[U-Boot] [PATCH 1/5] Introducing AM3517EVM support

[Hiremath, Vaibhav]

> -----Original Message-----
> From: Wolfgang Denk [mailto:wd at denx.de]
> Sent: Tuesday, November 24, 2009 1:13 AM
> To: Hiremath, Vaibhav
> Cc: u-boot at lists.denx.de
> Subject: Re: [U-Boot] [PATCH 1/5] Introducing AM3517EVM support
> 
> Dear hvaibhav at ti.com,
> 
> In message <1258974382-26568-1-git-send-email-hvaibhav at ti.com> you
> wrote:
> > From: Vaibhav Hiremath <hvaibhav at ti.com>
> >
> > Changes:-
> > 	- Added board specific directory under board/ti/am3517/
> > 	- Basic board support.
> >
> > Signed-off-by: Vaibhav Hiremath <hvaibhav at ti.com>
> > ---
> >  board/ti/am3517evm/Makefile      |   46 +++++
> >  board/ti/am3517evm/am3517evm.c   |   76 ++++++++
> >  board/ti/am3517evm/am3517evm.h   |  388
> ++++++++++++++++++++++++++++++++++++++
> >  board/ti/am3517evm/config.mk     |   29 +++
> >  include/asm-arm/arch-omap3/mem.h |   10 +
> >  5 files changed, 549 insertions(+), 0 deletions(-)
> >  create mode 100644 board/ti/am3517evm/Makefile
> >  create mode 100644 board/ti/am3517evm/am3517evm.c
> >  create mode 100644 board/ti/am3517evm/am3517evm.h
> >  create mode 100644 board/ti/am3517evm/config.mk
> ...
> > diff --git a/board/ti/am3517evm/am3517evm.h
> b/board/ti/am3517evm/am3517evm.h
> > new file mode 100644
> > index 0000000..7897912
> > --- /dev/null
> > +++ b/board/ti/am3517evm/am3517evm.h
> ...
> > +#define MUX_AM3517EVM() \
> > + /*SDRC*/\
> > + MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0))
> /*SDRC_D0*/\
> > + MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0))
> /*SDRC_D1*/\
> ...
> 
> Indentation by TAB, please.
> 
[Hiremath, Vaibhav] Ok, Will fix in next version.

Thanks,
Vaibhav
> 
> Best regards,
> 
> Wolfgang Denk
> 
> --
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev
> Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email:
> wd at denx.de
> There are no data that cannot be plotted on a straight  line  if
> the
> axis are chosen correctly.