[U-Boot] [PATCH 1/4 v5] DA830: Add pinmux for USB0_DRVVBUS

[Ajay Kumar Gupta]

USB0_DRVVBUS pinmux configuration is required for USB functinality
in uboot.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta at ti.com>
Signed-off-by: Swaminathan S <swami.iyer at ti.com>
---
 board/davinci/da830evm/da830evm.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/board/davinci/da830evm/da830evm.c b/board/davinci/da830evm/da830evm.c
index bb8cc3c..7cf6013 100644
--- a/board/davinci/da830evm/da830evm.c
+++ b/board/davinci/da830evm/da830evm.c
@@ -65,6 +65,11 @@ const struct pinmux_config i2c_pins[] = {
 	{ pinmux[9], 2, 4 }
 };
 
+/* USB0_DRVVBUS pin muxer settings */
+const struct pinmux_config usb_pins[] = {
+	{ pinmux[9], 1, 1 }
+};
+
 int board_init(void)
 {
 #ifndef CONFIG_USE_IRQ
@@ -118,6 +123,9 @@ int board_init(void)
 	if (davinci_configure_pin_mux(i2c_pins, ARRAY_SIZE(i2c_pins)) != 0)
 		return 1;
 
+	if (davinci_configure_pin_mux(usb_pins, ARRAY_SIZE(usb_pins)) != 0)
+		return 1;
+
 	/* enable the console UART */
 	writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
 		DAVINCI_UART_PWREMU_MGMT_UTRST),
-- 
1.6.2.4