[U-Boot] [PATCH 2/2] OMAP3:SDRC: introduce DDR types

[Steve Sakoman]

On Sat, Nov 7, 2009 at 10:15 AM, Paulraj, Sandeep <s-paulraj at ti.com> wrote:
>
>> >>
>> >> Introduce Micron DDR timings and provide
>> >> CONFIG_OMAP3_INFINEON_DDR and CONFIG_OMAP3_MICRON_DDR config
>> >> options to allow for platform files to setup their timings as
>> >> per the type of DDR selected
>> >>
>> >> Reported-by: Steve Sakoman in
>> >>
>> http://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page
>> >> =y
>> >>
>> >> Signed-off-by: Nishanth Menon <nm at ti.com>
>> >> ---
>> >>  include/asm-arm/arch-omap3/mem.h |   88
>> ++++++++++++++++++++++++++++++---
>> >> -----
>> >>  include/configs/devkit8000.h     |    3 +
>> >>  include/configs/omap3_beagle.h   |    3 +
>> >>  include/configs/omap3_evm.h      |    3 +
>> >>  include/configs/omap3_overo.h    |    3 +
>> >>  include/configs/omap3_pandora.h  |    3 +
>> >>  include/configs/omap3_sdp3430.h  |    3 +
>> >>  include/configs/omap3_zoom1.h    |    3 +
>> >>  include/configs/omap3_zoom2.h    |    3 +
>> >>  9 files changed, 94 insertions(+), 18 deletions(-)
>> >>
>> >
>> > Pushed to u-boot-ti/next
>> >
>> > I think this series from Nishanth needs some runtime tests.
>> > I believe Steve had some issues with his EVM not booting everytime due
>> to issues with DDR init.
>> >
>> > Thanks,
>> > Sandeep
>>
>> Maybe it should go on the testing branch?
>>
>> I will give zoom2 a try..
>>
>> Tom
>>
> Nishanth has already tried on SDP 3430.
> I think the board that needs to be tried is overo.

Correct, it was Overo, though I suspect Beagle might have the same
issue since they use the same Micron POP memory.  I'll try to test
this weekend.

Steve