[U-Boot] [PATCHi v3] OMAP3: add CM-T35 board

[Mike Rapoport]

Paulraj, Sandeep wrote:
> 
>> Add CM-T35 board support
>>
>> Signed-off-by: Mike Rapoport <mike at compulab.co.il>
>>
>> --
>> v2 changes:
>> - rename board config file from omap3_cm-t35.h to cm-t35.h
>> - remove SZ_xx references
>> - add MAKEALL/MAINTEINERS entries
>>
>> v3 changes:
>> - fix whitespace and indentation
>> - remove eth_init from board_eth_init
>> - add CM-T35 entry to doc/README.omap3
>> - fixed board name in MAINTAINERS
>>
>> ---
>>  MAINTAINERS              |    4 +
>>  MAKEALL                  |    1 +
>>  Makefile                 |    2 +
>>  board/cm-t35/Makefile    |   47 ++++++++
>>  board/cm-t35/cm-t35.c    |  190 +++++++++++++++++++++++++++++
>>  board/cm-t35/cm-t35.h    |  173 +++++++++++++++++++++++++++
>>  board/cm-t35/config.mk   |   30 +++++
>>  doc/README.omap3         |   16 ++-
>>  include/configs/cm-t35.h |  296
>> ++++++++++++++++++++++++++++++++++++++++++++++
>>  9 files changed, 757 insertions(+), 2 deletions(-)
>>  create mode 100644 board/cm-t35/Makefile
>>  create mode 100644 board/cm-t35/cm-t35.c
>>  create mode 100644 board/cm-t35/cm-t35.h
>>  create mode 100644 board/cm-t35/config.mk
>>  create mode 100644 include/configs/cm-t35.h
> 
> Was this patch made against the current u-boot-ti/next.
> 
> The reason I say this is because there was a DDR patch that affects all OMAP3 boards. So this support should be added against u-boot-ti/next and tested against it. I believe there is a config option to choose between MICRON and INFINEON DDR's.
> 

Rebasing, thanks.


> 

-- 
Sincerely yours,
Mike.