[U-Boot] [PATCH 1/1] ARM Add New Board GEC2410 v2
Hui.Tang
zetalabs at gmail.com
Thu Nov 5 13:17:36 CET 2009
Signed-off-by: Hui.Tang <zetalabs at gmail.com>
---
total: 0 errors, 0 warnings, 1249 lines checked
0001-ARM-Add-New-Board-GEC2410.patch has no obvious style problems and is ready for submission.
MAINTAINERS | 4 +
MAKEALL | 1 +
Makefile | 7 +
board/gec/gec2410/Makefile | 54 ++++++
board/gec/gec2410/README | 85 +++++++++
board/gec/gec2410/config.mk | 34 ++++
board/gec/gec2410/gec2410.c | 313 +++++++++++++++++++++++++++++++++
board/gec/gec2410/gec2410_mem.h | 118 +++++++++++++
board/gec/gec2410/lowlevel_init.S | 93 ++++++++++
board/gec/gec2410/u-boot-nand.lds | 61 +++++++
cpu/arm920t/s3c24x0/timer.c | 3 +-
include/configs/gec2410.h | 249 ++++++++++++++++++++++++++
nand_spl/board/gec/gec2410/Makefile | 103 +++++++++++
nand_spl/board/gec/gec2410/config.mk | 40 +++++
nand_spl/board/gec/gec2410/u-boot.lds | 60 +++++++
15 files changed, 1224 insertions(+), 1 deletions(-)
create mode 100644 board/gec/gec2410/Makefile
create mode 100644 board/gec/gec2410/README
create mode 100644 board/gec/gec2410/config.mk
create mode 100644 board/gec/gec2410/gec2410.c
create mode 100644 board/gec/gec2410/gec2410_mem.h
create mode 100644 board/gec/gec2410/lowlevel_init.S
create mode 100644 board/gec/gec2410/u-boot-nand.lds
create mode 100644 include/configs/gec2410.h
create mode 100644 nand_spl/board/gec/gec2410/Makefile
create mode 100644 nand_spl/board/gec/gec2410/config.mk
create mode 100644 nand_spl/board/gec/gec2410/u-boot.lds
diff --git a/MAINTAINERS b/MAINTAINERS
index d70a9d2..6ecba41 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -429,6 +429,10 @@ Timur Tabi <timur at freescale.com>
MPC8349E-mITX MPC8349
MPC8349E-mITX-GP MPC8349
+Hui Tang <zetalabs at gmail.com>
+
+ gec2410 ARM920T
+
Erik Theisen <etheisen at mindspring.com>
W7OLMC PPC4xx
diff --git a/MAKEALL b/MAKEALL
index d63c5c2..fffa58a 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -548,6 +548,7 @@ LIST_ARM9=" \
cp926ejs \
cp946es \
cp966 \
+ gec2410 \
imx27lite \
lpd7a400 \
mv88f6281gtw_ge \
diff --git a/Makefile b/Makefile
index bcb3fe9..2de0b1d 100644
--- a/Makefile
+++ b/Makefile
@@ -2951,6 +2951,13 @@ davinci_dm365evm_config : unconfig
davinci_dm6467evm_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
+gec2410_config : unconfig
+ @mkdir -p $(obj)include $(obj)board/gec/gec2410
+ @mkdir -p $(obj)nand_spl/board/gec/gec2410
+ @echo "RAM_TEXT = 0x33e00000" >> $(obj)board/gec/gec2410/config.tmp
+ @$(MKCONFIG) $(@:_config=) arm arm920t gec2410 gec s3c24x0
+ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
imx27lite_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
diff --git a/board/gec/gec2410/Makefile b/board/gec/gec2410/Makefile
new file mode 100644
index 0000000..052f600
--- /dev/null
+++ b/board/gec/gec2410/Makefile
@@ -0,0 +1,54 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# (C) Copyright 2009
+# Hui Tang <zetalabs at gmail.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := gec2410.o
+SOBJS := lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/gec/gec2410/README b/board/gec/gec2410/README
new file mode 100644
index 0000000..952aae8
--- /dev/null
+++ b/board/gec/gec2410/README
@@ -0,0 +1,85 @@
+U-Boot for GEC2410
+
+------------------------------------------------
+The supported features of the GEC2410 board are:
+ CPU (Samsung S3C2410 SoC)
+ SDRAM (64 MB , 2 pcs K4S561632, 32 bit)
+ NAND FLASH (64MB , 1 pcs K9F1208)
+ NOR FLASH (only on rev1.1 board, 2MB , 1 pcs SST39VF1601)
+ ETHERNET (10M , 1 pcs CS8900)
+
+
+------------------------------------------------
+Memory Map from CPU point of view:
+
+for NAND FLASH boot:
+ Start Size Access to
+ -----------------------------------------------------
+ 0x00000000 64MB NAND FLASH (first 4K SRAM for stepptingstone)
+ 0x19000300 CS8900 I/O base
+ 0x30000000 64MB SDRAM
+ 0x48000000 128MB Special Function Registers Area
+
+
+for NOR FLASH boot:
+ Start Size Access to
+ -----------------------------------------------------
+ 0x00000000 2MB NOR FLASH
+ 0x19000300 CS8900 I/O base
+ 0x30000000 64MB SDRAM
+ 0x40000000 4KB BootSRAM
+ 0x48000000 128MB Special Function Registers Area
+
+
+------------------------------------------------
+Setting the board Jumpers & Switches:
+
+ In order to get the board running with the default configuration the
+ jumpers need to be set as follows:
+
+ Core board Jumpers:
+ JP1 close (Set boot mode, close for booting from NAND FLASH,
+ otherwise from NOR FLASH)
+
+ Main board Jumpers:
+ J1 close (Set beep, close for enabling beep, or disabling beep)
+ J18 1-2 (1-2 set RXD2 as UART; 2-3 set RXD2 as IrDA)
+ J9,J10 2-3 (1-2 set USB HOST 1 to Host mode;
+ 2-3 set USB HOST 1 to Device mode)
+ J13 1-2 (1-2 set LCD working power to 5V;
+ 2-3 set LCD working power to 3.3V)
+
+ Core board Switches:
+ S1 open (Reset button)
+
+ Main board Switches:
+ K1~K16 open (4x4 keyboard)
+
+
+------------------------------------------------
+LED & Connector Interfaces:
+
+ Core board LEDs:
+ D1,D2 I/O port
+ D3 PWREN pin LED
+ D4 Core board power
+
+ Main board LEDs:
+ D1~D4 GPIO
+ D5,D6 Ethernet
+ D11 Main board power
+
+ Core board Connector Interfaces:
+ J1 JTAG (20 pins)
+
+ Main board Connector Interfaces:
+ RJ1 Ethernet (RJ45)
+ J2 Audio In
+ J3 Audio Out
+ J4 Serial Port 1
+ J5 Serial Port 2
+ U4 IrDA Port
+ J7 USB HOST 0
+ J9 USB HOST 1 / USB DEVICE
+ J11 USB DEVICE
+ J20 GPIO Pins
diff --git a/board/gec/gec2410/config.mk b/board/gec/gec2410/config.mk
new file mode 100644
index 0000000..f32ee2e
--- /dev/null
+++ b/board/gec/gec2410/config.mk
@@ -0,0 +1,34 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <garyj at denx.de>
+# David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
+#
+# GuangDong Embedded Software Center GEC2410 board with S3C2410X (ARM920T) cpu
+#
+# see http://www.gd-emb.com/sales_detail/menu-2410.html for more information on GEC2410
+#
+
+#
+# GEC2410 has 1 bank of 64 MB DRAM
+#
+# 3000'0000 to 3400'0000
+#
+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
+# optionally with a ramdisk at 3080'0000
+#
+# we load ourself to 33e0'0000
+#
+# download area is 3300'c000
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef CONFIG_NAND_SPL
+TEXT_BASE = $(RAM_TEXT)
+else
+TEXT_BASE = 0
+endif
+
+LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot-nand.lds
+
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/gec/gec2410
diff --git a/board/gec/gec2410/gec2410.c b/board/gec/gec2410/gec2410.c
new file mode 100644
index 0000000..1f941ad
--- /dev/null
+++ b/board/gec/gec2410/gec2410.c
@@ -0,0 +1,313 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger at sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
+ *
+ * (C) Copyright 2009
+ * Hui Tang, <zetalabs at gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/arch/s3c2410.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define FCLK_SPEED 1
+
+#if FCLK_SPEED == 0 /* Fout = 203MHz, Fin = 12MHz for Audio */
+#define M_MDIV 0xC3
+#define M_PDIV 0x4
+#define M_SDIV 0x1
+#elif FCLK_SPEED == 1 /* Fout = 202.8MHz */
+#define M_MDIV 0xA1
+#define M_PDIV 0x3
+#define M_SDIV 0x1
+#endif
+
+#define USB_CLOCK 1
+
+#if USB_CLOCK == 0
+#define U_M_MDIV 0xA1
+#define U_M_PDIV 0x3
+#define U_M_SDIV 0x1
+#elif USB_CLOCK == 1
+#define U_M_MDIV 0x48
+#define U_M_PDIV 0x3
+#define U_M_SDIV 0x2
+#endif
+
+static inline void delay(unsigned long loops)
+{
+ __asm__ volatile ("1:\n"
+ "subs %0, %1, #1\n"
+ "bne 1b" : "=r" (loops) : "0" (loops));
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init(void)
+{
+ struct s3c24x0_clock_power * const clk_power =
+ s3c24x0_get_base_clock_power();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+
+ /* to reduce PLL lock time, adjust the LOCKTIME register */
+ writel(0xFFFFFF, &clk_power->LOCKTIME);
+
+ /* configure MPLL */
+ writel(((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV), &clk_power->MPLLCON);
+
+ /* some delay between MPLL and UPLL */
+ delay(4000);
+
+ /* configure UPLL */
+ writel(((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV),
+ &clk_power->UPLLCON);
+
+ /* some delay between MPLL and UPLL */
+ delay(8000);
+
+ /* set up the I/O ports */
+ /* configure GPA port */
+ /*====================================*
+ * PIN FUNCTION VALUE *
+ *====================================*
+ * GPA22 nFCE 1
+ * GPA21 nRSTOUT 1
+ * GPA20 nFRE 1
+ * GPA19 nFWE 1
+ * GPA18 ALE 1
+ * GPA17 CLE 1
+ * GPA16 nGCS5 1
+ * GPA15 nGCS4 1
+ * GPA14 nGCS3 1
+ * GPA13 nGCS2 1
+ * GPA12 nGCS1 1
+ * GPA11 ADDR26 1
+ * GPA10 ADDR25 1
+ * GPA9 ADDR24 1
+ * GPA8 ADDR23 1
+ * GPA7 ADDR22 1
+ * GPA6 ADDR21 1
+ * GPA5 ADDR20 1
+ * GPA4 ADDR19 1
+ * GPA3 ADDR18 1
+ * GPA2 ADDR17 1
+ * GPA1 ADDR16 1
+ * GPA0 ADDR0 1
+ *====================================*/
+ writel(0x007FFFFF, &gpio->GPACON);
+
+ /* configure GPB port */
+ /*====================================*
+ * PIN FUNCTION VALUE *
+ *====================================*
+ * GPB10 Input 00
+ * GPB9 Output 01
+ * GPB8 Input 00
+ * GPB7 Output 01
+ * GPB6 Input 00
+ * GPB5 Output 01
+ * GPB4 Output 01
+ * GPB3 Output 01
+ * GPB2 Output 01
+ * GPB1 Output 01
+ * GPB0 Output 01
+ *====================================*/
+ writel(0x00044555, &gpio->GPBCON);
+ /* disable all pull-up register */
+ writel(0x000007FF, &gpio->GPBUP);
+
+ /* configure GPC port */
+ /*====================================*
+ * PIN FUNCTION VALUE *
+ *====================================*
+ * GPC15 VD7 10
+ * GPC14 VD6 10
+ * GPC13 VD5 10
+ * GPC12 VD4 10
+ * GPC11 VD3 10
+ * GPC10 VD2 10
+ * GPC9 VD1 10
+ * GPC8 VD0 10
+ * GPC7 LCDVF2 10
+ * GPC6 LCDVF1 10
+ * GPC5 LCDVF0 10
+ * GPC4 VM 10
+ * GPC3 VFRAME 10
+ * GPC2 VLINE 10
+ * GPC1 VCLK 10
+ * GPC0 LEND 10
+ *====================================*/
+ writel(0xAAAAAAAA, &gpio->GPCCON);
+ /* disable all pull-up register */
+ writel(0x0000FFFF, &gpio->GPCUP);
+
+ /* configure GPD port */
+ /*====================================*
+ * PIN FUNCTION VALUE *
+ *====================================*
+ * GPD15 VD23 10
+ * GPD14 VD22 10
+ * GPD13 VD21 10
+ * GPD12 VD20 10
+ * GPD11 VD19 10
+ * GPD10 VD18 10
+ * GPD9 VD17 10
+ * GPD8 VD16 10
+ * GPD7 VD15 10
+ * GPD6 VD14 10
+ * GPD5 VD13 10
+ * GPD4 VD12 10
+ * GPD3 VD11 10
+ * GPD2 VD10 10
+ * GPD1 VD9 10
+ * GPD0 VD8 10
+ *====================================*/
+ writel(0xAAAAAAAA, &gpio->GPDCON);
+ /* disable all pull-up register */
+ writel(0x0000FFFF, &gpio->GPDUP);
+
+ /* configure GPE port */
+ /*====================================*
+ * PIN FUNCTION VALUE *
+ *====================================*
+ * GPE15 IICSDA 10
+ * GPE14 IICSCL 10
+ * GPE13 SPICLK0 10
+ * GPE12 SPIMOSIO 10
+ * GPE11 SPIMISOO 10
+ * GPE10 SDDAT3 10
+ * GPE9 SDDAT2 10
+ * GPE8 SDDAT1 10
+ * GPE7 SDDAT0 10
+ * GPE6 SDCMD 10
+ * GPE5 SDCLK 10
+ * GPE4 I2SSDO 10
+ * GPE3 I2SSDI 10
+ * GPE2 CDCLK 10
+ * GPE1 I2SSCLK 10
+ * GPE0 I2SLRCK 10
+ *====================================*/
+ writel(0xAAAAAAAA, &gpio->GPECON);
+ /* disable all pull-up register */
+ writel(0x0000FFFF, &gpio->GPEUP);
+
+ /* configure GPF port */
+ /*====================================*
+ * PIN FUNCTION VALUE *
+ *====================================*
+ * GPF7 Output 01
+ * GPF6 Output 01
+ * GPF5 Output 01
+ * GPF4 Output 01
+ * GPF3 EINT3 10
+ * GPF2 EINT2 10
+ * GPF1 EINT1 10
+ * GPF0 EINT0 10
+ *====================================*/
+ writel(0x000055AA, &gpio->GPFCON);
+ /* disable all pull-up register */
+ writel(0x000000FF, &gpio->GPFUP);
+
+ /* configure GPG port */
+ /*====================================*
+ * PIN FUNCTION VALUE *
+ *====================================*
+ * GPG15 nYPON 11
+ * GPG14 YMON 11
+ * GPG13 nXPON 11
+ * GPG12 XMON 11
+ * GPG11 EINT19 10
+ * GPG10 Output 01
+ * GPG9 Output 01
+ * GPG8 Output 01
+ * GPG7 SPICLK1 11
+ * GPG6 SPIMOSI1 11
+ * GPG5 SPIMISO1 11
+ * GPG4 LCD_PWREN 11
+ * GPG3 EINT11 10
+ * GPG2 nSS0 11
+ * GPG1 EINT9 10
+ * GPG0 EINT8 10
+ *====================================*/
+ writel(0xFF95FFBA, &gpio->GPGCON);
+ /* disable all pull-up register */
+ writel(0x0000FFFF, &gpio->GPGUP);
+
+ /* configure GPH port */
+ /*====================================*
+ * PIN FUNCTION VALUE *
+ *====================================*
+ * GPH10 CLKOUT1 10
+ * GPH9 CLKOUT0 10
+ * GPH8 UEXTCLK 10
+ * GPH7 nCTS1 11
+ * GPH6 nRTS1 11
+ * GPH5 RXD1 10
+ * GPH4 TXD1 10
+ * GPH3 RXD0 10
+ * GPH2 TXD0 10
+ * GPH1 nRTS0 10
+ * GPH0 nCTS0 10
+ *====================================*/
+ writel(0x002AFAAA, &gpio->GPHCON);
+ /* disable all pull-up register */
+ writel(0x000007FF, &gpio->GPHUP);
+
+ /* arch number of GEC2410-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_GEC2410;
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ icache_enable();
+ dcache_enable();
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
+ PHYS_SDRAM_1_SIZE);
+
+ return 0;
+}
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_CS8900
+ rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
+#endif
+ return rc;
+}
+#endif
diff --git a/board/gec/gec2410/gec2410_mem.h b/board/gec/gec2410/gec2410_mem.h
new file mode 100644
index 0000000..93f820b
--- /dev/null
+++ b/board/gec/gec2410/gec2410_mem.h
@@ -0,0 +1,118 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
+ * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
+ *
+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
+ *
+ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar at sec.samsung.com>
+ *
+ * Modified for the Samsung SMDK2410 by
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
+ *
+ * Copyright (C) 2009 Hui Tang <zetalabs at gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define BWSCON 0x48000000
+
+/* BWSCON */
+#define DW8 (0x0)
+#define DW16 (0x1)
+#define DW32 (0x2)
+#define WAIT (0x1<<2)
+#define UBLB (0x1<<3)
+
+#define B1_BWSCON (DW32)
+#define B2_BWSCON (DW16)
+#define B3_BWSCON (DW16 + WAIT + UBLB)
+#define B4_BWSCON (DW16)
+#define B5_BWSCON (DW16)
+#define B6_BWSCON (DW32)
+#define B7_BWSCON (DW32)
+
+/* BANK0CON */
+#define B0_Tacs 0x0 /* 0clk */
+#define B0_Tcos 0x0 /* 0clk */
+#define B0_Tacc 0x7 /* 14clk */
+#define B0_Tcoh 0x0 /* 0clk */
+#define B0_Tah 0x0 /* 0clk */
+#define B0_Tacp 0x0
+#define B0_PMC 0x0 /* normal */
+
+/* BANK1CON */
+#define B1_Tacs 0x0 /* 0clk */
+#define B1_Tcos 0x0 /* 0clk */
+#define B1_Tacc 0x7 /* 14clk */
+#define B1_Tcoh 0x0 /* 0clk */
+#define B1_Tah 0x0 /* 0clk */
+#define B1_Tacp 0x0
+#define B1_PMC 0x0
+
+#define B2_Tacs 0x0
+#define B2_Tcos 0x0
+#define B2_Tacc 0x7
+#define B2_Tcoh 0x0
+#define B2_Tah 0x0
+#define B2_Tacp 0x0
+#define B2_PMC 0x0
+
+#define B3_Tacs 0x0 /* 0clk */
+#define B3_Tcos 0x3 /* 4clk */
+#define B3_Tacc 0x7 /* 14clk */
+#define B3_Tcoh 0x1 /* 1clk */
+#define B3_Tah 0x0 /* 0clk */
+#define B3_Tacp 0x3 /* 6clk */
+#define B3_PMC 0x0 /* normal */
+
+#define B4_Tacs 0x0 /* 0clk */
+#define B4_Tcos 0x0 /* 0clk */
+#define B4_Tacc 0x7 /* 14clk */
+#define B4_Tcoh 0x0 /* 0clk */
+#define B4_Tah 0x0 /* 0clk */
+#define B4_Tacp 0x0
+#define B4_PMC 0x0 /* normal */
+
+#define B5_Tacs 0x0 /* 0clk */
+#define B5_Tcos 0x0 /* 0clk */
+#define B5_Tacc 0x7 /* 14clk */
+#define B5_Tcoh 0x0 /* 0clk */
+#define B5_Tah 0x0 /* 0clk */
+#define B5_Tacp 0x0
+#define B5_PMC 0x0 /* normal */
+
+#define B6_MT 0x3 /* SDRAM */
+#define B6_Trcd 0x1
+#define B6_SCAN 0x1 /* 9bit */
+
+#define B7_MT 0x3 /* SDRAM */
+#define B7_Trcd 0x1 /* 3clk */
+#define B7_SCAN 0x1 /* 9bit */
+
+/* REFRESH parameter */
+#define REFEN 0x1 /* Refresh enable */
+#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
+#define Trp 0x0 /* 2clk */
+#define Trc 0x3 /* 7clk */
+#define Tchr 0x2 /* 3clk */
+#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
+/**************************************/
diff --git a/board/gec/gec2410/lowlevel_init.S b/board/gec/gec2410/lowlevel_init.S
new file mode 100644
index 0000000..215aaad
--- /dev/null
+++ b/board/gec/gec2410/lowlevel_init.S
@@ -0,0 +1,93 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
+ * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
+ *
+ * Modified for the Samsung SMDK2410 by
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
+ *
+ * Copyright (C) 2009 Hui Tang <zetalabs at gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include "gec2410_mem.h"
+
+_TEXT_BASE:
+ .word TEXT_BASE
+
+.globl lowlevel_init
+lowlevel_init:
+#if defined(CONFIG_NAND_SPL) || !defined(CONFIG_BOOT_NAND)
+ /* memory control configuration */
+ /* make r0 relative the current location so that it */
+ /* reads SMRDATA out of FLASH rather than memory ! */
+ ldr r0, =SMRDATA
+ ldr r1, _TEXT_BASE
+ sub r0, r0, r1
+ ldr r1, =BWSCON /* Bus Width Status Controller */
+ add r2, r0, #13*4
+0:
+ ldr r3, [r0], #4
+ str r3, [r1], #4
+ cmp r2, r0
+ bne 0b
+#endif /* CONFIG_NAND_SPL */
+
+ /* everything is fine now */
+ mov pc, lr
+
+/* dummy function, called by start_code() in cpu/arm920t/start.S */
+.globl coloured_LED_init
+coloured_LED_init:
+ mov pc, lr
+
+/* dummy function, called by start_code() in cpu/arm920t/start.S */
+.globl red_LED_on
+red_LED_on:
+ mov pc, lr
+
+ .ltorg
+/* the literal pools origin */
+
+SMRDATA:
+ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12) \
+ +(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
+ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8) \
+ +(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
+ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8) \
+ +(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
+ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8) \
+ +(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
+ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8) \
+ +(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
+ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8) \
+ +(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
+ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8) \
+ +(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
+ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
+ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
+ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
+ .word 0x32
+ .word 0x30
+ .word 0x30
diff --git a/board/gec/gec2410/u-boot-nand.lds b/board/gec/gec2410/u-boot-nand.lds
new file mode 100644
index 0000000..a30ece3
--- /dev/null
+++ b/board/gec/gec2410/u-boot-nand.lds
@@ -0,0 +1,61 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj at denx.de>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg at denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm920t/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .mmudata : { *(.mmudata) }
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) . = ALIGN(4); }
+ _end = .;
+}
diff --git a/cpu/arm920t/s3c24x0/timer.c b/cpu/arm920t/s3c24x0/timer.c
index 20cedd4..d463a03 100644
--- a/cpu/arm920t/s3c24x0/timer.c
+++ b/cpu/arm920t/s3c24x0/timer.c
@@ -188,7 +188,8 @@ ulong get_tbclk(void)
tbclk = timer_load_val * 100;
#elif defined(CONFIG_SBC2410X) || \
defined(CONFIG_SMDK2410) || \
- defined(CONFIG_VCMA9)
+ defined(CONFIG_VCMA9) || \
+ defined(CONFIG_GEC2410)
tbclk = CONFIG_SYS_HZ;
#else
# error "tbclk not configured"
diff --git a/include/configs/gec2410.h b/include/configs/gec2410.h
new file mode 100644
index 0000000..a5c1b73
--- /dev/null
+++ b/include/configs/gec2410.h
@@ -0,0 +1,249 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger at sysgo.de>
+ * Gary Jennejohn <garyj at denx.de>
+ * David Mueller <d.mueller at elsoft.ch>
+ *
+ * Configuation settings for the GD-Embedded Software Center GEC2410 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
+#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */
+#define CONFIG_GEC2410 1 /* on a GEC2410 Board */
+
+#define CONFIG_SYS_SDRAM_BASE 0x30000000
+
+/* input clock of PLL */
+#define CONFIG_SYS_CLK_FREQ 12000000 /* the GEC2410 has 12MHz input clock */
+
+#if !defined(CONFIG_NAND_SPL) && (TEXT_BASE >= 0xc0000000)
+#define CONFIG_ENABLE_MMU
+#endif
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+
+#define USE_920T_MMU 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_NET_MULTI
+#define CONFIG_CS8900 /* we have a CS8900 on-board */
+#define CONFIG_CS8900_BASE 0x19000300
+#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_S3C24X0_SERIAL 1
+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on GEC2410 */
+
+/************************************************************
+ * RTC
+ ************************************************************/
+#define CONFIG_RTC_S3C24X0 1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE 115200
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "GEC2410#" /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START \
+ CONFIG_SYS_SDRAM_BASE /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END \
+ (CONFIG_SYS_SDRAM_BASE + 0x3e00000) /* 62 MB in DRAM */
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* default load address */
+#define CONFIG_SYS_HZ 1000
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE 0x40000 /* regular stack 256KB */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
+
+#define CONFIG_SYS_FLASH_BASE 0x00000000
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
+#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
+
+#define CONFIG_SYS_FLASH_CFI 1 /* Use CFI parameters (needed?) */
+#define CONFIG_FLASH_CFI_DRIVER 1
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+
+#define PHYS_FLASH_SIZE 0x00200000 /* 2MB */
+#define CONFIG_ENV_ADDR \
+ (CONFIG_SYS_FLASH_BASE + 0x040000) /* addr of environment */
+
+/* timeout values are in ticks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT \
+ (5 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT \
+ (5 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
+
+#define CONFIG_ENV_SIZE 0x020000 /* Total Size of Environment Parameters */
+
+/*
+ * GEC2410 board specific data
+ */
+#define CONFIG_IDENT_STRING " for GEC2410"
+
+/* base address for uboot */
+#define CONFIG_SYS_PHY_UBOOT_BASE (CONFIG_SYS_SDRAM_BASE + 0x03e00000)
+
+/* total memory available to uboot */
+#define CONFIG_SYS_UBOOT_SIZE (1024 * 1024)
+
+/* Put environment copies after the end of U-Boot owned RAM */
+#define CONFIG_NAND_ENV_DST (CONFIG_SYS_UBOOT_BASE + CONFIG_SYS_UBOOT_SIZE)
+
+#ifdef CONFIG_ENABLE_MMU
+#define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000
+#define CONFIG_BOOTCOMMAND "nand read 0xc0008000 0x60000 0x1a0000;" \
+ "bootm 0xc0008000"
+#else
+#define CONFIG_SYS_MAPPED_RAM_BASE CONFIG_SYS_SDRAM_BASE
+#define CONFIG_BOOTCOMMAND "nand read 0x30008000 0x60000 0x1a0000;" \
+ "bootm 0x30008000"
+#endif
+
+/* NAND U-Boot load and start address */
+#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_MAPPED_RAM_BASE + 0x03e00000)
+#define CONFIG_ENV_OFFSET 0x0040000 /* Offset of Environment Sector */
+
+/* NAND configuration */
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x4e00000c /* R/W NAND Flash data register */
+#define CONFIG_S3C2410_NAND_HWECC
+#define CONFIG_S3C2410_NAND_BBT
+
+/* NUB load-addr */
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_PHY_UBOOT_BASE
+/* NUB start-addr */
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
+
+/* Offset to RAM U-Boot image */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS (4 * 1024)
+/* Size of RAM U-Boot image */
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (252 * 1024)
+
+/* NAND chip page size */
+#define CONFIG_SYS_NAND_PAGE_SIZE 512
+/* NAND chip block size */
+#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024)
+/* NAND chip page per block count */
+#define CONFIG_SYS_NAND_PAGE_COUNT 32
+/* Location of the bad-block label */
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS 5 /* Marks the 6th OOB byte */
+/* Extra address cycle for > 32MiB */
+#define CONFIG_SYS_NAND_4_ADDR_CYCLE 1 /* Fourth addr used (>32MB) */
+
+/* Size of the block protected by one OOB (Spare Area in Samsung terminology) */
+#define CONFIG_SYS_NAND_ECCSIZE CONFIG_SYS_NAND_PAGE_SIZE
+/* Number of ECC bytes per OOB - S3C2410 calculates 4 bytes ECC in 1-bit mode */
+#define CONFIG_SYS_NAND_ECCBYTES 3
+/* Number of ECC-blocks per NAND page */
+#define CONFIG_SYS_NAND_ECCSTEPS \
+ (CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
+/* Size of a single OOB region */
+#define CONFIG_SYS_NAND_OOBSIZE 16
+/* Number of ECC bytes per page */
+#define CONFIG_SYS_NAND_ECCTOTAL \
+ (CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
+/* ECC byte positions */
+#define CONFIG_SYS_NAND_ECCPOS {0, 1, 2}
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
+/* Boot configuration */
+#define CONFIG_BOOT_NAND
+#define CONFIG_NAND
+#define CONFIG_NAND_S3C2410 1
+
+/* Settings as above boot configuration */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_BOOTARGS "console=ttySAC,115200"
+
+#endif /* __CONFIG_H */
diff --git a/nand_spl/board/gec/gec2410/Makefile b/nand_spl/board/gec/gec2410/Makefile
new file mode 100644
index 0000000..ece460d
--- /dev/null
+++ b/nand_spl/board/gec/gec2410/Makefile
@@ -0,0 +1,103 @@
+#
+# (C) Copyright 2006-2007
+# Stefan Roese, DENX Software Engineering, sr at denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg at denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+CONFIG_NAND_SPL = y
+CONFIG_SKIP_RELOCATE_UBOOT = y
+
+include $(TOPDIR)/config.mk
+include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
+
+LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
+LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS += -DCONFIG_NAND_SPL -DCONFIG_SKIP_RELOCATE_UBOOT
+CFLAGS += -DCONFIG_NAND_SPL -DCONFIG_SKIP_RELOCATE_UBOOT
+
+SOBJS = start.o lowlevel_init.o
+COBJS = nand_boot.o s3c2410_nand.o
+
+SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR)
+
+nandobj := $(OBJTREE)/nand_spl/
+
+ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
+
+all: $(obj).depend $(ALL)
+
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
+
+$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
+ -Map $(nandobj)u-boot-spl.map \
+ -o $(nandobj)u-boot-spl
+
+$(nandobj)u-boot.lds: $(LDSCRIPT)
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+
+# create symbolic links for common files
+
+# from cpu directory
+$(obj)start.S:
+ @rm -f $@
+ @ln -s $(TOPDIR)/cpu/arm920t/start.S $@
+
+# from SoC directory
+
+# from board directory
+$(obj)lowlevel_init.S:
+ @rm -f $@
+ @ln -s $(TOPDIR)/board/gec/gec2410/lowlevel_init.S $@
+
+# from nand_spl directory
+$(obj)nand_boot.c:
+ @rm -f $@
+ @ln -s $(TOPDIR)/nand_spl/nand_boot.c $@
+
+# from drivers/mtd/nand directory
+$(obj)s3c2410_nand.c:
+ @rm -f $@
+ @ln -s $(TOPDIR)/drivers/mtd/nand/s3c2410_nand.c $@
+
+#########################################################################
+
+$(obj)%.o: $(obj)%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(obj)%.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/nand_spl/board/gec/gec2410/config.mk b/nand_spl/board/gec/gec2410/config.mk
new file mode 100644
index 0000000..7db7fd1
--- /dev/null
+++ b/nand_spl/board/gec/gec2410/config.mk
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2006
+# Stefan Roese, DENX Software Engineering, sr at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# GEC2410 Study Platform (gec2410) board
+
+# TEXT_BASE for SPL:
+#
+# On S3C2410 platforms the SPL is located in SRAM at 0.
+#
+TEXT_BASE = 0
+
+include $(TOPDIR)/board/$(BOARDDIR)/config.mk
+
+# PAD_TO used to generate a 4kByte binary needed for the combined image
+# -> PAD_TO = TEXT_BASE + 4096
+PAD_TO := 0x00001000
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
diff --git a/nand_spl/board/gec/gec2410/u-boot.lds b/nand_spl/board/gec/gec2410/u-boot.lds
new file mode 100644
index 0000000..5871f7e
--- /dev/null
+++ b/nand_spl/board/gec/gec2410/u-boot.lds
@@ -0,0 +1,60 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj at denx.de>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg at denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ start.o (.text)
+ nand_boot.o (.text)
+
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) . = ALIGN(4); }
+ _end = .;
+}
--
1.6.0.4
More information about the U-Boot
mailing list