[U-Boot] [STATUS] v2009.11-rc1 is out

[rhabarber1848]

Am Wed, 28 Oct 2009 14:42:10 +0100 schrieb Wolfgang Denk:

> just in case you did not notice yet: U-Boot v2009.11-rc1 was released
> last night.

Hi,

I just tested it on my Dbox2 board where U-Boot 2009.08 is working 
perfectly well with unchanged config.
But now U-Boot raises an exception during machine check:

=============================================================================
U-Boot 2009.11 (Tuxbox) (Nov 03 2009 - 08:59:24)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  64 MB
Top of RAM usable for U-Boot at: 04000000
Reserving 201k for U-Boot at: 03fcd000
Reserving 144k for malloc() at: 03fa9000
Reserving 60 Bytes for Board Info at: 03fa8fc4
Reserving 52 Bytes for Global Data at: 03fa8f90
Stack Pointer at: 03fa8f78
New Stack Pointer is: 03fa8f78
Now running in RAM - U-Boot at: 03fcd000
FLASH:  8 MB
FB:    ready
Bus Fault @ 0x03fcfe0c, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 03fa8d88 Unknown values in msr
NIP: 03FCFE0C XER: 8000007F LR: 03FCFD98 REGS: 03fa8d88 TRAP: 0200 DAR: 3038B700
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: 30323030 03FA8E78 03FA8F90 00000008 30323030 30376666 00000000 000686CC
GPR08: 03FF56CC 3038B6FC 00000002 000F423F FF002848 00031CBC 03FFB600 03F8D000
GPR16: 00000000 00000000 00000000 00000000 20004000 00000001 60634001 90640170
GPR24: 03FA8F90 00000040 03FCD000 00000000 0006868C 00000001 03FFB678 03FCD000
Call backtrace:
machine check
=============================================================================

The remaining boot messages would be:

In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
LCD:   ready

Any pointers where I could start debugging?

Cheers, rhabarber1848