[U-Boot] [PATCH 2/2] OMAP3:SDRC: introduce DDR types

[Tom]

Paulraj, Sandeep wrote:
>>>> Introduce Micron DDR timings and provide
>>>> CONFIG_OMAP3_INFINEON_DDR and CONFIG_OMAP3_MICRON_DDR config
>>>> options to allow for platform files to setup their timings as
>>>> per the type of DDR selected
>>>>
>>>> Reported-by: Steve Sakoman in
>>>>
>> http://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page
>>>> =y
>>>>
>>>> Signed-off-by: Nishanth Menon <nm at ti.com>
>>>> ---
>>>>  include/asm-arm/arch-omap3/mem.h |   88
>> ++++++++++++++++++++++++++++++---
>>>> -----
>>>>  include/configs/devkit8000.h     |    3 +
>>>>  include/configs/omap3_beagle.h   |    3 +
>>>>  include/configs/omap3_evm.h      |    3 +
>>>>  include/configs/omap3_overo.h    |    3 +
>>>>  include/configs/omap3_pandora.h  |    3 +
>>>>  include/configs/omap3_sdp3430.h  |    3 +
>>>>  include/configs/omap3_zoom1.h    |    3 +
>>>>  include/configs/omap3_zoom2.h    |    3 +
>>>>  9 files changed, 94 insertions(+), 18 deletions(-)
>>>>
>>> Pushed to u-boot-ti/next
>>>
>>> I think this series from Nishanth needs some runtime tests.
>>> I believe Steve had some issues with his EVM not booting everytime due
>> to issues with DDR init.
>>> Thanks,
>>> Sandeep
>> Maybe it should go on the testing branch?
>>
>> I will give zoom2 a try..
>>
>> Tom
>>
> 
> Tom, Dirk, Steve,
> 
> Did u get a chance to try?
> 
> I am seeing a lot of OMAP3 patches which seem to be touching the above mentioned headers files.
> 
> Thanks,
> Sandeep
> 
> 
> 
For zoom2.
I warm booted the kernel with ti/next.
So it looks ok for zoom2
Tom