[U-Boot] [PATCH] omap3: add CM-T35 board
Paulraj, Sandeep
s-paulraj at ti.com
Wed Nov 11 14:01:41 CET 2009
> -----Original Message-----
> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
> On Behalf Of Mike Rapoport
> Sent: Wednesday, November 11, 2009 3:03 AM
> To: u-boot at lists.denx.de
> Cc: Mike Rapoport
> Subject: [U-Boot] [PATCH] omap3: add CM-T35 board
>
> Add CM-T35 board support
>
> Signed-off-by: Mike Rapoport <mike at compulab.co.il>
> ---
> Makefile | 3 +
> board/cm-t35/Makefile | 47 ++++++
> board/cm-t35/cm-t35.c | 196 ++++++++++++++++++++++++++
> board/cm-t35/cm-t35.h | 173 +++++++++++++++++++++++
> board/cm-t35/config.mk | 30 ++++
> include/configs/omap3_cm-t35.h | 301
If you look at the way OMAP3 is structured now.
Board specific stuff goes into /board/ti/
It has beagle, sdp, etc
> ++++++++++++++++++++++++++++++++++++++++
> 6 files changed, 750 insertions(+), 0 deletions(-)
> create mode 100644 board/cm-t35/Makefile
> create mode 100644 board/cm-t35/cm-t35.c
> create mode 100644 board/cm-t35/cm-t35.h
> create mode 100644 board/cm-t35/config.mk
> create mode 100755 include/configs/omap3_cm-t35.h
You also need entries to MAKEALL and MAINTAINERS
>
> diff --git a/Makefile b/Makefile
> index bcb3fe9..8771c90 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -3168,6 +3168,9 @@ omap3_zoom1_config : unconfig
> omap3_zoom2_config : unconfig
> @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
>
> +omap3_cm-t35_config : unconfig
> + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3
> +
> smdkc100_config: unconfig
> @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
>
> diff --git a/board/cm-t35/Makefile b/board/cm-t35/Makefile
> new file mode 100644
> index 0000000..7b80aaa
> --- /dev/null
> +++ b/board/cm-t35/Makefile
> @@ -0,0 +1,47 @@
> +#
> +# (C) Copyright 2000, 2001, 2002
> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB = $(obj)lib$(BOARD).a
> +
> +COBJS := cm-t35.o
> +
> +SRCS := $(COBJS:.o=.c)
> +OBJS := $(addprefix $(obj),$(COBJS))
> +
> +$(LIB): $(obj).depend $(OBJS)
> + $(AR) $(ARFLAGS) $@ $(OBJS)
> +
> +clean:
> + rm -f $(OBJS)
> +
> +distclean: clean
> + rm -f $(LIB) core *.bak $(obj).depend
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> diff --git a/board/cm-t35/cm-t35.c b/board/cm-t35/cm-t35.c
> new file mode 100644
> index 0000000..8f0be65
> --- /dev/null
> +++ b/board/cm-t35/cm-t35.c
> @@ -0,0 +1,196 @@
> +/*
> + * (C) Copyright 2009
> + * CompuLab, Ltd. <www.compulab.co.il>
> + *
> + * Authors :
> + * Igor Vaisbein <igor at compulab.co.il>
> + * Mike Rapoport <mike at compulab.co.il>
> + *
> + * Derived from omap3evm and Beagle Board by
> + * Manikandan Pillai <mani.pillai at ti.com>
> + * Richard Woodruff <r-woodruff2 at ti.com>
> + * Syed Mohammed Khasim <x0khasim at ti.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <netdev.h>
> +#include <net.h>
> +#include <i2c.h>
> +#include <twl4030.h>
> +
> +#include <asm/io.h>
> +#include <asm/arch/mem.h>
> +#include <asm/arch/mux.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/mach-types.h>
> +
> +#include "cm-t35.h"
> +
> +#define CM_T35_SMC911X_BASE 0x2C000000
> +#define SB_T35_SMC911X_BASE (CM_T35_SMC911X_BASE + SZ_16M)
> +
> +static u32 gpmc_net_config[GPMC_MAX_REG] = {
> + NET_GPMC_CONFIG1,
> + NET_GPMC_CONFIG2,
> + NET_GPMC_CONFIG3,
> + NET_GPMC_CONFIG4,
> + NET_GPMC_CONFIG5,
> + NET_GPMC_CONFIG6,
> + 0
> +};
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/*
> + * Routine: setup_net_chip
> + * Description: Setting up the configuration GPMC registers specific to
> the
> + * Ethernet hardware.
> + */
> +static void setup_net_chip(void)
> +{
> + struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
> +
> + enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[5],
> + CM_T35_SMC911X_BASE, GPMC_SIZE_16M);
> + enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[4],
> + SB_T35_SMC911X_BASE, GPMC_SIZE_16M);
> +
> + /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
> + writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
> +
> + /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
> + writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
> +
> + /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
> + writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
> + &ctrl_base->gpmc_nadv_ale);
> +
> + /* Reset the ethernet controller via TPS65930 GPIO */
> + /* Set GPIO1 of TPS65930 as output */
> + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
> + TWL4030_BASEADD_GPIO+0x03);
> + /* Send a pulse on the GPIO pin */
> + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
> + TWL4030_BASEADD_GPIO+0x0C);
> + udelay(1);
> + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
> + TWL4030_BASEADD_GPIO+0x09);
> + udelay(1);
> + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
> + TWL4030_BASEADD_GPIO+0x0C);
> +
> +}
> +
> +/*
> + * Routine: board_init
> + * Description: Early hardware init.
> + */
> +int board_init(void)
> +{
> + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
> +
> + /* board id for Linux */
> + gd->bd->bi_arch_number = MACH_TYPE_CM_T35;
> + /* boot param addr */
> + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
> +
> + return 0;
> +}
> +
> +/*
> + * Routine: misc_init_r
> + * Description: Init ethernet (done here so udelay works)
> + */
> +int misc_init_r(void)
> +{
> +
> +#ifdef CONFIG_DRIVER_OMAP34XX_I2C
> + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
> +#endif
> +
> +#if defined(CONFIG_CMD_NET)
> + setup_net_chip();
> +#endif
> +
> + dieid_num_r();
> +
> + return 0;
> +}
> +
> +/*
> + * Routine: set_muxconf_regs
> + * Description: Setting up the configuration Mux registers specific to
> the
> + * hardware. Many pins need to be moved from protect to primary
> + * mode.
> + */
> +void set_muxconf_regs(void)
> +{
> + MUX_CM_T35();
> +}
> +
> +/*
> + * Routine: handle_mac_address
> + * Description: prepare MAC address for on-board Ethernet.
> + */
> +static int handle_mac_address(void)
> +{
> + unsigned char enetaddr[6];
> + int rc;
> +
> + rc = eth_getenv_enetaddr("ethaddr", enetaddr);
> + if (rc)
> + return 0;
> +
> + rc = i2c_read(0x50, 0, 1, enetaddr, 6);
> + if (rc)
> + return rc;
> +
> + if (!is_valid_ether_addr(enetaddr))
> + return -1;
> +
> + return eth_setenv_enetaddr("ethaddr", enetaddr);
> +}
> +
> +/*
> + * Routine: board_eth_init
> + * Description: initialize module and base-board Ethernet chips
> + */
> +int board_eth_init(bd_t *bis)
> +{
> + int err1 = 0, err2 = 0;
> +
> +#ifdef CONFIG_SMC911X
> + err1 = handle_mac_address();
> + err2 = smc911x_initialize(0, CM_T35_SMC911X_BASE);
> +
> + if (err1 && !err2)
> + printf("CM-T35: No MAC address found\n");
> +
> + err1 = smc911x_initialize(1, SB_T35_SMC911X_BASE);
> +
> + /* run eth_init to set up MAC address prior to OS boot */
> + if (!err1 || !err2)
> + err1 = eth_init(bis);
> + else
> + err1 = -1;
> +#endif
> + return err1;
> +}
> diff --git a/board/cm-t35/cm-t35.h b/board/cm-t35/cm-t35.h
> new file mode 100644
> index 0000000..d44d89e
> --- /dev/null
> +++ b/board/cm-t35/cm-t35.h
> @@ -0,0 +1,173 @@
> +/*
> + * (C) Copyright 2009 CompuLab, Ltd
> + * Authors:
> + * Igor Vaisbein <igor at compulab.co.il>
> + * Mike Rapoport <mike at compulab.co.il>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +#ifndef _CM_T35_H_
> +#define _CM_T35_H_
> +
> +const omap3_sysinfo sysinfo = {
> + DDR_DISCRETE,
> + "CM-T35 board",
> + "NAND",
> +};
> +
> +/* static void setup_net_chip(void); */
> +
> +/*
> + * IEN - Input Enable
> + * IDIS - Input Disable
> + * PTD - Pull type Down
> + * PTU - Pull type Up
> + * DIS - Pull type selection is inactive
> + * EN - Pull type selection is active
> + * M0 - Mode 0
> + * The commented string gives the final mux configuration for that pin
> + */
> +#define MUX_CM_T35() \
> + /*SDRC*/\
> + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\
> + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\
> + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\
> + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\
> + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\
> + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\
> + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\
> + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\
> + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\
> + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\
> + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\
> + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\
> + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\
> + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\
> + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\
> + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\
> + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\
> + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\
> + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\
> + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\
> + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\
> + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\
> + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\
> + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\
> + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\
> + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\
> + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\
> + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\
> + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\
> + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\
> + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\
> + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\
> + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\
> + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0))
> /*SDRC_DQS0*/\
> + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0))
> /*SDRC_DQS1*/\
> + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0))
> /*SDRC_DQS2*/\
> + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0))
> /*SDRC_DQS3*/\
> + /*GPMC*/\
> + MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) /*GPMC_A1*/\
> + MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) /*GPMC_A2*/\
> + MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) /*GPMC_A3*/\
> + MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) /*GPMC_A4*/\
> + MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) /*GPMC_A5*/\
> + MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) /*GPMC_A6*/\
> + MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) /*GPMC_A7*/\
> + MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) /*GPMC_A8*/\
> + MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) /*GPMC_A9*/\
> + MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) /*GPMC_A10*/\
> + MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) /*GPMC_D0*/\
> + MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) /*GPMC_D1*/\
> + MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) /*GPMC_D2*/\
> + MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) /*GPMC_D3*/\
> + MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) /*GPMC_D4*/\
> + MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) /*GPMC_D5*/\
> + MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) /*GPMC_D6*/\
> + MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) /*GPMC_D7*/\
> + MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) /*GPMC_D8*/\
> + MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) /*GPMC_D9*/\
> + MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) /*GPMC_D10*/\
> + MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) /*GPMC_D11*/\
> + MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) /*GPMC_D12*/\
> + MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) /*GPMC_D13*/\
> + MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /*GPMC_D14*/\
> + MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /*GPMC_D15*/\
> + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0))
> /*GPMC_nCS0*/\
> +/* SB-T35 Ethernet */\
> + MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0))
> /*GPMC_nCS4*/\
> +/* CM-T35 Ethernet */\
> + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0))
> /*GPMC_nCS5*/\
> + MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)) /*GPIO_59*/\
> + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
> + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
> + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
> + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) /*GPMC_nBE0_CLE*/\
> + MUX_VAL(CP(GPMC_NBE1), (IDIS | PTD | DIS | M4)) /*GPIO_61*/\
> + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\
> + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\
> + /*DSS*/\
> + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
> + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0))
> /*DSS_HSYNC*/\
> + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0))
> /*DSS_VSYNC*/\
> + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
> + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0))
> /*DSS_DATA0*/\
> + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0))
> /*DSS_DATA1*/\
> + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0))
> /*DSS_DATA2*/\
> + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0))
> /*DSS_DATA3*/\
> + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0))
> /*DSS_DATA4*/\
> + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0))
> /*DSS_DATA5*/\
> + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0))
> /*DSS_DATA6*/\
> + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0))
> /*DSS_DATA7*/\
> + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0))
> /*DSS_DATA8*/\
> + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0))
> /*DSS_DATA9*/\
> + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
> + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
> + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
> + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
> + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
> + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
> + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
> + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
> + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
> + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
> + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
> + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
> + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
> + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
> + /*Serial Interface*/\
> + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\
> + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\
> + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\
> + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\
> + /*Control and debug */\
> + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\
> + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\
> + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\
> + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
> + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1*/\
> + MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M4)) /*green LED*/\
> + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\
> + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\
> + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\
> + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\
> + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0))
> /*sdrc_cke0*/\
> + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7))
> /*sdrc_cke1*/\
> +
> +#endif
> diff --git a/board/cm-t35/config.mk b/board/cm-t35/config.mk
> new file mode 100644
> index 0000000..6d1a511
> --- /dev/null
> +++ b/board/cm-t35/config.mk
> @@ -0,0 +1,30 @@
> +#
> +# (C) Copyright 2009
> +# CompuLab, Ltd., <www.compulab.co.il>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +# Physical Address:
> +# 8000'0000 (bank0)
> +#
> +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
> +# (mem base + reserved)
> +
> +# For use with external or internal boots.
> +TEXT_BASE = 0x80e80000
> \ No newline at end of file
> diff --git a/include/configs/omap3_cm-t35.h b/include/configs/omap3_cm-
> t35.h
> new file mode 100755
> index 0000000..0fbb62f
> --- /dev/null
> +++ b/include/configs/omap3_cm-t35.h
> @@ -0,0 +1,301 @@
> +/*
> + * (C) Copyright 2009 CompuLab, Ltd.
> + *
> + * Authors :
> + * Igor Vaisbein <igor at compulab.co.il>
> + * Mike Rapoport <mike at compulab.co.il>
> + *
> + * Derived from omap3evm and Beagle Board by
> + * Manikandan Pillai <mani.pillai at ti.com>
> + * Richard Woodruff <r-woodruff2 at ti.com>
> + * Syed Mohammed Khasim <x0khasim at ti.com>
> + *
> + * Configuration settings for the CompuLab CM-T35 board.
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +#include <asm/sizes.h>
Please take a look at the latest config files. We have got rid of this.
http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commit;h=9c44ddccb6602f620fc037974f3e4468ad8a7c0c
> +
> +/* High Level Configuration Options */
> +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */
> +#define CONFIG_OMAP 1 /* in a TI OMAP core */
> +#define CONFIG_OMAP34XX 1 /* which is a 34XX */
> +#define CONFIG_OMAP3430 1 /* which is in a 3430 */
> +#define CONFIG_CM_T35 1 /* working with CM_T35 */
> +
> +#include <asm/arch/cpu.h> /* get chip and board defs */
> +#include <asm/arch/omap3.h>
> +
> +#define CONFIG_DISPLAY_CPUINFO 1
> +#define CONFIG_DISPLAY_BOARDINFO 1
> +
> +/* Clock Defines */
> +#define V_OSCK 26000000 /* Clock output from T2 */
> +#define V_SCLK (V_OSCK >> 1)
> +
> +#undef CONFIG_USE_IRQ /* no support for IRQs */
> +#define CONFIG_MISC_INIT_R
> +
> +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
> +#define CONFIG_SETUP_MEMORY_TAGS 1
> +#define CONFIG_INITRD_TAG 1
> +#define CONFIG_REVISION_TAG 1
> +
> +/* Size of malloc() pool */
> +#define CONFIG_ENV_SIZE SZ_128K /* Total Size
> Environment */
> + /* Sector */
> +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_512K)
> +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */
> + /* initial data */
> +/* NS16550 Configuration */
> +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
> +
> +#define CONFIG_SYS_NS16550
> +#define CONFIG_SYS_NS16550_SERIAL
> +#define CONFIG_SYS_NS16550_REG_SIZE (-4)
> +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
> +
> +/* serial console configuration */
> +#define CONFIG_CONS_INDEX 3
> +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
> +#define CONFIG_SERIAL3 3 /* UART3 */
> +
> +/* allow to overwrite serial and ethaddr */
> +#define CONFIG_ENV_OVERWRITE
> +#define CONFIG_BAUDRATE 115200
> +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
> + 115200}
> +#define CONFIG_MMC 1
> +#define CONFIG_OMAP3_MMC 1
> +#define CONFIG_DOS_PARTITION 1
> +
> +/* commands to include */
> +#include <config_cmd_default.h>
> +
> +#define CONFIG_CMD_EXT2 /* EXT2 Support */
> +#define CONFIG_CMD_FAT /* FAT support */
> +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
> +#define CONFIG_CMD_YAFFS2 /* YAFFS2 Support */
> +#define CONFIG_CMD_UBI /* UBI Support */
> +#define CONFIG_CMD_MTDPARTS
> +
> +#define CONFIG_CMD_I2C /* I2C serial bus support */
> +#define CONFIG_CMD_MMC /* MMC support */
> +#define CONFIG_CMD_NAND /* NAND support */
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_PING
> +
> +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
> +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
> +#undef CONFIG_CMD_IMLS /* List all found images */
> +
> +#define CONFIG_SYS_NO_FLASH
> +
> +/* I2C */
> +#define CONFIG_SYS_I2C_SPEED 100000
> +#define CONFIG_SYS_I2C_SLAVE 1
> +#define CONFIG_SYS_I2C_BUS 0
> +#define CONFIG_SYS_I2C_BUS_SELECT 1
> +#define CONFIG_DRIVER_OMAP34XX_I2C 1
> +
> +/* TWL4030 */
> +#define CONFIG_TWL4030_POWER 1
> +
> +/* Board NAND Info. */
> +#define CONFIG_NAND_OMAP_GPMC 1
> +#define GPMC_NAND_ECC_LP_x8_LAYOUT 1
> +#define OMAP34XX_GPMC_NAND_SMNAND 1
> +
> +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
> + /* to access nand */
> +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
> + /* to access */
> + /* nand at CS0 */
> +
> +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
> + /* NAND devices */
> +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
> +
> +/* JFFS2 */
> +#define CONFIG_JFFS2_NAND
> +#define CONFIG_JFFS2_DEV "nand0"
> +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
> + CONFIG_SYS_MAX_NAND_DEVICE)
> +#define CONFIG_SYS_JFFS2_MEM_NAND
> +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
> +#define CONFIG_SYS_JFFS2_NUM_BANKS 1
> +
> +/* ubi/ubifs related definitions */
> +#define CONFIG_RBTREE
> +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
> +#define CONFIG_MTD_PARTITIONS
> +
> +/* Environment information */
> +#define CONFIG_BOOTDELAY 3
> +
> +#define CONFIG_BOOTFILE uImage
> +
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "loadaddr=0x82000000\0" \
> + "baudrate=115200\0"\
> + "console=ttyS2,115200n8\0" \
> + "autoload=no\0" \
> + "mmcargs=setenv bootargs console=${console} " \
> + "root=/dev/mmcblk0p2 rw " \
> + "rootfstype=ext3 rootwait\0" \
> + "nandargs=setenv bootargs console=${console} " \
> + "root=/dev/mtdblock4 rw " \
> + "rootfstype=jffs2\0" \
> + "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
> + "bootscript=echo Running bootscript from mmc ...; " \
> + "source ${loadaddr}\0" \
> + "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
> + "mmcboot=echo Booting from mmc ...; " \
> + "run mmcargs; " \
> + "bootm ${loadaddr}\0" \
> + "nandboot=echo Booting from nand ...; " \
> + "run nandargs; " \
> + "onenand read ${loadaddr} 280000 400000; " \
> + "bootm ${loadaddr}\0" \
> +
> +#define CONFIG_BOOTCOMMAND \
> + "if mmc init; then " \
> + "if run loadbootscript; then " \
> + "run bootscript; " \
> + "else " \
> + "if run loaduimage; then " \
> + "run mmcboot; " \
> + "else run nandboot; " \
> + "fi; " \
> + "fi; " \
> + "else run nandboot; fi"
> +
> +#define MTDIDS_DEFAULT "nand0=nand"
> +#define MTDPARTS_DEFAULT "mtdparts=nand:512k(xloader)," \
> + "1920k(u-boot)," \
> + "256k(env)," \
> + "4m(kernel)," \
> + "-(fs),"
> +
> +#define CONFIG_AUTO_COMPLETE 1
> +/*
> + * Miscellaneous configurable options
> + */
> +#define V_PROMPT "CM-T35 # "
> +
> +#define CONFIG_SYS_LONGHELP /* undef to save memory */
> +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
> +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
> +#define CONFIG_SYS_PROMPT V_PROMPT
> +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
> +
> +/* Print Buffer Size */
> +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
> + sizeof(CONFIG_SYS_PROMPT) + 16)
> +#define CONFIG_SYS_MAXARGS 16 /* max number of command */
> + /* args */
> +/* Boot Argument Buffer Size */
> +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
> +
> +/* memtest works on */
> +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x01000000)
> +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x08000000)
> +
> +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
> + /* address */
> +
> +/*
> + * OMAP3 has 12 GP timers, they can be driven by the system clock
> + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
> + * This rate is divided by a local divisor.
> + */
> +#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
> +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
> +#define CONFIG_SYS_HZ 1000
> +
> +/*
> + * Stack sizes
> + *
> + * The stack sizes are set up in start.S using the settings below
> + */
> +#define CONFIG_STACKSIZE SZ_128K /* regular stack */
> +#ifdef CONFIG_USE_IRQ
> +#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */
> +#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */
> +#endif
> +
> +/* Physical Memory Map */
> +#define CONFIG_NR_DRAM_BANKS 1 /* CS1 may not be populated on CM-T35
> */
> +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
> +#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */
> +
> +/* SDRAM Bank Allocation method */
> +#define SDRC_R_B_C 1
> +
> +/* PISMO support */
> +#define PISMO1_NAND_SIZE GPMC_SIZE_128M
> +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
> +
> +#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */
> + /* on one chip */
> +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
> +#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors
> */
> +
> +#define CONFIG_SYS_FLASH_BASE boot_flash_base
> +
> +/* Monitor at start of flash */
> +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
> +
> +#define CONFIG_ENV_IS_IN_NAND 1
> +
> +/* environment */
> +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
> +
> +#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
> +#define CONFIG_ENV_OFFSET boot_flash_off
> +#define CONFIG_ENV_ADDR boot_flash_env_addr
> +
> +#ifndef __ASSEMBLY__
> +extern struct gpmc *gpmc_cfg;
> +extern unsigned int boot_flash_base;
> +extern volatile unsigned int boot_flash_env_addr;
> +extern unsigned int boot_flash_off;
> +extern unsigned int boot_flash_sec;
> +extern unsigned int boot_flash_type;
> +#endif
> +
> +/* SMSC9220 Ethernet */
> +#if defined(CONFIG_CMD_NET)
> +#define CONFIG_NET_MULTI
> +#define CONFIG_SMC911X
> +#define CONFIG_SMC911X_32_BIT
> +#endif /* (CONFIG_CMD_NET) */
> +
> +/* BOOTP fields */
> +#define CONFIG_BOOTP_SUBNETMASK 0x00000001
> +#define CONFIG_BOOTP_GATEWAY 0x00000002
> +#define CONFIG_BOOTP_HOSTNAME 0x00000004
> +#define CONFIG_BOOTP_BOOTPATH 0x00000010
> +
> +#define CONFIG_OMAP3_GPIO_6 1
> +
> +#endif /* __CONFIG_H */
> --
> 1.6.0.6
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
More information about the U-Boot
mailing list