[U-Boot] MPC8360ERDK and DP83848

[Ben Warren]

Hello Jon,

Jon.Gadsden at invensysrail.com wrote:
> The MPC8360ERDK from Freescale has both Broadcom 5481 and National DP83848 
> ethernet interfaces.  However the U-Boot supplied with the RDK only 
> supports the Broadcom 5481.  Has anybody got the National DP83848 
> interface working for U-Boot on this RDK?  In the U-Boot archives I can 
> only find references to the DP83848 driver for the A91RM9200 board.
>
>   
The UEC driver has support for a generic PHY.  It might 'just work'.
> Thanks, Jon
>
> --
> Jon Gadsden
> Embedded Software Engineer, 
> Vital Platforms Centre of Excellence
> Invensys Rail (UK), Chippenham
> Telephone: +44 (0) 1249 441407
> email: Jon.Gadsden at invensysrail.com
>
>
> Any files attached to this e-mail will have been checked with virus 
> detection software prior to transmission but you should carry out your own 
> virus check before opening any attachment. Invensys Rail does not accept 
> liability for any damage or loss which may be caused by software viruses. 
> This e-mail and any associated files are intended solely for the 
> individual or entity to whom they are addressed. Please do not copy it or 
> use it for any purposes, or disclose its contents to any other person. 
> Further, this e-mail and any associated files may be confidential and 
> further may be legally privileged.
>
> This email is from the Invensys Rail Limited business unit of Invensys plc 
> which is a company registered in England and Wales with its registered 
> office at Portland House, Bressenden Place, London, SW1E 5BF (Registered 
> number 166023). For a list of European legal entities within Invensys Rail 
> business group, please click here
>
> If you have received this e-mail in error, you are on notice of its 
> status. Please notify us immediately by reply e-mail and then delete this 
> message from your system. Thank you for your co-operation. You may contact 
> our Helpdesk on +44 (0)20 7821 3859 / 2105 or email 
> inet.hqhelpdesk at invensys.com
>
> This e-mail and any attachments thereto may be subject to the terms of any 
> agreements between Invensys (and/or its subsidiaries and affiliates) and 
> the recipient (and/or its subsidiaries and affiliates).
>   
>   
If you can strip this crap from your messages you'll make more friends

regards,
Ben