[U-Boot] [PATCH] ppc/85xx: Add PIB/ATM support for MPC8569mds

[Liu Yu]

Signed-off-by: Liu Yu <yu.liu at freescale.com>
---
 board/freescale/common/pq-mds-pib.c     |    2 +-
 board/freescale/mpc8569mds/mpc8569mds.c |    7 +++++++
 include/configs/MPC8569MDS.h            |    3 +++
 3 files changed, 11 insertions(+), 1 deletions(-)

diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c
index 6c72aa1..5f7a67d 100644
--- a/board/freescale/common/pq-mds-pib.c
+++ b/board/freescale/common/pq-mds-pib.c
@@ -63,7 +63,7 @@ int pib_init(void)
 #endif
 
 #if defined(CONFIG_PQ_MDS_PIB_ATM)
-#if defined(CONFIG_MPC8360EMDS)
+#if defined(CONFIG_MPC8360EMDS) || defined(CONFIG_MPC8569MDS)
 	val8 = 0;
 	i2c_write(0x20, 0x6, 1, &val8, 1);
 	i2c_write(0x20, 0x7, 1, &val8, 1);
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index cdd7813..02e6920 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -39,6 +39,9 @@
 #include <fsl_esdhc.h>
 
 #include "bcsr.h"
+#if defined(CONFIG_PQ_MDS_PIB)
+#include "../common/pq-mds-pib.h"
+#endif
 
 phys_size_t fixed_sdram(void);
 
@@ -542,6 +545,10 @@ pci_init_board(void)
 	r = hose->regions;
 	pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
 
+#if defined(CONFIG_PQ_MDS_PIB)
+	pib_init();
+#endif
+
 	if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
 		printf ("\n    PCIE connected to slot as %s (base address %x)",
 			pcie_ep ? "End Point" : "Root Complex",
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 17ea3bb..7462abb 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -44,6 +44,9 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
+#define CONFIG_PQ_MDS_PIB
+#define CONFIG_PQ_MDS_PIB_ATM
+
 /*
  * When initializing flash, if we cannot find the manufacturer ID,
  * assume this is the AMD flash associated with the MDS board.
-- 
1.6.4