[U-Boot] [PATCH 04/10] ARM Add New Board GEC2410

[Minkyu Kang]

Dear Hui Tang

2009/11/3 Hui Tang <zetalabs at gmail.com>:
> Dear Wolfgang,
>
> 2009/11/1 Wolfgang Denk <wd at denx.de>:
>> Dear "Hui.Tang",
>>
>> In message <6c7a9a5dcafb1f535ed33cb29d579db993846325.1256898456.git.zetalabs at gmail.com> you wrote:
>>> Add gec2410_config option for GEC2410
>>>
>>> Signed-off-by: Hui.Tang <zetalabs at gmail.com>
>>> ---
>>>  Makefile |    7 +++++++
>>>  1 files changed, 7 insertions(+), 0 deletions(-)
>>
>> This belongs all in one commit.
>>
>>> index bcb3fe9..2de0b1d 100644
>>> --- a/Makefile
>>> +++ b/Makefile
>>> @@ -2951,6 +2951,13 @@ davinci_dm365evm_config :      unconfig
>>>  davinci_dm6467evm_config :   unconfig
>>>       @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
>>>
>>> +gec2410_config       :       unconfig
>>> +     @mkdir -p $(obj)include $(obj)board/gec/gec2410
>>> +     @mkdir -p $(obj)nand_spl/board/gec/gec2410
>>> +     @echo "RAM_TEXT = 0x33e00000" >> $(obj)board/gec/gec2410/config.tmp
>>> +     @$(MKCONFIG) $(@:_config=) arm arm920t gec2410 gec s3c24x0
>>> +     @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
>>> +
>>>  imx27lite_config:    unconfig
>>>       @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
>>
>> An ARM920 board does not belong into the arm926ejs block.
>>
>
> I have put the board config in the part of
>
> ########################################################################
> ## ARM Integrator boards - see doc/README-integrator for more info.
>
> as the sbc2410x_config does,
>
> Would you please give me some advice where should I put the gec2410
> board config?

I think, It is better to put bottom of s3c24x0 board series. (next to VCMA9)

>
> Thanks.
>
> BR.
> Hui.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>

Thanks
Minkyu Kang
-- 
from. prom.
www.promsoft.net