[U-Boot] [PATCH 1/1] ARM Add New Board GEC2410 rev2
Minkyu Kang
promsoft at gmail.com
Tue Nov 10 07:16:46 CET 2009
Dear Hui.Tang
2009/11/6 Hui.Tang <zetalabs at gmail.com>:
Please insert the commit message.
And.. please move the rev2 into the brace
e.g. [PATCH v2] ARM Add New Board GEC2410
> Signed-off-by: Hui.Tang <zetalabs at gmail.com>
> ---
Please always include a list of changed between the current and the
previous version of the patch.
> checkpatch.pl shows
> total: 0 errors, 0 warnings, 1249 lines checked
>
> 0001-ARM-Add-New-Board-GEC2410.patch has no obvious style problems and is ready for submission.
> MAINTAINERS | 4 +
> MAKEALL | 1 +
> Makefile | 7 +
> board/gec/gec2410/Makefile | 54 ++++++
> board/gec/gec2410/README | 85 +++++++++
> board/gec/gec2410/config.mk | 34 ++++
> board/gec/gec2410/gec2410.c | 313 +++++++++++++++++++++++++++++++++
> board/gec/gec2410/gec2410_mem.h | 118 +++++++++++++
> board/gec/gec2410/lowlevel_init.S | 93 ++++++++++
> board/gec/gec2410/u-boot-nand.lds | 61 +++++++
> cpu/arm920t/s3c24x0/timer.c | 3 +-
> include/configs/gec2410.h | 249 ++++++++++++++++++++++++++
> nand_spl/board/gec/gec2410/Makefile | 103 +++++++++++
> nand_spl/board/gec/gec2410/config.mk | 40 +++++
> nand_spl/board/gec/gec2410/u-boot.lds | 60 +++++++
> 15 files changed, 1224 insertions(+), 1 deletions(-)
> create mode 100644 board/gec/gec2410/Makefile
> create mode 100644 board/gec/gec2410/README
> create mode 100644 board/gec/gec2410/config.mk
> create mode 100644 board/gec/gec2410/gec2410.c
> create mode 100644 board/gec/gec2410/gec2410_mem.h
> create mode 100644 board/gec/gec2410/lowlevel_init.S
> create mode 100644 board/gec/gec2410/u-boot-nand.lds
> create mode 100644 include/configs/gec2410.h
> create mode 100644 nand_spl/board/gec/gec2410/Makefile
> create mode 100644 nand_spl/board/gec/gec2410/config.mk
> create mode 100644 nand_spl/board/gec/gec2410/u-boot.lds
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d70a9d2..6ecba41 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -429,6 +429,10 @@ Timur Tabi <timur at freescale.com>
> MPC8349E-mITX MPC8349
> MPC8349E-mITX-GP MPC8349
>
> +Hui Tang <zetalabs at gmail.com>
> +
> + gec2410 ARM920T
> +
> Erik Theisen <etheisen at mindspring.com>
>
> W7OLMC PPC4xx
> diff --git a/MAKEALL b/MAKEALL
> index d63c5c2..fffa58a 100755
> --- a/MAKEALL
> +++ b/MAKEALL
> @@ -548,6 +548,7 @@ LIST_ARM9=" \
> cp926ejs \
> cp946es \
> cp966 \
> + gec2410 \
> imx27lite \
> lpd7a400 \
> mv88f6281gtw_ge \
> diff --git a/Makefile b/Makefile
> index bcb3fe9..2de0b1d 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -2951,6 +2951,13 @@ davinci_dm365evm_config : unconfig
> davinci_dm6467evm_config : unconfig
> @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
>
> +gec2410_config : unconfig
> + @mkdir -p $(obj)include $(obj)board/gec/gec2410
> + @mkdir -p $(obj)nand_spl/board/gec/gec2410
> + @echo "RAM_TEXT = 0x33e00000" >> $(obj)board/gec/gec2410/config.tmp
> + @$(MKCONFIG) $(@:_config=) arm arm920t gec2410 gec s3c24x0
> + @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
> +
> imx27lite_config: unconfig
> @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
>
> diff --git a/board/gec/gec2410/Makefile b/board/gec/gec2410/Makefile
> new file mode 100644
> index 0000000..052f600
> --- /dev/null
> +++ b/board/gec/gec2410/Makefile
> @@ -0,0 +1,54 @@
> +#
> +# (C) Copyright 2000-2006
> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> +#
> +# (C) Copyright 2009
> +# Hui Tang <zetalabs at gmail.com>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB = $(obj)lib$(BOARD).a
> +
> +COBJS := gec2410.o
> +SOBJS := lowlevel_init.o
> +
> +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
> +OBJS := $(addprefix $(obj),$(COBJS))
> +SOBJS := $(addprefix $(obj),$(SOBJS))
> +
> +$(LIB): $(obj).depend $(OBJS) $(SOBJS)
> + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
> +
> +clean:
> + rm -f $(SOBJS) $(OBJS)
> +
> +distclean: clean
> + rm -f $(LIB) core *.bak $(obj).depend
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/board/gec/gec2410/README b/board/gec/gec2410/README
> new file mode 100644
> index 0000000..952aae8
> --- /dev/null
> +++ b/board/gec/gec2410/README
> @@ -0,0 +1,85 @@
> +U-Boot for GEC2410
> +
> +------------------------------------------------
> +The supported features of the GEC2410 board are:
> + CPU (Samsung S3C2410 SoC)
> + SDRAM (64 MB , 2 pcs K4S561632, 32 bit)
> + NAND FLASH (64MB , 1 pcs K9F1208)
> + NOR FLASH (only on rev1.1 board, 2MB , 1 pcs SST39VF1601)
> + ETHERNET (10M , 1 pcs CS8900)
> +
> +
> +------------------------------------------------
> +Memory Map from CPU point of view:
> +
> +for NAND FLASH boot:
> + Start Size Access to
> + -----------------------------------------------------
> + 0x00000000 64MB NAND FLASH (first 4K SRAM for stepptingstone)
> + 0x19000300 CS8900 I/O base
> + 0x30000000 64MB SDRAM
> + 0x48000000 128MB Special Function Registers Area
> +
> +
> +for NOR FLASH boot:
> + Start Size Access to
> + -----------------------------------------------------
> + 0x00000000 2MB NOR FLASH
> + 0x19000300 CS8900 I/O base
> + 0x30000000 64MB SDRAM
> + 0x40000000 4KB BootSRAM
> + 0x48000000 128MB Special Function Registers Area
> +
> +
> +------------------------------------------------
> +Setting the board Jumpers & Switches:
> +
> + In order to get the board running with the default configuration the
> + jumpers need to be set as follows:
> +
> + Core board Jumpers:
> + JP1 close (Set boot mode, close for booting from NAND FLASH,
> + otherwise from NOR FLASH)
> +
> + Main board Jumpers:
> + J1 close (Set beep, close for enabling beep, or disabling beep)
> + J18 1-2 (1-2 set RXD2 as UART; 2-3 set RXD2 as IrDA)
> + J9,J10 2-3 (1-2 set USB HOST 1 to Host mode;
> + 2-3 set USB HOST 1 to Device mode)
> + J13 1-2 (1-2 set LCD working power to 5V;
> + 2-3 set LCD working power to 3.3V)
> +
> + Core board Switches:
> + S1 open (Reset button)
> +
> + Main board Switches:
> + K1~K16 open (4x4 keyboard)
> +
> +
> +------------------------------------------------
> +LED & Connector Interfaces:
> +
> + Core board LEDs:
> + D1,D2 I/O port
> + D3 PWREN pin LED
> + D4 Core board power
> +
> + Main board LEDs:
> + D1~D4 GPIO
> + D5,D6 Ethernet
> + D11 Main board power
> +
> + Core board Connector Interfaces:
> + J1 JTAG (20 pins)
> +
> + Main board Connector Interfaces:
> + RJ1 Ethernet (RJ45)
> + J2 Audio In
> + J3 Audio Out
> + J4 Serial Port 1
> + J5 Serial Port 2
> + U4 IrDA Port
> + J7 USB HOST 0
> + J9 USB HOST 1 / USB DEVICE
> + J11 USB DEVICE
> + J20 GPIO Pins
> diff --git a/board/gec/gec2410/config.mk b/board/gec/gec2410/config.mk
> new file mode 100644
> index 0000000..f32ee2e
> --- /dev/null
> +++ b/board/gec/gec2410/config.mk
> @@ -0,0 +1,34 @@
> +#
> +# (C) Copyright 2002
> +# Gary Jennejohn, DENX Software Engineering, <garyj at denx.de>
> +# David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
> +#
> +# GuangDong Embedded Software Center GEC2410 board with S3C2410X (ARM920T) cpu
> +#
> +# see http://www.gd-emb.com/sales_detail/menu-2410.html for more information on GEC2410
> +#
> +
> +#
> +# GEC2410 has 1 bank of 64 MB DRAM
> +#
> +# 3000'0000 to 3400'0000
> +#
> +# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
> +# optionally with a ramdisk at 3080'0000
> +#
> +# we load ourself to 33e0'0000
> +#
> +# download area is 3300'c000
> +#
> +
> +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
> +
> +ifndef CONFIG_NAND_SPL
> +TEXT_BASE = $(RAM_TEXT)
> +else
> +TEXT_BASE = 0
> +endif
> +
> +LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot-nand.lds
> +
> +PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/gec/gec2410
> diff --git a/board/gec/gec2410/gec2410.c b/board/gec/gec2410/gec2410.c
> new file mode 100644
> index 0000000..1f941ad
> --- /dev/null
> +++ b/board/gec/gec2410/gec2410.c
> @@ -0,0 +1,313 @@
> +/*
> + * (C) Copyright 2002
> + * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
> + * Marius Groeger <mgroeger at sysgo.de>
> + *
> + * (C) Copyright 2002
> + * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
> + *
> + * (C) Copyright 2009
> + * Hui Tang, <zetalabs at gmail.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <netdev.h>
> +#include <asm/arch/s3c2410.h>
> +#include <asm/io.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#define FCLK_SPEED 1
> +
> +#if FCLK_SPEED == 0 /* Fout = 203MHz, Fin = 12MHz for Audio */
> +#define M_MDIV 0xC3
> +#define M_PDIV 0x4
> +#define M_SDIV 0x1
> +#elif FCLK_SPEED == 1 /* Fout = 202.8MHz */
> +#define M_MDIV 0xA1
> +#define M_PDIV 0x3
> +#define M_SDIV 0x1
> +#endif
> +
> +#define USB_CLOCK 1
> +
> +#if USB_CLOCK == 0
> +#define U_M_MDIV 0xA1
> +#define U_M_PDIV 0x3
> +#define U_M_SDIV 0x1
> +#elif USB_CLOCK == 1
> +#define U_M_MDIV 0x48
> +#define U_M_PDIV 0x3
> +#define U_M_SDIV 0x2
> +#endif
> +
> +static inline void delay(unsigned long loops)
> +{
> + __asm__ volatile ("1:\n"
> + "subs %0, %1, #1\n"
> + "bne 1b" : "=r" (loops) : "0" (loops));
> +}
> +
> +/*
> + * Miscellaneous platform dependent initialisations
> + */
> +
> +int board_init(void)
> +{
> + struct s3c24x0_clock_power * const clk_power =
> + s3c24x0_get_base_clock_power();
> + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
> +
> + /* to reduce PLL lock time, adjust the LOCKTIME register */
> + writel(0xFFFFFF, &clk_power->LOCKTIME);
> +
> + /* configure MPLL */
> + writel(((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV), &clk_power->MPLLCON);
> +
> + /* some delay between MPLL and UPLL */
> + delay(4000);
> +
> + /* configure UPLL */
> + writel(((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV),
> + &clk_power->UPLLCON);
> +
> + /* some delay between MPLL and UPLL */
> + delay(8000);
> +
> + /* set up the I/O ports */
> + /* configure GPA port */
> + /*====================================*
> + * PIN FUNCTION VALUE *
> + *====================================*
> + * GPA22 nFCE 1
> + * GPA21 nRSTOUT 1
> + * GPA20 nFRE 1
> + * GPA19 nFWE 1
> + * GPA18 ALE 1
> + * GPA17 CLE 1
> + * GPA16 nGCS5 1
> + * GPA15 nGCS4 1
> + * GPA14 nGCS3 1
> + * GPA13 nGCS2 1
> + * GPA12 nGCS1 1
> + * GPA11 ADDR26 1
> + * GPA10 ADDR25 1
> + * GPA9 ADDR24 1
> + * GPA8 ADDR23 1
> + * GPA7 ADDR22 1
> + * GPA6 ADDR21 1
> + * GPA5 ADDR20 1
> + * GPA4 ADDR19 1
> + * GPA3 ADDR18 1
> + * GPA2 ADDR17 1
> + * GPA1 ADDR16 1
> + * GPA0 ADDR0 1
> + *====================================*/
> + writel(0x007FFFFF, &gpio->GPACON);
> +
> + /* configure GPB port */
> + /*====================================*
> + * PIN FUNCTION VALUE *
> + *====================================*
> + * GPB10 Input 00
> + * GPB9 Output 01
> + * GPB8 Input 00
> + * GPB7 Output 01
> + * GPB6 Input 00
> + * GPB5 Output 01
> + * GPB4 Output 01
> + * GPB3 Output 01
> + * GPB2 Output 01
> + * GPB1 Output 01
> + * GPB0 Output 01
> + *====================================*/
> + writel(0x00044555, &gpio->GPBCON);
> + /* disable all pull-up register */
> + writel(0x000007FF, &gpio->GPBUP);
> +
> + /* configure GPC port */
> + /*====================================*
> + * PIN FUNCTION VALUE *
> + *====================================*
> + * GPC15 VD7 10
> + * GPC14 VD6 10
> + * GPC13 VD5 10
> + * GPC12 VD4 10
> + * GPC11 VD3 10
> + * GPC10 VD2 10
> + * GPC9 VD1 10
> + * GPC8 VD0 10
> + * GPC7 LCDVF2 10
> + * GPC6 LCDVF1 10
> + * GPC5 LCDVF0 10
> + * GPC4 VM 10
> + * GPC3 VFRAME 10
> + * GPC2 VLINE 10
> + * GPC1 VCLK 10
> + * GPC0 LEND 10
> + *====================================*/
> + writel(0xAAAAAAAA, &gpio->GPCCON);
> + /* disable all pull-up register */
> + writel(0x0000FFFF, &gpio->GPCUP);
> +
> + /* configure GPD port */
> + /*====================================*
> + * PIN FUNCTION VALUE *
> + *====================================*
> + * GPD15 VD23 10
> + * GPD14 VD22 10
> + * GPD13 VD21 10
> + * GPD12 VD20 10
> + * GPD11 VD19 10
> + * GPD10 VD18 10
> + * GPD9 VD17 10
> + * GPD8 VD16 10
> + * GPD7 VD15 10
> + * GPD6 VD14 10
> + * GPD5 VD13 10
> + * GPD4 VD12 10
> + * GPD3 VD11 10
> + * GPD2 VD10 10
> + * GPD1 VD9 10
> + * GPD0 VD8 10
> + *====================================*/
> + writel(0xAAAAAAAA, &gpio->GPDCON);
> + /* disable all pull-up register */
> + writel(0x0000FFFF, &gpio->GPDUP);
> +
> + /* configure GPE port */
> + /*====================================*
> + * PIN FUNCTION VALUE *
> + *====================================*
> + * GPE15 IICSDA 10
> + * GPE14 IICSCL 10
> + * GPE13 SPICLK0 10
> + * GPE12 SPIMOSIO 10
> + * GPE11 SPIMISOO 10
> + * GPE10 SDDAT3 10
> + * GPE9 SDDAT2 10
> + * GPE8 SDDAT1 10
> + * GPE7 SDDAT0 10
> + * GPE6 SDCMD 10
> + * GPE5 SDCLK 10
> + * GPE4 I2SSDO 10
> + * GPE3 I2SSDI 10
> + * GPE2 CDCLK 10
> + * GPE1 I2SSCLK 10
> + * GPE0 I2SLRCK 10
> + *====================================*/
> + writel(0xAAAAAAAA, &gpio->GPECON);
> + /* disable all pull-up register */
> + writel(0x0000FFFF, &gpio->GPEUP);
> +
> + /* configure GPF port */
> + /*====================================*
> + * PIN FUNCTION VALUE *
> + *====================================*
> + * GPF7 Output 01
> + * GPF6 Output 01
> + * GPF5 Output 01
> + * GPF4 Output 01
> + * GPF3 EINT3 10
> + * GPF2 EINT2 10
> + * GPF1 EINT1 10
> + * GPF0 EINT0 10
> + *====================================*/
> + writel(0x000055AA, &gpio->GPFCON);
> + /* disable all pull-up register */
> + writel(0x000000FF, &gpio->GPFUP);
> +
> + /* configure GPG port */
> + /*====================================*
> + * PIN FUNCTION VALUE *
> + *====================================*
> + * GPG15 nYPON 11
> + * GPG14 YMON 11
> + * GPG13 nXPON 11
> + * GPG12 XMON 11
> + * GPG11 EINT19 10
> + * GPG10 Output 01
> + * GPG9 Output 01
> + * GPG8 Output 01
> + * GPG7 SPICLK1 11
> + * GPG6 SPIMOSI1 11
> + * GPG5 SPIMISO1 11
> + * GPG4 LCD_PWREN 11
> + * GPG3 EINT11 10
> + * GPG2 nSS0 11
> + * GPG1 EINT9 10
> + * GPG0 EINT8 10
> + *====================================*/
> + writel(0xFF95FFBA, &gpio->GPGCON);
> + /* disable all pull-up register */
> + writel(0x0000FFFF, &gpio->GPGUP);
> +
> + /* configure GPH port */
> + /*====================================*
> + * PIN FUNCTION VALUE *
> + *====================================*
> + * GPH10 CLKOUT1 10
> + * GPH9 CLKOUT0 10
> + * GPH8 UEXTCLK 10
> + * GPH7 nCTS1 11
> + * GPH6 nRTS1 11
> + * GPH5 RXD1 10
> + * GPH4 TXD1 10
> + * GPH3 RXD0 10
> + * GPH2 TXD0 10
> + * GPH1 nRTS0 10
> + * GPH0 nCTS0 10
> + *====================================*/
> + writel(0x002AFAAA, &gpio->GPHCON);
> + /* disable all pull-up register */
> + writel(0x000007FF, &gpio->GPHUP);
> +
> + /* arch number of GEC2410-Board */
> + gd->bd->bi_arch_number = MACH_TYPE_GEC2410;
> +
> + /* adress of boot parameters */
> + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
> +
> + icache_enable();
> + dcache_enable();
> +
> + return 0;
> +}
> +
> +int dram_init(void)
> +{
> + gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> + gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
> + PHYS_SDRAM_1_SIZE);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_CMD_NET
> +int board_eth_init(bd_t *bis)
> +{
> + int rc = 0;
> +#ifdef CONFIG_CS8900
> + rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
> +#endif
> + return rc;
> +}
> +#endif
> diff --git a/board/gec/gec2410/gec2410_mem.h b/board/gec/gec2410/gec2410_mem.h
> new file mode 100644
> index 0000000..93f820b
> --- /dev/null
> +++ b/board/gec/gec2410/gec2410_mem.h
> @@ -0,0 +1,118 @@
> +/*
> + * Memory Setup stuff - taken from blob memsetup.S
> + *
> + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
> + * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
> + *
> + * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
> + *
> + * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar at sec.samsung.com>
> + *
> + * Modified for the Samsung SMDK2410 by
> + * (C) Copyright 2002
> + * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
> + *
> + * Copyright (C) 2009 Hui Tang <zetalabs at gmail.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#define BWSCON 0x48000000
> +
> +/* BWSCON */
> +#define DW8 (0x0)
> +#define DW16 (0x1)
> +#define DW32 (0x2)
> +#define WAIT (0x1<<2)
> +#define UBLB (0x1<<3)
> +
> +#define B1_BWSCON (DW32)
> +#define B2_BWSCON (DW16)
> +#define B3_BWSCON (DW16 + WAIT + UBLB)
> +#define B4_BWSCON (DW16)
> +#define B5_BWSCON (DW16)
> +#define B6_BWSCON (DW32)
> +#define B7_BWSCON (DW32)
> +
> +/* BANK0CON */
> +#define B0_Tacs 0x0 /* 0clk */
> +#define B0_Tcos 0x0 /* 0clk */
> +#define B0_Tacc 0x7 /* 14clk */
> +#define B0_Tcoh 0x0 /* 0clk */
> +#define B0_Tah 0x0 /* 0clk */
> +#define B0_Tacp 0x0
> +#define B0_PMC 0x0 /* normal */
> +
> +/* BANK1CON */
> +#define B1_Tacs 0x0 /* 0clk */
> +#define B1_Tcos 0x0 /* 0clk */
> +#define B1_Tacc 0x7 /* 14clk */
> +#define B1_Tcoh 0x0 /* 0clk */
> +#define B1_Tah 0x0 /* 0clk */
> +#define B1_Tacp 0x0
> +#define B1_PMC 0x0
> +
> +#define B2_Tacs 0x0
> +#define B2_Tcos 0x0
> +#define B2_Tacc 0x7
> +#define B2_Tcoh 0x0
> +#define B2_Tah 0x0
> +#define B2_Tacp 0x0
> +#define B2_PMC 0x0
> +
> +#define B3_Tacs 0x0 /* 0clk */
> +#define B3_Tcos 0x3 /* 4clk */
> +#define B3_Tacc 0x7 /* 14clk */
> +#define B3_Tcoh 0x1 /* 1clk */
> +#define B3_Tah 0x0 /* 0clk */
> +#define B3_Tacp 0x3 /* 6clk */
> +#define B3_PMC 0x0 /* normal */
> +
> +#define B4_Tacs 0x0 /* 0clk */
> +#define B4_Tcos 0x0 /* 0clk */
> +#define B4_Tacc 0x7 /* 14clk */
> +#define B4_Tcoh 0x0 /* 0clk */
> +#define B4_Tah 0x0 /* 0clk */
> +#define B4_Tacp 0x0
> +#define B4_PMC 0x0 /* normal */
> +
> +#define B5_Tacs 0x0 /* 0clk */
> +#define B5_Tcos 0x0 /* 0clk */
> +#define B5_Tacc 0x7 /* 14clk */
> +#define B5_Tcoh 0x0 /* 0clk */
> +#define B5_Tah 0x0 /* 0clk */
> +#define B5_Tacp 0x0
> +#define B5_PMC 0x0 /* normal */
> +
> +#define B6_MT 0x3 /* SDRAM */
> +#define B6_Trcd 0x1
> +#define B6_SCAN 0x1 /* 9bit */
> +
> +#define B7_MT 0x3 /* SDRAM */
> +#define B7_Trcd 0x1 /* 3clk */
> +#define B7_SCAN 0x1 /* 9bit */
> +
> +/* REFRESH parameter */
> +#define REFEN 0x1 /* Refresh enable */
> +#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
> +#define Trp 0x0 /* 2clk */
> +#define Trc 0x3 /* 7clk */
> +#define Tchr 0x2 /* 3clk */
> +#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
> +/**************************************/
> diff --git a/board/gec/gec2410/lowlevel_init.S b/board/gec/gec2410/lowlevel_init.S
> new file mode 100644
> index 0000000..215aaad
> --- /dev/null
> +++ b/board/gec/gec2410/lowlevel_init.S
> @@ -0,0 +1,93 @@
> +/*
> + * Memory Setup stuff - taken from blob memsetup.S
> + *
> + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
> + * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
> + *
> + * Modified for the Samsung SMDK2410 by
> + * (C) Copyright 2002
> + * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
> + *
> + * Copyright (C) 2009 Hui Tang <zetalabs at gmail.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <config.h>
> +#include <version.h>
> +#include "gec2410_mem.h"
> +
> +_TEXT_BASE:
> + .word TEXT_BASE
> +
> +.globl lowlevel_init
> +lowlevel_init:
> +#if defined(CONFIG_NAND_SPL) || !defined(CONFIG_BOOT_NAND)
> + /* memory control configuration */
> + /* make r0 relative the current location so that it */
> + /* reads SMRDATA out of FLASH rather than memory ! */
> + ldr r0, =SMRDATA
> + ldr r1, _TEXT_BASE
> + sub r0, r0, r1
> + ldr r1, =BWSCON /* Bus Width Status Controller */
> + add r2, r0, #13*4
> +0:
> + ldr r3, [r0], #4
> + str r3, [r1], #4
> + cmp r2, r0
> + bne 0b
> +#endif /* CONFIG_NAND_SPL */
> +
> + /* everything is fine now */
> + mov pc, lr
> +
> +/* dummy function, called by start_code() in cpu/arm920t/start.S */
> +.globl coloured_LED_init
> +coloured_LED_init:
> + mov pc, lr
> +
> +/* dummy function, called by start_code() in cpu/arm920t/start.S */
> +.globl red_LED_on
> +red_LED_on:
> + mov pc, lr
> +
> + .ltorg
> +/* the literal pools origin */
> +
> +SMRDATA:
> + .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12) \
> + +(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
> + .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8) \
> + +(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
> + .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8) \
> + +(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
> + .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8) \
> + +(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
> + .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8) \
> + +(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
> + .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8) \
> + +(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
> + .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8) \
> + +(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
> + .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
> + .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
> + .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
> + .word 0x32
> + .word 0x30
> + .word 0x30
> diff --git a/board/gec/gec2410/u-boot-nand.lds b/board/gec/gec2410/u-boot-nand.lds
> new file mode 100644
> index 0000000..a30ece3
> --- /dev/null
> +++ b/board/gec/gec2410/u-boot-nand.lds
> @@ -0,0 +1,61 @@
> +/*
> + * (C) Copyright 2002
> + * Gary Jennejohn, DENX Software Engineering, <garyj at denx.de>
> + *
> + * (C) Copyright 2008
> + * Guennadi Liakhovetki, DENX Software Engineering, <lg at denx.de>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
> +OUTPUT_ARCH(arm)
> +ENTRY(_start)
> +SECTIONS
> +{
> + . = 0x00000000;
> +
> + . = ALIGN(4);
> + .text :
> + {
> + cpu/arm920t/start.o (.text)
> + *(.text)
> + }
> +
> + . = ALIGN(4);
> + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
> +
> + . = ALIGN(4);
> + .data : { *(.data) }
> +
> + . = ALIGN(4);
> + .got : { *(.got) }
> +
> + __u_boot_cmd_start = .;
> + .u_boot_cmd : { *(.u_boot_cmd) }
> + __u_boot_cmd_end = .;
> +
> + . = ALIGN(4);
> + .mmudata : { *(.mmudata) }
> +
> + . = ALIGN(4);
> + __bss_start = .;
> + .bss : { *(.bss) . = ALIGN(4); }
> + _end = .;
> +}
> diff --git a/cpu/arm920t/s3c24x0/timer.c b/cpu/arm920t/s3c24x0/timer.c
> index 20cedd4..d463a03 100644
> --- a/cpu/arm920t/s3c24x0/timer.c
> +++ b/cpu/arm920t/s3c24x0/timer.c
> @@ -188,7 +188,8 @@ ulong get_tbclk(void)
> tbclk = timer_load_val * 100;
> #elif defined(CONFIG_SBC2410X) || \
> defined(CONFIG_SMDK2410) || \
> - defined(CONFIG_VCMA9)
> + defined(CONFIG_VCMA9) || \
> + defined(CONFIG_GEC2410)
> tbclk = CONFIG_SYS_HZ;
> #else
> # error "tbclk not configured"
> diff --git a/include/configs/gec2410.h b/include/configs/gec2410.h
> new file mode 100644
> index 0000000..a5c1b73
> --- /dev/null
> +++ b/include/configs/gec2410.h
> @@ -0,0 +1,249 @@
> +/*
> + * (C) Copyright 2002
> + * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
> + * Marius Groeger <mgroeger at sysgo.de>
> + * Gary Jennejohn <garyj at denx.de>
> + * David Mueller <d.mueller at elsoft.ch>
> + *
> + * Configuation settings for the GD-Embedded Software Center GEC2410 board.
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +/*
> + * High Level Configuration Options
> + * (easy to change)
> + */
> +#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
> +#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */
> +#define CONFIG_GEC2410 1 /* on a GEC2410 Board */
> +
> +#define CONFIG_SYS_SDRAM_BASE 0x30000000
> +
> +/* input clock of PLL */
> +#define CONFIG_SYS_CLK_FREQ 12000000 /* the GEC2410 has 12MHz input clock */
> +
> +#if !defined(CONFIG_NAND_SPL) && (TEXT_BASE >= 0xc0000000)
> +#define CONFIG_ENABLE_MMU
> +#endif
> +
> +#define CONFIG_SETUP_MEMORY_TAGS
> +#define CONFIG_CMDLINE_TAG
> +#define CONFIG_INITRD_TAG
> +
> +#define USE_920T_MMU 1
> +
> +/*
> + * Size of malloc() pool
> + */
> +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
> +#define CONFIG_SYS_GBL_DATA_SIZE 128
> +
> +/*
> + * Hardware drivers
> + */
> +#define CONFIG_NET_MULTI
> +#define CONFIG_CS8900 /* we have a CS8900 on-board */
> +#define CONFIG_CS8900_BASE 0x19000300
> +#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */
> +
> +/*
> + * select serial console configuration
> + */
> +#define CONFIG_S3C24X0_SERIAL 1
> +#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on GEC2410 */
> +
> +/************************************************************
> + * RTC
> + ************************************************************/
> +#define CONFIG_RTC_S3C24X0 1
> +
> +/* allow to overwrite serial and ethaddr */
> +#define CONFIG_ENV_OVERWRITE
> +
> +#define CONFIG_BAUDRATE 115200
> +
> +/*
> + * BOOTP options
> + */
> +#define CONFIG_BOOTP_BOOTFILESIZE
> +#define CONFIG_BOOTP_BOOTPATH
> +#define CONFIG_BOOTP_GATEWAY
> +#define CONFIG_BOOTP_HOSTNAME
> +
> +/*
> + * Command line configuration.
> + */
> +#include <config_cmd_default.h>
> +
> +#define CONFIG_CMD_CACHE
> +#define CONFIG_CMD_NAND
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_ELF
> +#define CONFIG_CMD_FAT
> +
> +/*
> + * Miscellaneous configurable options
> + */
> +#define CONFIG_SYS_LONGHELP /* undef to save memory */
> +#define CONFIG_SYS_PROMPT "GEC2410#" /* Monitor Command Prompt */
> +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
> +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
> +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
> +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
> +
> +#define CONFIG_SYS_MEMTEST_START \
> + CONFIG_SYS_SDRAM_BASE /* memtest works on */
> +#define CONFIG_SYS_MEMTEST_END \
> + (CONFIG_SYS_SDRAM_BASE + 0x3e00000) /* 62 MB in DRAM */
> +
> +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* default load address */
> +#define CONFIG_SYS_HZ 1000
> +
> +/* valid baudrates */
> +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
> +
> +/*-----------------------------------------------------------------------
> + * Stack sizes
> + *
> + * The stack sizes are set up in start.S using the settings below
> + */
> +#define CONFIG_STACKSIZE 0x40000 /* regular stack 256KB */
> +#ifdef CONFIG_USE_IRQ
> +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
> +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
> +#endif
> +
> +/*-----------------------------------------------------------------------
> + * Physical Memory Map
> + */
> +#define CONFIG_NR_DRAM_BANKS 1
> +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */
> +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
> +
> +#define CONFIG_SYS_FLASH_BASE 0x00000000
> +#define CONFIG_SYS_MONITOR_BASE 0x00000000
> +#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
> +
> +/*-----------------------------------------------------------------------
> + * FLASH and environment organization
> + */
> +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
> +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
> +
> +#define CONFIG_SYS_FLASH_CFI 1 /* Use CFI parameters (needed?) */
> +#define CONFIG_FLASH_CFI_DRIVER 1
> +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
> +
> +#define PHYS_FLASH_SIZE 0x00200000 /* 2MB */
> +#define CONFIG_ENV_ADDR \
> + (CONFIG_SYS_FLASH_BASE + 0x040000) /* addr of environment */
> +
> +/* timeout values are in ticks */
> +#define CONFIG_SYS_FLASH_ERASE_TOUT \
> + (5 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
> +#define CONFIG_SYS_FLASH_WRITE_TOUT \
> + (5 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
> +
> +#define CONFIG_ENV_SIZE 0x020000 /* Total Size of Environment Parameters */
> +
> +/*
> + * GEC2410 board specific data
> + */
> +#define CONFIG_IDENT_STRING " for GEC2410"
> +
> +/* base address for uboot */
> +#define CONFIG_SYS_PHY_UBOOT_BASE (CONFIG_SYS_SDRAM_BASE + 0x03e00000)
> +
> +/* total memory available to uboot */
> +#define CONFIG_SYS_UBOOT_SIZE (1024 * 1024)
> +
> +/* Put environment copies after the end of U-Boot owned RAM */
> +#define CONFIG_NAND_ENV_DST (CONFIG_SYS_UBOOT_BASE + CONFIG_SYS_UBOOT_SIZE)
> +
> +#ifdef CONFIG_ENABLE_MMU
> +#define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000
> +#define CONFIG_BOOTCOMMAND "nand read 0xc0008000 0x60000 0x1a0000;" \
> + "bootm 0xc0008000"
> +#else
> +#define CONFIG_SYS_MAPPED_RAM_BASE CONFIG_SYS_SDRAM_BASE
> +#define CONFIG_BOOTCOMMAND "nand read 0x30008000 0x60000 0x1a0000;" \
> + "bootm 0x30008000"
> +#endif
> +
> +/* NAND U-Boot load and start address */
> +#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_MAPPED_RAM_BASE + 0x03e00000)
> +#define CONFIG_ENV_OFFSET 0x0040000 /* Offset of Environment Sector */
> +
> +/* NAND configuration */
> +#define CONFIG_SYS_MAX_NAND_DEVICE 1
> +#define CONFIG_SYS_NAND_BASE 0x4e00000c /* R/W NAND Flash data register */
> +#define CONFIG_S3C2410_NAND_HWECC
> +#define CONFIG_S3C2410_NAND_BBT
> +
> +/* NUB load-addr */
> +#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_PHY_UBOOT_BASE
> +/* NUB start-addr */
> +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
> +
> +/* Offset to RAM U-Boot image */
> +#define CONFIG_SYS_NAND_U_BOOT_OFFS (4 * 1024)
> +/* Size of RAM U-Boot image */
> +#define CONFIG_SYS_NAND_U_BOOT_SIZE (252 * 1024)
> +
> +/* NAND chip page size */
> +#define CONFIG_SYS_NAND_PAGE_SIZE 512
> +/* NAND chip block size */
> +#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024)
> +/* NAND chip page per block count */
> +#define CONFIG_SYS_NAND_PAGE_COUNT 32
> +/* Location of the bad-block label */
> +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 5 /* Marks the 6th OOB byte */
> +/* Extra address cycle for > 32MiB */
> +#define CONFIG_SYS_NAND_4_ADDR_CYCLE 1 /* Fourth addr used (>32MB) */
> +
> +/* Size of the block protected by one OOB (Spare Area in Samsung terminology) */
> +#define CONFIG_SYS_NAND_ECCSIZE CONFIG_SYS_NAND_PAGE_SIZE
> +/* Number of ECC bytes per OOB - S3C2410 calculates 4 bytes ECC in 1-bit mode */
> +#define CONFIG_SYS_NAND_ECCBYTES 3
> +/* Number of ECC-blocks per NAND page */
> +#define CONFIG_SYS_NAND_ECCSTEPS \
> + (CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
> +/* Size of a single OOB region */
> +#define CONFIG_SYS_NAND_OOBSIZE 16
> +/* Number of ECC bytes per page */
> +#define CONFIG_SYS_NAND_ECCTOTAL \
> + (CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
> +/* ECC byte positions */
> +#define CONFIG_SYS_NAND_ECCPOS {0, 1, 2}
> +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
> +
> +/* Boot configuration */
> +#define CONFIG_BOOT_NAND
> +#define CONFIG_NAND
> +#define CONFIG_NAND_S3C2410 1
> +
> +/* Settings as above boot configuration */
> +#define CONFIG_ENV_IS_IN_NAND
> +#define CONFIG_BOOTARGS "console=ttySAC,115200"
> +
> +#endif /* __CONFIG_H */
> diff --git a/nand_spl/board/gec/gec2410/Makefile b/nand_spl/board/gec/gec2410/Makefile
> new file mode 100644
> index 0000000..ece460d
> --- /dev/null
> +++ b/nand_spl/board/gec/gec2410/Makefile
> @@ -0,0 +1,103 @@
> +#
> +# (C) Copyright 2006-2007
> +# Stefan Roese, DENX Software Engineering, sr at denx.de.
> +#
> +# (C) Copyright 2008
> +# Guennadi Liakhovetki, DENX Software Engineering, <lg at denx.de>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +CONFIG_NAND_SPL = y
> +CONFIG_SKIP_RELOCATE_UBOOT = y
> +
> +include $(TOPDIR)/config.mk
> +include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
> +
> +LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
> +LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
> +AFLAGS += -DCONFIG_NAND_SPL -DCONFIG_SKIP_RELOCATE_UBOOT
> +CFLAGS += -DCONFIG_NAND_SPL -DCONFIG_SKIP_RELOCATE_UBOOT
> +
> +SOBJS = start.o lowlevel_init.o
> +COBJS = nand_boot.o s3c2410_nand.o
> +
> +SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
> +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
> +__OBJS := $(SOBJS) $(COBJS)
> +LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR)
> +
> +nandobj := $(OBJTREE)/nand_spl/
> +
> +ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
> +
> +all: $(obj).depend $(ALL)
> +
> +$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
> + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
> +
> +$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
> + $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
> +
> +$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds
> + cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
> + -Map $(nandobj)u-boot-spl.map \
> + -o $(nandobj)u-boot-spl
> +
> +$(nandobj)u-boot.lds: $(LDSCRIPT)
> + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
> +
> +# create symbolic links for common files
> +
> +# from cpu directory
> +$(obj)start.S:
> + @rm -f $@
> + @ln -s $(TOPDIR)/cpu/arm920t/start.S $@
> +
> +# from SoC directory
> +
> +# from board directory
> +$(obj)lowlevel_init.S:
> + @rm -f $@
> + @ln -s $(TOPDIR)/board/gec/gec2410/lowlevel_init.S $@
> +
> +# from nand_spl directory
> +$(obj)nand_boot.c:
> + @rm -f $@
> + @ln -s $(TOPDIR)/nand_spl/nand_boot.c $@
> +
> +# from drivers/mtd/nand directory
> +$(obj)s3c2410_nand.c:
> + @rm -f $@
> + @ln -s $(TOPDIR)/drivers/mtd/nand/s3c2410_nand.c $@
> +
> +#########################################################################
> +
> +$(obj)%.o: $(obj)%.S
> + $(CC) $(AFLAGS) -c -o $@ $<
> +
> +$(obj)%.o: $(obj)%.c
> + $(CC) $(CFLAGS) -c -o $@ $<
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/nand_spl/board/gec/gec2410/config.mk b/nand_spl/board/gec/gec2410/config.mk
> new file mode 100644
> index 0000000..7db7fd1
> --- /dev/null
> +++ b/nand_spl/board/gec/gec2410/config.mk
> @@ -0,0 +1,40 @@
> +#
> +# (C) Copyright 2006
> +# Stefan Roese, DENX Software Engineering, sr at denx.de.
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +#
> +# GEC2410 Study Platform (gec2410) board
> +
> +# TEXT_BASE for SPL:
> +#
> +# On S3C2410 platforms the SPL is located in SRAM at 0.
> +#
> +TEXT_BASE = 0
> +
> +include $(TOPDIR)/board/$(BOARDDIR)/config.mk
> +
> +# PAD_TO used to generate a 4kByte binary needed for the combined image
> +# -> PAD_TO = TEXT_BASE + 4096
> +PAD_TO := 0x00001000
> +
> +ifeq ($(debug),1)
> +PLATFORM_CPPFLAGS += -DDEBUG
> +endif
> diff --git a/nand_spl/board/gec/gec2410/u-boot.lds b/nand_spl/board/gec/gec2410/u-boot.lds
> new file mode 100644
> index 0000000..5871f7e
> --- /dev/null
> +++ b/nand_spl/board/gec/gec2410/u-boot.lds
> @@ -0,0 +1,60 @@
> +/*
> + * (C) Copyright 2002
> + * Gary Jennejohn, DENX Software Engineering, <garyj at denx.de>
> + *
> + * (C) Copyright 2008
> + * Guennadi Liakhovetki, DENX Software Engineering, <lg at denx.de>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
> +OUTPUT_ARCH(arm)
> +ENTRY(_start)
> +SECTIONS
> +{
> + . = 0x00000000;
> +
> + . = ALIGN(4);
> + .text :
> + {
> + start.o (.text)
> + nand_boot.o (.text)
> +
> + *(.text)
> + }
> +
> + . = ALIGN(4);
> + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
> +
> + . = ALIGN(4);
> + .data : { *(.data) }
> +
> + . = ALIGN(4);
> + .got : { *(.got) }
> +
> + __u_boot_cmd_start = .;
> + .u_boot_cmd : { *(.u_boot_cmd) }
> + __u_boot_cmd_end = .;
> +
> + . = ALIGN(4);
> + __bss_start = .;
> + .bss : { *(.bss) . = ALIGN(4); }
> + _end = .;
> +}
> --
> 1.6.0.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
Thanks
Minkyu Kang
--
from. prom.
www.promsoft.net
More information about the U-Boot
mailing list