[U-Boot] [PATCH V2 3/3] Add support for the LaCie ED Mini V2 board
Albert Aribaud
albert.aribaud at free.fr
Sun Nov 15 00:03:16 CET 2009
This board is based on the Marvell Orion5x SoC.
Current support is limited to console and Flash.
Flash support uses LEGACY as the Macronix 29LV400
used on ED Mini V2 is not 100% CFI compliant.
Signed-off-by: Albert Aribaud <albert.aribaud at free.fr>
---
MAINTAINERS | 4 +
MAKEALL | 1 +
Makefile | 3 +
board/LaCie/edminiv2/Makefile | 54 +++++++++++++++
board/LaCie/edminiv2/config.mk | 27 +++++++
board/LaCie/edminiv2/edminiv2.c | 134 ++++++++++++++++++++++++++++++++++++
board/LaCie/edminiv2/edminiv2.h | 43 ++++++++++++
include/configs/edminiv2.h | 143 +++++++++++++++++++++++++++++++++++++++
8 files changed, 409 insertions(+), 0 deletions(-)
create mode 100644 board/LaCie/edminiv2/Makefile
create mode 100644 board/LaCie/edminiv2/config.mk
create mode 100644 board/LaCie/edminiv2/edminiv2.c
create mode 100644 board/LaCie/edminiv2/edminiv2.h
create mode 100644 include/configs/edminiv2.h
diff --git a/MAINTAINERS b/MAINTAINERS
index d70a9d2..93e57f5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -512,6 +512,10 @@ Unknown / orphaned boards:
# Board CPU #
#########################################################################
+Albert ARIBAUD <albert.aribaud at free.fr>
+
+ edminiv2 ARM926EJS (Orion5x SoC)
+
Rowel Atienza <rowel at diwalabs.com>
armadillo ARM720T
diff --git a/MAKEALL b/MAKEALL
index d63c5c2..f7b2a24 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -548,6 +548,7 @@ LIST_ARM9=" \
cp926ejs \
cp946es \
cp966 \
+ edminiv2 \
imx27lite \
lpd7a400 \
mv88f6281gtw_ge \
diff --git a/Makefile b/Makefile
index bcb3fe9..83b35b5 100644
--- a/Makefile
+++ b/Makefile
@@ -2951,6 +2951,9 @@ davinci_dm365evm_config : unconfig
davinci_dm6467evm_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
+edminiv2_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) LaCie orion5x
+
imx27lite_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
diff --git a/board/LaCie/edminiv2/Makefile b/board/LaCie/edminiv2/Makefile
new file mode 100644
index 0000000..6543da0
--- /dev/null
+++ b/board/LaCie/edminiv2/Makefile
@@ -0,0 +1,54 @@
+#
+# Copyright (C) 2009 Albert ARIBAUD <albrt.aribaud at free.fr>
+#
+# Based on original Kirkwood support which is
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla at marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := edminiv2.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/LaCie/edminiv2/config.mk b/board/LaCie/edminiv2/config.mk
new file mode 100644
index 0000000..9c725d3
--- /dev/null
+++ b/board/LaCie/edminiv2/config.mk
@@ -0,0 +1,27 @@
+#
+# Copyright (C) 2009 Albert ARIBAUD <albrt.aribaud at free.fr>
+#
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla at marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+TEXT_BASE = 0x00100000
diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c
new file mode 100644
index 0000000..2832860
--- /dev/null
+++ b/board/LaCie/edminiv2/edminiv2.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2009 Albert ARIBAUD <albrt.aribaud at free.fr>
+ *
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <asm/arch/orion5x.h>
+#include <asm/arch/mpp.h>
+#include "edminiv2.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * The ED Mini V2 is equipped with a Macronix MXLV400CB FLASH
+ * which CFI does not properly detect, hence the LEGACY config.
+ */
+#if defined(CONFIG_FLASH_CFI_LEGACY)
+#include <flash.h>
+ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
+{
+ int sectsz[] = CONFIG_SYS_FLASH_SECTSZ;
+ int sect;
+
+ if (base != CONFIG_SYS_FLASH_BASE)
+ return 0;
+
+ info->size = 0;
+ info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+ for (sect = 0; sect < CONFIG_SYS_MAX_FLASH_SECT; sect++) {
+ info->start[sect] = base+info->size;
+ info->size += sectsz[sect];
+ }
+ info->flash_id = 0x01000000;
+ info->portwidth = FLASH_CFI_8BIT;
+ info->chipwidth = FLASH_CFI_BY8;
+ info->buffer_size = 32;
+ info->erase_blk_tout = 1000;
+ info->write_tout = 10;
+ info->buffer_write_tout = 300;
+ info->vendor = CFI_CMDSET_AMD_LEGACY;
+ info->cmd_reset = 0xF0;
+ info->interface = FLASH_CFI_X8;
+ info->legacy_unlock = 0;
+ info->manufacturer_id = 0xC2;
+ info->device_id = 0xBA;
+ info->device_id2 = 0;
+ info->ext_addr = 0;
+ info->cfi_version = 0x3133;
+ info->cfi_offset = 0x0000;
+ info->addr_unlock1 = 0x00000aaa;
+ info->addr_unlock2 = 0x00000555;
+ info->name = "MX29LV400CB";
+
+ return 1;
+}
+#endif /* CONFIG_SYS_FLASH_CFI */
+
+int board_init(void)
+{
+ /*
+ * default gpio configuration
+ * There are maximum 26 gpios controlled through 2 sets of registers
+ * the below configuration configures mainly initial LED status
+ */
+ orion5x_config_gpio(EDMINIV2_OE_VAL, EDMINIV2_OE);
+
+ /* Multi-Purpose Pins Functionality configuration */
+ u32 edminiv2_mpp_config[] = {
+ MPP0_GPIO,
+ MPP1_GPIO,
+ MPP2_GPIO,
+ MPP3_GPIO,
+ MPP4_GPIO,
+ MPP5_GPIO,
+ MPP6_GPIO,
+ MPP7_GPIO,
+ MPP8_GPIO,
+ MPP9_GPIO,
+ MPP10_GPIO,
+ MPP11_GPIO,
+ MPP12_SATA0_PRESENTn,
+ MPP13_SATA1_PRESENTn,
+ MPP14_SATA0_ACTn,
+ MPP15_SATA1_ACTn,
+ MPP16_GPIO,
+ MPP17_GPIO,
+ MPP18_GPIO,
+ MPP19_GPIO,
+ 0
+ };
+ orion5x_mpp_conf(edminiv2_mpp_config);
+
+ /* arch number of board */
+ gd->bd->bi_arch_number = MACH_TYPE_EDMINI_V2;
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = orion5x_sdram_bar(0) + 0x100;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ int i;
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ gd->bd->bi_dram[i].start = orion5x_sdram_bar(i);
+ gd->bd->bi_dram[i].size = orion5x_sdram_bs(i);
+ }
+ return 0;
+}
+
diff --git a/board/LaCie/edminiv2/edminiv2.h b/board/LaCie/edminiv2/edminiv2.h
new file mode 100644
index 0000000..c725037
--- /dev/null
+++ b/board/LaCie/edminiv2/edminiv2.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2009 Albert ARIBAUD <albrt.aribaud at free.fr>
+ *
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __EDMINIV2_H
+#define __EDMINIV2_H
+
+/*
+ * GPIOs for LaCie ED Mini:
+ * GPIO3 is input (RTC interrupt)
+ * GPIO16 is Power LED control (0 = on, 1 = off)
+ * GPIO17 is Power LED source select (0 = CPLD, 1 = GPIO16)
+ * GPIO18 is Power Button status (0 = Released, 1 = Pressed)
+ *
+ * Default is LED ON
+ */
+
+#define EDMINIV2_OE 0xfffcffff
+#define EDMINIV2_OE_VAL 0x00020000
+
+#endif /* __EDMINIV2_H */
diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
new file mode 100644
index 0000000..31de164
--- /dev/null
+++ b/include/configs/edminiv2.h
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2009 Albert ARIBAUD <albert.aribaud at free.fr>
+ *
+ * Based on original Kirkwood support which is
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _CONFIG_EDMINIV2_H
+#define _CONFIG_EDMINIV2_H
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING " EDMiniV2"
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_MARVELL 1
+#define CONFIG_ARM926EJS 1 /* Basic Architecture */
+#define CONFIG_FEROCEON 1 /* CPU Core subversion */
+#define CONFIG_ORION5X 1 /* SOC Family Name */
+#define CONFIG_88F5182 1 /* SOC Name */
+#define CONFIG_MACH_EDMINIV2 1 /* Machine type */
+
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+
+/*
+ * CLKs configurations
+ */
+#define CONFIG_SYS_HZ 1000
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
+#define CONFIG_SYS_NS16550_COM1 ORION5X_UART0_BASE
+
+/*
+ * Serial Port configuration
+ * The following definitions let you select what serial you want to use
+ * for your console driver.
+ */
+
+#define CONFIG_CONS_INDEX 1 /*Console on UART0 */
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE \
+{ 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 }
+/*
+ * FLASH configuration
+ */
+
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_FLASH_CFI_WIDTH FLASH_CFI_8BIT
+#define CONFIG_FLASH_CFI_LEGACY
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 11 /* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_BASE 0xfff80000
+#define CONFIG_SYS_FLASH_SECTSZ \
+{16384, 8192, 8192, 32768, 65536, 65536, 65536, 65536, 65536, 65536, 65536}
+
+/* auto boot */
+#define CONFIG_BOOTDELAY 3 /* default enable autoboot */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */
+#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */
+
+#define CONFIG_SYS_PROMPT "EDMiniV2> " /* Command Prompt */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+ +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */
+/*
+ * Commands configuration - using default command set for now
+ */
+#include <config_cmd_default.h>
+/*
+ * Disabling some default commands for staggered bring-up
+ */
+#undef CONFIG_CMD_BOOTD /* no bootd since no net */
+#undef CONFIG_CMD_NET /* no net since no eth */
+#undef CONFIG_CMD_NFS /* no NFS since no net */
+
+/*
+ * Environment variables configurations
+ */
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_SECT_SIZE 0x2000 /* 16K */
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_OFFSET 0x4000 /* env starts here */
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (1024 * 128) /* 128kB for malloc() */
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+
+/*
+ * Other required minimal configurations
+ */
+#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */
+#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
+#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */
+#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
+#define CONFIG_NR_DRAM_BANKS 4
+#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */
+#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
+#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */
+#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */
+#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+
+#endif /* _CONFIG_EDMINIV2_H */
--
1.6.4.4
More information about the U-Boot
mailing list