joakim Tjernlund
• [U-Boot] [PATCH 0/3] No GOT in IRQ and use r12 as GOT ptr   Joakim Tjernlund
• [U-Boot] [PATCH] ppc: Update README about the new GOT ptr.   Joakim Tjernlund
• [U-Boot] [PATCH] crc32: minor cleanups and smaller size.   Joakim Tjernlund
• [U-Boot] [PATCH] crc32: more optimizations   Joakim Tjernlund
• [U-Boot] [PATCH] crc32: fix recent bug   Joakim Tjernlund
• [U-Boot] [PATCH v2] crc32: Impl. linux optimized crc32()   Joakim Tjernlund
• [U-Boot] [PATCH] crc32: Make crc32 build on non Linux too   Joakim Tjernlund
• [U-Boot] [PATCH] crc32: Make crc32 build on non Linux too   Joakim Tjernlund
• [U-Boot] [PATCH] crc32: Make crc32 build on non Linux too   Joakim Tjernlund
• [U-Boot] [PATCH] crc32: Make crc32 build on non Linux too   Joakim Tjernlund
• [U-Boot] [PATCH RFC] zlib: Optimize decompression   Joakim Tjernlund
• [U-Boot] [PATCH] add lzop decompression support   Joakim Tjernlund
• [U-Boot] [PATCH v2] crc32: Impl. linux optimized crc32()   Joakim Tjernlund
• [U-Boot] [PATCH v3] crc32: Impl. linux optimized crc32()   Joakim Tjernlund
• [U-Boot] [PATCH RFC] zlib: Optimize decompression   Joakim Tjernlund
• [U-Boot] [PATCH v3] crc32: Impl. linux optimized crc32()   Joakim Tjernlund
• [U-Boot] [PATCH v2] crc32: Impl. linux optimized crc32()   Joakim Tjernlund
• [U-Boot] [PATCH V2] arm/board.c: avoid ifdef using weak default functions   Joakim Tjernlund
• [U-Boot] [PATCH] ppc: transform init_sequence into a function.   Joakim Tjernlund
• [U-Boot] [PATCH V2] arm/board.c: avoid ifdef using weak default functions   Joakim Tjernlund
• [U-Boot] [PATCH] ppc: transform init_sequence into a function.   Joakim Tjernlund
• [U-Boot] [PATCH] ppc: transform init_sequence into a function.   Joakim Tjernlund
• [U-Boot] [PATCH] ppc: transform init_sequence into a function.   Joakim Tjernlund
• [U-Boot] [PATCH] ppc: transform init_sequence into a function.   Joakim Tjernlund
• [U-Boot] [PATCH] ppc: transform init_sequence into a function.   Joakim Tjernlund
• [U-Boot] [PATCH 02/10] USB add macros for debugging usb device setup.   Tom
• [U-Boot] [PATCH 08/10] OMAP3 zoom2 Use usbtty if the debug board is not connected.   Tom
• [U-Boot] [PATCH 09/10] OMAP3 USB Initialize twl4030 only if required   Tom
• [U-Boot] [PATCH] Add I2C multibus support for OMAP2/3 boards   Tom
• [U-Boot] [PATCH 02/10] USB add macros for debugging usb device setup.   Tom
• [U-Boot] [PATCH 08/10] OMAP3 zoom2 Use usbtty if the debug board is not connected.   Tom
• [U-Boot] [PATCH 02/10] USB add macros for debugging usb device setup.   Tom
• [U-Boot] [PATCH] Add I2C multibus support for OMAP2/3 boards   Tom
• [U-Boot] [PATCH] ARM: fix build error with gcc-4.4.2 about inline function declared weak   Tom
• [U-Boot] [PATCH-ARM 1/3] Add support for the s3c2440 cpu excluding nand driver   Tom
• [U-Boot] [PATCH-ARM 2/3] Add sc32440 support to the s3c2410 nand driver   Tom
• [U-Boot] [PATCH] ARM: fix build error with gcc-4.4.2 about inline function declared weak   Tom
• [U-Boot] [PATCH-ARM 3/3] Add Support for the SBC2440-II Board   Tom
• [U-Boot] [PATCH] sheevaplug: correct SDRAM address control register value   Tom
• [U-Boot] [PATCH] OMAP2/3: I2C: Add support for second and third bus   Tom
• [U-Boot] [PATCH] Don't inline weak symbols   Tom
• [U-Boot] v3 OMAP USB   Tom
• [U-Boot] status several (bugfix) patches...   Tom
• [U-Boot] status several (bugfix) patches...   Tom
• [U-Boot] s3c64xx: move s3c64xx header files to include/asm-arm/arch-s3c64xx   Tom
• [U-Boot] [PATCH] v2 Linuxstamp II 9260 support   Tom
• [U-Boot] [PATCH] v2 Linuxstamp II 9260 support   Tom
• [U-Boot] [PATCH V4 2/4] add TI DA8xx support: Add DA8xx cpu functions   Tom
• [U-Boot] [PATCH V4 3/4] add TI DA8xx support: Add new directory for da830evm board   Tom
• [U-Boot] [PATCH V4 4/4] add TI DA8xx support: Integrate DA830 EVM support into U-Boot   Tom
• [U-Boot] da8xx   Tom
• [U-Boot] v3 OMAP USB   Tom
• [U-Boot] [PATCH 2/2] ARM: fix build error with gcc-4.4.2 about inline function declared weak   Tom
• [U-Boot] [PATCH 1/2] ARM Conditionally compile board LED functions   Tom
• [U-Boot] [PATCH 1/2] ARM Conditionally compile board LED functions   Tom
• [U-Boot] [PATCH 2/2] OMAP3:SDRC: introduce DDR types   Tom
• [U-Boot] ARM pull request   Tom
• [U-Boot] [PATCH 2/2] OMAP3:SDRC: introduce DDR types   Tom
• [U-Boot] [PATCH 2/2] ARM: fix build error with gcc-4.4.2 about inline function declared weak   Tom
• [U-Boot] [PATCH] omap3: add CM-T35 board   Tom
• [U-Boot] [PATCH] OMAP3: pandora: fix booting without serial attached   Tom
• [U-Boot] [PATCH] OMAP3: pandora: fix booting without serial attached   Tom
• [U-Boot] ARM pull request   Tom
• [U-Boot] [PATCH V3] Davinci: add a pin multiplexer configuration API   Tom
• [U-Boot] [PATCH V5 0/4] add TI DA8xx support:   Tom
• [U-Boot] [PATCH V4] Davinci: add a pin multiplexer configuration API   Tom
• [U-Boot] [PATCH v2] OMAP3: pandora: fix booting without serial attached   Tom
• [U-Boot] [PATCH V5 0/4] add TI DA8xx support:   Tom
• [U-Boot] [PATCH 1/3] DA830: Add pinmux for USB0_DRVVBUS   Tom
• [U-Boot] [PATCH 1/2] ARM Conditionally compile board LED functions   Tom
• [U-Boot] [PATCH 1/3] DA830: Add pinmux for USB0_DRVVBUS   Tom
• [U-Boot] [PATCH 2/2] OMAP3:SDRC: introduce DDR types   Tom
• [U-Boot] [PATCH 3/4 v2] DA8xx: Add MUSB host support   Tom
• [U-Boot] Help command broken on AT91SAM9G10-EK   Tom
• [U-Boot] [PATCH v3] DA8xx: Add MUSB host support   Tom
• [U-Boot] [PATCH v3] DA8xx: Add MUSB host support   Tom
• [U-Boot] [PATCH] Initial support for Orion5x SoC and EDMini board   Tom
• [U-Boot] [PATCH] omap3: allow slection of NAND GPMC settings based on board config   Tom
• [U-Boot] ARM update mach-types   Tom
• [U-Boot] [PATCH] omap3: allow slection of NAND GPMC settings based on board config   Tom
• [U-Boot] [PATCH v4] OMAP3: add CM-T35 board   Tom
• [U-Boot] [PATCH v4] OMAP3: add CM-T35 board   Tom
• [U-Boot] [PATCH v4] OMAP3: add CM-T35 board   Tom
• [U-Boot] [PATCH v4] OMAP3: add CM-T35 board   Tom
• [U-Boot] TFTP on beagle board   Tom
• [U-Boot] [PATCH 3/4 v2] DA8xx: Add MUSB host support   Tom
• [U-Boot] [PATCH v2] BeagleBoard: Add a comment explaining the use of "OMAP34XX" macros.   Tom
• [U-Boot] Please pull u-boot-samsung/master   Tom
• [U-Boot] Please pull u-boot-ti/master   Tom
• [U-Boot] Please pull u-boot-ti/master   Tom
• [U-Boot] ARM pull request   Tom
• [U-Boot] Please pull u-boot-ti/master   Tom
• [U-Boot] [PATCH 0/5] Introducing TI's New SoC/board AM3517EVM   Tom
• [U-Boot] [PATCH resend] at91: Enable slow master clock on meesc board   Tom
• [U-Boot] [PATCH v7 2/2] arm: A320: Add support for Faraday A320 evaluation board   Tom
• [U-Boot] An error in u-boot-2009.08/cpu/arm920t/start.S   Tom
• [U-Boot] [PATCH] AT91: revise serial lines pullup configuration,   Tom
• [U-Boot] An error in u-boot-2009.08/cpu/arm920t/start.S   Tom
• [U-Boot] [PATCH 3/5] Added configuration file for AM3517EVM   Tom
• [U-Boot] [PATCH 4/5] AM3517EVM: Add mux configuration   Tom
• [U-Boot] [PATCH 5/5] AM3517: Add support for EMIF4   Tom
• [U-Boot] [PATCH] TI DaVinci: Adding a README for the DaVinci series of SOC's   Tom
• [U-Boot] [PATCH V2] arm/board.c: avoid ifdef using weak default functions   Tom
• [U-Boot] [PATCH V2] arm/board.c: avoid ifdef using weak default functions   Tom
• [U-Boot] [PATCH] NAND: Add config option for imx27lite   Tom
• [U-Boot] [PATCH 1/1] avr32/hsdramc: Move conditional compilation to Makefile   Tom
• [U-Boot] [PATCH] TI DaVinci: Adding a README for the DaVinci series of SOC's   Tom
• [U-Boot] [PATCH] omap3_mmc: Encapsulate twl4030 under option CONFIG_TWL4030_POWER   Tom
• [U-Boot] [PATCH V4] OMAP3EVM: Added NAND support   Tom
• [U-Boot] Breakage on arm/next   Tom
• [U-Boot] ARM pull request   Tom
• [U-Boot] twl4030_power_init cleanup proposal   Tom
• [U-Boot] [STATUS] v2009.11-rc1 is out   Albin Tonnerre
• [U-Boot] [PATCH v3] AT91: Add SD/MMC controller support   Albin Tonnerre
• [U-Boot] [PATCH] tsec: Force TBI PHY to 1000Mbps full duplex in SGMII mode   Peter Tyser
• [U-Boot] [PATCH] ppc: Move conditional compilation of kgdb.c to Makefile   Peter Tyser
• [U-Boot] [PATCH] tsec: Force TBI PHY to 1000Mbps full duplex in SGMII mode   Peter Tyser
• [U-Boot] [PATCH] ppc/85xx: Fix inclusion of 83xx immap in 85xx builds   Peter Tyser
• [U-Boot] [PATCH v2] Fix build failure in examples/standalone   Peter Tyser
• [U-Boot] [PATCH 1/5] tsec: Clean up Broadcom PHY status parsing   Peter Tyser
• [U-Boot] [PATCH 2/5] tsec: Make functions/data static when possible   Peter Tyser
• [U-Boot] [PATCH 3/5] tsec: General cleanup   Peter Tyser
• [U-Boot] [PATCH 4/5] tsec: Add support for using the BCM5482 PHY in fiber mode   Peter Tyser
• [U-Boot] [PATCH 5/5] tsec: Add TSEC_FIBER flag   Peter Tyser
• [U-Boot] [PATCH 1/5] tsec: Clean up Broadcom PHY status parsing   Peter Tyser
• [U-Boot] [PATCH] circbuf: Move to lib_generic and conditionally compile   Peter Tyser
• [U-Boot] [PATCH] m41t11: Remove unused functions   Peter Tyser
• [U-Boot] [PATCH v2 0/7] 83xx/85xx/86xx ECC update   Peter Tyser
• [U-Boot] [PATCH 1/7] 83xx: Add CCSR DDR register offsets   Peter Tyser
• [U-Boot] [PATCH 2/7] 85xx/86xx: Add ECC error injection defines   Peter Tyser
• [U-Boot] [PATCH 3/7] 83xx/85xx/86xx: Add ECC support   Peter Tyser
• [U-Boot] [PATCH 4/7] 83xx: Migrate CONFIG_DDR_ECC_CMD to CONFIG_EDAC_FSL_ECC   Peter Tyser
• [U-Boot] [PATCH 5/7] Add check for ECC errors during SDRAM POST and mtest   Peter Tyser
• [U-Boot] [PATCH 6/7] xes: Add 8xxx post support   Peter Tyser
• [U-Boot] [PATCH 7/7] xes: Enable memory POST and ECC error reporting   Peter Tyser
• [U-Boot] [PATCH 3/7] 83xx/85xx/86xx: Add ECC support   Peter Tyser
• [U-Boot] [PATCH 3/7] 83xx/85xx/86xx: Add ECC support   Peter Tyser
• [U-Boot] [PATCH 4/7] 83xx: Migrate CONFIG_DDR_ECC_CMD toCONFIG_EDAC_FSL_ECC   Peter Tyser
• [U-Boot] [PATCH 3/7] 83xx/85xx/86xx: Add ECC support   Peter Tyser
• [U-Boot] [PATCH] nfs: NfsTimeout() updates   Peter Tyser
• [U-Boot] [PATCH 3/7] 83xx/85xx/86xx: Add ECC support   Peter Tyser
• [U-Boot] [PATCH 3/7] 83xx/85xx/86xx: Add ECC support   Peter Tyser
• [U-Boot] [PATCH] omap3: add CM-T35 board   Peter Tyser
• [U-Boot] [PATCH] omap3: add CM-T35 board   Peter Tyser
• [U-Boot] [PATCH] cmd_license: Remove unneeded #ifdef CONFIG_CMD_LICENSE   Peter Tyser
• [U-Boot] [PATCH] Move do_irqinfo() to common/cmd_irq.c   Peter Tyser
• [U-Boot] Help command broken on AT91SAM9G10-EK   Peter Tyser
• [U-Boot] Help command broken on AT91SAM9G10-EK   Peter Tyser
• [U-Boot] Help command broken on AT91SAM9G10-EK   Peter Tyser
• [U-Boot] [PATCH] bootm: Fix help message's sub-command ordering   Peter Tyser
• [U-Boot] [PATCH] Remove entirely superfluous preprocessor tests from cmd_*.c files.   Peter Tyser
• [U-Boot] [PATCH] Move preprocessor test for cmd_nand.c to Makefile   Peter Tyser
• [U-Boot] Freescale ECC capture question   Peter Tyser
• [U-Boot] include/asm-blackfin/mmc.h???   Peter Tyser
• [U-Boot] [PATCH v2 2/6] Move lib_<ARCH> directories to lib/<ARCH>   Peter Tyser
• [U-Boot] [PATCH 1/3] 83xx: Default to using DMA to initialize SDRAM   Peter Tyser
• [U-Boot] [PATCH 3/5] xes: Enable the 'ecc' command   Peter Tyser
• [U-Boot] [PATCH 1/3] tools/mkimage: Assume FDT image type for FIT images   Peter Tyser
• [U-Boot] [PATCH 2/3] tools/fit_image.c: Remove unused fit_set_header()   Peter Tyser
• [U-Boot] [PATCH 3/3] tools/mkimage: Print FIT image contents after creation   Peter Tyser
• [U-Boot] Problem in Building the Bootloader for the NAND Flash MPC8313ERDB Board   Balu V
• [U-Boot] u-boot for iMX27 board   Intur Venkatesulu
• [U-Boot] u-boot for freescale iMX27 Baord   Intur Venkatesulu
• [U-Boot] USB virtual serial(usbtty) not working through USB hub   Nagendra Verma
• [U-Boot] [PATCH] fsl_pci_init_port end-point initialization isbroken   Mahajan Vivek-B08308
• [U-Boot] [PATCH v2] fsl_pci_init_port end-point initialization is broken   Mahajan Vivek-B08308
• [U-Boot] SDCARD Support - MPC8315e   Anton Vorontsov
• [U-Boot] [PATCH] mpc83xx: Add NAND boot support for MPC8315E-RDB boards   Anton Vorontsov
• [U-Boot] [PATCH v2] mpc83xx: Add NAND boot support for MPC8315E-RDB boards   Anton Vorontsov
• [U-Boot] Best way of making some drivers common across kirkwood and orion5x SoCs?   Prafulla Wadaskar
• [U-Boot] Best way of making some drivers common across kirkwood and orion5x SoCs?   Prafulla Wadaskar
• [U-Boot] Best way of making some drivers common across kirkwood and orion5x SoCs?   Prafulla Wadaskar
• [U-Boot] Best way of making some drivers common across kirkwood and orion5x SoCs?   Prafulla Wadaskar
• [U-Boot] [PATCH v2 1/2]: common: Add a watchdog CLI command   Prafulla Wadaskar
• [U-Boot] Best way of making some drivers common across kirkwood and orion5x SoCs?   Prafulla Wadaskar
• [U-Boot] Best way of making some drivers common across kirkwood and orion5x SoCs?   Prafulla Wadaskar
• [U-Boot] [PATCH] Initial support for Orion5x SoC and EDMini board   Prafulla Wadaskar
• [U-Boot] [PATCH] Initial support for Orion5x SoC and EDMini board   Prafulla Wadaskar
• [U-Boot] [PATCH V2 1/3 CORRECTED] Initial support for Marvell Orion5x SoC   Prafulla Wadaskar
• [U-Boot] [PATCH V2 3/3] Add support for the LaCie ED Mini V2 board   Prafulla Wadaskar
• [U-Boot] [PATCH] Kirkwood: Makefile cleanup- fixed ordering (cosmetic change)   Prafulla Wadaskar
• [U-Boot] [PATCH V2 1/3 CORRECTED] Initial support for Marvell Orion5x SoC   Prafulla Wadaskar
• [U-Boot] [RFC/PATCH 1/2]: Arm: Kirkwood: Split PHY-related initialization to a common file   Prafulla Wadaskar
• [U-Boot] [PATCH] ARM: fix build error with gcc-4.4.2 about inline function declared weak   Gaye Abdoulaye Walsimou
• [U-Boot] [PATCH 2/2] ARM: fix build error with gcc-4.4.2 about inline function declared weak   Gaye Abdoulaye Walsimou
• [U-Boot] status several (bugfix) patches...   Ben Warren
• [U-Boot] [PATCH 4/4] ARM Add New Board GEC2410   Ben Warren
• [U-Boot] [PATCH 0/3] enable CONFIG_NET_MULTI for LAN91C96   Ben Warren
• [U-Boot] MPC8360ERDK and DP83848   Ben Warren
• [U-Boot] [PATCH] Fix cs8900 dev->priv not init issue   Ben Warren
• [U-Boot] [PATCH] Fix CS8900 regression on impa7 board   Ben Warren
• [U-Boot] [PATCH] smc91111_eeprom: fix compile warning   Ben Warren
• [U-Boot] [PATCH] Fix SMC91111 regression: lpd7a40x build failures   Ben Warren
• [U-Boot] [PATCH] smc91111_eeprom: fix compile warning   Ben Warren
• [U-Boot] [PATCH] SMC91111: Clean up SMC_inx macros on xsengine and xaeniax   Ben Warren
• [U-Boot] [PATCH 1/3] NET: LAN91C96 CONFIG_NET_MULTIify   Ben Warren
• [U-Boot] [PATCH 2/3] TI OMAP3: SDP3430 FIX NET_MULTI Warning   Ben Warren
• [U-Boot] [PATCH 3/3] LAN91C96: Enable NET_MULTI LAN driver   Ben Warren
• [U-Boot] [PATCH] Repair the 'netry=once' option.   Ben Warren
• [U-Boot] [PATCH] Add error codes/handling for TFTP-server   Ben Warren
• [U-Boot] [u-boot] [PATCH] [1/2] [v1.2] mxc_fec: fix some erroneous PHY accesses.   Ben Warren
• [U-Boot] [u-boot] [PATCH] [2/2] [v1.4] mxc_fec: avoid free() calls to already freed pointers.   Ben Warren
• [U-Boot] [PATCH 1/1] net: pull CONFIG checks out of source and into makefile   Ben Warren
• [U-Boot] [PATCH v2] OMAP3: add CM-T35 board   Ben Warren
• [U-Boot] Pull request - net   Ben Warren
• [U-Boot] [PATCH 2/5] smc911x: use dev->name in printfs   Ben Warren
• [U-Boot] [PATCH 2/5] smc911x: use dev->name in printfs   Ben Warren
• [U-Boot] Pull request - net [for 2009.11]   Ben Warren
• [U-Boot] [PATCH] smc911x: fix typo in smc911x_handle_mac_address name   Ben Warren
• [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27   Ben Warren
• [U-Boot] why is the compilation of cmd_pcmcia.c hardcoded?   Ben Warren
• [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27   Ben Warren
• [U-Boot] [PATCH RFC] TFTP: allow for adjustable retransmission timout   Ben Warren
• [U-Boot] Pull request - net   Ben Warren
• [U-Boot] Unable to launch menuconfig   Ben Warren
• [U-Boot] Unable to launch menuconfig   Ben Warren
• [U-Boot] Ttftp problem while retrieving a file   Ben Warren
• [U-Boot] Help command broken on AT91SAM9G10-EK   Justin Waters
• [U-Boot] Help command broken on AT91SAM9G10-EK   Justin Waters
• [U-Boot] Help command broken on AT91SAM9G10-EK   Justin Waters
• [U-Boot] Help command broken on AT91SAM9G10-EK   Justin Waters
• [U-Boot] Help command broken on AT91SAM9G10-EK   Justin Waters
• [U-Boot] [PATCH] non-blocking flash write/erase/status check functions   Wolfgang Wegner
• [U-Boot] [RFC PATCH] Implementation of non-blocking flash write/erase/status check functions.   Wolfgang Wegner
• [U-Boot] AT91SAM9263 with DM8203 Phy   Matthias Wieloch
• [U-Boot] [PATCH 1/1] cmd_nand: push CONFIG check to Makefile   Scott Wood
• [U-Boot] [PATCH v2] makefiles: fixes for building build tools   Scott Wood
• [U-Boot] [PATCH] NAND: Update to support 64 bit device size   Scott Wood
• [U-Boot] [PATCH 1/3] [OneNAND] Flex-OneNAND driver support   Scott Wood
• [U-Boot] [PATCH 3/3] [OneNAND] Flex-OneNAND boundary settings   Scott Wood
• [U-Boot] Quick sanity test after my NAND patches   Scott Wood
• [U-Boot] [PATCH] NAND: Allow drivers to choose ECC block size   Scott Wood
• [U-Boot] Quick sanity test after my NAND patches   Scott Wood
• [U-Boot] [PATCH 1/6] NAND: Correct the "chip_shift" calculation   Scott Wood
• [U-Boot] [PATCH] fsl_elbc_nand: remove the bbt descriptors relocation fixup   Scott Wood
• [U-Boot] [PATCH 3/3] [OneNAND] Flex-OneNAND boundary settings   Scott Wood
• [U-Boot] [PATCH 1/3] [OneNAND] Flex-OneNAND driver support   Scott Wood
• [U-Boot] [RFC 4/4] MXC: Reorganize 16 bit nand detection.   Scott Wood
• [U-Boot] [PATCH v1 2/3] mxc_nand: Update driver to work with i.MX31.   Scott Wood
• [U-Boot] [PATCH v2] makefiles: fixes for building build tools   Scott Wood
• [U-Boot] Pull request: nand flash next   Scott Wood
• [U-Boot] [PATCH] flash.h: pull in common.h for types   Scott Wood
• [U-Boot] [PATCH] flash.h: pull in common.h for types   Scott Wood
• [U-Boot] [PATCH V5 1/4] add TI DA8xx support: DA8xx includes   Scott Wood
• [U-Boot] [PATCH] Clarify applicable licensing terms in COPYING file.   Scott Wood
• [U-Boot] [PATCH] OMAP3EVM: Added NAND support   Scott Wood
• [U-Boot] [PATCH] Clarify applicable licensing terms in COPYING file.   Scott Wood
• [U-Boot] [PATCH] Davinci: Configurable NAND chip selects   Scott Wood
• [U-Boot] [PATCH] NAND: Update read_read_subpage API check   Scott Wood
• [U-Boot] [PATCH] NAND:Extending the nand_ecclayout structure   Scott Wood
• [U-Boot] [PATCH 1/1] S3C2410 NAND Flash Add Missing Function   Scott Wood
• [U-Boot] [PATCH] Move preprocessor test for cmd_nand.c to Makefile   Scott Wood
• [U-Boot] [PATCH RFC] nand: remove spurious read cycle in OOB first page reads   Scott Wood
• [U-Boot] [PATCH] NAND: Add Support for 4K page size in DaVinci NAND driver   Scott Wood
• [U-Boot] Pull request: nand flash next   Scott Wood
• [U-Boot] [PATCH RFC] nand: remove spurious read cycle in OOB first page reads   Scott Wood
• [U-Boot] PowerPC chipselects   Scott Wood
• [U-Boot] I can not read Linux image from my nand flash   Scott Wood
• [U-Boot] [PATCH] ppc/85xx: Add PIB/ATM support for MPC8569mds   Liu Yu
• [U-Boot] [PATCH 1/2] ppc/85xx: Add PIB/ATM support for MPC8569mds   Liu Yu
• [U-Boot] [PATCH 2/2] ppc/85xx: Add ATM config for MPC8569MDS   Liu Yu
• [U-Boot] u-boot: How to read file from FAT filesystem on NorFlash MTD partition   Xianwei Zeng
• [U-Boot] u-boot: How to read file from FAT filesystem on NorFlash MTD partition   Xianwei Zeng
• [U-Boot] u-boot: How to read file from FAT filesystem on NorFlash MTD partition   Xianwei Zeng
• [U-Boot] u-boot: How to read file from FAT filesystem on NorFlash MTD partition   Xianwei Zeng
• [U-Boot] [PATCH] Don't inline weak symbols   Roman Zeyde
• [U-Boot] [PATCH] Enable port-mapped access to 16550 UART   Detlev Zundel
• [U-Boot] [STATUS] v2009.11-rc1 is out   Detlev Zundel
• [U-Boot] [STATUS] v2009.11-rc1 is out   Detlev Zundel
• [U-Boot] redundant code in common/cmd_i2c.   Detlev Zundel
• [U-Boot] Add new command to U-boot   Detlev Zundel
• [U-Boot] Problem with SDRAM on my board.   Detlev Zundel
• [U-Boot] U-Boot hangs when board is attached to BDI2000   Detlev Zundel
• [U-Boot] [ board/sbc2410x ]   lementec fabien
• [U-Boot] multiple partitions in mtdparts   myuboot at fastmail.fm
• [U-Boot] multiple partitions in mtdparts   myuboot at fastmail.fm
• [U-Boot] [PATCH-ARM 1/3] Add support for the s3c2440 cpu excluding nand driver   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM 2/3] Add sc32440 support to the s3c2410 nand driver   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM 3/3] Add Support for the SBC2440-II Board   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM 1/3] Add support for the s3c2440 cpu excluding nand driver   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH ARM] Move s3c24x0 header files to asm-arm/arch-s3c24x0/   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH ARM] Clean-up of s3c24x0 header files   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH ARM] Clean-up of s3c24x0 header files   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH ARM v2] Clean-up of s3c24x0 header files   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH ARM] Update the s3c2410 nand driver from linux-2.6.31.5   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH ARM] Add a unified s3c24x0 header file   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH ARM] Add a unified s3c24x0 header file   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH ARM] Add a unified s3c24x0 header file   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH ARM v2] Add a unified s3c24x0 header file   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] Invitation to connect on LinkedIn   praveen garaga
• [U-Boot] MAKE MONEY FAST!!   info at geniedream.com
• [U-Boot] u-boot: Not enough room for program headers (allocated 3, need 4)   anupbehare at gmail.com
• [U-Boot] dts support in u-boot   anupbehare at gmail.com
• [U-Boot] dts support in u-boot   anupbehare at gmail.com
• [U-Boot] Cute Kid of the Year - enter to win $25,000   TheCuteKid at iammyownboss.co.uk
• [U-Boot] [VIDEO] Check This $636,217.33 CPA Account For FREE   boss at iammyownboss.co.uk
• [U-Boot] How Would you Like To Say Goodbye To Your Power Bill...?   boss at iammyownboss.co.uk
• [U-Boot] MPC8360ERDK and DP83848   Jon.Gadsden at invensysrail.com
• [U-Boot] PowerPC chipselects   julianosam
• [U-Boot] U-boot with BDI   stephanie keeling
• [U-Boot] Add new command to U-boot   stephanie keeling
• [U-Boot] Enhanced sd host controller driver for the mxc platform   stephanie keeling
• [U-Boot] loading applications sequentially.   ronny meeus
• [U-Boot] framework for serial flash   ashish priyadarshi
• [U-Boot] framework for serial flash   ashish priyadarshi
• [U-Boot] [STATUS] v2009.11-rc1 is out   rhabarber1848
• [U-Boot] [STATUS] v2009.11-rc1 is out   rhabarber1848
• [U-Boot] [STATUS] v2009.11-rc1 is out   rhabarber1848
• [U-Boot] Support dbox in mainline, was: Re: [STATUS] v2009.11-rc1 is out   rhabarber1848
• [U-Boot] at91SAM7S9263B-EK + u-boot using sd card: linux uncompress ... crc error   Thomas.Schulte at saf-kassel.de
• [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27   alfred steele
• [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27   alfred steele
• [U-Boot] [PATCH] OMAP3EVM: Added NAND support   hvaibhav at ti.com
• [U-Boot] [PATCH] OMAP3EVM: Added NAND support   hvaibhav at ti.com
• [U-Boot] [PATCH V3] OMAP3EVM: Added NAND support   hvaibhav at ti.com
• [U-Boot] [PATCH V4] OMAP3EVM: Added NAND support   hvaibhav at ti.com
• [U-Boot] [PATCH] omap3_mmc: Encapsulate twl4030 under option CONFIG_TWL4030_POWER   hvaibhav at ti.com
• [U-Boot] [PATCH 1/5] Introducing AM3517EVM support   hvaibhav at ti.com
• [U-Boot] [PATCH 0/5] Introducing TI's New SoC/board AM3517EVM   hvaibhav at ti.com
• [U-Boot] [PATCH 2/5] am3517_evm_config options added to Makfile   hvaibhav at ti.com
• [U-Boot] [PATCH 3/5] Added configuration file for AM3517EVM   hvaibhav at ti.com
• [U-Boot] [PATCH 4/5] AM3517EVM: Add mux configuration   hvaibhav at ti.com
• [U-Boot] [PATCH 5/5] AM3517: Add support for EMIF4   hvaibhav at ti.com
• [U-Boot] [PATCH] NAND: Don't walk past end of oobfree[]   s-paulraj at ti.com
• [U-Boot] [PATCH] NAND: Allow drivers to choose ECC block size   s-paulraj at ti.com
• [U-Boot] [PATCH] NAND: fix "raw" reads with ECC syndrome layouts   s-paulraj at ti.com
• [U-Boot] [PATCH] NAND: Update the nand_read_subpage comments/explanation   s-paulraj at ti.com
• [U-Boot] [PATCH] NAND: Update comment for nand_scan_tail in NAND driver   s-paulraj at ti.com
• [U-Boot] [PATCH] NAND: Correct the "chip_shift" calculation   s-paulraj at ti.com
• [U-Boot] [PATCH] NAND: Subpage shift for ecc_steps equal to 16   s-paulraj at ti.com
• [U-Boot] [PATCH] NAND: Remove commented out code   s-paulraj at ti.com
• [U-Boot] [PATCH 1/6] NAND: Correct the "chip_shift" calculation   s-paulraj at ti.com
• [U-Boot] [PATCH 2/6] NAND: Remove commented out code   s-paulraj at ti.com
• [U-Boot] [PATCH 3/6] NAND: Subpage shift for ecc_steps equal to 16   s-paulraj at ti.com
• [U-Boot] [PATCH 4/6] NAND: Updating comments/explanations in the NAND driver   s-paulraj at ti.com
• [U-Boot] [PATCH 5/6] NAND: Update check condition for nand_read_page_hwecc API   s-paulraj at ti.com
• [U-Boot] [PATCH 6/6] NAND: Don't walk past end of oobfree[]   s-paulraj at ti.com
• [U-Boot] [PATCH v2] NAND: fix "raw" reads with ECC syndrome layouts   s-paulraj at ti.com
• [U-Boot] [PATCH] TI: DaVinci: Updating EMAC driver for DM365 and DM646x   s-paulraj at ti.com
• [U-Boot] [PATCH] NAND:Extending the nand_ecclayout structure   s-paulraj at ti.com
• [U-Boot] [PATCH] NAND: Update read_read_subpage API check   s-paulraj at ti.com
• [U-Boot] [PATCH] NAND: Add Support for 4K page size in DaVinci NAND driver   s-paulraj at ti.com
• [U-Boot] [PATCH] TI DaVinci: Adding a README for the DaVinci series of SOC's   s-paulraj at ti.com
• [U-Boot] [PATCH] NAND: Add config option for imx27lite   s-paulraj at ti.com
• [U-Boot] Please pull u-boot-ti/master   s-paulraj at ti.com
• [U-Boot] strex/ldrex compilation error while using atomic_inc u-boot   akshay ts
• [U-Boot] Arbeit zu Hause - Deutschland   aerolitoral at tuagentedeseguros.com
• [U-Boot] [PATCH] NAND: fix "raw" reads with ECC syndrome layouts   dbrownell at users.sourceforge.net
• [U-Boot] [PATCH] ARM: fix build error with gcc-4.4.2 about inline function declared weak   walsimou at walsimou.com
• [U-Boot] Urgent Order   jim wilson
• [U-Boot] [PATCH] S3C6400/SMDK6400: fix stack_setup in start.S   이승현
• [U-Boot] [PATCH] fix flash_sect_erase() to display correct message   이승현

Last message date: Mon Nov 30 23:53:08 CET 2009
Archived on: Mon Nov 30 23:53:47 CET 2009

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...