[U-Boot] [PATCH] v2 Linuxstamp II 9260 support

[Paul Thomas]

>
> Another partition.c...
> Looking for
>
> ugrep Ulf
> ./board/ronetix/pm9263/partition.c
>  * Ulf Samuelsson <ulf at atmel.com>
> ./board/ronetix/pm9261/partition.c
>  * Ulf Samuelsson <ulf at atmel.com>
> ./board/atmel/at91sam9261ek/partition.c
>  * Ulf Samuelsson <ulf at atmel.com>
> ./board/atmel/at91sam9260ek/partition.c
>  * Ulf Samuelsson <ulf at atmel.com>
> ./board/atmel/at91sam9263ek/partition.c
>  * Ulf Samuelsson <ulf at atmel.com>
> ./board/atmel/at91sam9rlek/partition.c
>  * Ulf Samuelsson <ulf at atmel.com>
> ./board/atmel/at91cap9adk/partition.c
>  * Ulf Samuelsson <ulf at atmel.com>
> ./board/atmel/at91rm9200dk/partition.c
>  * Ulf Samuelsson <ulf at atmel.com>
> ./board/atmel/at91rm9200ek/led.c
>  * Ulf Samuelsson <ulf at atmel.com>
> ./board/esd/meesc/partition.c
>  * Ulf Samuelsson <ulf at atmel.com>
> ./include/configs/at91rm9200ek.h
>  * Ulf Samuelsson <ulf at atmel.com>
>
> Why do we need another copy?
> Please move this to arm926ejs/at91/
> If you are feeling adventurous, move the others, else I will take
> care of it once this change is committed
>

I think the partition.c file should stay with the board and not move
to arm926ejs/at91/. It's probably the case that most of the boards are
using the 8MB dataflash with the same partition table, but it is still
a board specific configuration.

thanks,
Paul