[U-Boot] ARM pull request v3
Paulraj, Sandeep
s-paulraj at ti.com
Tue Oct 13 16:40:43 CEST 2009
>
> Dear Tom Rix,
>
> In message <4AD478AE.10302 at bumblecow.com> you wrote:
> > Wolfgang,
> >
> > I have cleaned up the commits to arm/master-sync.
> >
> > The cleanup is from doing a
> > git rev-list --reverse master..arm/master
> > Then working back from my notes to take only the commits
> > were either misc arm or other arm pull requests.
> > These were cherry picked on top of the current u-boot/master.
> >
> > I ran the MAKEALL regression and the results look like
> > what I posted on Sunday.
> >
> > That said, it would be a good idea to wait a bit for others to
> > review this list and pick up on anything that I missed.
> >
> > I will be offline for about 10hrs and will fix any problems
> > then.
> >
> > Tom
> >
> > The following changes since commit
> 14abfe361b3ed23b02f564e2f5d663e158cd5799:
> > Wolfgang Denk (1):
> > Merge branch 'master' of /home/wd/git/u-boot/custodians
> >
> > are available in the git repository at:
> >
> > git://git.denx.de/u-boot-arm master-sync
> >
> > Daniel Gorsulowski (1):
> > at91: Update MEESC board support
> >
> > Dirk Behme (1):
> > OMAP3 MMC: Fix warning dereferencing type-punned pointer
> >
> > Olof Johansson (3):
> > OMAP3: Clean up whitespace in mux configs
> > SMC911X: Add chip auto detection
> > TI: OMAP3: Overo Tobi ethernet support
> >
> > Prafulla Wadaskar (2):
> > Kirkwood: rd6281a: Add kwbimage build support
> > Kirkwood: mv88f6281gtw_ge: Add kwbimage build support
> >
> > Sandeep Paulraj (9):
> > TI DaVinci: Remove references to SZ_xx
> > TI DaVinci: DM6446: Fix Compilation error in NAND mode
> > TI DaVinci: DM646x: Initial Support for DM646x SOC
> > TI DaVinci: DM355: Config Cleanup and Update
> > TI DaVinci DM365: Removing header file which does not exist
> > TI: DaVinci DM365: Minor config cleanup
> > TI: DaVinci DM646x: Update flag used to represent DM646x SOC's
> > TI: DaVinci: GPIO header file and definitions
> > TI: DaVinci DM365: Enabling network Support on DM365 EVM
> >
> > Simon Kagstrom (2):
> > Support for the OpenRD base board
> > arm: Correct build with CONFIG_SYS_HUSH_PARSER set
> >
> > Tom Rix (4):
> > OMAP3 Move cache routine to cache.S
> > Add support for Eukrea CPUAT91 SBC
> > Add support for Eukrea CPU9260/CPU9G20 SBC
> > TI OMAP3 Use arm init sequence to initialize i2c
> >
> > MAINTAINERS | 10 +
> > MAKEALL | 6 +-
> > Makefile | 17 +
> > board/Marvell/mv88f6281gtw_ge/config.mk | 3 +
> > board/Marvell/mv88f6281gtw_ge/kwbimage.cfg | 165 +++++++
> > board/Marvell/openrd_base/Makefile | 56 +++
> > board/Marvell/openrd_base/config.mk | 33 ++
> > board/Marvell/openrd_base/kwbimage.cfg | 168 +++++++
> > board/Marvell/openrd_base/openrd_base.c | 160 +++++++
> > board/Marvell/openrd_base/openrd_base.h | 46 ++
> > board/Marvell/rd6281a/config.mk | 3 +
> > board/Marvell/rd6281a/kwbimage.cfg | 167 +++++++
> > board/davinci/dm365evm/dm365evm.c | 44 ++-
> > board/esd/meesc/meesc.c | 65 +++-
> > board/eukrea/cpu9260/Makefile | 59 +++
> > board/eukrea/cpu9260/config.mk | 1 +
> > board/eukrea/cpu9260/cpu9260.c | 220 +++++++++
> > board/eukrea/cpu9260/led.c | 153 +++++++
> > board/eukrea/cpuat91/Makefile | 50 +++
> > board/eukrea/cpuat91/config.mk | 1 +
> > board/eukrea/cpuat91/cpuat91.c | 81 ++++
> > board/logicpd/zoom1/zoom1.h | 164 ++++----
> > board/logicpd/zoom2/zoom2.h | 188 ++++----
> > board/overo/overo.c | 59 +++
> > board/overo/overo.h | 645
> > ++++++++++++++--------------
> > board/pandora/pandora.h | 662
> > ++++++++++++++--------------
> > board/ti/beagle/beagle.h | 640
> > ++++++++++++++--------------
> > board/ti/evm/evm.h | 662
> > ++++++++++++++--------------
> > board/timll/devkit8000/devkit8000.h | 628
> > +++++++++++++-------------
> > cpu/arm920t/at91rm9200/Makefile | 5 +-
> > cpu/arm920t/at91rm9200/ks8721.c | 249 +++++++++++
> > cpu/arm926ejs/at91/lowlevel_init.S | 3 +-
> > cpu/arm926ejs/davinci/Makefile | 1 +
> > cpu/arm926ejs/davinci/dm646x.c | 41 ++
> > cpu/arm926ejs/kirkwood/cpu.c | 1 +
> > cpu/arm_cortexa8/cpu.c | 2 +-
> > cpu/arm_cortexa8/omap3/Makefile | 2 +-
> > cpu/arm_cortexa8/omap3/board.c | 2 +-
> > cpu/arm_cortexa8/omap3/cache.S | 191 ++++++++
> > cpu/arm_cortexa8/omap3/cache.c | 95 ----
> > cpu/arm_cortexa8/start.S | 85 ----
> > drivers/mmc/omap3_mmc.c | 48 +--
> > drivers/net/smc911x.c | 14 +-
> > drivers/net/smc911x.h | 7 +-
> > include/asm-arm/arch-davinci/emac_defs.h | 4 +-
> > include/asm-arm/arch-davinci/gpio_defs.h | 53 +++
> > include/asm-arm/arch-davinci/hardware.h | 11 +
> > include/asm-arm/arch-davinci/nand_defs.h | 2 +-
> > include/asm-arm/arch-omap3/mmc.h | 7 +
> > include/asm-arm/arch-omap3/omap3.h | 2 +
> > include/asm-arm/arch-omap3/sys_proto.h | 2 +-
> > include/configs/cpu9260.h | 453 +++++++++++++++++++
> > include/configs/cpuat91.h | 228 ++++++++++
> > include/configs/davinci_dm355evm.h | 26 +-
> > include/configs/davinci_dm365evm.h | 11 +-
> > include/configs/davinci_dvevm.h | 6 +-
> > include/configs/davinci_schmoogie.h | 3 +-
> > include/configs/davinci_sffsdr.h | 3 +-
> > include/configs/davinci_sonata.h | 3 +-
> > include/configs/devkit8000.h | 1 +
> > include/configs/meesc.h | 25 +-
> > include/configs/omap3_beagle.h | 1 +
> > include/configs/omap3_evm.h | 1 +
> > include/configs/omap3_overo.h | 18 +-
> > include/configs/omap3_pandora.h | 1 +
> > include/configs/omap3_zoom1.h | 1 +
> > include/configs/omap3_zoom2.h | 1 +
> > include/configs/openrd_base.h | 220 +++++++++
> > include/ks8721.h | 78 ++++
> > 69 files changed, 4988 insertions(+), 2075 deletions(-)
> > create mode 100644 board/Marvell/mv88f6281gtw_ge/kwbimage.cfg
> > create mode 100644 board/Marvell/openrd_base/Makefile
> > create mode 100644 board/Marvell/openrd_base/config.mk
> > create mode 100644 board/Marvell/openrd_base/kwbimage.cfg
> > create mode 100644 board/Marvell/openrd_base/openrd_base.c
> > create mode 100644 board/Marvell/openrd_base/openrd_base.h
> > create mode 100644 board/Marvell/rd6281a/kwbimage.cfg
> > create mode 100644 board/eukrea/cpu9260/Makefile
> > create mode 100644 board/eukrea/cpu9260/config.mk
> > create mode 100644 board/eukrea/cpu9260/cpu9260.c
> > create mode 100644 board/eukrea/cpu9260/led.c
> > create mode 100644 board/eukrea/cpuat91/Makefile
> > create mode 100644 board/eukrea/cpuat91/config.mk
> > create mode 100644 board/eukrea/cpuat91/cpuat91.c
> > create mode 100644 cpu/arm920t/at91rm9200/ks8721.c
> > create mode 100644 cpu/arm926ejs/davinci/dm646x.c
> > create mode 100644 cpu/arm_cortexa8/omap3/cache.S
> > delete mode 100644 cpu/arm_cortexa8/omap3/cache.c
> > create mode 100644 include/asm-arm/arch-davinci/gpio_defs.h
> > create mode 100644 include/configs/cpu9260.h
> > create mode 100644 include/configs/cpuat91.h
> > create mode 100644 include/configs/openrd_base.h
> > create mode 100644 include/ks8721.h
>
> Thanks. Applied locally. Will run some build tests and then push it
> out.
Wolfgang,
I want to let you know that there will probably be some compilation warnings. These are patches for these. These have been sent to the list and ACK'ed by Tom and currently in my master. This will be part of my next pull request.
This pull request of mine will hopefully be the last for 2009.11.
Sandeep
>
> Best regards,
>
> Wolfgang Denk
More information about the U-Boot
mailing list