[U-Boot] [PATCH 2/5] tsec: Make functions/data static when possible
Peter Tyser
ptyser at xes-inc.com
Mon Nov 9 20:09:45 CET 2009
This is generally good practice and saves ~150 bytes.
Signed-off-by: Peter Tyser <ptyser at xes-inc.com>
---
drivers/net/tsec.c | 90 +++++++++++++++++++++++++++-------------------------
include/tsec.h | 1 -
2 files changed, 47 insertions(+), 44 deletions(-)
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index 1038285..fd8896c 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -48,14 +48,15 @@ static int tsec_send(struct eth_device *dev,
volatile void *packet, int length);
static int tsec_recv(struct eth_device *dev);
static int tsec_init(struct eth_device *dev, bd_t * bd);
+static int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info);
static void tsec_halt(struct eth_device *dev);
static void init_registers(volatile tsec_t * regs);
static void startup_tsec(struct eth_device *dev);
static int init_phy(struct eth_device *dev);
void write_phy_reg(struct tsec_private *priv, uint regnum, uint value);
uint read_phy_reg(struct tsec_private *priv, uint regnum);
-struct phy_info *get_phy_info(struct eth_device *dev);
-void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd);
+static struct phy_info *get_phy_info(struct eth_device *dev);
+static void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd);
static void adjust_link(struct eth_device *dev);
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
&& !defined(BITBANGMII)
@@ -112,7 +113,7 @@ int tsec_standard_init(bd_t *bis)
/* Initialize device structure. Returns success if PHY
* initialization succeeded (i.e. if it recognizes the PHY)
*/
-int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info)
+static int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info)
{
struct eth_device *dev;
int i;
@@ -174,7 +175,7 @@ int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info)
* that it returns success if the link is up, failure otherwise.
* This allows u-boot to find the first active controller.
*/
-int tsec_init(struct eth_device *dev, bd_t * bd)
+static int tsec_init(struct eth_device *dev, bd_t * bd)
{
uint tempval;
char tmpbuf[MAC_ADDR_LEN];
@@ -243,7 +244,8 @@ static void tsec_local_mdio_write(volatile tsec_mdio_t *phyregs, uint addr,
* notvalid bit cleared), and the bus to cease activity (miimind
* busy bit cleared), and then returns the value
*/
-uint tsec_local_mdio_read(volatile tsec_mdio_t *phyregs, uint phyid, uint regnum)
+static uint tsec_local_mdio_read(volatile tsec_mdio_t *phyregs,
+ uint phyid, uint regnum)
{
uint value;
@@ -342,7 +344,7 @@ static int init_phy(struct eth_device *dev)
* Returns which value to write to the control register.
* For 10/100, the value is slightly different
*/
-uint mii_cr_init(uint mii_reg, struct tsec_private * priv)
+static uint mii_cr_init(uint mii_reg, struct tsec_private * priv)
{
if (priv->flags & TSEC_GIGABIT)
return MIIM_CONTROL_INIT;
@@ -353,7 +355,7 @@ uint mii_cr_init(uint mii_reg, struct tsec_private * priv)
/*
* Wait for auto-negotiation to complete, then determine link
*/
-uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
+static uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
{
/*
* Wait if the link is up, and autonegotiation is in progress
@@ -407,7 +409,7 @@ uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
*
* Stolen from Linux's mii.c and phy_device.c
*/
-uint mii_parse_link(uint mii_reg, struct tsec_private *priv)
+static uint mii_parse_link(uint mii_reg, struct tsec_private *priv)
{
/* We're using autonegotiation */
if (mii_reg & PHY_BMSR_AUTN_ABLE) {
@@ -476,7 +478,7 @@ uint mii_parse_link(uint mii_reg, struct tsec_private *priv)
* link. "Ethernet at Wirespeed" reduces advertised speed until link
* can be achieved.
*/
-uint mii_BCM54xx_wirespeed(uint mii_reg, struct tsec_private *priv)
+static uint mii_BCM54xx_wirespeed(uint mii_reg, struct tsec_private *priv)
{
return (read_phy_reg(priv, mii_reg) & 0x8FFF) | 0x8010;
}
@@ -485,7 +487,7 @@ uint mii_BCM54xx_wirespeed(uint mii_reg, struct tsec_private *priv)
* Parse the BCM54xx status register for speed and duplex information.
* The linux sungem_phy has this information, but in a table format.
*/
-uint mii_parse_BCM54xx_sr(uint mii_reg, struct tsec_private *priv)
+static uint mii_parse_BCM54xx_sr(uint mii_reg, struct tsec_private *priv)
{
/* If there is no link, speed and duplex don't matter */
if (!priv->link)
@@ -530,7 +532,7 @@ uint mii_parse_BCM54xx_sr(uint mii_reg, struct tsec_private *priv)
/* Parse the 88E1011's status register for speed and duplex
* information
*/
-uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv)
+static uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv)
{
uint speed;
@@ -588,7 +590,7 @@ uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv)
/* Parse the RTL8211B's status register for speed and duplex
* information
*/
-uint mii_parse_RTL8211B_sr(uint mii_reg, struct tsec_private * priv)
+static uint mii_parse_RTL8211B_sr(uint mii_reg, struct tsec_private * priv)
{
uint speed;
@@ -646,7 +648,7 @@ uint mii_parse_RTL8211B_sr(uint mii_reg, struct tsec_private * priv)
/* Parse the cis8201's status register for speed and duplex
* information
*/
-uint mii_parse_cis8201(uint mii_reg, struct tsec_private * priv)
+static uint mii_parse_cis8201(uint mii_reg, struct tsec_private * priv)
{
uint speed;
@@ -674,7 +676,7 @@ uint mii_parse_cis8201(uint mii_reg, struct tsec_private * priv)
/* Parse the vsc8244's status register for speed and duplex
* information
*/
-uint mii_parse_vsc8244(uint mii_reg, struct tsec_private * priv)
+static uint mii_parse_vsc8244(uint mii_reg, struct tsec_private * priv)
{
uint speed;
@@ -702,7 +704,7 @@ uint mii_parse_vsc8244(uint mii_reg, struct tsec_private * priv)
/* Parse the DM9161's status register for speed and duplex
* information
*/
-uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private * priv)
+static uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private * priv)
{
if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_100H))
priv->speed = 100;
@@ -720,7 +722,7 @@ uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private * priv)
/*
* Hack to write all 4 PHYs with the LED values
*/
-uint mii_cis8204_fixled(uint mii_reg, struct tsec_private * priv)
+static uint mii_cis8204_fixled(uint mii_reg, struct tsec_private * priv)
{
uint phyid;
volatile tsec_mdio_t *regbase = priv->phyregs;
@@ -738,7 +740,7 @@ uint mii_cis8204_fixled(uint mii_reg, struct tsec_private * priv)
return MIIM_CIS8204_SLEDCON_INIT;
}
-uint mii_cis8204_setmode(uint mii_reg, struct tsec_private * priv)
+static uint mii_cis8204_setmode(uint mii_reg, struct tsec_private * priv)
{
if (priv->flags & TSEC_REDUCED)
return MIIM_CIS8204_EPHYCON_INIT | MIIM_CIS8204_EPHYCON_RGMII;
@@ -746,7 +748,7 @@ uint mii_cis8204_setmode(uint mii_reg, struct tsec_private * priv)
return MIIM_CIS8204_EPHYCON_INIT;
}
-uint mii_m88e1111s_setmode(uint mii_reg, struct tsec_private *priv)
+static uint mii_m88e1111s_setmode(uint mii_reg, struct tsec_private *priv)
{
uint mii_data = read_phy_reg(priv, mii_reg);
@@ -987,7 +989,7 @@ static void tsec_halt(struct eth_device *dev)
phy_run_commands(priv, priv->phyinfo->shutdown);
}
-struct phy_info phy_info_M88E1149S = {
+static struct phy_info phy_info_M88E1149S = {
0x1410ca,
"Marvell 88E1149S",
4,
@@ -1021,7 +1023,7 @@ struct phy_info phy_info_M88E1149S = {
};
/* The 5411 id is 0x206070, the 5421 is 0x2060e0 */
-struct phy_info phy_info_BCM5461S = {
+static struct phy_info phy_info_BCM5461S = {
0x02060c1, /* 5461 ID */
"Broadcom BCM5461S",
0, /* not clear to me what minor revisions we can shift away */
@@ -1048,7 +1050,7 @@ struct phy_info phy_info_BCM5461S = {
},
};
-struct phy_info phy_info_BCM5464S = {
+static struct phy_info phy_info_BCM5464S = {
0x02060b1, /* 5464 ID */
"Broadcom BCM5464S",
0, /* not clear to me what minor revisions we can shift away */
@@ -1075,7 +1077,7 @@ struct phy_info phy_info_BCM5464S = {
},
};
-struct phy_info phy_info_BCM5482S = {
+static struct phy_info phy_info_BCM5482S = {
0x0143bcb,
"Broadcom BCM5482S",
4,
@@ -1103,7 +1105,7 @@ struct phy_info phy_info_BCM5482S = {
},
};
-struct phy_info phy_info_M88E1011S = {
+static struct phy_info phy_info_M88E1011S = {
0x01410c6,
"Marvell 88E1011S",
4,
@@ -1136,7 +1138,7 @@ struct phy_info phy_info_M88E1011S = {
},
};
-struct phy_info phy_info_M88E1111S = {
+static struct phy_info phy_info_M88E1111S = {
0x01410cc,
"Marvell 88E1111S",
4,
@@ -1166,7 +1168,7 @@ struct phy_info phy_info_M88E1111S = {
},
};
-struct phy_info phy_info_M88E1118 = {
+static struct phy_info phy_info_M88E1118 = {
0x01410e1,
"Marvell 88E1118",
4,
@@ -1204,7 +1206,7 @@ struct phy_info phy_info_M88E1118 = {
* Since to access LED register we need do switch the page, we
* do LED configuring in the miim_read-like function as follows
*/
-uint mii_88E1121_set_led (uint mii_reg, struct tsec_private *priv)
+static uint mii_88E1121_set_led (uint mii_reg, struct tsec_private *priv)
{
uint pg;
@@ -1221,7 +1223,7 @@ uint mii_88E1121_set_led (uint mii_reg, struct tsec_private *priv)
return 0;
}
-struct phy_info phy_info_M88E1121R = {
+static struct phy_info phy_info_M88E1121R = {
0x01410cb,
"Marvell 88E1121R",
4,
@@ -1304,7 +1306,7 @@ static struct phy_info phy_info_M88E1145 = {
},
};
-struct phy_info phy_info_cis8204 = {
+static struct phy_info phy_info_cis8204 = {
0x3f11,
"Cicada Cis8204",
6,
@@ -1336,7 +1338,7 @@ struct phy_info phy_info_cis8204 = {
};
/* Cicada 8201 */
-struct phy_info phy_info_cis8201 = {
+static struct phy_info phy_info_cis8201 = {
0xfc41,
"CIS8201",
4,
@@ -1365,7 +1367,8 @@ struct phy_info phy_info_cis8201 = {
{miim_end,}
},
};
-struct phy_info phy_info_VSC8211 = {
+
+static struct phy_info phy_info_VSC8211 = {
0xfc4b,
"Vitesse VSC8211",
4,
@@ -1394,7 +1397,8 @@ struct phy_info phy_info_VSC8211 = {
{miim_end,}
},
};
-struct phy_info phy_info_VSC8244 = {
+
+static struct phy_info phy_info_VSC8244 = {
0x3f1b,
"Vitesse VSC8244",
6,
@@ -1419,7 +1423,7 @@ struct phy_info phy_info_VSC8244 = {
},
};
-struct phy_info phy_info_VSC8641 = {
+static struct phy_info phy_info_VSC8641 = {
0x7043,
"Vitesse VSC8641",
4,
@@ -1443,7 +1447,7 @@ struct phy_info phy_info_VSC8641 = {
},
};
-struct phy_info phy_info_VSC8221 = {
+static struct phy_info phy_info_VSC8221 = {
0xfc55,
"Vitesse VSC8221",
4,
@@ -1467,7 +1471,7 @@ struct phy_info phy_info_VSC8221 = {
},
};
-struct phy_info phy_info_VSC8601 = {
+static struct phy_info phy_info_VSC8601 = {
0x00007042,
"Vitesse VSC8601",
4,
@@ -1504,7 +1508,7 @@ struct phy_info phy_info_VSC8601 = {
};
-struct phy_info phy_info_dm9161 = {
+static struct phy_info phy_info_dm9161 = {
0x0181b88,
"Davicom DM9161E",
4,
@@ -1536,7 +1540,7 @@ struct phy_info phy_info_dm9161 = {
},
};
/* a generic flavor. */
-struct phy_info phy_info_generic = {
+static struct phy_info phy_info_generic = {
0,
"Unknown/Generic PHY",
32,
@@ -1557,7 +1561,7 @@ struct phy_info phy_info_generic = {
};
-uint mii_parse_lxt971_sr2(uint mii_reg, struct tsec_private *priv)
+static uint mii_parse_lxt971_sr2(uint mii_reg, struct tsec_private *priv)
{
unsigned int speed;
if (priv->link) {
@@ -1611,7 +1615,7 @@ static struct phy_info phy_info_lxt971 = {
/* Parse the DP83865's link and auto-neg status register for speed and duplex
* information
*/
-uint mii_parse_dp83865_lanr(uint mii_reg, struct tsec_private *priv)
+static uint mii_parse_dp83865_lanr(uint mii_reg, struct tsec_private *priv)
{
switch (mii_reg & MIIM_DP83865_SPD_MASK) {
@@ -1637,7 +1641,7 @@ uint mii_parse_dp83865_lanr(uint mii_reg, struct tsec_private *priv)
return 0;
}
-struct phy_info phy_info_dp83865 = {
+static struct phy_info phy_info_dp83865 = {
0x20005c7,
"NatSemi DP83865",
4,
@@ -1660,7 +1664,7 @@ struct phy_info phy_info_dp83865 = {
},
};
-struct phy_info phy_info_rtl8211b = {
+static struct phy_info phy_info_rtl8211b = {
0x001cc91,
"RealTek RTL8211B",
4,
@@ -1687,7 +1691,7 @@ struct phy_info phy_info_rtl8211b = {
},
};
-struct phy_info *phy_info[] = {
+static struct phy_info *phy_info[] = {
&phy_info_cis8204,
&phy_info_cis8201,
&phy_info_BCM5461S,
@@ -1716,7 +1720,7 @@ struct phy_info *phy_info[] = {
* all of the known PHYs to see if one matches. If so, return
* it, if not, return NULL
*/
-struct phy_info *get_phy_info(struct eth_device *dev)
+static struct phy_info *get_phy_info(struct eth_device *dev)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
uint phy_reg, phy_ID;
@@ -1752,7 +1756,7 @@ struct phy_info *get_phy_info(struct eth_device *dev)
/* Execute the given series of commands on the given device's
* PHY, running functions as necessary
*/
-void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd)
+static void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd)
{
int i;
uint result;
diff --git a/include/tsec.h b/include/tsec.h
index f56723a..29e4c56 100644
--- a/include/tsec.h
+++ b/include/tsec.h
@@ -644,7 +644,6 @@ struct tsec_info_struct {
u32 flags;
};
-int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info);
int tsec_standard_init(bd_t *bis);
int tsec_eth_init(bd_t *bis, struct tsec_info_struct *tsec_info, int num);
--
1.6.2.1
More information about the U-Boot
mailing list