[U-Boot] ARM pull request v3
Wolfgang Denk
wd at denx.de
Tue Oct 13 16:04:57 CEST 2009
Dear Tom Rix,
In message <4AD478AE.10302 at bumblecow.com> you wrote:
> Wolfgang,
>
> I have cleaned up the commits to arm/master-sync.
>
> The cleanup is from doing a
> git rev-list --reverse master..arm/master
> Then working back from my notes to take only the commits
> were either misc arm or other arm pull requests.
> These were cherry picked on top of the current u-boot/master.
>
> I ran the MAKEALL regression and the results look like
> what I posted on Sunday.
>
> That said, it would be a good idea to wait a bit for others to
> review this list and pick up on anything that I missed.
>
> I will be offline for about 10hrs and will fix any problems
> then.
>
> Tom
>
> The following changes since commit 14abfe361b3ed23b02f564e2f5d663e158cd5799:
> Wolfgang Denk (1):
> Merge branch 'master' of /home/wd/git/u-boot/custodians
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master-sync
>
> Daniel Gorsulowski (1):
> at91: Update MEESC board support
>
> Dirk Behme (1):
> OMAP3 MMC: Fix warning dereferencing type-punned pointer
>
> Olof Johansson (3):
> OMAP3: Clean up whitespace in mux configs
> SMC911X: Add chip auto detection
> TI: OMAP3: Overo Tobi ethernet support
>
> Prafulla Wadaskar (2):
> Kirkwood: rd6281a: Add kwbimage build support
> Kirkwood: mv88f6281gtw_ge: Add kwbimage build support
>
> Sandeep Paulraj (9):
> TI DaVinci: Remove references to SZ_xx
> TI DaVinci: DM6446: Fix Compilation error in NAND mode
> TI DaVinci: DM646x: Initial Support for DM646x SOC
> TI DaVinci: DM355: Config Cleanup and Update
> TI DaVinci DM365: Removing header file which does not exist
> TI: DaVinci DM365: Minor config cleanup
> TI: DaVinci DM646x: Update flag used to represent DM646x SOC's
> TI: DaVinci: GPIO header file and definitions
> TI: DaVinci DM365: Enabling network Support on DM365 EVM
>
> Simon Kagstrom (2):
> Support for the OpenRD base board
> arm: Correct build with CONFIG_SYS_HUSH_PARSER set
>
> Tom Rix (4):
> OMAP3 Move cache routine to cache.S
> Add support for Eukrea CPUAT91 SBC
> Add support for Eukrea CPU9260/CPU9G20 SBC
> TI OMAP3 Use arm init sequence to initialize i2c
>
> MAINTAINERS | 10 +
> MAKEALL | 6 +-
> Makefile | 17 +
> board/Marvell/mv88f6281gtw_ge/config.mk | 3 +
> board/Marvell/mv88f6281gtw_ge/kwbimage.cfg | 165 +++++++
> board/Marvell/openrd_base/Makefile | 56 +++
> board/Marvell/openrd_base/config.mk | 33 ++
> board/Marvell/openrd_base/kwbimage.cfg | 168 +++++++
> board/Marvell/openrd_base/openrd_base.c | 160 +++++++
> board/Marvell/openrd_base/openrd_base.h | 46 ++
> board/Marvell/rd6281a/config.mk | 3 +
> board/Marvell/rd6281a/kwbimage.cfg | 167 +++++++
> board/davinci/dm365evm/dm365evm.c | 44 ++-
> board/esd/meesc/meesc.c | 65 +++-
> board/eukrea/cpu9260/Makefile | 59 +++
> board/eukrea/cpu9260/config.mk | 1 +
> board/eukrea/cpu9260/cpu9260.c | 220 +++++++++
> board/eukrea/cpu9260/led.c | 153 +++++++
> board/eukrea/cpuat91/Makefile | 50 +++
> board/eukrea/cpuat91/config.mk | 1 +
> board/eukrea/cpuat91/cpuat91.c | 81 ++++
> board/logicpd/zoom1/zoom1.h | 164 ++++----
> board/logicpd/zoom2/zoom2.h | 188 ++++----
> board/overo/overo.c | 59 +++
> board/overo/overo.h | 645
> ++++++++++++++--------------
> board/pandora/pandora.h | 662
> ++++++++++++++--------------
> board/ti/beagle/beagle.h | 640
> ++++++++++++++--------------
> board/ti/evm/evm.h | 662
> ++++++++++++++--------------
> board/timll/devkit8000/devkit8000.h | 628
> +++++++++++++-------------
> cpu/arm920t/at91rm9200/Makefile | 5 +-
> cpu/arm920t/at91rm9200/ks8721.c | 249 +++++++++++
> cpu/arm926ejs/at91/lowlevel_init.S | 3 +-
> cpu/arm926ejs/davinci/Makefile | 1 +
> cpu/arm926ejs/davinci/dm646x.c | 41 ++
> cpu/arm926ejs/kirkwood/cpu.c | 1 +
> cpu/arm_cortexa8/cpu.c | 2 +-
> cpu/arm_cortexa8/omap3/Makefile | 2 +-
> cpu/arm_cortexa8/omap3/board.c | 2 +-
> cpu/arm_cortexa8/omap3/cache.S | 191 ++++++++
> cpu/arm_cortexa8/omap3/cache.c | 95 ----
> cpu/arm_cortexa8/start.S | 85 ----
> drivers/mmc/omap3_mmc.c | 48 +--
> drivers/net/smc911x.c | 14 +-
> drivers/net/smc911x.h | 7 +-
> include/asm-arm/arch-davinci/emac_defs.h | 4 +-
> include/asm-arm/arch-davinci/gpio_defs.h | 53 +++
> include/asm-arm/arch-davinci/hardware.h | 11 +
> include/asm-arm/arch-davinci/nand_defs.h | 2 +-
> include/asm-arm/arch-omap3/mmc.h | 7 +
> include/asm-arm/arch-omap3/omap3.h | 2 +
> include/asm-arm/arch-omap3/sys_proto.h | 2 +-
> include/configs/cpu9260.h | 453 +++++++++++++++++++
> include/configs/cpuat91.h | 228 ++++++++++
> include/configs/davinci_dm355evm.h | 26 +-
> include/configs/davinci_dm365evm.h | 11 +-
> include/configs/davinci_dvevm.h | 6 +-
> include/configs/davinci_schmoogie.h | 3 +-
> include/configs/davinci_sffsdr.h | 3 +-
> include/configs/davinci_sonata.h | 3 +-
> include/configs/devkit8000.h | 1 +
> include/configs/meesc.h | 25 +-
> include/configs/omap3_beagle.h | 1 +
> include/configs/omap3_evm.h | 1 +
> include/configs/omap3_overo.h | 18 +-
> include/configs/omap3_pandora.h | 1 +
> include/configs/omap3_zoom1.h | 1 +
> include/configs/omap3_zoom2.h | 1 +
> include/configs/openrd_base.h | 220 +++++++++
> include/ks8721.h | 78 ++++
> 69 files changed, 4988 insertions(+), 2075 deletions(-)
> create mode 100644 board/Marvell/mv88f6281gtw_ge/kwbimage.cfg
> create mode 100644 board/Marvell/openrd_base/Makefile
> create mode 100644 board/Marvell/openrd_base/config.mk
> create mode 100644 board/Marvell/openrd_base/kwbimage.cfg
> create mode 100644 board/Marvell/openrd_base/openrd_base.c
> create mode 100644 board/Marvell/openrd_base/openrd_base.h
> create mode 100644 board/Marvell/rd6281a/kwbimage.cfg
> create mode 100644 board/eukrea/cpu9260/Makefile
> create mode 100644 board/eukrea/cpu9260/config.mk
> create mode 100644 board/eukrea/cpu9260/cpu9260.c
> create mode 100644 board/eukrea/cpu9260/led.c
> create mode 100644 board/eukrea/cpuat91/Makefile
> create mode 100644 board/eukrea/cpuat91/config.mk
> create mode 100644 board/eukrea/cpuat91/cpuat91.c
> create mode 100644 cpu/arm920t/at91rm9200/ks8721.c
> create mode 100644 cpu/arm926ejs/davinci/dm646x.c
> create mode 100644 cpu/arm_cortexa8/omap3/cache.S
> delete mode 100644 cpu/arm_cortexa8/omap3/cache.c
> create mode 100644 include/asm-arm/arch-davinci/gpio_defs.h
> create mode 100644 include/configs/cpu9260.h
> create mode 100644 include/configs/cpuat91.h
> create mode 100644 include/configs/openrd_base.h
> create mode 100644 include/ks8721.h
Thanks. Applied locally. Will run some build tests and then push it
out.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
After a heated argument on some trivial matter Nancy [Astor] . . .
shouted, ``If I were your wife I would put poison in your coffee!''
Whereupon Winston Churchill with equal heat and sincerity answered,
``And if I were your husband I would drink it.''
More information about the U-Boot
mailing list