[U-Boot] [PATCH 2/2] OMAP3:SDRC: introduce DDR types

[Steve Sakoman]

On Mon, Nov 9, 2009 at 5:13 AM, Tom <Tom.Rix at windriver.com> wrote:
> Steve Sakoman wrote:
>>
>> On Sat, Nov 7, 2009 at 10:15 AM, Paulraj, Sandeep <s-paulraj at ti.com>
>> wrote:
>>>>>>
>>>>>> Introduce Micron DDR timings and provide
>>>>>> CONFIG_OMAP3_INFINEON_DDR and CONFIG_OMAP3_MICRON_DDR config
>>>>>> options to allow for platform files to setup their timings as
>>>>>> per the type of DDR selected
>>>>>>
>>>>>> Reported-by: Steve Sakoman in
>>>>>>
>>>>
>>>> http://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page
>>>>>>
>>>>>> =y
>>>>>>
>>>>>> Signed-off-by: Nishanth Menon <nm at ti.com>
>>>>>> ---
>>>>>>  include/asm-arm/arch-omap3/mem.h |   88
>>>>
>>>> ++++++++++++++++++++++++++++++---
>>>>>>
>>>>>> -----
>>>>>>  include/configs/devkit8000.h     |    3 +
>>>>>>  include/configs/omap3_beagle.h   |    3 +
>>>>>>  include/configs/omap3_evm.h      |    3 +
>>>>>>  include/configs/omap3_overo.h    |    3 +
>>>>>>  include/configs/omap3_pandora.h  |    3 +
>>>>>>  include/configs/omap3_sdp3430.h  |    3 +
>>>>>>  include/configs/omap3_zoom1.h    |    3 +
>>>>>>  include/configs/omap3_zoom2.h    |    3 +
>>>>>>  9 files changed, 94 insertions(+), 18 deletions(-)
>>>>>>
>>>>> Pushed to u-boot-ti/next
>>>>>
>>>>> I think this series from Nishanth needs some runtime tests.
>>>>> I believe Steve had some issues with his EVM not booting everytime due
>>>>
>>>> to issues with DDR init.
>>>>>
>>>>> Thanks,
>>>>> Sandeep
>>>>
>>>> Maybe it should go on the testing branch?
>>>>
>>>> I will give zoom2 a try..
>>>>
>>>> Tom
>>>>
>>> Nishanth has already tried on SDP 3430.
>>> I think the board that needs to be tried is overo.
>>
>> Correct, it was Overo, though I suspect Beagle might have the same
>> issue since they use the same Micron POP memory.  I'll try to test
>> this weekend.
>>
>> Steve
>
> I can try that too.
>
> Did you see the problem on warm or cold booting?

IIRC, it was an issue with both warm and cold boots.

Steve