[U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR

Thiago A. Corrêa thiago.correa at gmail.com
Tue Sep 1 16:49:49 CEST 2009


Hi,

   I don't want to intrude too much into the discussion, but I would
like to offer a small bit of info

On Tue, Sep 1, 2009 at 10:23 AM, Haavard
Skinnemoen<haavard.skinnemoen at atmel.com> wrote:
>> It would be a good idea to clean up this board  support,  remove  the
>> proprietary  flash driver and use the CFI driver instead. Patches are
>> welcome.
>
> You must be joking. Replacing a working driver with a broken one? Why
> the hell would anyone do that?
>

My custom board uses AT49BV640D. I wen't thru a lot of trouble getting
u-boot to work with it. And one of my attempts was to use the "working
driver" from stk1000 and it didn't work. On the other hand, the CFI
driver with the tripple revert that Haavard proposed did. I'm
currently patching it like that so I can continue my development,
while people with much more knowleadge than I have on u-boot code
could fix the issue, but looks like I'm about to get orphan on u-boot
and Atmel.

Kind Regards,
    Thiago A. Correa


More information about the U-Boot mailing list