[U-Boot] [ board/sbc2410x ]

[lementec fabien]

Hi,

I cloned the uboot git and compile a version for
the board/sbc2410x. I dont see any prompt after
reset.

The way I use the u-boot.bin is by flashing my
nand first. I then tried to load the file in nor
memory with an inchip downloader. at address
0x33f80000.  Same result, no prompt...

Any help would be very appreciated,

Thanks for the good work,

Flm.

-- 
"make it work, make it right, make it fast"