[U-Boot] [PATCH 1/2] ppc/85xx: Add PIB/ATM support for MPC8569mds
Liu Yu
yu.liu at freescale.com
Fri Nov 27 08:31:51 CET 2009
Signed-off-by: Liu Yu <yu.liu at freescale.com>
---
board/freescale/common/pq-mds-pib.c | 2 +-
board/freescale/mpc8569mds/mpc8569mds.c | 7 +++++++
2 files changed, 8 insertions(+), 1 deletions(-)
diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c
index 6c72aa1..5f7a67d 100644
--- a/board/freescale/common/pq-mds-pib.c
+++ b/board/freescale/common/pq-mds-pib.c
@@ -63,7 +63,7 @@ int pib_init(void)
#endif
#if defined(CONFIG_PQ_MDS_PIB_ATM)
-#if defined(CONFIG_MPC8360EMDS)
+#if defined(CONFIG_MPC8360EMDS) || defined(CONFIG_MPC8569MDS)
val8 = 0;
i2c_write(0x20, 0x6, 1, &val8, 1);
i2c_write(0x20, 0x7, 1, &val8, 1);
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index cdd7813..02e6920 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -39,6 +39,9 @@
#include <fsl_esdhc.h>
#include "bcsr.h"
+#if defined(CONFIG_PQ_MDS_PIB)
+#include "../common/pq-mds-pib.h"
+#endif
phys_size_t fixed_sdram(void);
@@ -542,6 +545,10 @@ pci_init_board(void)
r = hose->regions;
pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
+#if defined(CONFIG_PQ_MDS_PIB)
+ pib_init();
+#endif
+
if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE connected to slot as %s (base address %x)",
pcie_ep ? "End Point" : "Root Complex",
--
1.6.4
More information about the U-Boot
mailing list