September 2009 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Sep 1 03:41:42 CEST 2009
Ending: Wed Sep 30 23:51:21 CEST 2009
Messages: 2148

• [U-Boot] Does u-boot have support for a usb-ethernet adapter:   Harsh Goel (RBEI/ECB4)
• [U-Boot] ..$... 邀請 ...$..   101site
• [U-Boot] [PATCH][v1] ppc/85xx,86xx: Handling Unknown SOC version   Poonam Aggrwal
• [U-Boot] [PATCH][v2] ppc/85xx,86xx: Handling Unknown SOC version   Poonam Aggrwal
• [U-Boot] [PATCH][v1] ppc/85x/86xxx: Device tree fixup for number of cores   Poonam Aggrwal
• [U-Boot] [PATCH][v1] ppc/85xx/86xx: Bug fix: call to puts in probecpu() moved to checkcpu().   Poonam Aggrwal
• [U-Boot] [PATCH][v1] ppc/85xx: 32bit DDR changes for P1020/P1011   Poonam Aggrwal
• [U-Boot] [PATCH] mx27ads: add support for iMX27ADS board from Freescale   Alan Carvalho de Assis
• [U-Boot] [PATCH v2] mx27ads: add support for iMX27ADS board from Freescale   Alan Carvalho de Assis
• [U-Boot] [PATCH v2] mx27ads: add support for iMX27ADS board from Freescale   Alan Carvalho de Assis
• [U-Boot] [PATCH v2] mx27ads: add support for iMX27ADS board from Freescale   Alan Carvalho de Assis
• [U-Boot] [PATCH v2] mx27ads: add support for iMX27ADS board from Freescale   Alan Carvalho de Assis
• [U-Boot] Subject: [PATCH v3] mx27ads: add support for iMX27ADS board from Freescale   Alan Carvalho de Assis
• [U-Boot] [PATCH v2] mx27ads: add support for iMX27ADS board from Freescale   Alan Carvalho de Assis
• [U-Boot] Subject: [PATCH v3] mx27ads: add support for iMX27ADS board from Freescale   Alan Carvalho de Assis
• [U-Boot] I am maintainer of Freescale i.MX   Alan Carvalho de Assis
• [U-Boot] Uboot 1.1.3 and USB   Stephen Banville
• [U-Boot] I2c imd/imw for a digital potentiometer?   Jerry Van Baren
• [U-Boot] Is there any full story about how to take advantage FDT function ?   Jerry Van Baren
• [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Jerry Van Baren
• [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Jerry Van Baren
• [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Jerry Van Baren
• [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Jerry Van Baren
• [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Jerry Van Baren
• [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Jerry Van Baren
• [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Jerry Van Baren
• [U-Boot] [PATCH v2] cmd_fdt.c: fix parse of byte streams and strings   Jerry Van Baren
• [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Jerry Van Baren
• [U-Boot] [PATCH 1/7] fdt_support: Add multi-serial support for stdout fixup   Jerry Van Baren
• [U-Boot] [PATCH 1/7] fdt_support: Add multi-serial support for stdout fixup   Jerry Van Baren
• [U-Boot] Compile for SPARC Leon3 fails with *** No rule to make target ... ***   Jerry Van Baren
• [U-Boot] [PATCH 1/3 v3] Bit-banged MII driver with multi-bus support.   Jerry Van Baren
• [U-Boot] Pull request: u-boot-fdt   Jerry Van Baren
• [U-Boot] Broken board: mpc5121ads   Jerry Van Baren
• [U-Boot] mips board with no output from console   Jerry Van Baren
• [U-Boot] mips board with no output from console   Jerry Van Baren
• [U-Boot] Large Block USB Flash Drive Problem   Barnes, Clifton A.
• [U-Boot] ARM preprocessor error generating assembly dependencies   Dirk Behme
• [U-Boot] ARM preprocessor error generating assembly dependencies   Dirk Behme
• [U-Boot] ARM preprocessor error generating assembly dependencies   Dirk Behme
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Dirk Behme
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Dirk Behme
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Dirk Behme
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Dirk Behme
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Dirk Behme
• [U-Boot] [Fwd: Newest Version U-boot]   Dirk Behme
• [U-Boot] Starting compressed win CE kernel   Dirk Behme
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Dirk Behme
• [U-Boot] [PATCH] Add support for the DevKit8000 board   Dirk Behme
• [U-Boot] ARM Pull Request   Dirk Behme
• [U-Boot] USB device support for OMAP3   Dirk Behme
• [U-Boot] RFC: split ARM repo and distribute workload   Dirk Behme
• [U-Boot] ARM Pull Request   Dirk Behme
• [U-Boot] Warning in omap3_mmc.c   Dirk Behme
• [U-Boot] ARM Pull Request   Dirk Behme
• [U-Boot] ARM Pull Request   Dirk Behme
• [U-Boot] ARM Pull Request   Dirk Behme
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Dirk Behme
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Dirk Behme
• [U-Boot] Why Cache flush required in some ARM Cortex boards to enable D cache?   Dirk Behme
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Dirk Behme
• [U-Boot] [PATCH] OMAP3 MMC: Fix warning dereferencing type-punned pointer   Dirk Behme
• [U-Boot] [PATCH] OMAP3 Overo: Fix ethernet related warnings   Dirk Behme
• [U-Boot] OMAP3, RFBI, splash screen   Dirk Behme
• [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Dirk Behme
• [U-Boot] [PATCH v2] OMAP3 MMC: Fix warning dereferencing type-punned pointer   Dirk Behme
• [U-Boot] [PATCH] OMAP3: Update Overo and Beagle environment   Dirk Behme
• [U-Boot] [PATCH] OMAP3: Update Overo and Beagle environment   Dirk Behme
• [U-Boot] [PATCH v2] OMAP3 MMC: Fix warning dereferencing type-punned pointer   Dirk Behme
• [U-Boot] [PATCH 1/1] TI OMAP3 Use arm init sequence to initialize i2c   Dirk Behme
• [U-Boot] smc911x runtime detection (was: TI: OMAP3: Overo Tobi ethernet support)   Dirk Behme
• [U-Boot] [PATCH] OMAP3: Clean up whitespace in mux configs   Dirk Behme
• [U-Boot] smc911x runtime detection   Dirk Behme
• [U-Boot] [PATCH v3] OMAP3 MMC: Fix warning dereferencing type-punned pointer   Dirk Behme
• [U-Boot] [PATCH 1/1] TI OMAP3 Use arm init sequence to initialize i2c   Dirk Behme
• [U-Boot] Applying u-boot-ti patches (was: [PATCH v2] TI: OMAP3: Overo Tobi ethernet support)   Dirk Behme
• [U-Boot] Applying u-boot-ti patches   Dirk Behme
• [U-Boot] [PATCH 1/1] TI OMAP3 Use arm init sequence to initialize i2c   Dirk Behme
• [U-Boot] [PATCH] Add support for Eukrea CPU9260/CPU9G20 SBC   Eric Benard
• [U-Boot] autoscr command failure saveenv dataflash   Berns
• [U-Boot] Large Block USB Flash Drive Problem   Remy Bohmer
• [U-Boot] [PATCH] usb: musb: add support for Blackfin MUSB   Remy Bohmer
• [U-Boot] RFC USB composite devices   Remy Bohmer
• [U-Boot] USB 3.0 support in u-boot?   Remy Bohmer
• [U-Boot] Does u-boot have support for a usb-ethernet adapter:   Remy Bohmer
• [U-Boot] RFC USB composite devices   Remy Bohmer
• [U-Boot] V2 of OMAP3 USB device Support   Remy Bohmer
• [U-Boot] RFC USB composite devices   Remy Bohmer
• [U-Boot] Executing uboot from FLASH   Mike Breneman
• [U-Boot] Executing uboot from FLASH   Mike Breneman
• [U-Boot] More davinci 4-bit hw ecc questions   David Brownell
• [U-Boot] More davinci 4-bit hw ecc questions   David Brownell
• [U-Boot] Virtual addresses, u-boot, and the MMU   Becky Bruce
• [U-Boot] [PATCH] Add support for Eukrea CPU9260/CPU9G20 SBC   Eric Bénard
• [U-Boot] AT91 pending patches   Eric Bénard
• [U-Boot] [PATCH] zlib: fix code when DEBUG is defined   Giuseppe CONDORELLI
• [U-Boot] [PATCH v2] zlib: fix code when DEBUG is defined   Giuseppe CONDORELLI
• [U-Boot] [PATCH v2] zlib: fix code when DEBUG is defined   Giuseppe CONDORELLI
• [U-Boot] [PATCH v3] zlib: fix code when DEBUG is defined   Giuseppe CONDORELLI
• [U-Boot] Virtual addresses, u-boot, and the MMU   J. William Campbell
• [U-Boot] Virtual addresses, u-boot, and the MMU   J. William Campbell
• [U-Boot] Virtual addresses, u-boot, and the MMU   J. William Campbell
• [U-Boot] U-Boot load and run via NAND flash - ARM926EJ-S   N Cheung
• [U-Boot] AT91 SD/MMC Patches   Dan Christensen
• [U-Boot] [PATCH v6 2/2] arm: A320: Add support for Faraday A320 evaluation board   Po-Yu Chuang
• [U-Boot] [PATCH v6 1/2 resend] arm: A320: driver for FTRTC010 real time clock   Po-Yu Chuang
• [U-Boot] [PATCH v6 2/2 resend] arm: A320: Add support for Faraday A320 evaluation board   Po-Yu Chuang
• [U-Boot] [help] is there anything wrong with my previously sent A320 patches?   Po-Yu Chuang
• [U-Boot] [PATCH v7 1/2] arm: A320: driver for FTRTC010 real time clock   Po-Yu Chuang
• [U-Boot] [PATCH v7 2/2] arm: A320: Add support for Faraday A320 evaluation board   Po-Yu Chuang
• [U-Boot] [help] is there anything wrong with my previously sent A320 patches?   Po-Yu Chuang
• [U-Boot] build failure on denx top   Po-Yu Chuang
• [U-Boot] [PATCH MAKEALL coldfire] : Fix start.S:Error: Conversionof PC relative displacement to absolute   Liew Tsi Chung-R5AAHP
• [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Thiago A. Corrêa
• [U-Boot] Newest Version U-boot   Marcos Cunha
• [U-Boot] [Fwd: Newest Version U-boot]   Marcos Cunha
• [U-Boot] [Fwd: Newest Version U-boot]   Marcos Cunha
• [U-Boot] [Fwd: Newest Version U-boot]   Marcos Cunha
• [U-Boot] [Fwd: Newest Version U-boot]   Marcos Cunha
• [U-Boot] SD Card in Spi mode boot mpc8315   Marcos Cunha
• [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Liu Dave-R63238
• [U-Boot] invalid core multipliers?   Kári Davíðsson
• [U-Boot] ARM preprocessor error generating assembly dependencies   Wolfgang Denk
• [U-Boot] ARM preprocessor error generating assembly dependencies   Wolfgang Denk
• [U-Boot] [PATCH] add Matrix Vision specific dir for common code.   Wolfgang Denk
• [U-Boot] how to enable various command support in u-boot-1.3.4?   Wolfgang Denk
• [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Wolfgang Denk
• [U-Boot] how to enable various command support in u-boot-1.3.4?   Wolfgang Denk
• [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Wolfgang Denk
• [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Wolfgang Denk
• [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Wolfgang Denk
• [U-Boot] API License Terms   Wolfgang Denk
• [U-Boot] [PATCH 1/2] Move uninitialized_var() macro from ubi_uboot.h to compiler.h   Wolfgang Denk
• [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Wolfgang Denk
• [U-Boot] Virtual addresses, u-boot, and the MMU   Wolfgang Denk
• [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Wolfgang Denk
• [U-Boot] [PATCH 1/2] Move uninitialized_var() macro from ubi_uboot.h to compiler.h   Wolfgang Denk
• [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Wolfgang Denk
• [U-Boot] [PATCH][v1] ppc/85xx, 86xx: Handling Unknown SOC version   Wolfgang Denk
• [U-Boot] how to enable various command support in u-boot-1.3.4?   Wolfgang Denk
• [U-Boot] Virtual addresses, u-boot, and the MMU   Wolfgang Denk
• [U-Boot] [PATCH] TQM85xx: enable partition support, sort commands   Wolfgang Denk
• [U-Boot] [PATCH] cmd_mtdparts.c: fix compiler warning in debug code   Wolfgang Denk
• [U-Boot] [PATCH 0/2] License cleanup: get serious   Wolfgang Denk
• [U-Boot] [PATCH 1/2] License cleanup: remove unintended "All Rights Reserved" notices.   Wolfgang Denk
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Wolfgang Denk
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Wolfgang Denk
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Wolfgang Denk
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Wolfgang Denk
• [U-Boot] lib_generic/zlib.c breaks when DEBUG are defined   Wolfgang Denk
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Wolfgang Denk
• [U-Boot] [PATCH] amcc-common.h: Use filenames from environment variables for update procedure.   Wolfgang Denk
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Wolfgang Denk
• [U-Boot] HP Jornada 720 flashrom   Wolfgang Denk
• [U-Boot] [PATCH] zlib: fix code when DEBUG is defined   Wolfgang Denk
• [U-Boot] [PATCH v2] zlib: fix code when DEBUG is defined   Wolfgang Denk
• [U-Boot] [PATCH v2] zlib: fix code when DEBUG is defined   Wolfgang Denk
• [U-Boot] HP Jornada 720 flashrom   Wolfgang Denk
• [U-Boot] RTLWS11 / XUM-2009, 28-30 September, TU-Dresden - Call for Participation   Wolfgang Denk
• [U-Boot] TEST   Wolfgang Denk
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Wolfgang Denk
• [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Wolfgang Denk
• [U-Boot] boot linux data aboot for S3C2440A   Wolfgang Denk
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Wolfgang Denk
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Wolfgang Denk
• [U-Boot] [PATCH 1/4] s5pc1xx: support Samsung s5pc1xx SoC   Wolfgang Denk
• [U-Boot] [PATCH 2/4] s5pc1xx: support onenand driver   Wolfgang Denk
• [U-Boot] [PATCH 4/4] s5pc1xx: add support SMDKC100 board   Wolfgang Denk
• [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Wolfgang Denk
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Wolfgang Denk
• [U-Boot] Starting compressed win CE kernel   Wolfgang Denk
• [U-Boot] [PATCH 2/4] s5pc1xx: support onenand driver   Wolfgang Denk
• [U-Boot] [PATCH 4/4] s5pc1xx: add support SMDKC100 board   Wolfgang Denk
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Wolfgang Denk
• [U-Boot] [Fwd: Newest Version U-boot]   Wolfgang Denk
• [U-Boot] Starting compressed win CE kernel   Wolfgang Denk
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Wolfgang Denk
• [U-Boot] [PATCH 4/4] s5pc1xx: add support SMDKC100 board   Wolfgang Denk
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Wolfgang Denk
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Wolfgang Denk
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Wolfgang Denk
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Wolfgang Denk
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Wolfgang Denk
• [U-Boot] [PATCH] atmel_df_pow2: standalone to convert dataflashes to pow2   Wolfgang Denk
• [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Wolfgang Denk
• [U-Boot] [PATCH 1/3] Consolidate arch-specific sbrk() implementations   Wolfgang Denk
• [U-Boot] [PATCH 2/3] Standardize mem_malloc_init() implementation   Wolfgang Denk
• [U-Boot] [PATCH 3/3] Consolidate arch-specific mem_malloc_init() implementations   Wolfgang Denk
• [U-Boot] [PATCH 01/17] Add errno.h to i386   Wolfgang Denk
• [U-Boot] [PATCH 02/17] Change inline asm global symbols to local   Wolfgang Denk
• [U-Boot] [PATCH 03/17] Fix regression introduced by commit 8c63d47651f7   Wolfgang Denk
• [U-Boot] [PATCH 04/17] Fix environment configuration for eNET board   Wolfgang Denk
• [U-Boot] [PATCH 05/17] Fix sc520 timer interrupt generation   Wolfgang Denk
• [U-Boot] [PATCH 06/17] Misc i386 PCI fixups   Wolfgang Denk
• [U-Boot] [PATCH 07/17] Misc SATA fixups   Wolfgang Denk
• [U-Boot] [PATCH 08/17] Misc ti_pci1410a fixups   Wolfgang Denk
• [U-Boot] [PATCH 09/17] Misc ds1722 fixups   Wolfgang Denk
• [U-Boot] [PATCH 10/17] Fixup sc520_spunk board   Wolfgang Denk
• [U-Boot] [PATCH 11/17] Misc sc520 cdp fixups   Wolfgang Denk
• [U-Boot] [PATCH 12/17] Replace [read, write]_mmcr_[byte, word, long] with memory mapped structure   Wolfgang Denk
• [U-Boot] [PATCH 13/17] Moved PCI from #ifdef to conditional compile for sc520 boards   Wolfgang Denk
• [U-Boot] [PATCH 14/17] Add PCI support to eNET board   Wolfgang Denk
• [U-Boot] [RFC][PATCH] Ethernet Support for eNET Board   Wolfgang Denk
• [U-Boot] [PATCH] Use different PBA value for E1000 PCI and PCIe cards   Wolfgang Denk
• [U-Boot] [PATCH] ARM: compiler options cleanup - improve tool chain support   Wolfgang Denk
• [U-Boot] [PATCH v2] Add ability for arch code to make changes before we boot   Wolfgang Denk
• [U-Boot] [PATCH v2] Add chip select region to galaxy5200   Wolfgang Denk
• [U-Boot] [PATCH v4 0/4]: bitops cleanup and fixes   Wolfgang Denk
• [U-Boot] [PATCH 1/2] ppc: Remove -fno-strict-aliasing   Wolfgang Denk
• [U-Boot] [PATCH 2/2] arm: Remove -fno-strict-aliasing   Wolfgang Denk
• [U-Boot] [PATCH 1/2] Move uninitialized_var() macro from ubi_uboot.h to compiler.h   Wolfgang Denk
• [U-Boot] invalid core multipliers?   Wolfgang Denk
• [U-Boot] [PATCH] cmd_mtdparts.c: fix compiler warning in debug code   Wolfgang Denk
• [U-Boot] [PATCH 1/2] License cleanup: remove unintended "All Rights Reserved" notices.   Wolfgang Denk
• [U-Boot] mpc83xx/serdes: License cleanup: remove "All Rights Reserved" notice   Wolfgang Denk
• [U-Boot] [PATCH] mxc_nand: Remove Freescale's "All Rights Reserved."   Wolfgang Denk
• [U-Boot] [PATCH v3] zlib: fix code when DEBUG is defined   Wolfgang Denk
• [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Wolfgang Denk
• [U-Boot] [PATCH 1/3] push LOAD_ADDR out to arch mk files   Wolfgang Denk
• [U-Boot] [PATCH 2/3] standalone: convert to kbuild style   Wolfgang Denk
• [U-Boot] [PATCH 3/3] atmel_df_pow2: standalone to convert dataflashes to pow2   Wolfgang Denk
• [U-Boot] ARM mach-types.h sync request   Wolfgang Denk
• [U-Boot] ARM mach-types.h sync request   Wolfgang Denk
• [U-Boot] RFC: split ARM repo and distribute workload   Wolfgang Denk
• [U-Boot] [PATCH] fsl_i2c: increase I2C timeout values and make them configurable   Wolfgang Denk
• [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Wolfgang Denk
• [U-Boot] [PATCH v4 0/4]: bitops cleanup and fixes   Wolfgang Denk
• [U-Boot] RFC: split ARM repo and distribute workload   Wolfgang Denk
• [U-Boot] ARM Pull Request   Wolfgang Denk
• [U-Boot] ARM Pull Request   Wolfgang Denk
• [U-Boot] RFC: split ARM repo and distribute workload   Wolfgang Denk
• [U-Boot] [PATCH 1/3] omap: move TI's boards to board/ti/   Wolfgang Denk
• [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Wolfgang Denk
• [U-Boot] RFC: split ARM repo and distribute workload   Wolfgang Denk
• [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Wolfgang Denk
• [U-Boot] RFC: split ARM repo and distribute workload   Wolfgang Denk
• [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Wolfgang Denk
• [U-Boot] RFC: split ARM repo and distribute workload   Wolfgang Denk
• [U-Boot] ARM Pull Request   Wolfgang Denk
• [U-Boot] ARM Pull Request   Wolfgang Denk
• [U-Boot] Microblaze repo update - patches   Wolfgang Denk
• [U-Boot] [PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards   Wolfgang Denk
• [U-Boot] [PATCH] Remove "atmel_df_pow2" binary with "make clean"   Wolfgang Denk
• [U-Boot] [PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards   Wolfgang Denk
• [U-Boot] u-boot-1.3.4 porting problem   Wolfgang Denk
• [U-Boot] Merging u-boot-s3c24xx with u-boot-samsung   Wolfgang Denk
• [U-Boot] [PATCH] TI DaVinci: DM365: Minor Updates to DM365 EVM   Wolfgang Denk
• [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Wolfgang Denk
• [U-Boot] PowerPC -mrelocatable   Wolfgang Denk
• [U-Boot] [PATCH][v2] mpc8260: move FDT memory node fixup into common CPU code.   Wolfgang Denk
• [U-Boot] [PATCH][v1] mpc8260: remove Ethernet node fixup to use generic FDT code.   Wolfgang Denk
• [U-Boot] [PATCH][v1] r7780mp: fix typo in Ethernet chip model number comment.   Wolfgang Denk
• [U-Boot] [PATCH][v1] FDT: remove obsolete OF_CPU and OF_SOC macros.   Wolfgang Denk
• [U-Boot] [PATCH][v3] ep8248: add support for device tree and secondary Ethernet interface.   Wolfgang Denk
• [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx   Wolfgang Denk
• [U-Boot] [PATCH v2] 85xx: Move to a common linker script   Wolfgang Denk
• [U-Boot] [PATCH] TQM85xx: enable partition support, sort commands   Wolfgang Denk
• [U-Boot] [PATCH v2] TQM85xx: enable partition support, sort commands   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx - master branch   Wolfgang Denk
• [U-Boot] [PATCH v3] TQM85xx: enable partition support, sort commands   Wolfgang Denk
• [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Wolfgang Denk
• [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Wolfgang Denk
• [U-Boot] [PATCH][v2] mpc8260: move FDT memory node fixup into common CPU code.   Wolfgang Denk
• [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Wolfgang Denk
• [U-Boot] [PATCH v2] TI DaVinci: Remove references to SZ_xx   Wolfgang Denk
• [U-Boot] [PATCH][v1] r7780mp: fix typo in Ethernet chip model number comment.   Wolfgang Denk
• [U-Boot] [PATCH][v1] FDT: remove obsolete OF_CPU and OF_SOC macros.   Wolfgang Denk
• [U-Boot] [PATCH][v2] mpc8260: move FDT memory node fixup into common CPU code.   Wolfgang Denk
• [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Wolfgang Denk
• [U-Boot] [PATCH][v1] FDT: remove obsolete OF_CPU and OF_SOC macros.   Wolfgang Denk
• [U-Boot] [PATCH 1/2] mpc52xx, mucmc52, uc101: config cleanup   Wolfgang Denk
• [U-Boot] [PATCH 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Wolfgang Denk
• [U-Boot] [PATCH v3] ppc4xx: Rename compactcenter to intip   Wolfgang Denk
• [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Wolfgang Denk
• [U-Boot] [PATCH 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Wolfgang Denk
• [U-Boot] [PATCH v1] ppc/85xx: PIO Support for FSL eSDHC Controller Driver   Wolfgang Denk
• [U-Boot] [PATCH 1/2] mpc52xx, mucmc52, uc101: config cleanup   Wolfgang Denk
• [U-Boot] [PATCH] move default bootm config options to config_cmd_default.h   Wolfgang Denk
• [U-Boot] [PATCH] tools/netconsole: make a bit more robust and use ncb when possible   Wolfgang Denk
• [U-Boot] [PATCH v2] env: only build env_embedded and envcrc when needed   Wolfgang Denk
• [U-Boot] [PATCH] ppc/85xx: Set CONFIG_SYS_MONITOR_LEN correctly   Wolfgang Denk
• [U-Boot] [PATCH] ppc/85xx: Use CONFIG_SYS_MONITOR_LEN in linker script   Wolfgang Denk
• [U-Boot] [PATCH v2] env: only build env_embedded and envcrc when needed   Wolfgang Denk
• [U-Boot] [PATCH] move default bootm config options to config_cmd_default.h   Wolfgang Denk
• [U-Boot] [PATCH] tools/netconsole: make a bit more robust and use ncb when possible   Wolfgang Denk
• [U-Boot] [PATCH] TI: OMAP3: Remove SZ_xx references   Wolfgang Denk
• [U-Boot] [PATCH] ppc/85xx: Introduce RESET_VECTOR_ADDRESS to handle non-standard link address   Wolfgang Denk
• [U-Boot] [PATCH v2] ppc/85xx: Introduce RESET_VECTOR_ADDRESS to handle non-standard link address   Wolfgang Denk
• [U-Boot] Getting pcmcia drivers builtin by default (bug?)   Wolfgang Denk
• [U-Boot] [PATCH v3] TQM85xx: enable partition support, sort commands   Wolfgang Denk
• [U-Boot] nash   Wolfgang Denk
• [U-Boot] [PATCH "mkimage" branch] tools/mkimage: fix compiler warnings, use "const"   Wolfgang Denk
• [U-Boot] [PATCH 1/5] tools: mkimage: Include default/fit_image.o in the build dependency calculations   Wolfgang Denk
• [U-Boot] [PATCH 2/5][repost] tools: mkimage: Making genimg_print_size API global   Wolfgang Denk
• [U-Boot] [PATCH 1/4 v2] s5pc1xx: support Samsung s5pc1xx SoC   Wolfgang Denk
• [U-Boot] [PATCH 3/5][repost] tools: mkimage: Making table_entry code global   Wolfgang Denk
• [U-Boot] [PATCH 4/5] Kirkwood: Sheevaplug: kwimage configuration   Wolfgang Denk
• [U-Boot] [PATCH v4 5/5][repost] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Wolfgang Denk
• [U-Boot] [PATCH 2/4 v2] s5pc1xx: support onenand driver   Wolfgang Denk
• [U-Boot] [PATCH 3/4 v2] s5pc1xx: support serial driver   Wolfgang Denk
• [U-Boot] [PATCH 4/4 v2] s5pc1xx: add support SMDKC100 board   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx - master branch   Wolfgang Denk
• [U-Boot] [PATCH v3] TQM85xx: enable partition support, sort commands   Wolfgang Denk
• [U-Boot] [PATCH v4 5/5][repost] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Wolfgang Denk
• [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Wolfgang Denk
• [U-Boot] [PATCH] Rename CONFIG_SYS_MDDRC memory constants for all mpc512x boards   Wolfgang Denk
• [U-Boot] [PATCH] Add new Elpida memory configuration for mpc5121ads board   Wolfgang Denk
• [U-Boot] [PATCH] Rename CONFIG_SYS_MDDRC memory constants for all mpc512x boards   Wolfgang Denk
• [U-Boot] Please pull ppc4xx/master   Wolfgang Denk
• [U-Boot] [PATCH] Remove "atmel_df_pow2" binary with "make clean"   Wolfgang Denk
• [U-Boot] [PATCH v1 1/2] mkconfig: pass the board name to board config file   Wolfgang Denk
• [U-Boot] [PATCH][v2] mpc8260: remove Ethernet node fixup to use generic FDT code.   Wolfgang Denk
• [U-Boot] [PATCH][v3] mpc8260: move FDT memory node fixup into common CPU code.   Wolfgang Denk
• [U-Boot] [PATCH][v4] ep8248: add support for device tree and secondary Ethernet interface.   Wolfgang Denk
• [U-Boot] [PATCH][v2] r7780mp: fix typo in Ethernet chip model number comment.   Wolfgang Denk
• [U-Boot] [PATCH][v2] muas3001: remove BRG clock node fixup to use common mpc8260 code.   Wolfgang Denk
• [U-Boot] Uboot Standalone Applications- Test_burst   Wolfgang Denk
• [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Wolfgang Denk
• [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Wolfgang Denk
• [U-Boot] tigon3 Ethernet - any users / testers out there?   Wolfgang Denk
• [U-Boot] [PATCH] kwbimage.c: Fix compile warning when building on 64 bit systems   Wolfgang Denk
• [U-Boot] [PATCH] net/bootp.c: fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] board/flagadm/flash.c: fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] drivers/net/natsemi.c: fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] sk98lin: fix compile warnings   Wolfgang Denk
• [U-Boot] [PATCH] board/esd/common/flash.c: Fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] board/esd/cpci750/ide.c: fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] board/dave/common/flash.c: fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] board/amcc/common/flash.c: Fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] board/etin/debris/phantom.c: Fix compile error   Wolfgang Denk
• [U-Boot] [PATCH] board/linkstation/ide.c: Fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] board/amcc/taihu/flash.c: Fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] board/amcc/yucca/flash.c: Fix compile warning   Wolfgang Denk
• [U-Boot] Fix compile warning / error   Wolfgang Denk
• [U-Boot] [PATCH] board/linkstation/ide.c: Fix compile warning   Wolfgang Denk
• [U-Boot] configure ppc440spe as pci adapter   Wolfgang Denk
• [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support   Wolfgang Denk
• [U-Boot] Maintainer Yuli Barcohen   Wolfgang Denk
• [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Wolfgang Denk
• [U-Boot] [PATCH] board/flagadm/flash.c: fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Wolfgang Denk
• [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Wolfgang Denk
• [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Wolfgang Denk
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Wolfgang Denk
• [U-Boot] [PATCH] kwbimage.c: Fix compile warning when building on 64 bit systems   Wolfgang Denk
• [U-Boot] [PATCH v2] board/flagadm/flash.c: fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] drivers/net/natsemi.c: fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] sk98lin: fix compile warnings   Wolfgang Denk
• [U-Boot] [PATCH] board/esd/common/flash.c: Fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] board/esd/cpci750/ide.c: fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] net/bootp.c: fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] board/dave/common/flash.c: fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] board/etin/debris/phantom.c: Fix compile error   Wolfgang Denk
• [U-Boot] [PATCH v2] board/linkstation/ide.c: Fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] board/amcc/taihu/flash.c: Fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] board/amcc/yucca/flash.c: Fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] board/amcc/common/flash.c: Fix compile warning   Wolfgang Denk
• [U-Boot] configure ppc440spe as pci adapter   Wolfgang Denk
• [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Wolfgang Denk
• [U-Boot] [PATCH] kwbimage.c: Fix compile warning when building on 32/64 bit systems   Wolfgang Denk
• [U-Boot] Firmware Upgrade   Wolfgang Denk
• [U-Boot] [PATCH v2] mx27ads: add support for iMX27ADS board from Freescale   Wolfgang Denk
• [U-Boot] Firmware Upgrade   Wolfgang Denk
• [U-Boot] [PATCH] kwbimage.c: Fix compile warning when building on 64 bit systems (again)   Wolfgang Denk
• [U-Boot] [PATCH] kwbimage.c: Fix compile warning when building on 32/64 bit systems   Wolfgang Denk
• [U-Boot] [PATCH v2] kwbimage.c: Fix compile warning when building on 64 bit systems (again)   Wolfgang Denk
• [U-Boot] [PATCH v3] TQM85xx: enable partition support, sort commands   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx   Wolfgang Denk
• [U-Boot] Microblaze Pull Request   Wolfgang Denk
• [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Wolfgang Denk
• [U-Boot] [PATCH 2/3 v2] standalone: convert to kbuild style   Wolfgang Denk
• [U-Boot] [PATCH v4 1/4]: Move __set/clear_bit from ubifs.h to bitops.h   Wolfgang Denk
• [U-Boot] [PATCH v4 2/4]: arm: Make arm bitops endianness-independent   Wolfgang Denk
• [U-Boot] [PATCH v4 3/4]: Define ffs/fls for all architectures   Wolfgang Denk
• [U-Boot] [PATCH v4 4/4]: arm: Define test_and_set_bit and test_and_clear bit for ARM   Wolfgang Denk
• [U-Boot] autoscr command failure saveenv dataflash   Wolfgang Denk
• [U-Boot] [PATCH v2] env: only build env_embedded and envcrc when needed   Wolfgang Denk
• [U-Boot] [PATCH 1/2 v3] env: only build env_embedded and envcrc when needed   Wolfgang Denk
• [U-Boot] [PATCH 2/2 v2] Blackfin: tweak embedded env config option   Wolfgang Denk
• [U-Boot] 答复: [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Wolfgang Denk
• [U-Boot] [PATCH 1/2 v2] tools/netconsole: make a bit more robust   Wolfgang Denk
• [U-Boot] [PATCH 2/2 v2] tools/netconsole: use ncb automatically if available   Wolfgang Denk
• [U-Boot] I found an error   Wolfgang Denk
• [U-Boot] [PATCH][v3] mpc8260: remove Ethernet node fixup to use generic FDT code.   Wolfgang Denk
• [U-Boot] [PATCH v2] mx27ads: add support for iMX27ADS board from Freescale   Wolfgang Denk
• [U-Boot] [PATCH v2] board/linkstation/ide.c: Fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] Streamlined mpc512x fixed_sdram init sequence allowing for   Wolfgang Denk
• [U-Boot] [PATCH] Add Elpida Memory Configuration to mpc5121ads Boards   Wolfgang Denk
• [U-Boot] help command not working in u-boot   Wolfgang Denk
• [U-Boot] error in fw_printenv   Wolfgang Denk
• [U-Boot] [STATUS] RFC: stretch merge window?   Wolfgang Denk
• [U-Boot] error in fw_printenv   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx   Wolfgang Denk
• [U-Boot] U-Boot load and run via NAND flash - ARM926EJ-S   Wolfgang Denk
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Wolfgang Denk
• [U-Boot] imx27lite stability problems.   Wolfgang Denk
• [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2819, rev 5 to calculate FDR/DFSR   Wolfgang Denk
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Wolfgang Denk
• [U-Boot] Compilation error for fw_printenv   Wolfgang Denk
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Wolfgang Denk
• [U-Boot] [PATCH] Correct ffs/fls regression for PowerPC etc   Wolfgang Denk
• [U-Boot] AMCC 405EX - EMAC0 + EMAC1 Problems   Wolfgang Denk
• [U-Boot] [PATCH v2] Correct ffs/fls regression for PowerPC etc   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx   Wolfgang Denk
• [U-Boot] Uboot 1.1.3 and USB   Wolfgang Denk
• [U-Boot] Details of fw_env.config file   Wolfgang Denk
• [U-Boot] [PATCH v2] kwbimage.c: Fix compile warning when building on 64 bit systems (again)   Wolfgang Denk
• [U-Boot] [PATCH v2] board/flagadm/flash.c: fix compile warning   Wolfgang Denk
• [U-Boot] [STATUS] RFC: stretch merge window?   Wolfgang Denk
• [U-Boot] [PATCH] MAKEALL: Add summary information   Wolfgang Denk
• [U-Boot] [PATCH v2] MAKEALL: Add summary information   Wolfgang Denk
• [U-Boot] [PATCH v3] MAKEALL: Add summary information   Wolfgang Denk
• [U-Boot] [PATCH v3] MAKEALL: Add summary information   Wolfgang Denk
• [U-Boot] [PATCH v2] MAKEALL: Add summary information   Wolfgang Denk
• [U-Boot] Warning Bad CRC   Wolfgang Denk
• [U-Boot] [PATCH 3/6] sbc8548: use I/O accessors   Wolfgang Denk
• [U-Boot] Warning Bad CRC   Wolfgang Denk
• [U-Boot] RFC: split ARM repo and distribute workload   Wolfgang Denk
• [U-Boot] [PATCH v3] at91: Update MEESC board support   Wolfgang Denk
• [U-Boot] Warning Bad CRC   Wolfgang Denk
• [U-Boot] Executing uboot from FLASH   Wolfgang Denk
• [U-Boot] RFC: split ARM repo and distribute workload   Wolfgang Denk
• [U-Boot] [PATCH MAKEALL coldfire] fix tools/kwbimage.c format warning   Wolfgang Denk
• [U-Boot] [PATCH MAKEALL coldfire] fix tools/kwbimage.c format warning   Wolfgang Denk
• [U-Boot] TFTP Server in U-Boot / Pushing files to U-Boot   Wolfgang Denk
• [U-Boot] Warning Bad CRC   Wolfgang Denk
• [U-Boot] [PATCH] Add support for Eukrea CPU9260/CPU9G20 SBC   Wolfgang Denk
• [U-Boot] I am maintainer of Freescale i.MX   Wolfgang Denk
• [U-Boot] Subject: [PATCH v3] mx27ads: add support for iMX27ADS board from Freescale   Wolfgang Denk
• [U-Boot] [PATCH v2] document network driver framework   Wolfgang Denk
• [U-Boot] [PATCH][v2] FDT: remove obsolete OF_CPU and OF_SOC macros.   Wolfgang Denk
• [U-Boot] [PATCH v2] ppc/85xx: PIO Support for FSL eSDHC Controller Driver   Wolfgang Denk
• [U-Boot] [PATCH v3] at91: Update MEESC board support   Wolfgang Denk
• [U-Boot] [PATCH v1 2/3] Add support for save environment variable to MMC/SD card   Wolfgang Denk
• [U-Boot] [PATCH v1 1/3] Make mmc init come before env_relocate   Wolfgang Denk
• [U-Boot] [PATCH v1 3/3] mpc8536: Get the address of env on the SDCard   Wolfgang Denk
• [U-Boot] [PATCH][Net] Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API   Wolfgang Denk
• [U-Boot] [PATCH v3 3/5] NAND boot: MPC8536DS support   Wolfgang Denk
• [U-Boot] [PATCH] Support for Calao USB A9263 board based on AT91SAM9263 CPU   Wolfgang Denk
• [U-Boot] [PATCH] Add support for the Calao QIL-A9G20 board   Wolfgang Denk
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
• [U-Boot] [PATCH-ARM 4/4] Clean-up of s3c24x0 nand driver   Wolfgang Denk
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
• [U-Boot] [PATCH] TI: DaVinci: DM355 Leopard board support   Wolfgang Denk
• [U-Boot] [PATCH] TI: DaVinci: DM355 Leopard board support   Wolfgang Denk
• [U-Boot] [PATCH] TI: DaVinci: Adding GIO addresses to header file   Wolfgang Denk
• [U-Boot] [PATCH] TI: DaVinci: Adding GIO addresses to header file   Wolfgang Denk
• [U-Boot] [PATCH] OMAP3 Overo: Fix ethernet related warnings   Wolfgang Denk
• [U-Boot] [help] is there anything wrong with my previously sent A320 patches?   Wolfgang Denk
• [U-Boot] [PATCH v2] ppc/85xx: PIO Support for FSL eSDHC Controller Driver   Wolfgang Denk
• [U-Boot] [PATCH] TI: DaVinci DM365: Enabling net support on DM365   Wolfgang Denk
• [U-Boot] [PATCH] TI: DaVinci DM365: Enabling net support on DM365   Wolfgang Denk
• [U-Boot] [PATCH v2] board/linkstation/ide.c: Fix compile warning   Wolfgang Denk
• [U-Boot] [PATCHv5 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Wolfgang Denk
• [U-Boot] [PATCH 2/2 v2] Blackfin: tweak embedded env config option   Wolfgang Denk
• [U-Boot] [PATCH v2] env: only build env_embedded and envcrc when needed   Wolfgang Denk
• [U-Boot] [PATCH] mpc512x. Micron nand flash needs a reset before a read command is issued.   Wolfgang Denk
• [U-Boot] [PATCH] smc91111_eeprom: get working with net multi conversion   Wolfgang Denk
• [U-Boot] [PATCH] mpc512x. Micron nand flash needs a reset before a read command is issued   Wolfgang Denk
• [U-Boot] [PATCH] SPARC standalone app fix   Wolfgang Denk
• [U-Boot] [PATCH 1/3] fsl_i2c: Wait for STOP condition to propagate   Wolfgang Denk
• [U-Boot] [PATCH v2] Remove deprecated 'autoscr' command/variables   Wolfgang Denk
• [U-Boot] [PATCH 1/2] ppc: Clean up calling of misc_init_r() during init   Wolfgang Denk
• [U-Boot] [PATCH 2/2] ppc: Clean up calling of phy_reset() during init   Wolfgang Denk
• [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Wolfgang Denk
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
• [U-Boot] [PATCH v2] board/linkstation/ide.c: Fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH v2] board/linkstation/ide.c: Fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH 1/1] SPARC: fixes exported function stub for standalone applications.   Wolfgang Denk
• [U-Boot] [PATCH 2/7] ppc/p4080: Add support for CoreNet style platform LAWs   Wolfgang Denk
• [U-Boot] [PATCH 4/7] ppc/p4080: CoreNet platfrom style secondary core release   Wolfgang Denk
• [U-Boot] [PATCH 6/7] ppc/p4080: Handle timebase enabling and frequency reporting   Wolfgang Denk
• [U-Boot] [PATCH v1 1/3] Make mmc init come before env_relocate   Wolfgang Denk
• [U-Boot] Adding new U-Boot Command.   Wolfgang Denk
• [U-Boot] [PATCH] vxworks: Add CONFIG_VXWORKS_PREBOOT   Wolfgang Denk
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Wolfgang Denk
• [U-Boot] [PATCH] ppc4xx: HCU5 board: add register dump   Wolfgang Denk
• [U-Boot] [PATCH] ppc4xx: Update Netstal configs   Wolfgang Denk
• [U-Boot] [PATCH] ppc4xx: Netstal boards: various cleanups   Wolfgang Denk
• [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
• [U-Boot] [PATCH 6/6] ARM:OMAP3:SDP3430: initial support   Wolfgang Denk
• [U-Boot] [PATCH 1/6] OMAP3: Fix SDRC init   Wolfgang Denk
• [U-Boot] [PATCH 5/6] DLMALLOC:!X86: add av_ initialization   Wolfgang Denk
• [U-Boot] [PATCH 3/8] sbc8548: enable access to second bank of flash   Wolfgang Denk
• [U-Boot] [PATCH 3/8] sbc8548: enable access to second bank of flash   Wolfgang Denk
• [U-Boot] [PATCH 4/8] sbc8548: correct local bus SDRAM size from 64M to 128M   Wolfgang Denk
• [U-Boot] [PATCH 4/8] sbc8548: correct local bus SDRAM size from 64M to 128M   Wolfgang Denk
• [U-Boot] [PATCH 5/8] sbc8548: update PCI/PCI-e support code   Wolfgang Denk
• [U-Boot] [PATCH v3 1/7] ppc/p4080: Add p4080 platform immap definitions   Wolfgang Denk
• [U-Boot] [PATCH v3 2/7] ppc/p4080: Add support for CoreNet style platform LAWs   Wolfgang Denk
• [U-Boot] [PATCH v4 1/7] ppc/p4080: Add p4080 platform immap definitions   Wolfgang Denk
• [U-Boot] [PATCH v4 6/7] ppc/p4080: Handle timebase enabling and frequency reporting   Wolfgang Denk
• [U-Boot] [PATCH v4 7/7] ppc/p4080: Determine various chip frequencies on CoreNet platforms   Wolfgang Denk
• [U-Boot] [PATCH 3/8] sbc8548: enable access to second bank of flash   Wolfgang Denk
• [U-Boot] [PATCH v4 1/7] ppc/p4080: Add p4080 platform immap definitions   Wolfgang Denk
• [U-Boot] [PATCH] imx51:Add support basic boot code of freescale imx51 bbg board   Wolfgang Denk
• [U-Boot] [PATCH 4/6] sbc8548: correct local bus SDRAM size from 64M to 128M   Wolfgang Denk
• [U-Boot] [PATCH] net: phy: mv88e61xx.c : fixed build warning   Wolfgang Denk
• [U-Boot] [U-boot] Marvell Pull Request   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx   Wolfgang Denk
• [U-Boot] Please pull u-boot-ubi   Wolfgang Denk
• [U-Boot] [PATCH 1/2] rtc/ds1337.c: Allow to set TCR register   Wolfgang Denk
• [U-Boot] [PATCH 2/2] digsy_mtc: Add TCR register value for RTC (DS1339)   Wolfgang Denk
• [U-Boot] [PATCH] Add version variable to the galaxy5200 board.   Wolfgang Denk
• [U-Boot] [PATCH 13/13] ppc: Remove reloc_off field from global_data structure   Wolfgang Denk
• [U-Boot] [PATCH 00/13] ppc: Fix relocation   Wolfgang Denk
• [U-Boot] [PATCH 1/2 v5] MAKEALL: Add summary information   Wolfgang Denk
• [U-Boot] [PATCH 2/2 v5] MAKEALL: Use POSIX math   Wolfgang Denk
• [U-Boot] [U-boot] Marvell Pull Request   Wolfgang Denk
• [U-Boot] [PATCH 2/4 v3] s5pc1xx: support onenand driver   Wolfgang Denk
• [U-Boot] MPC875 USB support?   Wolfgang Denk
• [U-Boot] MPC875 USB support?   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx (updated)   Wolfgang Denk
• [U-Boot] [PATCH] Streamlined mpc512x fixed_sdram init sequence.   Wolfgang Denk
• [U-Boot] [PATCH] Add Elpida Memory Configuration to mpc5121ads Boards   Wolfgang Denk
• [U-Boot] [PATCH] Fix "ppc/85xx: Clean up use of LAWAR defines" breakage   Wolfgang Denk
• [U-Boot] [PATCHv4 1/2] mpc5200, mucmc52, uc101: config cleanup   Wolfgang Denk
• [U-Boot] [PATCHv6 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Wolfgang Denk
• [U-Boot] [PATCH 00/13] ppc: Fix relocation   Wolfgang Denk
• [U-Boot] u-boot support for Intel Atom based boards.   Wolfgang Denk
• [U-Boot] [PATCH] mpc5121ads: fix breakage introduced when reordering elpida_mddrc_config[]   Wolfgang Denk
• [U-Boot] Broken board: mpc5121ads   Wolfgang Denk
• [U-Boot] [PATCH] Fixed ordering of MDDRC config registers to unbreak mpc5121ads patch   Wolfgang Denk
• [U-Boot] [PATCH] Fixed ordering of MDDRC config registers to unbreak mpc5121ads patch   Wolfgang Denk
• [U-Boot] [STATUS] Merge Window Closed   Wolfgang Denk
• [U-Boot] [PATCH] mem_mtest: bail out after finding 1st memory error.   Wolfgang Denk
• [U-Boot] kirkwood (openrd): saveenv will not work with environment in NAND   Wolfgang Denk
• [U-Boot] [PATCH] TI: DaVinci: GPIO header file and definitions   Wolfgang Denk
• [U-Boot] Pull request: u-boot-fdt   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc83xx.git   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc83xx.git   Wolfgang Denk
• [U-Boot] Please pullu-boot-i2c.git   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx/master   Wolfgang Denk
• [U-Boot] Please pull u-boot-ubi/master   Wolfgang Denk
• [U-Boot] Pull request: nand flash   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] [PATCH] mem_mtest: bail out after finding 1st memory error.   Wolfgang Denk
• [U-Boot] [PATCH] TI: DaVinci: GPIO header file and definitions   Wolfgang Denk
• [U-Boot] net status   Wolfgang Denk
• [U-Boot] [PATCH] TI: DaVinci: GPIO header file and definitions   Wolfgang Denk
• [U-Boot] U-Boot v2009.08 & JFFS2 (NOR)   Jon Diekema
• [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Dudhat Dipen-B09055
• [U-Boot] [PATCH v2] ppc/85xx: PIO Support for FSL eSDHC Controller Driver   Dudhat Dipen-B09055
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Roland Dreier
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Roland Dreier
• [U-Boot] [PATCH][v1] ppc/85xx: Use CONFIG_FSL_ESDHC to enable sdhc clk   Dipen Dudhat
• [U-Boot] [PATCH][v1] ppc/85xx: Fix up eSDHC controller clock frequency in the device tree for P1 & P2 RDB platforms   Dipen Dudhat
• [U-Boot] [PATCH][v1] ppc/85xx: Fix up eSDHC controller clock frequency in the device tree   Dipen Dudhat
• [U-Boot] [PATCH v1] ppc/85xx: PIO Support for FSL eSDHC Controller Driver   Dipen Dudhat
• [U-Boot] [PATCH v2] ppc/85xx: PIO Support for FSL eSDHC Controller Driver   Dipen Dudhat
• [U-Boot] [PATCH v2] ppc/85xx: PIO Support for FSL eSDHC Controller Driver   Dipen Dudhat
• [U-Boot] mpc5121 - EHCI problems with some (but not all) USB hubs   Damien Dusha
• [U-Boot] mpc5121 - EHCI problems with some (but not all) USB hubs   Damien Dusha
• [U-Boot] mpc5121 - EHCI problems with some (but not all) USB hubs   Damien Dusha
• [U-Boot] mpc5121 - EHCI problems with some (but not all) USB hubs   Damien Dusha
• [U-Boot] I2c imd/imw for a digital potentiometer?   Andrew Dyer
• [U-Boot] Virtual addresses, u-boot, and the MMU   Andrew Dyer
• [U-Boot] About DM6467_config   Valentin Ecker
• [U-Boot] PPC440GX: DDR ECC init time.   Wouter Eckhardt
• [U-Boot] PPC440GX: DDR ECC init time.   Wouter Eckhardt
• [U-Boot] PPC440GX: DDR ECC init time.   Wouter Eckhardt
• [U-Boot] [PATCH v3] ppc4xx: Rename compactcenter to intip   Dirk Eibach
• [U-Boot] [PATCH v4] ppc4xx: Rename compactcenter to intip   Dirk Eibach
• [U-Boot] [PATCH] ppc4xx: Make DDR2 timing for intip more robust   Dirk Eibach
• [U-Boot] PPC440GX: DDR ECC init time.   Grant Erickson
• [U-Boot] HP Jornada 720 flashrom   Kristoffer Ericson
• [U-Boot] HP Jornada 720 flashrom   Kristoffer Ericson
• [U-Boot] HP Jornada flashrom doesnt boot   Kristoffer Ericson
• [U-Boot] Getting pcmcia drivers builtin by default (bug?)   Kristoffer Ericson
• [U-Boot] Any Sa1100 users of uboot out there   Kristoffer Ericson
• [U-Boot] still nothing on serial output sa1100   Kristoffer Ericson
• [U-Boot] EHCI driver problem   Jussi Eronen
• [U-Boot] [PATCH] imx51:Add support basic boot code of freescale imx51 bbg board   Fabio Estevam
• [U-Boot] [PATCH] Add mpc5125ads board and processor to the mpc512x family   Fabio Estevam
• [U-Boot] I am maintainer of Freescale i.MX   Fred Fan
• [U-Boot] imx27lite stability problems.   Fred Fan
• [U-Boot] Subject: [PATCH v3] mx27ads: add support for iMX27ADS board from Freescale   Fred Fan
• [U-Boot] [PATCH] imx51:Add support basic boot code of freescale imx51 bbg board   Fred Fan
• [U-Boot] [PATCH] imx51:Add support basic boot code of freescale imx51 bbg board   Fred Fan
• [U-Boot] I am maintainer of Freescale i.MX   Fred Fan
• [U-Boot] [PATCH] imx51:Add support basic boot code of freescale imx51 bbg board   Fred Fan
• [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Andy Fleming
• [U-Boot] [PATCH 1/2] Move uninitialized_var() macro from ubi_uboot.h to compiler.h   Mike Frysinger
• [U-Boot] [PATCH] net: add random_port() prototype   Mike Frysinger
• [U-Boot] [PATCH 0/8] Blackfin updates for 2009.11   Mike Frysinger
• [U-Boot] [PATCH 1/8] Blackfin: use +(filesize) to make sure we are only doing what is necessary   Mike Frysinger
• [U-Boot] [PATCH 2/8] Blackfin: bf537-stamp: comment CF-Flash Card Support better   Mike Frysinger
• [U-Boot] [PATCH 3/8] Blackfin: enable more network commands for ADI dev boards   Mike Frysinger
• [U-Boot] [PATCH 4/8] Blackfin: change global data register from P5 to P3   Mike Frysinger
• [U-Boot] [PATCH 5/8] Blackfin: cm-bf537u: new board port   Mike Frysinger
• [U-Boot] [PATCH 6/8] Blackfin: fix debug printf modifiers   Mike Frysinger
• [U-Boot] [PATCH 7/8] Blackfin: increase default console size   Mike Frysinger
• [U-Boot] [PATCH 8/8] Blackfin: use scratch pad for exception stack   Mike Frysinger
• [U-Boot] [PATCH] usb: musb: add support for Blackfin MUSB   Mike Frysinger
• [U-Boot] [PATCH 9/8] Blackfin: enable 64bit printf for nand   Mike Frysinger
• [U-Boot] [PATCH][Net] Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API   Mike Frysinger
• [U-Boot] [PATCH 10/8] Blackfin: cm-bf548: fix device->stdio_dev fallout   Mike Frysinger
• [U-Boot] [PATCH 5/8 v2] Blackfin: cm-bf537u: new board port   Mike Frysinger
• [U-Boot] [PATCH] usb: musb: add support for Blackfin MUSB   Mike Frysinger
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
• [U-Boot] [PATCH 1/3] push LOAD_ADDR out to arch mk files   Mike Frysinger
• [U-Boot] [PATCH 2/3] standalone: convert to kbuild style   Mike Frysinger
• [U-Boot] [PATCH 3/3] atmel_df_pow2: standalone to convert dataflashes to pow2   Mike Frysinger
• [U-Boot] [PATCH 3/3] atmel_df_pow2: standalone to convert dataflashes to pow2   Mike Frysinger
• [U-Boot] [PATCH 2/3 v2] standalone: convert to kbuild style   Mike Frysinger
• [U-Boot] PowerPC -mrelocatable   Mike Frysinger
• [U-Boot] [PATCH v2] env: only build env_embedded and envcrc when needed   Mike Frysinger
• [U-Boot] [PATCH] tools/netconsole: make a bit more robust and use ncb when possible   Mike Frysinger
• [U-Boot] [PATCH] move default bootm config options to config_cmd_default.h   Mike Frysinger
• [U-Boot] [PATCH v2] env: only build env_embedded and envcrc when needed   Mike Frysinger
• [U-Boot] [PATCH] move default bootm config options to config_cmd_default.h   Mike Frysinger
• [U-Boot] [PATCH] tools/netconsole: make a bit more robust and use ncb when possible   Mike Frysinger
• [U-Boot] [PATCH v2] env: only build env_embedded and envcrc when needed   Mike Frysinger
• [U-Boot] [PATCH] tools/netconsole: make a bit more robust and use ncb when possible   Mike Frysinger
• [U-Boot] [PATCH] move default bootm config options to config_cmd_default.h   Mike Frysinger
• [U-Boot] [PATCH 1/2 v3] env: only build env_embedded and envcrc when needed   Mike Frysinger
• [U-Boot] [PATCH 2/2] Blackfin: tweak embedded env config option   Mike Frysinger
• [U-Boot] [PATCH 1/2 v2] tools/netconsole: make a bit more robust   Mike Frysinger
• [U-Boot] [PATCH 2/2 v2] tools/netconsole: use ncb automatically if available   Mike Frysinger
• [U-Boot] LZMA support   Mike Frysinger
• [U-Boot] [PATCH v2] document network driver framework   Mike Frysinger
• [U-Boot] [PATCH 2/2 v2] Blackfin: tweak embedded env config option   Mike Frysinger
• [U-Boot] [PATCH][Net] Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API   Mike Frysinger
• [U-Boot] [PATCH] kwbimage.c: Fix compile warning when building on 32/64 bit systems   Mike Frysinger
• [U-Boot] [PATCH] kwbimage.c: Fix compile warning when building on 32/64 bit systems   Mike Frysinger
• [U-Boot] [PATCH 2/2 v2] Blackfin: tweak embedded env config option   Mike Frysinger
• [U-Boot] [PATCH v2] env: only build env_embedded and envcrc when needed   Mike Frysinger
• [U-Boot] [PATCH] smc91111_eeprom: get working with net multi conversion   Mike Frysinger
• [U-Boot] [PATCH] MAKEALL: Add summary information   Mike Frysinger
• [U-Boot] [PATCH v3] MAKEALL: Add summary information   Mike Frysinger
• [U-Boot] [PATCH] smc91111_eeprom: get working with net multi conversion   Mike Frysinger
• [U-Boot] [PATCH] mtd: SPI Flash: Winbond W25X16/WX2532/WX2564 support   Mike Frysinger
• [U-Boot] tftp packet failure counter reset   Mike Frysinger
• [U-Boot] Blackfin: UART on SPORT   Mike Frysinger
• [U-Boot] [PATCH v2] env: only build env_embedded and envcrc when needed   Mike Frysinger
• [U-Boot] [PATCH 2/2 v2] Blackfin: tweak embedded env config option   Mike Frysinger
• [U-Boot] smc911x runtime detection (was: TI: OMAP3: Overo Tobi ethernet support)   Mike Frysinger
• [U-Boot] [RFC][PATCH 1/8] Fix gcc 4.4.1 compiler warning   Mike Frysinger
• [U-Boot] smc911x runtime detection (was: TI: OMAP3: Overo Tobi ethernet support)   Mike Frysinger
• [U-Boot] [PATCH 1/2] Blackfin: bf533-ezkit: update env location   Mike Frysinger
• [U-Boot] [PATCH 2/2] Blackfin: update default console= settings   Mike Frysinger
• [U-Boot] [PATCH 1/2 v4] env: only build env_embedded and envcrc when needed   Mike Frysinger
• [U-Boot] [PATCH 2/2 v3] Blackfin: tweak embedded LDR env config option   Mike Frysinger
• [U-Boot] [PATCH] ppc4xx: Fix PMC405DE support   Matthias Fuchs
• [U-Boot] [PATCH 1/2] ppc4xx: Allow overwriting pci target registers for all 4xx boards   Matthias Fuchs
• [U-Boot] [PATCH 2/2] ppc4xx: Add CONFIG_PCI_4xx_PTM_OVERWRITE to some esd 4xx boards   Matthias Fuchs
• [U-Boot] [PATCH] board/esd/common/flash.c: Fix compile warning   Matthias Fuchs
• [U-Boot] [PATCH] ppc4xx: Add SDRAM detection for PMC440 boards   Matthias Fuchs
• [U-Boot] [PATCH V2] ppc4xx: Add SDRAM detection for PMC440 boards   Matthias Fuchs
• [U-Boot] [PATCH 1/2] ppc: Remove -fno-strict-aliasing   Kumar Gala
• [U-Boot] [PATCH 2/2] arm: Remove -fno-strict-aliasing   Kumar Gala
• [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Kumar Gala
• [U-Boot] [PATCH][v1] ppc/85xx: Fix up eSDHC controller clock frequency in the device tree for P1 & P2 RDB platforms   Kumar Gala
• [U-Boot] [PATCH][v1] ppc/85xx: Use CONFIG_FSL_ESDHC to enable sdhc clk   Kumar Gala
• [U-Boot] [PATCH v2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Kumar Gala
• [U-Boot] [PATCH] ppc/8xxx: relocate cpu pointer in global data   Kumar Gala
• [U-Boot] [PATCH] ppc/8xxx: relocate cpu pointer in global data   Kumar Gala
• [U-Boot] [PATCH] ppc/8xxx: Remove ddr_pd_cntl register since it doesn't exist   Kumar Gala
• [U-Boot] [PATCH] ppc/8xxx: Remove ddr_pd_cntl register since it doesn't exist   Kumar Gala
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Kumar Gala
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Kumar Gala
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Cleanup makefile and related optional files   Kumar Gala
• [U-Boot] [PATCH] ppc/8xxx: Refactor code to determine if PCI is enabled & agent/host   Kumar Gala
• [U-Boot] [PATCH] TQM85xx: enable partition support, sort commands   Kumar Gala
• [U-Boot] [PATCH][v1] ppc/85xx: Fix up eSDHC controller clock frequency in the device tree   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Add a simple function to search the TLB   Kumar Gala
• [U-Boot] [PATCH 1/2 v2] 85xx: CONFIG_MP Boot Page Translation update   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Fix bug in setup_mp code   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Fix bug in setup_mp code   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Add a simple function to search the TLB   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Cleanup makefile and related optional files   Kumar Gala
• [U-Boot] [PATCH] ppc/8xxx: Refactor code to determine if PCI is enabled & agent/host   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Fix bug in setup_mp code   Kumar Gala
• [U-Boot] [PATCH 2/2] fsl: add register read-back to set_law()   Kumar Gala
• [U-Boot] [PATCH][v1] ppc/85xx/86xx: Bug fix: call to puts in probecpu() moved to checkcpu().   Kumar Gala
• [U-Boot] [PATCH][v1] ppc/85x/86xxx: Device tree fixup for number of cores   Kumar Gala
• [U-Boot] [PATCH][v2] ppc/85xx, 86xx: Handling Unknown SOC version   Kumar Gala
• [U-Boot] MTD compile error   Kumar Gala
• [U-Boot] [PATCH] TQM85xx: enable partition support, sort commands   Kumar Gala
• [U-Boot] [PATCH v1 1/2] mkconfig: pass the board name to board config file   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx - master branch   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Clean up do_reset   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Set CONFIG_SYS_MONITOR_LEN correctly   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Use CONFIG_SYS_MONITOR_LEN in linker script   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Set CONFIG_SYS_MONITOR_LEN correctly   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Introduce RESET_VECTOR_ADDRESS to handle non-standard link address   Kumar Gala
• [U-Boot] [PATCH v2] ppc/85xx: Introduce RESET_VECTOR_ADDRESS to handle non-standard link address   Kumar Gala
• [U-Boot] [PATCH v2] ppc/85xx: Introduce RESET_VECTOR_ADDRESS to handle non-standard link address   Kumar Gala
• [U-Boot] [PATCH v3] TQM85xx: enable partition support, sort commands   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx - master branch   Kumar Gala
• [U-Boot] [PATCH v3] TQM85xx: enable partition support, sort commands   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Don't enable interrupts before we're ready   Kumar Gala
• [U-Boot] [PATCH v3] TQM85xx: enable partition support, sort commands   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Ensure that MAS8 is zero when writing TLB entries.   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Remove some bogus code from external interrupt handler.   Kumar Gala
• [U-Boot] [PATCH] ppc/8xxx: Misc DDR related fixes   Kumar Gala
• [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Kumar Gala
• [U-Boot] [PATCH v2 2/2] mpc8536: simplify the top makefile for 36-bit config   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Simplify the top makefile for 36-bit config for MPC8572DS   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Simplify the top makefile for 36-bit config for P2020DS   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Simplify the top makefile for P1_P2_RDB boards   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Clean up do_reset   Kumar Gala
• [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support   Kumar Gala
• [U-Boot] [PATCH v2 3/5] NAND boot: MPC8536DS support   Kumar Gala
• [U-Boot] [PATCH v2 3/5] NAND boot: MPC8536DS support   Kumar Gala
• [U-Boot] [PATCH v2 3/5] NAND boot: MPC8536DS support   Kumar Gala
• [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Kumar Gala
• [U-Boot] [PATCH 1/2] ppc/85xx: Introduce low level write_tlb function   Kumar Gala
• [U-Boot] [PATCH 2/2] ppc/85xx: Repack tlb_table to save space   Kumar Gala
• [U-Boot] [PATCH 1/2] ppc/85xx: Introduce low level write_tlb function   Kumar Gala
• [U-Boot] [PATCH 2/2] ppc/85xx: Repack tlb_table to save space   Kumar Gala
• [U-Boot] [PATCH v2 1/2] ppc/85xx: Introduce low level write_tlb function   Kumar Gala
• [U-Boot] [PATCH v2 2/2] ppc/85xx: Repack tlb_table to save space   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Move code around to prep for NAND_SPL   Kumar Gala
• [U-Boot] [PATCH v4] ppc/85xx: add boot from NAND/eSDHC/eSPI support   Kumar Gala
• [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support   Kumar Gala
• [U-Boot] [PATCH v2 2/5] NAND boot: change NAND loader's relocate SP to CONFIG param   Kumar Gala
• [U-Boot] [RFC][PATCH] NAND boot: MPC8536DS support   Kumar Gala
• [U-Boot] [RFC][PATCH] NAND boot: MPC8536DS support   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Ensure that MAS8 is zero when writing TLB entries.   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Remove some bogus code from external interrupt handler.   Kumar Gala
• [U-Boot] [PATCH] ppc/8xxx: Misc DDR related fixes   Kumar Gala
• [U-Boot] [PATCH 1/2] ppc/85xx: Change cpu_init_early_f so we can use with NAND SPL   Kumar Gala
• [U-Boot] [PATCH 2/2] ppc/85xx: Split out cpu_init_early into its own file for NAND_SPL   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Disable all async interrupt sources when we boot   Kumar Gala
• [U-Boot] [PATCH v3] TQM85xx: enable partition support, sort commands   Kumar Gala
• [U-Boot] LCRR setting on XPEDITE5370 & XPEDITE5200   Kumar Gala
• [U-Boot] LCRR setting on XPEDITE5370 & XPEDITE5200   Kumar Gala
• [U-Boot] [PATCH 1/2] ppc/85xx: Change cpu_init_early_f so we can use with NAND SPL   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Disable all async interrupt sources when we boot   Kumar Gala
• [U-Boot] [PATCH 2/2] ppc/85xx: Split out cpu_init_early into its own file for NAND_SPL   Kumar Gala
• [U-Boot] [PATCH v4] ppc/85xx: add boot from NAND/eSDHC/eSPI support   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Move code around to prep for NAND_SPL   Kumar Gala
• [U-Boot] [PATCH v2 2/2] ppc/85xx: Repack tlb_table to save space   Kumar Gala
• [U-Boot] [PATCH v2 1/2] ppc/85xx: Introduce low level write_tlb function   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Disable all async interrupt sources when we boot   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Fix LCRR_CLKDIV defines   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Fix LCRR_CLKDIV defines   Kumar Gala
• [U-Boot] [PATCH 2/7] mpc85xx: Add eSDHC support for MPC8569E-MDS boards   Kumar Gala
• [U-Boot] [PATCH 3/7] mpc85xx: Add eLBC NAND support for MPC8569E-MDS boards   Kumar Gala
• [U-Boot] [PATCH 4/7] mpc85xx: Setup SRIO memory region LAW for MPC8569E-MDS boards   Kumar Gala
• [U-Boot] [PATCH 1/7] fdt_support: Add multi-serial support for stdout fixup   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx   Kumar Gala
• [U-Boot] [PATCH v3] mpc83xx: update LCRR register handling   Kumar Gala
• [U-Boot] [STATUS] RFC: stretch merge window?   Kumar Gala
• [U-Boot] [PATCH v2] Correct ffs/fls regression for PowerPC etc   Kumar Gala
• [U-Boot] [PATCH 1/3] ppc/85xx: Cleanup p1_p2_rdb PCI setup   Kumar Gala
• [U-Boot] [PATCH 2/3] ppc/85xx: Clean up p2020ds PCI setup code   Kumar Gala
• [U-Boot] [PATCH 3/3] ppc/85xx: Clean up mpc8572DS PCI setup code   Kumar Gala
• [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Kumar Gala
• [U-Boot] [PATCH v2 1/3] ppc/85xx: Simplify the top makefile for 36-bit config for MPC8572DS   Kumar Gala
• [U-Boot] [PATCH v2 2/3] ppc/85xx: Simplify the top makefile for 36-bit config for P2020DS   Kumar Gala
• [U-Boot] [PATCH v3 3/3] ppc/85xx: Simplify the top makefile for P1_P2_RDB boards   Kumar Gala
• [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Kumar Gala
• [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: simplify the top makefile for 36-bit config for mpc8536ds   Kumar Gala
• [U-Boot] [PATCH 0/7] ppc/p4080: infrastructure patches   Kumar Gala
• [U-Boot] [PATCH 1/7] ppc/p4080: Add p4080 platform immap definitions   Kumar Gala
• [U-Boot] [PATCH 2/7] ppc/p4080: Add support for CoreNet style platform LAWs   Kumar Gala
• [U-Boot] [PATCH 3/7] ppc/p4080: CoreNet platfrom style CCSRBAR setting   Kumar Gala
• [U-Boot] [PATCH 4/7] ppc/p4080: CoreNet platfrom style secondary core release   Kumar Gala
• [U-Boot] [PATCH 5/7] ppc/p4080: Add various p4080 related defines (and p4040)   Kumar Gala
• [U-Boot] [PATCH 6/7] ppc/p4080: Handle timebase enabling and frequency reporting   Kumar Gala
• [U-Boot] [PATCH 7/7] ppc/p4080: Determine various chip frequencies on CoreNet platforms   Kumar Gala
• [U-Boot] [PATCH 1/7] ppc/p4080: Add p4080 platform immap definitions   Kumar Gala
• [U-Boot] [PATCH v2] ppc/p4080: Add p4080 platform immap definitions   Kumar Gala
• [U-Boot] [PATCH 2/7] ppc/p4080: Add support for CoreNet style platform LAWs   Kumar Gala
• [U-Boot] [PATCH 1/8] sbc8548: delete unused MPC8548CDS info carried over from port   Kumar Gala
• [U-Boot] [PATCH v3 1/7] ppc/p4080: Add p4080 platform immap definitions   Kumar Gala
• [U-Boot] [PATCH v3 2/7] ppc/p4080: Add support for CoreNet style platform LAWs   Kumar Gala
• [U-Boot] [PATCH v3 3/7] ppc/p4080: CoreNet platfrom style CCSRBAR setting   Kumar Gala
• [U-Boot] [PATCH v3 4/7] ppc/p4080: CoreNet platfrom style secondary core release   Kumar Gala
• [U-Boot] [PATCH v3 5/7] ppc/p4080: Add various p4080 related defines (and p4040)   Kumar Gala
• [U-Boot] [PATCH v3 6/7] ppc/p4080: Handle timebase enabling and frequency reporting   Kumar Gala
• [U-Boot] [PATCH v3 7/7] ppc/p4080: Determine various chip frequencies on CoreNet platforms   Kumar Gala
• [U-Boot] [PATCH 1/8] sbc8548: delete unused MPC8548CDS info carried over from port   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Clean up use of LAWAR defines   Kumar Gala
• [U-Boot] [PATCH 7/8] sbc8548: allow enabling PCI via a make config option   Kumar Gala
• [U-Boot] [PATCH 4/8] sbc8548: correct local bus SDRAM size from 64M to 128M   Kumar Gala
• [U-Boot] [PATCH v3 1/3] ppc/85xx: Clean up p1_p2_rdb PCI setup   Kumar Gala
• [U-Boot] [PATCH v3 2/3] ppc/85xx: Clean up p2020ds PCI setup code   Kumar Gala
• [U-Boot] [PATCH v3 3/3] ppc/85xx: Clean up mpc8572DS PCI setup code   Kumar Gala
• [U-Boot] [PATCH v4 1/7] ppc/p4080: Add p4080 platform immap definitions   Kumar Gala
• [U-Boot] [PATCH v4 2/7] ppc/p4080: Add support for CoreNet style platform LAWs   Kumar Gala
• [U-Boot] [PATCH v4 3/7] ppc/p4080: CoreNet platfrom style CCSRBAR setting   Kumar Gala
• [U-Boot] [PATCH v4 4/7] ppc/p4080: CoreNet platfrom style secondary core release   Kumar Gala
• [U-Boot] [PATCH v4 5/7] ppc/p4080: Add various p4080 related defines (and p4040)   Kumar Gala
• [U-Boot] [PATCH v4 6/7] ppc/p4080: Handle timebase enabling and frequency reporting   Kumar Gala
• [U-Boot] [PATCH v4 7/7] ppc/p4080: Determine various chip frequencies on CoreNet platforms   Kumar Gala
• [U-Boot] [PATCH][v1] ppc/85xx: 32bit DDR changes for P1020/P1011   Kumar Gala
• [U-Boot] [PATCH 8/8] sbc8548: replace README with completely new document   Kumar Gala
• [U-Boot] [PATCH 6/8] sbc8548: enable use of PCI network cards   Kumar Gala
• [U-Boot] [PATCH 1/8] sbc8548: delete unused MPC8548CDS info carried over from port   Kumar Gala
• [U-Boot] [PATCH 2/8] sbc8548: get_clock_freq is not valid for this board   Kumar Gala
• [U-Boot] [PATCH 3/8] sbc8548: enable access to second bank of flash   Kumar Gala
• [U-Boot] [PATCH v4] ppc/85xx: Clean up mpc8572DS PCI setup code   Kumar Gala
• [U-Boot] [PATCH 2/6] sbc8548: remove eTSEC3/4 voltage hack   Kumar Gala
• [U-Boot] [PATCH 3/6] sbc8548: use I/O accessors   Kumar Gala
• [U-Boot] [PATCH 4/6] sbc8548: correct local bus SDRAM size from 64M to 128M   Kumar Gala
• [U-Boot] [PATCH 1/6] fsl_pci: create a SET_STD_PCI_INFO() helper wrapper   Kumar Gala
• [U-Boot] [PATCH 5/6] sbc8548: update PCI/PCI-e support code   Kumar Gala
• [U-Boot] [PATCH 6/6] sbc8548: allow enabling PCI via a make config option   Kumar Gala
• [U-Boot] [PATCH] sbc85x0: tidy up Makefile to use new configuration script.   Kumar Gala
• [U-Boot] [PATCH] mpc8610hpcd: Use common 86xx fdt fixup code   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: add ld script file for boot from NAND   Kumar Gala
• [U-Boot] [PATCH] immap_85xx: add porpllsr's plat ratio definition   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: add cpu init config file for boot from NAND   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Fix enabling of L2 cache   Kumar Gala
• [U-Boot] [PATCH 2/7] ppc/p4080: Add support for CoreNet style platform LAWs   Kumar Gala
• [U-Boot] mpc85xx: Put SDHC clock-frequency in device tree   Kumar Gala
• [U-Boot] [PATCH 4/7] ppc/p4080: CoreNet platfrom style secondary core release   Kumar Gala
• [U-Boot] [PATCH v5 1/7] ppc/p4080: Add p4080 platform immap definitions   Kumar Gala
• [U-Boot] [PATCH v5 2/7] ppc/p4080: Add support for CoreNet style platform LAWs   Kumar Gala
• [U-Boot] [PATCH v5 3/7] ppc/p4080: CoreNet platfrom style CCSRBAR setting   Kumar Gala
• [U-Boot] [PATCH v5 4/7] ppc/p4080: CoreNet platfrom style secondary core release   Kumar Gala
• [U-Boot] [PATCH v5 5/7] ppc/p4080: Add various p4080 related defines (and p4040)   Kumar Gala
• [U-Boot] [PATCH v5 6/7] ppc/p4080: Handle timebase enabling and frequency reporting   Kumar Gala
• [U-Boot] [PATCH v5 7/7] ppc/p4080: Determine various chip frequencies on CoreNet platforms   Kumar Gala
• [U-Boot] [PATCH v4 1/7] ppc/p4080: Add p4080 platform immap definitions   Kumar Gala
• [U-Boot] [PATCH v5 1/7] ppc/p4080: Add p4080 platform immap definitions   Kumar Gala
• [U-Boot] [PATCH v5 2/7] ppc/p4080: Add support for CoreNet style platform LAWs   Kumar Gala
• [U-Boot] [PATCH v5 3/7] ppc/p4080: CoreNet platfrom style CCSRBAR setting   Kumar Gala
• [U-Boot] [PATCH v5 4/7] ppc/p4080: CoreNet platfrom style secondary core release   Kumar Gala
• [U-Boot] [PATCH v5 5/7] ppc/p4080: Add various p4080 related defines (and p4040)   Kumar Gala
• [U-Boot] [PATCH v5 6/7] ppc/p4080: Handle timebase enabling and frequency reporting   Kumar Gala
• [U-Boot] [PATCH v5 7/7] ppc/p4080: Determine various chip frequencies on CoreNet platforms   Kumar Gala
• [U-Boot] [PATCH v5 1/7] ppc/p4080: Add p4080 platform immap definitions   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx (updated)   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Clean up immap_85xx.h   Kumar Gala
• [U-Boot] [PATCH] sbc8548: reclaim wasted sector in boot flash   Kumar Gala
• [U-Boot] [PATCH] mpc8536: fix board config file line length   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: get_law_entry isn't used in CONFIG_NAND_SPL   Kumar Gala
• [U-Boot] [PATCH v4 1/3] NAND boot: MPC8536DS support   Kumar Gala
• [U-Boot] [PATCH v4 2/3] On-chip ROM boot: MPC8536DS support   Kumar Gala
• [U-Boot] [PATCH v4 3/3] Add README.mpc8536ds   Kumar Gala
• [U-Boot] [PATCH] ppc/85xx: Clean up immap_85xx.h   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx.git   Kumar Gala
• [U-Boot] boot linux data aboot for S3C2440A   abdoulaye Walsimou Gaye
• [U-Boot] [PATCH-ARM 4/4] Clean-up of s3c24x0 nand driver   abdoulaye Walsimou Gaye
• [U-Boot] Starting compressed win CE kernel   A. Geisreiter
• [U-Boot] Starting compressed win CE kernel   A. Geisreiter
• [U-Boot] [PATCH] mpc512x. Micron nand flash needs a reset before a read command is issued.   Paul Gibson
• [U-Boot] [PATCH] mpc512x. Micron nand flash needs a reset before a read command is issued   Paul Gibson
• [U-Boot] [PATCH] Cleanup: use constant   Niklaus Giger
• [U-Boot] [PATCH] vxworks: Make loading vxworks less verbose   Niklaus Giger
• [U-Boot] [PATCH] vxworks: Add CONFIG_VXWORKS_PREBOOT   Niklaus Giger
• [U-Boot] [PATCH] vxworks: Make loading vxworks less verbose   Niklaus Giger
• [U-Boot] [PATCH] vxworks: Add CONFIG_VXWORKS_PREBOOT   Niklaus Giger
• [U-Boot] [Patch v2] vxworks: Add CONFIG_VXWORKS_PREBOOT   Niklaus Giger
• [U-Boot] [PATCH] ppc4xx: HCU5 board: add register dump   Niklaus Giger
• [U-Boot] [PATCH] ppc4xx: Update Netstal configs   Niklaus Giger
• [U-Boot] [PATCH] ppc4xx: Netstal boards: various cleanups   Niklaus Giger
• [U-Boot] [PATCH] ppc4xx: HCU5 board: add register dump   Niklaus Giger
• [U-Boot] [PATCH] ppc4xx: HCU5 board: add register dump   Niklaus Giger
• [U-Boot] [PATCH] ppc4xx: Add command 440epx_r   Niklaus Giger
• [U-Boot] ppc4xx: Convert PPC4xx UIC defines from lower case to upper case   Niklaus Giger
• [U-Boot] [PATCH v0 1/2] u-boot-2009.08 NET: Move MDIO regs out of TSEC Space   Sandeep Gopalpet
• [U-Boot] [PATCH v0 2/2] u-boot-2009.08 NET: Base support for etsec2.0   Sandeep Gopalpet
• [U-Boot] ARM mach-types.h sync request   Daniel Gorsulowski
• [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Daniel Gorsulowski
• [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Daniel Gorsulowski
• [U-Boot] ARM mach-types.h sync request   Daniel Gorsulowski
• [U-Boot] How to burn new U-Boot over network   Daniel Gorsulowski
• [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Daniel Gorsulowski
• [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Daniel Gorsulowski
• [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Daniel Gorsulowski
• [U-Boot] [PATCH v3] at91: Update MEESC board support   Daniel Gorsulowski
• [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Daniel Gorsulowski
• [U-Boot] [PATCH v3] at91: Update MEESC board support   Daniel Gorsulowski
• [U-Boot] [PATCH v3 RESEND] at91: Update MEESC board support   Daniel Gorsulowski
• [U-Boot] [PATCH v4] at91: Update MEESC board support   Daniel Gorsulowski
• [U-Boot] [PATCH v4] at91: Update MEESC board support   Daniel Gorsulowski
• [U-Boot] [PATCH v5] at91: Update MEESC board support   Daniel Gorsulowski
• [U-Boot] [PATCH 0/8] Update/enhance sbc8548 support   Paul Gortmaker
• [U-Boot] [PATCH 1/8] sbc8548: delete unused MPC8548CDS info carried over from port   Paul Gortmaker
• [U-Boot] [PATCH 2/8] sbc8548: get_clock_freq is not valid for this board   Paul Gortmaker
• [U-Boot] [PATCH 3/8] sbc8548: enable access to second bank of flash   Paul Gortmaker
• [U-Boot] [PATCH 4/8] sbc8548: correct local bus SDRAM size from 64M to 128M   Paul Gortmaker
• [U-Boot] [PATCH 5/8] sbc8548: update PCI/PCI-e support code   Paul Gortmaker
• [U-Boot] [PATCH 6/8] sbc8548: enable use of PCI network cards   Paul Gortmaker
• [U-Boot] [PATCH 7/8] sbc8548: allow enabling PCI via a make config option   Paul Gortmaker
• [U-Boot] [PATCH 8/8] sbc8548: replace README with completely new document   Paul Gortmaker
• [U-Boot] [PATCH 1/8] sbc8548: delete unused MPC8548CDS info carried over from port   Paul Gortmaker
• [U-Boot] [PATCH v3 3/3] ppc/85xx: Clean up mpc8572DS PCI setup code   Paul Gortmaker
• [U-Boot] [PATCH 0/6] sbc8548 update; remaining bits for 85xx tree.   Paul Gortmaker
• [U-Boot] [PATCH 1/6] fsl_pci: create a SET_STD_PCI_INFO() helper wrapper   Paul Gortmaker
• [U-Boot] [PATCH 2/6] sbc8548: remove eTSEC3/4 voltage hack   Paul Gortmaker
• [U-Boot] [PATCH 3/6] sbc8548: use I/O accessors   Paul Gortmaker
• [U-Boot] [PATCH 4/6] sbc8548: correct local bus SDRAM size from 64M to 128M   Paul Gortmaker
• [U-Boot] [PATCH 5/6] sbc8548: update PCI/PCI-e support code   Paul Gortmaker
• [U-Boot] [PATCH 6/6] sbc8548: allow enabling PCI via a make config option   Paul Gortmaker
• [U-Boot] [PATCH 04/13] ppc: Remove pci config table pointer relocation fixups   Paul Gortmaker
• [U-Boot] [PATCH 04/13] ppc: Remove pci config table pointer relocation fixups   Paul Gortmaker
• [U-Boot] [PATCH] sbc85x0: tidy up Makefile to use new configuration script.   Paul Gortmaker
• [U-Boot] [PATCH] sbc8349: tidy up Makefile to use new configuration script.   Paul Gortmaker
• [U-Boot] [PATCH 3/8] sbc8548: enable access to second bank of flash   Paul Gortmaker
• [U-Boot] [PATCH 5/8] sbc8548: update PCI/PCI-e support code   Paul Gortmaker
• [U-Boot] [PATCH 3/8] sbc8548: enable access to second bank of flash   Paul Gortmaker
• [U-Boot] Please pull u-boot-mpc85xx (updated)   Paul Gortmaker
• [U-Boot] [PATCH] sbc8548: reclaim wasted sector in boot flash   Paul Gortmaker
• [U-Boot] [PATCH] mem_mtest: bail out after finding 1st memory error.   Paul Gortmaker
• [U-Boot] [PATCH] sbc8641d: fix LAW so board doesn't hang on DDR init   Paul Gortmaker
• [U-Boot] [PATCH] mem_mtest: bail out after finding 1st memory error.   Paul Gortmaker
• [U-Boot] Flashing images bigger than ram   Ben Goska
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Wolfgang Grandegger
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Wolfgang Grandegger
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Wolfgang Grandegger
• [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Wolfgang Grandegger
• [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Wolfgang Grandegger
• [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Wolfgang Grandegger
• [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2919, rev 5 to calculate FDR/DFSR   Wolfgang Grandegger
• [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2919, rev 5 to calculate FDR/DFSR   Wolfgang Grandegger
• [U-Boot] mpc85xx: Put SDHC clock-frequency in device tree   Gao Guanhua
• [U-Boot] mpc85xx: Put SDHC clock-frequency in device tree   Gao Guanhua-B22826
• [U-Boot] Request to mailing list U-Boot-Users   Tien Guo
• [U-Boot] AMCC 405EX - EMAC0 + EMAC1 Problems   Jonathan Haws
• [U-Boot] [PATCH 1/1] SPARC: fixes exported function stub for standalone applications. jmp ensures we get back to the location we came from, size(void *) make sure we get the function addresses correctly from the table (entry*4 instead of entry*1).   Daniel Hellstrom
• [U-Boot] [PATCH] SPARC standalone app fix   Daniel Hellstrom
• [U-Boot] [PATCH 1/1] SPARC: fixes exported function stub for standalone applications.   Daniel Hellstrom
• [U-Boot] [PATCH 1/1] SPARC: fixes exported function stub for standalone applications.   Daniel Hellstrom
• [U-Boot] [PATCH] SPARC standalone app fix   Daniel Hellstrom
• [U-Boot] [PATCH 1/1] Fix bug in jumptable call stubs for SPARC.   Daniel Hellstrom
• [U-Boot] TFTP Server in U-Boot / Pushing files to U-Boot   Joe Hershberger
• [U-Boot] TFTP Server in U-Boot / Pushing files to U-Boot   Joe Hershberger
• [U-Boot] [PATCH v1 1/2] mkconfig: pass the board name to board config file   Mingkai Hu
• [U-Boot] [PATCH v2 2/2] mpc8536: simplify the top makefile for 36-bit config   Mingkai Hu
• [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Mingkai Hu
• [U-Boot] [PATCH 2/2] mpc8536: simplify the top makefile for 36-bit config   Mingkai Hu
• [U-Boot] [PATCH v2 0/5] Add boot from NAND/eSDHC/eSPI support   Mingkai Hu
• [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support   Mingkai Hu
• [U-Boot] [PATCH v2 2/5] NAND boot: change NAND loader's relocate SP to CONFIG param   Mingkai Hu
• [U-Boot] [PATCH v2 3/5] NAND boot: MPC8536DS support   Mingkai Hu
• [U-Boot] [PATCH v2 4/5] On-chip ROM boot: MPC8536DS support   Mingkai Hu
• [U-Boot] [PATCH v2 5/5] Add README.mpc8536ds   Mingkai Hu
• [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support   Mingkai Hu
• [U-Boot] [PATCH v1 0/3] Add support for saveing env variable to SDCard   Mingkai Hu
• [U-Boot] [PATCH v1 1/3] Make mmc init come before env_relocate   Mingkai Hu
• [U-Boot] [PATCH v1 2/3] Add support for save environment variable to MMC/SD card   Mingkai Hu
• [U-Boot] [PATCH v1 3/3] mpc8536: Get the address of env on the SDCard   Mingkai Hu
• [U-Boot] [PATCH v3 1/5] 85xx: add boot from NAND/eSDHC/eSPI support   Mingkai Hu
• [U-Boot] [PATCH v3 3/5] NAND boot: MPC8536DS support   Mingkai Hu
• [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Mingkai Hu
• [U-Boot] [PATCH v3 2/3] On-chip ROM boot: MPC8536DS support   Mingkai Hu
• [U-Boot] [PATCH v3 3/3] Add README.mpc8536ds   Mingkai Hu
• [U-Boot] [PATCH] mpc8536: simplify the top makefile for 36-bit config   Mingkai Hu
• [U-Boot] [PATCH] ppc/85xx: simplify the top makefile for 36-bit config for mpc8536ds   Mingkai Hu
• [U-Boot] [PATCH] ppc/85xx: add ld script file for boot from NAND   Mingkai Hu
• [U-Boot] [PATCH] ppc/85xx: add cpu init config file for boot from NAND   Mingkai Hu
• [U-Boot] [PATCH] immap_85xx: add porpllsr's plat ratio definition   Mingkai Hu
• [U-Boot] [PATCH] mpc8536: fix board config file line length   Mingkai Hu
• [U-Boot] [PATCH v4 1/3] NAND boot: MPC8536DS support   Mingkai Hu
• [U-Boot] [PATCH v4 2/3] On-chip ROM boot: MPC8536DS support   Mingkai Hu
• [U-Boot] [PATCH v4 3/3] Add README.mpc8536ds   Mingkai Hu
• [U-Boot] I2c imd/imw for a digital potentiometer?   Brian Hutchinson
• [U-Boot] I2c imd/imw for a digital potentiometer?   Brian Hutchinson
• [U-Boot] About DM6467_config   Kazuaki Ichinohe
• [U-Boot] [U-BOOT][Patch] DM9000 init for pm9261   Ilko Iliev
• [U-Boot] Your e-mail address has won:US$1,200,000.00   Euro-Millions International
• [U-Boot] lowlevel_init.s for ARM920t/S3C2410   J.Hwan.Kim
• [U-Boot] Hanging in kmalloc of nand_scan_tail() function   J.Hwan.Kim
• [U-Boot] nand_scan() in ARM9 S3C2410   J.Hwan.Kim
• [U-Boot] nand_scan() in ARM9 S3C2410   J.Hwan.Kim
• [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Mark Jackson
• [U-Boot] Virtual addresses, u-boot, and the MMU   Mark Jackson
• [U-Boot] U-Boot load and run via NAND flash - ARM926EJ-S   Thomas Jackson
• [U-Boot] API License Terms   Rafal Jaworowski
• [U-Boot] [PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards   Gary Jennejohn
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
• [U-Boot] [PATCH] OMAP3: Clean up whitespace in mux configs   Olof Johansson
• [U-Boot] ZOOM2 mux setup   Olof Johansson
• [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
• [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
• [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
• [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
• [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
• [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
• [U-Boot] smc911x runtime detection (was: TI: OMAP3: Overo Tobi ethernet support)   Olof Johansson
• [U-Boot] smc911x runtime detection (was: TI: OMAP3: Overo Tobi ethernet support)   Olof Johansson
• [U-Boot] [PATCH v3] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
• [U-Boot] [PATCH] OMAP3: Clean up whitespace in mux configs   Olof Johansson
• [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Simon Kagstrom
• [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Simon Kagstrom
• [U-Boot] U-boot environment on Sheevaplug   Simon Kagstrom
• [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Simon Kagstrom
• [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Simon Kagstrom
• [U-Boot] [PATCH, RFC] Make arm926ejs use -march=armv5t to avoid problems with EABI   Simon Kagstrom
• [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Simon Kagstrom
• [U-Boot] [PATCH] ARM: compiler options cleanup - improve tool chain support   Simon Kagstrom
• [U-Boot] [PATCH v4 4/4]: arm: Define test_and_set_bit and test_and_clear bit for ARM   Simon Kagstrom
• [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Simon Kagstrom
• [U-Boot] [PATCH] ARM: compiler options cleanup - improve tool chain support   Simon Kagstrom
• [U-Boot] [PATCH] Support for the OpenRD base board   Simon Kagstrom
• [U-Boot] [PATCH v2] Support for the OpenRD base board   Simon Kagstrom
• [U-Boot] [PATCH v2] Support for the OpenRD base board   Simon Kagstrom
• [U-Boot] [PATCH v2] Support for the OpenRD base board   Simon Kagstrom
• [U-Boot] [PATCH v3] Support for the OpenRD base board   Simon Kagstrom
• [U-Boot] [PATCH, RFC] Make arm926ejs use -march=armv5t to avoid problems with EABI   Simon Kagstrom
• [U-Boot] [PATCH] ubifs: Add support for looking up directory and relative symlinks   Simon Kagstrom
• [U-Boot] UBIFS LZO decompression failure   Simon Kagstrom
• [U-Boot] [PATCH v4 3/4]: Define ffs/fls for all architectures   Simon Kagstrom
• [U-Boot] [PATCH v4 3/4]: Define ffs/fls for all architectures   Simon Kagstrom
• [U-Boot] [PATCH] Correct ffs/fls regression for PowerPC etc   Simon Kagstrom
• [U-Boot] [PATCH] arm: Correct build with CONFIG_SYS_HUSH_PARSER set   Simon Kagstrom
• [U-Boot] [PATCH v2] Correct ffs/fls regression for PowerPC etc   Simon Kagstrom
• [U-Boot] [PATCH v2] Correct ffs/fls regression for PowerPC etc   Simon Kagstrom
• [U-Boot] [PATCH v4] Support for the OpenRD base board   Simon Kagstrom
• [U-Boot] [PATCH, RFC] Make arm926ejs use -march=armv5t to avoid problems with EABI   Simon Kagstrom
• [U-Boot] [PATCH] arm: Correct build with CONFIG_SYS_HUSH_PARSER set   Simon Kagstrom
• [U-Boot] [PATCH] ubifs: Correct dereferencing of files-after-symlinks   Simon Kagstrom
• [U-Boot] [RFC] Detecting coldstart on kirkwood CPUs   Simon Kagstrom
• [U-Boot] [PATCH] arm:kirkwood: Add hardware watchdog support for Marvell Kirkwood boards   Simon Kagstrom
• [U-Boot] [PATCH] arm:kirkwood: Add hardware watchdog support for Marvell Kirkwood boards   Simon Kagstrom
• [U-Boot] [PATCH] arm:kirkwood: Add hardware watchdog support for Marvell Kirkwood boards   Simon Kagstrom
• [U-Boot] [PATCH] arm:kirkwood: Add hardware watchdog support for Marvell Kirkwood boards   Simon Kagstrom
• [U-Boot] kirkwood (openrd): saveenv will not work with environment in NAND   Simon Kagstrom
• [U-Boot] kirkwood (openrd): saveenv will not work with environment in NAND   Simon Kagstrom
• [U-Boot] kirkwood (openrd): saveenv will not work with environment in NAND   Simon Kagstrom
• [U-Boot] kirkwood (openrd): saveenv will not work with environment in NAND   Simon Kagstrom
• [U-Boot] [PATCH 1/4] s5pc1xx: support Samsung s5pc1xx SoC   Minkyu Kang
• [U-Boot] [PATCH 2/4] s5pc1xx: support onenand driver   Minkyu Kang
• [U-Boot] [PATCH 3/4] s5pc1xx: support serial driver   Minkyu Kang
• [U-Boot] [PATCH 4/4] s5pc1xx: add support SMDKC100 board   Minkyu Kang
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Minkyu Kang
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Minkyu Kang
• [U-Boot] [PATCH 4/4] s5pc1xx: add support SMDKC100 board   Minkyu Kang
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Minkyu Kang
• [U-Boot] RFC: split ARM repo and distribute workload   Minkyu Kang
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Minkyu Kang
• [U-Boot] [PATCH 4/4] s5pc1xx: add support SMDKC100 board   Minkyu Kang
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Minkyu Kang
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Minkyu Kang
• [U-Boot] [PATCH 1/4 v2] s5pc1xx: support Samsung s5pc1xx SoC   Minkyu Kang
• [U-Boot] [PATCH 2/4 v2] s5pc1xx: support onenand driver   Minkyu Kang
• [U-Boot] [PATCH 3/4 v2] s5pc1xx: support serial driver   Minkyu Kang
• [U-Boot] [PATCH 4/4 v2] s5pc1xx: add support SMDKC100 board   Minkyu Kang
• [U-Boot] [PATCH 1/4 v2] s5pc1xx: support Samsung s5pc1xx SoC   Minkyu Kang
• [U-Boot] [PATCH 4/4 v2] s5pc1xx: add support SMDKC100 board   Minkyu Kang
• [U-Boot] [PATCH 3/4 v2] s5pc1xx: support serial driver   Minkyu Kang
• [U-Boot] [PATCH 2/4 v2] s5pc1xx: support onenand driver   Minkyu Kang
• [U-Boot] I found an error   Minkyu Kang
• [U-Boot] [PATCH 3/4 v2] s5pc1xx: support serial driver   Minkyu Kang
• [U-Boot] I found an error   Minkyu Kang
• [U-Boot] nand_scan() in ARM9 S3C2410   Minkyu Kang
• [U-Boot] [PATCH 1/4 v3] s5pc1xx: support Samsung s5pc1xx SoC   Minkyu Kang
• [U-Boot] [PATCH 2/4 v3] s5pc1xx: support onenand driver   Minkyu Kang
• [U-Boot] [PATCH 3/4 v3] s5pc1xx: support serial driver   Minkyu Kang
• [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Minkyu Kang
• [U-Boot] [PATCH 1/4 v3] s5pc1xx: support Samsung s5pc1xx SoC   Minkyu Kang
• [U-Boot] [PATCH 3/4 v3] s5pc1xx: support serial driver   Minkyu Kang
• [U-Boot] [PATCH 2/4 v3] s5pc1xx: support onenand driver   Minkyu Kang
• [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Minkyu Kang
• [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Minkyu Kang
• [U-Boot] [PATCH 3/4 v3] s5pc1xx: support serial driver   Minkyu Kang
• [U-Boot] [PATCH-ARM 1/4, v2] Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code   Minkyu Kang
• [U-Boot] [PATCH] Support for Micrel/Kendin KS899xM managed switches.   Sami Kantoluoto
• [U-Boot] [PATCH] AT91: Add SD/MMC controller support   Sami Kantoluoto
• [U-Boot] [PATCH] AT91: Add SD/MMC controller support   Sami Kantoluoto
• [U-Boot] [PATCH] MCI support for AT91 family processors.   Sami Kantoluoto
• [U-Boot] u-boot support for Intel Atom based boards.   Sharad P. Katti
• [U-Boot] u-boot support for Intel Atom based boards.   Sharad P. Katti
• [U-Boot] kirkwood (openrd): saveenv will not work with environment in NAND   Dieter Kiermaier
• [U-Boot] kirkwood (openrd): saveenv will not work with environment in NAND   Dieter Kiermaier
• [U-Boot] kirkwood (openrd): saveenv will not work with environment in NAND   Dieter Kiermaier
• [U-Boot] kirkwood (openrd): saveenv will not work with environment in NAND   Dieter Kiermaier
• [U-Boot] kirkwood (openrd): saveenv will not work with environment in NAND   Dieter Kiermaier
• [U-Boot] kirkwood (openrd): saveenv will not work with environment in NAND   Dieter Kiermaier
• [U-Boot] Flash sanity checks   Dieter Kiermaier
• [U-Boot] Compile for SPARC Leon3 fails with *** No rule to make target ... ***   Kraitschy, Tobias
• [U-Boot] Compile for SPARC Leon3 fails with *** No rule to make target ... ***   Kraitschy, Tobias
• [U-Boot] how to apply at91 patch for the current u-boot-2009-06?   Ravi Kumar Kulkarni
• [U-Boot] help command not working in u-boot   Rupesh Kumar
• [U-Boot] help command not working in u-boot   Rupesh Kumar
• [U-Boot] [PATCH] MIPS: VCT: Remove read_spareram reference   Shinya Kuribayashi
• [U-Boot] [PATCH v2] MIPS: VCT: Remove read_spareram reference   Shinya Kuribayashi
• [U-Boot] [PATCH 00/13] ppc: Fix relocation   Swarthout Edward L-SWARTHOU
• [U-Boot] REF:UKHY/BD3113BD   UK NATIONAL LOTTERY
• [U-Boot] OMAP3, RFBI, splash screen   Sergey Lapin
• [U-Boot] Obtaining board specific phy diagnostics   Matthew Lear
• [U-Boot] Obtaining board specific phy diagnostics   Matthew Lear
• [U-Boot] [PATCH] board/linkstation/ide.c: Fix compile warning   Guennadi Liakhovetski
• [U-Boot] [PATCH][v2] FDT: remove obsolete OF_CPU and OF_SOC macros.   Guennadi Liakhovetski
• [U-Boot] [PATCH] board/linkstation/ide.c: Fix compile warning   Guennadi Liakhovetski
• [U-Boot] [PATCH v2] board/linkstation/ide.c: Fix compile warning   Guennadi Liakhovetski
• [U-Boot] [PATCH v2] board/linkstation/ide.c: Fix compile warning   Guennadi Liakhovetski
• [U-Boot] [PATCH v2] board/linkstation/ide.c: Fix compile warning   Guennadi Liakhovetski
• [U-Boot] RFC: split ARM repo and distribute workload   Magnus Lilja
• [U-Boot] [PATCH v2] mx27ads: add support for iMX27ADS board from Freescale   Magnus Lilja
• [U-Boot] [PATCH] imx51:Add support basic boot code of freescale imx51 bbg board   Magnus Lilja
• [U-Boot] [PATCH] imx51:Add support basic boot code of freescale imx51 bbg board   Magnus Lilja
• [U-Boot] [PATCH] imx51:Add support basic boot code of freescale imx51 bbg board   Magnus Lilja
• [U-Boot] sh7760 platform   Luca Luminari
• [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Ken MacLeod
• [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Ken MacLeod
• [U-Boot] [PATCH v2] cmd_fdt.c: fix parse of byte streams and strings   Ken MacLeod
• [PATCH] part_dos: check status flags of partitions   Daniel Mack
• [U-Boot] [PATCH] part_dos: check status flags of partitions   Daniel Mack
• [U-Boot] [PATCH] 85xx-fdt: Fixed l2-ctlr's compatible prop for QorIQ   Vivek Mahajan
• [U-Boot] LZMA support   Luigi Mantellini
• [U-Boot] [PATCH] MII Bus BitBang Imlementation for MPC85xx FCC ports   Luigi 'Comio' Mantellini
• [U-Boot] [PATCH] Add MII bus implementation for FCC ports (using bitbanging)   Luigi 'Comio' Mantellini
• [U-Boot] [PATCH] MII Bus BitBang Imlementation for MPC85xx FCC ports   Luigi 'Comio' Mantellini
• [U-Boot] [PATCH] Add MII bus implementation for FCC ports (using bitbanging)   Luigi 'Comio' Mantellini
• [U-Boot] [PATCH 0/3] New MIIPHYBB implementation with multi-bus support   Luigi 'Comio' Mantellini
• [U-Boot] [PATCH 1/3] Bit-banged MII driver with multi-bus support.   Luigi 'Comio' Mantellini
• [U-Boot] [PATCH 2/3] Add bb_miiphy_init call before any ethernet bring-up code.   Luigi 'Comio' Mantellini
• [U-Boot] [PATCH 3/3] Update all board to support new bbmiiphy driver (with multibus support)   Luigi 'Comio' Mantellini
• [U-Boot] [PATCH 0/3 v2] New MIIPHYBB implementation with multi-bus support   Luigi 'Comio' Mantellini
• [U-Boot] [PATCH 1/3 v2] Bit-banged MII driver with multi-bus support.   Luigi 'Comio' Mantellini
• [U-Boot] [PATCH 2/3 v2] Add bb_miiphy_init call before any ethernet bring-up code.   Luigi 'Comio' Mantellini
• [U-Boot] [PATCH 3/3 v2] Update all board to support new bbmiiphy driver (with multibus support)   Luigi 'Comio' Mantellini
• [U-Boot] [PATCH 0/3 v3] New MIIPHYBB implementation with multi-bus support   Luigi 'Comio' Mantellini
• [U-Boot] [PATCH 1/3 v3] Bit-banged MII driver with multi-bus support.   Luigi 'Comio' Mantellini
• [U-Boot] [PATCH 2/3 v3] Add bb_miiphy_init call before any ethernet bring-up code.   Luigi 'Comio' Mantellini
• [U-Boot] [PATCH 3/3 v3] Update all board to support new bbmiiphy driver (with multibus support)   Luigi 'Comio' Mantellini
• [U-Boot] [PATCH 1/3 v3] Bit-banged MII driver with multi-bus support.   Luigi 'Comio' Mantellini
• [U-Boot] imx27lite stability problems.   javier Martin
• [U-Boot] imx27lite stability problems.   javier Martin
• [U-Boot] [PATCH v2] mx27ads: add support for iMX27ADS board from Freescale   javier Martin
• [U-Boot] imx27lite stability problems.   javier Martin
• [U-Boot] imx27lite stability problems.   javier Martin
• [U-Boot] [PATCH] Rename CONFIG_SYS_MDDRC memory constants for all mpc512x boards   Martha J Marx
• [U-Boot] Question AT91SAM9G20 boot from SD   Konrad Mattheis
• [U-Boot] Question AT91SAM9G20 boot from SD   Konrad Mattheis
• [U-Boot] [PATCH v2] AT91: Add SD/MMC controller support & [PATCH v3]   Konrad Mattheis
• [U-Boot] [PATCH v3] AT91: Problems with SD   Konrad Mattheis
• [U-Boot] nash   Konrad Mattheis
• [U-Boot] (no subject)   Konrad Mattheis
• [U-Boot] SD Card in Spi mode boot mpc8315   Konrad Mattheis
• [U-Boot] [PATCH v1 1/3] Make mmc init come before env_relocate   Konrad Mattheis
• [U-Boot] [PATCH v1 1/3] Make mmc init come before env_relocate   Konrad Mattheis
• [U-Boot] No NAND device found!!! Freescale MPC8544+SAMSUNG 1GB Nand Flash , please help!   Bin Meng
• [U-Boot] [PATCH v2] ppc/85xx: PIO Support for FSL eSDHC Controller Driver   Bin Meng
• [U-Boot] OMAP3, RFBI, splash screen   Nishanth Menon
• [U-Boot] [PATCH 0/6] ARM:OMAP3:SDP3430 initial support   Nishanth Menon
• [U-Boot] [PATCH 1/6] OMAP3: Fix SDRC init   Nishanth Menon
• [U-Boot] [PATCH 2/6] OMAP3: export enable_gpmc_cs_config to board files   Nishanth Menon
• [U-Boot] [PATCH 3/6] OMAP3: make gpmc_config as const   Nishanth Menon
• [U-Boot] [PATCH 4/6] OMAP3: fix warnings when NAND/ONENAND is not used   Nishanth Menon
• [U-Boot] [PATCH 5/6] DLMALLOC:!X86: add av_ initialization   Nishanth Menon
• [U-Boot] [PATCH 6/6] ARM:OMAP3:SDP3430: initial support   Nishanth Menon
• [U-Boot] [PATCH 5/6] DLMALLOC:!X86: add av_ initialization   Nishanth Menon
• [U-Boot] [PATCH 6/6] ARM:OMAP3:SDP3430: initial support   Nishanth Menon
• [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Nishanth Menon
• [U-Boot] [PATCH 6/6] ARM:OMAP3:SDP3430: initial support   Nishanth Menon
• [U-Boot] [PATCH 5/6] DLMALLOC:!X86: add av_ initialization   Nishanth Menon
• [PATCH] [RFC] OMAP3:EVM: remove direct gpio hits   Nishanth Menon
• [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Nishanth Menon
• [U-Boot] [PATCH v2] Reset i2c slave devices during init on mpc5xxx cpus   Eric Millbrandt
• [U-Boot] [PATCH] Add version variable to the galaxy5200 board.   Eric Millbrandt
• [U-Boot] [PATCH] galaxy5200: change cs1 configuration   Eric Millbrandt
• [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Hu Mingkai-B21284
• [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Hu Mingkai-B21284
• [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Hu Mingkai-B21284
• [U-Boot] 答复: [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Hu Mingkai-B21284
• [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support   Hu Mingkai-B21284
• [U-Boot] [PATCH v2 3/5] NAND boot: MPC8536DS support   Hu Mingkai-B21284
• [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Hu Mingkai-B21284
• [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support   Hu Mingkai-B21284
• [U-Boot] [PATCH v2 3/5] NAND boot: MPC8536DS support   Hu Mingkai-B21284
• [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Hu Mingkai-B21284
• [U-Boot] [RFC][PATCH] NAND boot: MPC8536DS support   Hu Mingkai-B21284
• [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Hu Mingkai-B21284
• [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Hu Mingkai-B21284
• [U-Boot] fls definition issue   Hu Mingkai-B21284
• [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Hu Mingkai-B21284
• [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Hu Mingkai-B21284
• [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Hu Mingkai-B21284
• [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Hu Mingkai-B21284
• [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Hu Mingkai-B21284
• [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Hu Mingkai-B21284
• [U-Boot] [PATCH v3 3/5] NAND boot: MPC8536DS support   Hu Mingkai-B21284
• [U-Boot] [PATCH v1 3/3] mpc8536: Get the address of env on the SDCard   Hu Mingkai-B21284
• [U-Boot] [PATCH v1 1/3] Make mmc init come before env_relocate   Hu Mingkai-B21284
• [U-Boot] [PATCH v1 2/3] Add support for save environment variable to MMC/SD card   Hu Mingkai-B21284
• [PATCH] Fix bug in jumptable call stubs for SPARC. Seems, that i am the first who tested it.   Sergey Mironov
• [PATCH] Fix bug in jumptable call stubs for SPARC.   Sergey Mironov
• [U-Boot] [PATCH] ppc/85xx: Fix LCRR_CLKDIV defines   Chris Moore
• [U-Boot] mpc8572ds: Stuck startup   Isaac Gomez Morales
• [U-Boot] [PATCH MAKEALL coldfire] : Fix start.S:Error: Conversion of PC relative displacement to absolute   Philippe De Muyter
• [U-Boot] [PATCH MAKEALL coldfire] fix tools/kwbimage.c format warning   Philippe De Muyter
• [U-Boot] [PATCH MAKEALL coldfire] fix cmd_bdinfo.c:354: warning: 'print_eth' defined but not used   Philippe De Muyter
• [U-Boot] [PATCH MAKEALL coldfire] fix tools/kwbimage.c format warning   Philippe De Muyter
• [U-Boot] [PATCH MAKEALL coldfire] fix tools/kwbimage.c format warning   Philippe De Muyter
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Stephen Neuendorffer
• [U-Boot] [PATCH v6 2/2] arm: A320: Add support for Faraday A320 evaluation board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] imx27lite: add support for imx27lite board from LogicPD   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v3] arm: Kirkwood: add SYSRSTn Duration Counter Support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v8] Support for the Calao TNY-A9260/TNY-A9G20 boards   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91sam9260/afeb9260: Fix SPI initialization   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/4] s5pc1xx: support serial driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/4] s5pc1xx: add support SMDKC100 board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] RFC: split ARM repo and distribute workload   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Add support for the DevKit8000 board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Add support for the Calao SBC35-A9G20 board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] AT91: Add support for blue_LED_* and add coloured_LED_init to at91/led.c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/8] TWL4030 Add usb PHY support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/8] OMAP3 Add usb device support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 5/8] OMAP3 zoom1 Add usbtty configuration   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 6/8] OMAP3 beagle Add usbtty configuration   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 8/8] OMAP3 zoom2 Use usbtty if the debug board is not connected.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/8] USB add macros for debugging usb device setup.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH, RFC] Make arm926ejs use -march=armv5t to avoid problems with EABI   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Interrupts in uboot with ARM AT91SAM9 (V2)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] MCI support for AT91 family processors.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] MCI support for AT91 family processors.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4 0/4]: bitops cleanup and fixes   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: move base address define to soc header   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] AT91: Add support for blue_LED_* and add coloured_LED_init to at91/led.c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Warning in omap3_mmc.c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Add support for Eukrea CPU9260/CPU9G20 SBC   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/8] OMAP3 Add usb device support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/8] TWL4030 Add usb PHY support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4 4/4]: arm: Define test_and_set_bit and test_and_clear bit for ARM   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/3] omap: move TI's boards to board/ti/   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4 0/4]: bitops cleanup and fixes   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] RFC: split ARM repo and distribute workload   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] tftp packet failure counter reset   Jeffery Palmer
• [U-Boot] tftp packet failure counter reset   Jeffery Palmer
• [U-Boot] Our competition sells these lists for $2500 and more   Luciano U Palmer
• [U-Boot] USB device support for OMAP3   Pandita, Vikram
• [U-Boot] [PATCH] [OneNAND] Board can override OneNAND IPL image   Kyungmin Park
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Kyungmin Park
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Kyungmin Park
• [U-Boot] [PATCH 2/4] s5pc1xx: support onenand driver   Kyungmin Park
• [U-Boot] [PATCH 4/4] s5pc1xx: add support SMDKC100 board   Kyungmin Park
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Kyungmin Park
• [U-Boot] RFC: split ARM repo and distribute workload   Kyungmin Park
• [U-Boot] Flashing images bigger than ram   Kyungmin Park
• [U-Boot] [PATCH] [OneNAND] Board can override OneNAND IPL image   Kyungmin Park
• [U-Boot] [PATCH] [OneNAND IPL] OneNAND board init support   Kyungmin Park
• [U-Boot] [PATCH] [OneNAND IPL] OneNAND board init support   Kyungmin Park
• [U-Boot] [PATCH] [OneNAND IPL] Refactor OneNAND IPL code   Kyungmin Park
• [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Kyungmin Park
• [U-Boot] [PATCH 2/4 v3] s5pc1xx: support onenand driver   Kyungmin Park
• [U-Boot] [PATCH 2/2] MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST   Paulraj, Sandeep
• [U-Boot] RFC: split ARM repo and distribute workload   Paulraj, Sandeep
• [U-Boot] RFC: split ARM repo and distribute workload   Paulraj, Sandeep
• [U-Boot] "All rights reserved" in drivers/mtd/nand/nand_util.c   Paulraj, Sandeep
• [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Paulraj, Sandeep
• [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Paulraj, Sandeep
• [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Paulraj, Sandeep
• [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Paulraj, Sandeep
• [U-Boot] [PATCH v2] TI DaVinci: DM355: Config Cleanup and Update   Paulraj, Sandeep
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Paulraj, Sandeep
• [U-Boot] [PATCH] TI DaVinci: DM6446: Fix Compilation error in NAND mode   Paulraj, Sandeep
• [U-Boot] [PATCH] OMAP3 Move cache routines to cache.S   Paulraj, Sandeep
• [U-Boot] [PATCH] TI DaVinci: DM646x: Initial Support for DM646x SOC   Paulraj, Sandeep
• [U-Boot] "All rights reserved" in drivers/mtd/nand/nand_util.c   Paulraj, Sandeep
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Paulraj, Sandeep
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Paulraj, Sandeep
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Paulraj, Sandeep
• [U-Boot] [PATCH] OMAP3 Overo: Fix ethernet related warnings   Paulraj, Sandeep
• [U-Boot] [PATCH] TI: DaVinci DM365: Enabling net support on DM365   Paulraj, Sandeep
• [U-Boot] [PATCH] OMAP3 MMC: Fix warning dereferencing type-punned pointer   Paulraj, Sandeep
• [U-Boot] [PATCH] TI: DaVinci: Adding GIO addresses to header file   Paulraj, Sandeep
• [U-Boot] [PATCH] TI DaVinci DM365: Removing header file which does not exist   Paulraj, Sandeep
• [U-Boot] [PATCH] TI: DaVinci DM365: Minor config cleanup   Paulraj, Sandeep
• [U-Boot] [PATCH] OMAP3 MMC: Fix warning dereferencing type-punned pointer   Paulraj, Sandeep
• [U-Boot] [PATCH] TI: DaVinci: DM355 Leopard board support   Paulraj, Sandeep
• [U-Boot] [PATCH] TI: DaVinci DM365: Enabling net support on DM365   Paulraj, Sandeep
• [U-Boot] [PATCH 6/6] ARM:OMAP3:SDP3430: initial support   Paulraj, Sandeep
• [U-Boot] [PATCH] TI: DaVinci: DM646x: Update flag used to represent DM646x SOC's   Paulraj, Sandeep
• [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Paulraj, Sandeep
• [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Paulraj, Sandeep
• [U-Boot] Applying u-boot-ti patches (was: [PATCH v2] TI: OMAP3: Overo Tobi ethernet support)   Paulraj, Sandeep
• [U-Boot] Applying u-boot-ti patches   Paulraj, Sandeep
• [U-Boot] [PATCH v3] TI: OMAP3: Overo Tobi ethernet support   Paulraj, Sandeep
• [U-Boot] [PATCH v3] TI: DaVinci DM365: Enabling network Support on DM365 EVM   Paulraj, Sandeep
• [U-Boot] About DM6467_config   Paulraj, Sandeep
• [U-Boot] About DM6467_config   Paulraj, Sandeep
• [U-Boot] [PATCH] TI: DaVinci: GPIO header file and definitions   Paulraj, Sandeep
• [U-Boot] [PATCH] Support for Calao USB A9263 board based on AT91SAM9263 CPU   Thomas Petazzoni
• [U-Boot] [PATCH 4/5] mpc83xx: mpc8360emds: Use RGMII mode, add workarounds for rev. 2.1 CPUs   Kim Phillips
• [PATCH] mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields   Kim Phillips
• [U-Boot] [PATCH] mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields (was: Re: [PATCH v3] mpc83xx: update LCRR register handling)   Kim Phillips
• [PATCH] mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields   Kim Phillips
• [U-Boot] [PATCH 4/5] mpc83xx: mpc8360emds: Use RGMII mode, add workarounds for rev. 2.1 CPUs   Kim Phillips
• [U-Boot] [PATCH] sbc8349: tidy up Makefile to use new configuration script.   Kim Phillips
• [U-Boot] Please pull u-boot-mpc83xx.git   Kim Phillips
• [U-Boot] [PATCH] mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields   Kim Phillips
• [U-Boot] [PATCH] mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields   Kim Phillips
• [U-Boot] Please pull u-boot-mpc83xx.git   Kim Phillips
• [U-Boot] [PATCH][v1] ppc/85xx, 86xx: Handling Unknown SOC version   Aggrwal Poonam-B10812
• [U-Boot] build failure on denx top   Aggrwal Poonam-B10812
• [U-Boot] Blackfin: UART on SPORT   Andreas Pretzsch
• [U-Boot] PPC440GX: DDR ECC init time.   Felix Radensky
• [U-Boot] PPC440GX: DDR ECC init time.   Felix Radensky
• [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Felix Radensky
• [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Felix Radensky
• [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Felix Radensky
• [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Felix Radensky
• [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Felix Radensky
• [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Felix Radensky
• [U-Boot] [PATCH] ppc4xx: Reorganize DDR2 ECC handling   Felix Radensky
• [U-Boot] [PATCH] ppc4xx: Merge PPC4xx DDR and DDR2 ECC handling   Felix Radensky
• [U-Boot] [PATCH] ppc4xx: Merge PPC4xx DDR and DDR2 ECC handling   Felix Radensky
• [U-Boot] Firmware Upgrade   Rahanesh
• [U-Boot] Firmware Upgrade   Rahanesh
• [U-Boot] error in fw_printenv   Rahanesh
• [U-Boot] error in fw_printenv   Rahanesh
• [U-Boot] error in fw_printenv   Rahanesh
• [U-Boot] Compilation error for fw_printenv   Rahanesh
• [U-Boot] error in fw_printenv   Rahanesh
• [U-Boot] Compilation error for fw_printenv   Rahanesh
• [U-Boot] Details of fw_env.config file   Rahanesh
• [U-Boot] Warning Bad CRC   Rahanesh
• [U-Boot] Warning Bad CRC   Rahanesh
• [U-Boot] Warning Bad CRC   Rahanesh
• [U-Boot] Warning Bad CRC   Rahanesh
• [U-Boot] [PATCH 2/2] MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST   John Rigby
• [U-Boot] [PATCH 2/2] MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST   John Rigby
• [U-Boot] [PATCH 2/2] MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST   John Rigby
• [U-Boot] More davinci 4-bit hw ecc questions   John Rigby
• [U-Boot] More davinci 4-bit hw ecc questions   John Rigby
• [U-Boot] More davinci 4-bit hw ecc questions   John Rigby
• [U-Boot] [PATCH v2] TI DaVinci: DM355: Config Cleanup and Update   John Rigby
• [U-Boot] [PATCH] Nand: Implement raw read/write and biterr   John Rigby
• [U-Boot] [PATCH] Nand: Implement raw read/write and biterr   John Rigby
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Jean-Christian de Rivaz
• [U-Boot] [PATCH 1/8] USB Consolidate descriptor definitions   Tom Rix
• [U-Boot] [PATCH 2/8] USB add macros for debugging usb device setup.   Tom Rix
• [U-Boot] [PATCH 3/8] TWL4030 Add usb PHY support   Tom Rix
• [U-Boot] [PATCH 4/8] OMAP3 Add usb device support   Tom Rix
• [U-Boot] [PATCH 5/8] OMAP3 zoom1 Add usbtty configuration   Tom Rix
• [U-Boot] [PATCH 6/8] OMAP3 beagle Add usbtty configuration   Tom Rix
• [U-Boot] [PATCH 7/8] USBTTY make some function declarations easier to use.   Tom Rix
• [U-Boot] [PATCH 8/8] OMAP3 zoom2 Use usbtty if the debug board is not connected.   Tom Rix
• [U-Boot] TI OMAP3 Fixing i2c initialization.   Tom Rix
• [U-Boot] [PATCH 1/1] TI OMAP3 Use arm init sequence to initialize i2c   Tom Rix
• [U-Boot] V2 of OMAP3 USB device Support   Tom Rix
• [U-Boot] [PATCH 1/8] USB Consolidate descriptor definitions   Tom Rix
• [U-Boot] [PATCH 2/8] USB add macros for debugging usb device setup.   Tom Rix
• [U-Boot] [PATCH 3/8] TWL4030 Add usb PHY support   Tom Rix
• [U-Boot] [PATCH 4/8] OMAP3 Add usb device support   Tom Rix
• [U-Boot] [PATCH 5/8] OMAP3 zoom1 Add usbtty configuration   Tom Rix
• [U-Boot] [PATCH 6/8] OMAP3 beagle Add usbtty configuration   Tom Rix
• [U-Boot] [PATCH 7/8] USBTTY make some function declarations easier to use.   Tom Rix
• [U-Boot] [PATCH 8/8] OMAP3 zoom2 Use usbtty if the debug board is not connected.   Tom Rix
• [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Stefan Roese
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Stefan Roese
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Stefan Roese
• [U-Boot] PPC440GX: DDR ECC init time.   Stefan Roese
• [U-Boot] PPC440GX: DDR ECC init time.   Stefan Roese
• [U-Boot] MTD compile error   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Fix compilation warning in 4xx miiphy.c   Stefan Roese
• [U-Boot] PPC440GX: DDR ECC init time.   Stefan Roese
• [U-Boot] [PATCH v2] ppc4xx: Rename compactcenter to intip   Stefan Roese
• [U-Boot] [PATCH] amcc-common.h: Use filenames from environment variables for update procedure.   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Fix PMC405DE support   Stefan Roese
• [U-Boot] [PATCH 1/2] ppc4xx: Allow overwriting pci target registers for all 4xx boards   Stefan Roese
• [U-Boot] [PATCH 2/2] ppc4xx: Add CONFIG_PCI_4xx_PTM_OVERWRITE to some esd 4xx boards   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Fix compilation warning in 4xx miiphy.c   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx   Stefan Roese
• [U-Boot] PPC440GX: DDR ECC init time.   Stefan Roese
• [U-Boot] PPC440GX: DDR ECC init time.   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Big cleanup of PPC4xx defines   Stefan Roese
• [U-Boot] [PATCH] net: Fix problem with 405EZ ethernet interrupt   Stefan Roese
• [U-Boot] Please pull ppc4xx/master   Stefan Roese
• [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Stefan Roese
• [U-Boot] [PATCH v4] ppc4xx: Rename compactcenter to intip   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Big cleanup of PPC4xx defines   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx   Stefan Roese
• [U-Boot] [PATCH] board/esd/common/flash.c: Fix compile warning   Stefan Roese
• [U-Boot] [PATCH] board/amcc/common/flash.c: Fix compile warning   Stefan Roese
• [U-Boot] [PATCH] board/amcc/taihu/flash.c: Fix compile warning   Stefan Roese
• [U-Boot] [PATCH] board/amcc/yucca/flash.c: Fix compile warning   Stefan Roese
• [U-Boot] [PATCH] board/esd/cpci750/ide.c: fix compile warning   Stefan Roese
• [U-Boot] configure ppc440spe as pci adapter   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Fix 405EZ uart base baud calculation   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Enable commands for FDT enabled Linux booting on AMCC Acadia   Stefan Roese
• [U-Boot] [PATCH] MIPS: VCT: Remove read_spareram reference   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Consolidate get_OPB_freq()   Stefan Roese
• [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Stefan Roese
• [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Stefan Roese
• [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Stefan Roese
• [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Stefan Roese
• [U-Boot] [PATCH] kwbimage.c: Fix compile warning when building on 32/64 bit systems   Stefan Roese
• [U-Boot] [STATUS] RFC: stretch merge window?   Stefan Roese
• [U-Boot] [PATCH v4 3/4]: Define ffs/fls for all architectures   Stefan Roese
• [U-Boot] [PATCH v4 3/4]: Define ffs/fls for all architectures   Stefan Roese
• [U-Boot] [PATCH v4 3/4]: Define ffs/fls for all architectures   Stefan Roese
• [U-Boot] fls definition issue   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Fix 405EZ uart base baud calculation   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Enable commands for FDT enabled Linux booting on AMCC Acadia   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Consolidate get_OPB_freq()   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx   Stefan Roese
• [U-Boot] [PATCH] Correct ffs/fls regression for PowerPC etc   Stefan Roese
• [U-Boot] [PATCH v2] Correct ffs/fls regression for PowerPC etc   Stefan Roese
• [U-Boot] [PATCH v2] Correct ffs/fls regression for PowerPC etc   Stefan Roese
• [U-Boot] AMCC 405EX - EMAC0 + EMAC1 Problems   Stefan Roese
• [U-Boot] [PATCH 00/13] ppc: Fix relocation   Stefan Roese
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Stefan Roese
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Stefan Roese
• [U-Boot] [PATCH] vxworks: Add CONFIG_VXWORKS_PREBOOT   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Make DDR2 timing for intip more robust   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Fix PCIE PLL lock on 440SPe Yucca board   Stefan Roese
• [U-Boot] [PATCH] ubifs: Add support for looking up directory and relative symlinks   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx   Stefan Roese
• [U-Boot] Please pull u-boot-ubi   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: HCU5 board: add register dump   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Netstal boards: various cleanups   Stefan Roese
• [U-Boot] ppc4xx: Convert PPC4xx UIC defines from lower case to upper case   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: HCU5 board: add register dump   Stefan Roese
• [U-Boot] ppc4xx: Convert PPC4xx UIC defines from lower case to upper case   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Add command 440epx_r   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: HCU5 board: add register dump   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Convert PPC4xx SDRAM defines from lower case to upper case   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Remove mtsdram0() marcos and use common mtsdram() instead   Stefan Roese
• [U-Boot] [PATCH, RFC] Make arm926ejs use -march=armv5t to avoid problems with EABI   Stefan Roese
• [U-Boot] [PATCH 00/13] ppc: Fix relocation   Stefan Roese
• [U-Boot] [PATCH 00/13] ppc: Fix relocation   Stefan Roese
• [U-Boot] ppc4xx: Convert PPC4xx UIC defines from lower case to upper case   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Convert PPC4xx SDRAM defines from lower case to upper case   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Remove mtsdram0() marcos and use common mtsdram() instead   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/master   Stefan Roese
• [U-Boot] [PATCH] ubifs: Correct dereferencing of files-after-symlinks   Stefan Roese
• [U-Boot] Please pull u-boot-ubi/master   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Reorganize DDR2 ECC handling   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Merge PPC4xx DDR and DDR2 ECC handling   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Merge PPC4xx DDR and DDR2 ECC handling   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Merge PPC4xx DDR and DDR2 ECC handling   Stefan Roese
• [U-Boot] [PATCH v2] ppc4xx: Merge PPC4xx DDR and DDR2 ECC handling   Stefan Roese
• [U-Boot] [PATCH] arm:kirkwood: Add hardware watchdog support for Marvell Kirkwood boards   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Add SDRAM detection for PMC440 boards   Stefan Roese
• [U-Boot] Flash sanity checks   Stefan Roese
• [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Zang Roy-R61911
• [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Zang Roy-R61911
• [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Zang Roy-R61911
• [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Zang Roy-R61911
• [U-Boot] [PATCH] Nomadik: fix reset_timer()   Alessandro Rubini
• [U-Boot] GPL 'All Rights Reserved' Cleanup - AMD derived code   Graeme Russ
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Graeme Russ
• [U-Boot] [PATCH 3/6] sbc8548: use I/O accessors   Graeme Russ
• [U-Boot] [PATCH 3/6] sbc8548: use I/O accessors   Graeme Russ
• [U-Boot] [RFC][PATCH 0/8] i386 Full Relocation   Graeme Russ
• [U-Boot] [RFC][PATCH 1/8] Fix gcc 4.4.1 compiler warning   Graeme Russ
• [U-Boot] [RFC][PATCH 2/8] Add low-level progress indications   Graeme Russ
• [U-Boot] [RFC][PATCH 3/8] Fix i386 malloc initialisation   Graeme Russ
• [U-Boot] [RFC][PATCH 4/8] Rearrange i386 Interupt Handling   Graeme Russ
• [U-Boot] [RFC][PATCH 5/8] Fix race condition when using SC520 timers   Graeme Russ
• [U-Boot] [RFC][PATCH 6/8] Reorder source objects in lib_i386 Makefile   Graeme Russ
• [U-Boot] [RFC][PATCH 7/8] Fix global label in inline asm compile error   Graeme Russ
• [U-Boot] [RFC][PATCH 8/8] Final i386 Relocation   Graeme Russ
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Graeme Russ
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Graeme Russ
• [U-Boot] [PATCH 0/3] [OneNAND] Flex-OneNAND driver support   Amul Kumar Saha
• [U-Boot] [PATCH 1/3] [OneNAND] Flex-OneNAND driver support   Amul Kumar Saha
• [U-Boot] [PATCH 2/3] [OneNAND] ENV Variable support for Flex-OneNAND   Amul Kumar Saha
• [U-Boot] [PATCH 3/3] [OneNAND] Flex-OneNAND boundary settings   Amul Kumar Saha
• [U-Boot] Interrupts in uboot with ARM AT91SAM9   Manuel Sahm
• [U-Boot] Interrupts in uboot with ARM AT91SAM9 (V2)   Manuel Sahm
• [U-Boot] Antw: Re: Interrupts in uboot with ARM AT91SAM9 (V2)   Manuel Sahm
• [U-Boot] Interrupts in uboot with ARM AT91SAM9 (V2)   Manuel Sahm
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Steve Sakoman
• [U-Boot] [PATCH] OMAP3: Update Overo and Beagle environment   Steve Sakoman
• [U-Boot] [PATCH] OMAP3: Update Overo and Beagle environment   Steve Sakoman
• [U-Boot] reloacting uboot   Ulf Samuelsson
• [U-Boot] [PATCH] ppc4xx: Fix PCIE PLL lock on 440SPe Yucca board   Rupjyoti Sarmah
• [U-Boot] [PATCH] AT91RM9200 BGA port D defines   Jens Scharsig
• [U-Boot] AT91RM9200 deprecated Ethernet driver   Jens Scharsig
• [U-Boot] [PATCH] Reset i2c slave devices during init on mpc5xxx cpus   Heiko Schocher
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Heiko Schocher
• [U-Boot] [PATCH][v1] mpc8260: move FDT memory node fixup into common CPU code.   Heiko Schocher
• [U-Boot] [PATCH v2] Reset i2c slave devices during init on mpc5xxx cpus   Heiko Schocher
• [U-Boot] [PATCH] fsl_i2c: increase I2C timeout values and make them configurable   Heiko Schocher
• [U-Boot] ARM Pull Request   Heiko Schocher
• [U-Boot] ARM Pull Request   Heiko Schocher
• [U-Boot] [PATCH][v1] mpc8260: move FDT memory node fixup into common CPU code.   Heiko Schocher
• [U-Boot] [PATCH][v1] muas3001: remove BRG clock node fixup to use common mpc8260 code.   Heiko Schocher
• [U-Boot] [PATCH][v1] mpc8260: remove Ethernet node fixup to use generic FDT code.   Heiko Schocher
• [U-Boot] [PATCH][v2] mpc8260: move FDT memory node fixup into common CPU code.   Heiko Schocher
• [U-Boot] [PATCH][v1] mpc8260: remove Ethernet node fixup to use generic FDT code.   Heiko Schocher
• [U-Boot] [PATCH 0/2] mpc52xx, mucmc52, uc101: config cleanup   Heiko Schocher
• [U-Boot] [PATCH 1/2] mpc52xx, mucmc52, uc101: config cleanup   Heiko Schocher
• [U-Boot] [PATCH 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
• [U-Boot] [PATCH 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
• [U-Boot] [PATCHv2 1/2] mpc52xx, mucmc52, uc101: config cleanup   Heiko Schocher
• [U-Boot] [PATCHv2 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
• [U-Boot] [PATCHv2 1/2] mpc52xx, mucmc52, uc101: config cleanup   Heiko Schocher
• [U-Boot] [PATCHv3 1/2] mpc5200, mucmc52, uc101: config cleanup   Heiko Schocher
• [U-Boot] [PATCHv3 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
• [U-Boot] [PATCHv2 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
• [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
• [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
• [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
• [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
• [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
• [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
• [U-Boot] [PATCHv5 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
• [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2819, rev 5 to calculate FDR/DFSR   Heiko Schocher
• [U-Boot] [PATCH][v3] FDT: remove obsolete OF_CPU and OF_SOC macros.   Heiko Schocher
• [U-Boot] [PATCH 1/2] ppc: Clean up calling of misc_init_r() during init   Heiko Schocher
• [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2819, rev 5 to calculate FDR/DFSR   Heiko Schocher
• [U-Boot] [PATCH 1/3] fsl_i2c: Wait for STOP condition to propagate   Heiko Schocher
• [U-Boot] [PATCH 2/3] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_{DFSR/FDR}   Heiko Schocher
• [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2919, rev 5 to calculate FDR/DFSR   Heiko Schocher
• [U-Boot] [PATCH v2] Remove deprecated 'autoscr' command/variables   Heiko Schocher
• [U-Boot] [PATCHv5 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
• [U-Boot] [PATCH 0/2] mpc52xx, mucmc52, uc101: config cleanup   Heiko Schocher
• [U-Boot] [PATCHv4 1/2] mpc5200, mucmc52, uc101: config cleanup   Heiko Schocher
• [U-Boot] [PATCHv6 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
• [U-Boot] [PATCH 1/3] fsl_i2c: Wait for STOP condition to propagate   Heiko Schocher
• [U-Boot] [PATCH 1/3] fsl_i2c: Wait for STOP condition to propagate   Heiko Schocher
• [U-Boot] [PATCH] mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields   Heiko Schocher
• [U-Boot] [PATCH 1/1] TI OMAP3 Use arm init sequence to initialize i2c   Heiko Schocher
• [U-Boot] Please pullu-boot-i2c.git   Heiko Schocher
• [U-Boot] [PATCH 1/1] TI OMAP3 Use arm init sequence to initialize i2c   Heiko Schocher
• [U-Boot] [PATCH] add Matrix Vision specific dir for common code.   André Schwarz
• [U-Boot] [PATCH] Add common code dir for Matrix Vision boards.   André Schwarz
• [U-Boot] [PATCH v2] Remove deprecated 'autoscr' command/variables   André Schwarz
• [U-Boot] network bootp/tftp hang with tsec on MPC8343   André Schwarz
• [U-Boot] gunzip fails sometimes on MPC8343   André Schwarz
• [U-Boot] API License Terms   Daniel Sherwood
• [U-Boot] API License Terms   Daniel Sherwood
• [U-Boot] Fwd: how to use uboot for lm3s811evb+qemu   Bai Shuwei
• [U-Boot] how to use uboot for lm3s811evb+qemu   Bai Shuwei
• [U-Boot] Xilinx LL temac update   Michal Simek
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Michal Simek
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Michal Simek
• [U-Boot] Microblaze repo update - patches   Michal Simek
• [U-Boot] Microblaze repo update - patches   Michal Simek
• [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Michal Simek
• [U-Boot] Microblaze Pull Request   Michal Simek
• [U-Boot] [PATCH] net: [V2] Add LL TEMAC driver to u-boot and move Emaclite to NET_MULTI   Michal Simek
• [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Haavard Skinnemoen
• [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Haavard Skinnemoen
• [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Haavard Skinnemoen
• [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Haavard Skinnemoen
• [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Haavard Skinnemoen
• [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Haavard Skinnemoen
• [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Haavard Skinnemoen
• [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Haavard Skinnemoen
• [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Haavard Skinnemoen
• [U-Boot] Virtual addresses, u-boot, and the MMU   Haavard Skinnemoen
• [U-Boot] Virtual addresses, u-boot, and the MMU   Haavard Skinnemoen
• [U-Boot] [PATCH] Rename CONFIG_SYS_MDDRC memory constants for all mpc512x boards   Martha M Stan
• [U-Boot] [PATCH] Add new Elpida memory configuration for mpc5121ads board   Martha M Stan
• [U-Boot] [PATCH] Rename CONFIG_SYS_MDDRC memory constants for all mpc512x boards   Martha M Stan
• [U-Boot] [PATCH] Streamlined mpc512x fixed_sdram init sequence allowing for   Martha M Stan
• [U-Boot] [PATCH] Add Elpida Memory Configuration to mpc5121ads Boards   Martha M Stan
• [U-Boot] [PATCH] Streamlined mpc512x fixed_sdram init sequence.   Martha M Stan
• [U-Boot] [PATCH] Add Elpida Memory Configuration to mpc5121ads Boards   Martha M Stan
• [U-Boot] [PATCH] Add mpc5125ads board and processor to the mpc512x family   Martha M Stan
• [U-Boot] [PATCH] Fixed ordering of MDDRC config registers to unbreak mpc5121ads patch   Martha M Stan
• [U-Boot] [PATCH] Fixed ordering of MDDRC config registers to unbreak mpc5121ads patch   Martha M Stan
• [U-Boot] [PATCH] Fixed ordering of MDDRC config registers to unbreak mpc5121ads patch   Martha M Stan
• [U-Boot] [PATCH] Stay with memory ordering of MDDRC config registers to unbreak mpc5121ads patch   Martha M Stan
• [U-Boot] Does u-boot support nand flash boot   Sun, Peng 2
• [U-Boot] I found an error   Sun, Peng 2
• [U-Boot] RAM burst mode problem   Frank Svendsbøe
• [U-Boot] Maintainer Yuli Barcohen   Frank Svendsbøe
• [U-Boot] RAM burst mode problem   Frank Svendsbøe
• [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Timur Tabi
• [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Timur Tabi
• [U-Boot] [PATCH v2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Timur Tabi
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Timur Tabi
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Timur Tabi
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Timur Tabi
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Timur Tabi
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Timur Tabi
• [U-Boot] [PATCH] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
• [U-Boot] [PATCH 2/2] fsl: add register read-back to set_law()   Timur Tabi
• [U-Boot] [PATCH 2/2] fsl: add register read-back to set_law()   Timur Tabi
• [U-Boot] [PATCH 2/2] fsl: add register read-back to set_law()   Timur Tabi
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
• [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Timur Tabi
• [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Timur Tabi
• [U-Boot] [PATCH 2/3] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_{DFSR/FDR}   Timur Tabi
• [U-Boot] divulgue sua empresa no portal www.tvgloboonline.com   Agencia Thopmidia
• [U-Boot] PowerPC -mrelocatable   Joakim Tjernlund
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
• [U-Boot] [PATCH 1/2] fsl_i2c: Wait for STOP condition to propagate   Joakim Tjernlund
• [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Joakim Tjernlund
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
• [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Joakim Tjernlund
• [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Joakim Tjernlund
• [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Joakim Tjernlund
• [U-Boot] [PATCH 1/3] fsl_i2c: Wait for STOP condition to propagate   Joakim Tjernlund
• [U-Boot] [PATCH 2/3] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_{DFSR/DFR}   Joakim Tjernlund
• [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2819, rev 5 to calculate FDR/DFSR   Joakim Tjernlund
• [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Joakim Tjernlund
• [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Joakim Tjernlund
• [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2819, rev 5 to calculate FDR/DFSR   Joakim Tjernlund
• [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Joakim Tjernlund
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Joakim Tjernlund
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Joakim Tjernlund
• [U-Boot] [PATCH 1/3] fsl_i2c: Wait for STOP condition to propagate   Joakim Tjernlund
• [U-Boot] [PATCH 2/3] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_{DFSR/FDR}   Joakim Tjernlund
• [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2919, rev 5 to calculate FDR/DFSR   Joakim Tjernlund
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Joakim Tjernlund
• [U-Boot] [PATCH 1/3] fsl_i2c: Wait for STOP condition to propagate   Joakim Tjernlund
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Joakim Tjernlund
• [U-Boot] [PATCH 2/3] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_{DFSR/FDR}   Joakim Tjernlund
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Joakim Tjernlund
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Joakim Tjernlund
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Joakim Tjernlund
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Joakim Tjernlund
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Joakim Tjernlund
• [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2919, rev 5 to calculate FDR/DFSR   Joakim Tjernlund
• [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2919, rev 5 to calculate FDR/DFSR   Joakim Tjernlund
• [U-Boot] [PATCH 00/13] ppc: Fix relocation   Joakim Tjernlund
• [U-Boot] MPC83xx and uec   Joakim Tjernlund
• [U-Boot] MPC83xx and uec   Joakim Tjernlund
• [U-Boot] [PATCH] fsl_i2c: Do not generate STOP after read.   Joakim Tjernlund
• [U-Boot] MPC83xx and uec   Joakim Tjernlund
• [U-Boot] MPC83xx and uec   Joakim Tjernlund
• [PATCH] relocation: Use C-functions to do relocate the GOT & fixups.   Joakim Tjernlund
• [U-Boot] [PATCH 1/3] fsl_i2c: Wait for STOP condition to propagate   Joakim Tjernlund
• [U-Boot] [PATCH 1/3] fsl_i2c: Wait for STOP condition to propagate   Joakim Tjernlund
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Joakim Tjernlund
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Joakim Tjernlund
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Joakim Tjernlund
• [PATCH] relocation: Use C as much as possible to do relocation.   Joakim Tjernlund
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Joakim Tjernlund
• [U-Boot] [PATCH 00/13] ppc: Fix relocation   Joakim Tjernlund
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Joakim Tjernlund
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Joakim Tjernlund
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Joakim Tjernlund
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Joakim Tjernlund
• [U-Boot] [PATCH] [RFC]mpc83xx: Remove need for -ffixed-r14   Joakim Tjernlund
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Joakim Tjernlund
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Joakim Tjernlund
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Joakim Tjernlund
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Joakim Tjernlund
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Joakim Tjernlund
• [U-Boot] USB device support for OMAP3   Tom
• [U-Boot] [PATCH 2/8] USB add macros for debugging usb device setup.   Tom
• [U-Boot] [PATCH 8/8] OMAP3 zoom2 Use usbtty if the debug board is not connected.   Tom
• [U-Boot] [PATCH 4/8] OMAP3 Add usb device support   Tom
• [U-Boot] [PATCH 3/8] TWL4030 Add usb PHY support   Tom
• [U-Boot] RFC: split ARM repo and distribute workload   Tom
• [U-Boot] RFC: split ARM repo and distribute workload   Tom
• [U-Boot] ARM Pull Request   Tom
• [U-Boot] ARM Pull Request   Tom
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Tom
• [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Tom
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Tom
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Tom
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Tom
• [U-Boot] [PATCH] OMAP3 Move cache routines to cache.S   Tom
• [U-Boot] RFC: split ARM repo and distribute workload   Tom
• [U-Boot] RFC: split ARM repo and distribute workload   Tom
• [U-Boot] [PATCH] TI: DaVinci: DM646x: Update flag used to represent DM646x SOC's   Tom
• [U-Boot] [U-boot] Marvell Pull Request   Tom
• [U-Boot] [PATCH v3] at91: Update MEESC board support   Tom
• [U-Boot] AT91 pending patches   Tom
• [U-Boot] [U-boot] Marvell Pull Request   Tom
• [U-Boot] how to apply at91 patch for the current u-boot-2009-06?   Tom
• [U-Boot] [PATCH 3/4 v3] s5pc1xx: support serial driver   Tom
• [U-Boot] [PATCH 1/4 v3] s5pc1xx: support Samsung s5pc1xx SoC   Tom
• [U-Boot] [PATCH 2/4 v3] s5pc1xx: support onenand driver   Tom
• [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Tom
• [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Tom
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Tom
• [U-Boot] ZOOM2 mux setup   Tom
• [U-Boot] [PATCH] OMAP3: Clean up whitespace in mux configs   Tom
• [U-Boot] [U-boot] Marvell Pull Request   Tom
• [U-Boot] [PATCH] vxworks: Make loading vxworks less verbose   Tom
• [U-Boot] [PATCH] vxworks: Make loading vxworks less verbose   Tom
• [U-Boot] [PATCH] vxworks: Add CONFIG_VXWORKS_PREBOOT   Tom
• [U-Boot] [PATCH 1/4 v3] s5pc1xx: support Samsung s5pc1xx SoC   Tom
• [U-Boot] [PATCH 3/4 v3] s5pc1xx: support serial driver   Tom
• [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Tom
• [U-Boot] [PATCH 3/4 v3] s5pc1xx: support serial driver   Tom
• [U-Boot] [PATCH] vxworks: Add CONFIG_VXWORKS_PREBOOT   Tom
• [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Tom
• [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Tom
• [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Tom
• [U-Boot] [U-boot] Marvell Pull Request   Tom
• [U-Boot] [PATCH 2/4 v3] s5pc1xx: support onenand driver   Tom
• [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Tom
• [U-Boot] [U-boot] Marvell Pull Request   Tom
• [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Tom
• [U-Boot] [PATCH v2] OMAP3 MMC: Fix warning dereferencing type-punned pointer   Tom
• [U-Boot] [PATCH] OMAP3: Update Overo and Beagle environment   Tom
• [U-Boot] [PATCH v2] OMAP3 MMC: Fix warning dereferencing type-punned pointer   Tom
• [U-Boot] smc911x runtime detection   Tom
• [U-Boot] [PATCH] OMAP3: Clean up whitespace in mux configs   Tom
• [U-Boot] [PATCH] OMAP3: Update Overo and Beagle environment   Tom
• [U-Boot] [PATCH] OMAP3: Clean up whitespace in mux configs   Tom
• [U-Boot] [PATCH] OMAP3: Update Overo and Beagle environment   Tom
• [U-Boot] [PATCH] OMAP3: Clean up whitespace in mux configs   Tom
• [U-Boot] [PATCH v3] OMAP3 MMC: Fix warning dereferencing type-punned pointer   Tom
• [U-Boot] AT91 pending patches   Tom
• [U-Boot] [U-boot] Marvell Pull Request   Tom
• [U-Boot] [PATCH] arm:kirkwood: Add hardware watchdog support for Marvell Kirkwood boards   Tom
• [U-Boot] [PATCH v4] at91: Update MEESC board support   Tom
• [U-Boot] [PATCH] arm:kirkwood: Add hardware watchdog support for Marvell Kirkwood boards   Tom
• [U-Boot] RFC USB composite devices   Tom
• [U-Boot] y meeee ?   Tom
• [U-Boot] [PATCH] TI: DaVinci DM355: Fix Compilation warning   Tom
• [U-Boot] [PATCH] TI: DaVinci: GPIO header file and definitions   Tom
• [U-Boot] [PATCH v2] TI: DaVinci DM365: Enabling network Support on DM365 EVM   Tom
• [U-Boot] [PATCH v4] at91: Update MEESC board support   Tom
• [U-Boot] [PATCH v5] at91: Update MEESC board support   Tom
• [U-Boot] [PATCH 1/1] TI OMAP3 Use arm init sequence to initialize i2c   Tom
• [U-Boot] RFC USB composite devices   Tom
• [U-Boot] [PATCH v2] TI: DaVinci: GPIO header file and definitions   Tom
• [U-Boot] [PATCH v3] TI: DaVinci DM365: Enabling network Support on DM365 EVM   Tom
• [U-Boot] V2 of OMAP3 USB device Support   Tom
• [U-Boot] Please Pull u-boot-ti/master   Tom
• [U-Boot] RFC USB composite devices   Tom
• [U-Boot] [PATCH] Nand: Implement raw read/write and biterr   Tom
• [U-Boot] [PATCH] TI: DaVinci: GPIO header file and definitions   Tom
• [U-Boot] [PATCH] TI: DaVinci: GPIO header file and definitions   Tom
• [U-Boot] [PATCH] AT91: Add SD/MMC controller support   Albin Tonnerre
• [U-Boot] [PATCH] at91sam9260/afeb9260: Fix SPI initialization   Albin Tonnerre
• [U-Boot] [PATCH] AT91: Add SD/MMC controller support   Albin Tonnerre
• [U-Boot] [PATCH 1/2] Move uninitialized_var() macro from ubi_uboot.h to compiler.h   Albin Tonnerre
• [U-Boot] Question AT91SAM9G20 boot from SD   Albin Tonnerre
• [U-Boot] Question AT91SAM9G20 boot from SD   Albin Tonnerre
• [U-Boot] [PATCH] MCI support for AT91 family processors.   Albin Tonnerre
• [U-Boot] [PATCH] AT91: Add support for blue_LED_* and add coloured_LED_init to at91/led.c   Albin Tonnerre
• [U-Boot] [PATCH v2] AT91: Add SD/MMC controller support   Albin Tonnerre
• [U-Boot] [PATCH v3] AT91: Add SD/MMC controller support   Albin Tonnerre
• [U-Boot] [PATCH v2] AT91: Add SD/MMC controller support & [PATCH v3]   Albin Tonnerre
• [U-Boot] [PATCH v3] AT91: Problems with SD   Albin Tonnerre
• [U-Boot] [PATCH] MCI support for AT91 family processors.   Albin Tonnerre
• [U-Boot] [PATCH v3] AT91: Problems with SD   Albin Tonnerre
• [U-Boot] [PATCH] Add support for the Calao QIL-A9G20 board   Albin Tonnerre
• [U-Boot] mpc5121 - EHCI problems with some (but not all) USB hubs   Michael Trimarchi
• [U-Boot] mpc5121 - EHCI problems with some (but not all) USB hubs   Michael Trimarchi
• [U-Boot] Adding new U-Boot Command.   Tuma
• [U-Boot] Adding new U-Boot Command.   Tuma
• [U-Boot] Adding new U-Boot Command.   Tuma
• [U-Boot] Adding new U-Boot Command.   Tuma
• [U-Boot] [PATCH 1/2 v2] 85xx: CONFIG_MP Boot Page Translation update   Peter Tyser
• [U-Boot] [PATCH] ppc/85xx: Fix bug in setup_mp code   Peter Tyser
• [U-Boot] [PATCH][v1] ep8248: add support for device tree and secondary Ethernet interface.   Peter Tyser
• [U-Boot] [PATCH][v1] mpc8260: move FDT memory node fixup into common CPU code.   Peter Tyser
• [U-Boot] [PATCH][v2] ep8248: add support for device tree and secondary Ethernet interface.   Peter Tyser
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Peter Tyser
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Peter Tyser
• [U-Boot] [PATCH] fsl_i2c: increase I2C timeout values and make them configurable   Peter Tyser
• [U-Boot] ARM Pull Request   Peter Tyser
• [U-Boot] ARM Pull Request   Peter Tyser
• [U-Boot] PowerPC -mrelocatable   Peter Tyser
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Peter Tyser
• [U-Boot] PowerPC -mrelocatable   Peter Tyser
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Peter Tyser
• [U-Boot] LCRR setting on XPEDITE5370 & XPEDITE5200   Peter Tyser
• [U-Boot] [PATCH] ppc/85xx: Fix LCRR_CLKDIV defines   Peter Tyser
• [U-Boot] [PATCH] ppc/85xx: Fix LCRR_CLKDIV defines   Peter Tyser
• [U-Boot] [STATUS] RFC: stretch merge window?   Peter Tyser
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Peter Tyser
• [U-Boot] [PATCH v2] Remove deprecated 'autoscr' command/variables   Peter Tyser
• [U-Boot] [PATCH 1/2] ppc: Clean up calling of misc_init_r() during init   Peter Tyser
• [U-Boot] [PATCH 2/2] ppc: Clean up calling of phy_reset() during init   Peter Tyser
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Peter Tyser
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Peter Tyser
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Peter Tyser
• [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Peter Tyser
• [U-Boot] [PATCH] MAKEALL: Add summary information   Peter Tyser
• [U-Boot] [PATCH v2] MAKEALL: Add summary information   Peter Tyser
• [U-Boot] [PATCH v3] MAKEALL: Add summary information   Peter Tyser
• [U-Boot] [PATCH 5/6] DLMALLOC:!X86: add av_ initialization   Peter Tyser
• [U-Boot] [PATCH 6/6] ARM:OMAP3:SDP3430: initial support   Peter Tyser
• [U-Boot] [PATCH v4] MAKEALL: Add summary information   Peter Tyser
• [U-Boot] [PATCH 5/6] DLMALLOC:!X86: add av_ initialization   Peter Tyser
• [U-Boot] [PATCH v3] MAKEALL: Add summary information   Peter Tyser
• [U-Boot] [PATCH v2] MAKEALL: Add summary information   Peter Tyser
• [U-Boot] [PATCH 00/13] ppc: Fix relocation   Peter Tyser
• [U-Boot] [PATCH 01/13] ppc: Enable full relocation to RAM   Peter Tyser
• [U-Boot] [PATCH 02/13] ppc: Check for compilers that don't support relocation   Peter Tyser
• [U-Boot] [PATCH 03/13] ppc: Remove board.c relocation fixups   Peter Tyser
• [U-Boot] [PATCH 04/13] ppc: Remove pci config table pointer relocation fixups   Peter Tyser
• [U-Boot] [PATCH 05/13] ppc: Remove extable relocation fixups   Peter Tyser
• [U-Boot] [PATCH 06/13] ppc: Remove board-specific command table relocation fixups   Peter Tyser
• [U-Boot] [PATCH 07/13] tsec: Remove PHY command relocation fixups   Peter Tyser
• [U-Boot] [PATCH 08/13] fpga: Remove relocation fixups   Peter Tyser
• [U-Boot] [PATCH 09/13] mpl: Remove memory test relocation fixups   Peter Tyser
• [U-Boot] [PATCH 10/13] lwmon, lwmon5: Remove sysmon POST relocation fixups   Peter Tyser
• [U-Boot] [PATCH 11/13] p3mx: Remove serial relocation fixups   Peter Tyser
• [U-Boot] [PATCH 12/13] Conditionally perform common relocation fixups   Peter Tyser
• [U-Boot] [PATCH 13/13] ppc: Remove reloc_off field from global_data structure   Peter Tyser
• [U-Boot] [PATCH 04/13] ppc: Remove pci config table pointer relocation fixups   Peter Tyser
• [U-Boot] [PATCH 1/2 v5] MAKEALL: Add summary information   Peter Tyser
• [U-Boot] [PATCH 2/2 v5] MAKEALL: Use POSIX math   Peter Tyser
• [U-Boot] [PATCH] mpc8610hpcd: Use common 86xx fdt fixup code   Peter Tyser
• [U-Boot] [PATCH 00/13] ppc: Fix relocation   Peter Tyser
• [U-Boot] [PATCH/RFC] arm/microblaze/nios/nios2/sh: Remove relocation fixups   Peter Tyser
• [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Peter Tyser
• [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Peter Tyser
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Peter Tyser
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Peter Tyser
• [U-Boot] [PATCH] ppc4xx: HCU5 board: add register dump   Peter Tyser
• [U-Boot] [PATCH 13/13] ppc: Remove reloc_off field from global_data structure   Peter Tyser
• [U-Boot] [PATCH 00/13] ppc: Fix relocation   Peter Tyser
• [U-Boot] [PATCH] ppc4xx: HCU5 board: add register dump   Peter Tyser
• [U-Boot] [PATCH] ppc4xx: Add command 440epx_r   Peter Tyser
• [U-Boot] [PATCH 00/13] ppc: Fix relocation   Peter Tyser
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Peter Tyser
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Peter Tyser
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Peter Tyser
• [U-Boot] [PATCH] relocation: Do not relocate NULL pointers.   Peter Tyser
• [U-Boot] [PATCH 1/2] Move uninitialized_var() macro from ubi_uboot.h to compiler.h   Anton Vorontsov
• [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Anton Vorontsov
• [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Anton Vorontsov
• [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Anton Vorontsov
• [U-Boot] [PATCH 1/2] Move uninitialized_var() macro from ubi_uboot.h to compiler.h   Anton Vorontsov
• [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warningп   Anton Vorontsov
• [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Anton Vorontsov
• [U-Boot] [PATCH 1/2] Move uninitialized_var() macro from ubi_uboot.h to compiler.h   Anton Vorontsov
• [U-Boot] [PATCH v2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Anton Vorontsov
• [U-Boot] mpc83xx/serdes: License cleanup: remove "All Rights Reserved" notice   Anton Vorontsov
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Anton Vorontsov
• [U-Boot] Please pull u-boot-mpc85xx   Anton Vorontsov
• [U-Boot] [PATCH 1/7] fdt_support: Add multi-serial support for stdout fixup   Anton Vorontsov
• [U-Boot] No NAND device found!!! Freescale MPC8544+SAMSUNG 1GB Nand Flash , please help!   Anton Vorontsov
• [U-Boot] [PATCH 1/5] net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs   Anton Vorontsov
• [U-Boot] [PATCH 2/5] net: uec: Fix uccf.h and uec.h headers to include headers they depend on   Anton Vorontsov
• [U-Boot] [PATCH 3/5] mpc83xx: mpc8360emds: Don't use LBC SDRAM when DDR is available   Anton Vorontsov
• [U-Boot] [PATCH 4/5] mpc83xx: mpc8360emds: Use RGMII mode, add workarounds for rev. 2.1 CPUs   Anton Vorontsov
• [U-Boot] [PATCH 5/5] mpc83xx: mpc8360emds: Add QE USB device tree fixups   Anton Vorontsov
• [U-Boot] [PATCH 4/5] mpc83xx: mpc8360emds: Use RGMII mode, add workarounds for rev. 2.1 CPUs   Anton Vorontsov
• [U-Boot] MPC83xx and uec   Anton Vorontsov
• [U-Boot] MPC83xx and uec   Anton Vorontsov
• [U-Boot] MPC875 USB support?   Anton Vorontsov
• [U-Boot] [PATCH 4/5] mpc83xx: mpc8360emds: Use RGMII mode, add workarounds for rev. 2.1 CPUs   Anton Vorontsov
• [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Prafulla Wadaskar
• [U-Boot] [PATCH v3] arm: Kirkwood: add SYSRSTn Duration Counter Support   Prafulla Wadaskar
• [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Prafulla Wadaskar
• [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Prafulla Wadaskar
• [U-Boot] U-boot environment on Sheevaplug   Prafulla Wadaskar
• [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Prafulla Wadaskar
• [U-Boot] RFC: split ARM repo and distribute workload   Prafulla Wadaskar
• [U-Boot] RFC: split ARM repo and distribute workload   Prafulla Wadaskar
• [U-Boot] [PATCH] ARM: compiler options cleanup - improve tool chain support   Prafulla Wadaskar
• [U-Boot] [PATCH 1/5] tools: mkimage: Include default/fit_image.o in the build dependency calculations   Prafulla Wadaskar
• [U-Boot] [PATCH 2/5][repost] tools: mkimage: Making genimg_print_size API global   Prafulla Wadaskar
• [U-Boot] [PATCH 3/5][repost] tools: mkimage: Making table_entry code global   Prafulla Wadaskar
• [U-Boot] [PATCH 4/5] Kirkwood: Sheevaplug: kwimage configuration   Prafulla Wadaskar
• [U-Boot] [PATCH v4 5/5] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Prafulla Wadaskar
• [U-Boot] [PATCH v4 5/5][repost] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Prafulla Wadaskar
• [U-Boot] U-boot environment on Sheevaplug   Prafulla Wadaskar
• [U-Boot] [PATCH] net: kirkwood_egiga.c: fixed build warning   Prafulla Wadaskar
• [U-Boot] [PATCH v2] net: kirkwood_egiga.c: fixed build warning   Prafulla Wadaskar
• [U-Boot] LZMA support   Prafulla Wadaskar
• [U-Boot] [PATCH v4 5/5][repost] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Prafulla Wadaskar
• [U-Boot] [PATCH v2] Support for the OpenRD base board   Prafulla Wadaskar
• [U-Boot] [PATCH v2] Support for the OpenRD base board   Prafulla Wadaskar
• [U-Boot] [PATCH v2] Support for the OpenRD base board   Prafulla Wadaskar
• [U-Boot] about 88E1145   Prafulla Wadaskar
• [U-Boot] U-Boot load and run via NAND flash - ARM926EJ-S   Prafulla Wadaskar
• [U-Boot] [PATCH v3] Support for the OpenRD base board   Prafulla Wadaskar
• [U-Boot] [PATCH] Kirkwood: rd6281a: Add kwbimage build support   Prafulla Wadaskar
• [U-Boot] [PATCH] net: phy: mv88e61xx.c : fixed build warning   Prafulla Wadaskar
• [U-Boot] [PATCH] Kirkwood: mv88f6281gtw_ge: Add kwbimage build support   Prafulla Wadaskar
• [U-Boot] RFC: split ARM repo and distribute workload   Prafulla Wadaskar
• [U-Boot] [PATCH v4] Support for the OpenRD base board   Prafulla Wadaskar
• [U-Boot] [U-boot] Marvell Pull Request   Prafulla Wadaskar
• [U-Boot] [PATCH v4] Support for the OpenRD base board   Prafulla Wadaskar
• [U-Boot] [PATCH] Kirkwood: mv88f6281gtw_ge: Add kwbimage build support   Prafulla Wadaskar
• [U-Boot] [PATCH] Kirkwood: rd6281a: Add kwbimage build support   Prafulla Wadaskar
• [U-Boot] [U-boot] Marvell Pull Request   Prafulla Wadaskar
• [U-Boot] [U-boot] Marvell Pull Request   Prafulla Wadaskar
• [U-Boot] [PATCH] net: phy: mv88e61xx.c : fixed build warning   Prafulla Wadaskar
• [U-Boot] [PATCH] imx51:Add support basic boot code of freescale imx51 bbg board   Prafulla Wadaskar
• [U-Boot] [PATCH] arm: Correct build with CONFIG_SYS_HUSH_PARSER set   Prafulla Wadaskar
• [U-Boot] [U-boot] Marvell Pull Request   Prafulla Wadaskar
• [U-Boot] [PATCH] arm:kirkwood: Add hardware watchdog support for Marvell Kirkwood boards   Prafulla Wadaskar
• [U-Boot] [PATCH] arm:kirkwood: Add hardware watchdog support for Marvell Kirkwood boards   Prafulla Wadaskar
• [U-Boot] Flash sanity checks   Prafulla Wadaskar
• [U-Boot] [PATCH 2/2] MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST   Matt Waddel
• [U-Boot] [PATCH] TI: DaVinci DM365: Enabling net support on DM365   Matt Waddel
• [U-Boot] boot linux data aboot for S3C2440A   Gaye Abdoulaye Walsimou
• [U-Boot] [PATCH-ARM 3/4] Clean-up of s3c24x0 drivers excluding nand driver   Gaye Abdoulaye Walsimou
• [U-Boot] ref: pxa lcd color problem...   Paul Wang
• [U-Boot] U-Boot v2009.08 & JFFS2 (NOR)   Tommy Wang
• [U-Boot] about 88E1145   Zhe Wang
• [U-Boot] Microblaze repo update - patches   Ben Warren
• [U-Boot] [PATCH][Net] Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API   Ben Warren
• [U-Boot] [PATCH] net: add random_port() prototype   Ben Warren
• [U-Boot] [PATCH] net: Fix problem with 405EZ ethernet interrupt   Ben Warren
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Ben Warren
• [U-Boot] Microblaze repo update - patches   Ben Warren
• [U-Boot] [PATCH] net: [V2] Add LL TEMAC driver to u-boot and move Emaclite to NET_MULTI   Ben Warren
• [U-Boot] [STATUS] RFC: stretch merge window?   Ben Warren
• [U-Boot] AMCC 405EX - EMAC0 + EMAC1 Problems   Ben Warren
• [U-Boot] [PATCH 2/7] ppc/p4080: Add support for CoreNet style platform LAWs   Ben Warren
• [U-Boot] MPC83xx and uec   Ben Warren
• [U-Boot] [PATCH 0/3 v2] New MIIPHYBB implementation with multi-bus support   Ben Warren
• [U-Boot] [PATCH] smc91111_eeprom: get working with net multi conversion   Ben Warren
• [U-Boot] tftp packet failure counter reset   Ben Warren
• [U-Boot] U-Boot praise   Ben Warren
• [U-Boot] [PATCH 4/5] mpc83xx: mpc8360emds: Use RGMII mode, add workarounds for rev. 2.1 CPUs   Ben Warren
• [U-Boot] smc911x runtime detection (was: TI: OMAP3: Overo Tobi ethernet support)   Ben Warren
• [U-Boot] smc911x runtime detection (was: TI: OMAP3: Overo Tobi ethernet support)   Ben Warren
• [U-Boot] [PATCH v3] TI: OMAP3: Overo Tobi ethernet support   Ben Warren
• [U-Boot] [PATCH v3] TI: DaVinci DM365: Enabling network Support on DM365 EVM   Ben Warren
• [U-Boot] net status   Ben Warren
• [U-Boot] [PATCH v4 4/4]: arm: Define test_and_set_bit and test_and_clear bit for ARM   Justin Waters
• [U-Boot] Merging u-boot-s3c24xx with u-boot-samsung   Harald Welte
• [U-Boot] [PATCH 2/2] MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST   Scott Wood
• [U-Boot] [PATCH 2/2] MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST   Scott Wood
• [U-Boot] [PATCH 2/2] MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST   Scott Wood
• [U-Boot] [PATCH] mxc_nand: Remove Freescale's "All Rights Reserved."   Scott Wood
• [U-Boot] "All rights reserved" in drivers/mtd/nand/nand_util.c   Scott Wood
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Scott Wood
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Scott Wood
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Scott Wood
• [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Scott Wood
• [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Scott Wood
• [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Scott Wood
• [U-Boot] How to burn new U-Boot over network   Scott Wood
• [U-Boot] Is there any full story about how to take advantage FDT function ?   Scott Wood
• [U-Boot] Is there any full story about how to take advantage FDT function ?   Scott Wood
• [U-Boot] [PATCH] ppc/85xx: Simplify the top makefile for P1_P2_RDB boards   Scott Wood
• [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Scott Wood
• [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Scott Wood
• [U-Boot] [PATCH] board/flagadm/flash.c: fix compile warning   Scott Wood
• [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Scott Wood
• [U-Boot] [PATCH] board/linkstation/ide.c: Fix compile warning   Scott Wood
• [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Scott Wood
• [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support   Scott Wood
• [U-Boot] [PATCH] board/flagadm/flash.c: fix compile warning   Scott Wood
• [U-Boot] "All rights reserved" in drivers/mtd/nand/nand_util.c   Scott Wood
• [U-Boot] [PATCH v2 2/5] NAND boot: change NAND loader's relocate SP to CONFIG param   Scott Wood
• [U-Boot] "All rights reserved" in drivers/mtd/nand/nand_util.c   Scott Wood
• [U-Boot] [PATCH-ARM 4/4] Clean-up of s3c24x0 nand driver   Scott Wood
• [U-Boot] Flashing images bigger than ram   Scott Wood
• [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Scott Wood
• [U-Boot] Hanging in kmalloc of nand_scan_tail() function   Scott Wood
• [U-Boot] [PATCH v2] MIPS: VCT: Remove read_spareram reference   Scott Wood
• [U-Boot] [PATCH] mpc512x. Micron nand flash needs a reset before a read command is issued   Scott Wood
• [U-Boot] [PATCH] [OneNAND IPL] OneNAND board init support   Scott Wood
• [U-Boot] [PATCH] [OneNAND] Board can override OneNAND IPL image   Scott Wood
• [U-Boot] [PATCH 1/7] ppc/p4080: Add p4080 platform immap definitions   Scott Wood
• [U-Boot] [PATCH 2/7] ppc/p4080: Add support for CoreNet style platform LAWs   Scott Wood
• [U-Boot] [PATCH 2/7] ppc/p4080: Add support for CoreNet style platform LAWs   Scott Wood
• [U-Boot] [PATCH 6/7] ppc/p4080: Handle timebase enabling and frequency reporting   Scott Wood
• [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Scott Wood
• [U-Boot] [PATCH] [OneNAND IPL] OneNAND board init support   Scott Wood
• [U-Boot] [PATCH] Add MII bus implementation for FCC ports (using bitbanging)   Scott Wood
• [U-Boot] [PATCH v1 1/3] Make mmc init come before env_relocate   Scott Wood
• [U-Boot] [PATCH-ARM 4/4] Clean-up of s3c24x0 nand driver   Scott Wood
• [U-Boot] [PATCH 2/4 v3] s5pc1xx: support onenand driver   Scott Wood
• [U-Boot] [PATCH] mpc512x. Micron nand flash needs a reset before a read command is issued.   Scott Wood
• [U-Boot] [PATCH v5 1/7] ppc/p4080: Add p4080 platform immap definitions   Scott Wood
• [U-Boot] [PATCH] [OneNAND IPL] Refactor OneNAND IPL code   Scott Wood
• [U-Boot] [PATCH 0/3] [OneNAND] Flex-OneNAND driver support   Scott Wood
• [U-Boot] [PATCH 1/3] [OneNAND] Flex-OneNAND driver support   Scott Wood
• [U-Boot] [PATCH] NAND: davinci: Fix warnings when 4-bit ECC not used   Scott Wood
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   J.C. Wren
• [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   J.C. Wren
• [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   J.C. Wren
• [U-Boot] Is there any full story about how to take advantage FDT function ?   Gao Ya'nan
• [U-Boot] lib_generic/zlib.c breaks when DEBUG are defined   Gao Ya'nan
• [U-Boot] lib_generic/zlib.c breaks when DEBUG are defined   Gao Ya'nan
• [U-Boot] Is there any full story about how to take advantage FDT function ?   Gao Ya'nan
• [U-Boot] Is there any full story about how to take advantage FDT function ?   Gao Ya'nan
• [U-Boot] Is there any full story about how to take advantage FDT function ?   Gao Ya'nan
• [U-Boot] [PATCH] imx51:Add support basic boot code of freescaleimx51 bbg board   Fan YeFeng-R01011
• [U-Boot] I am maintainer of Freescale i.MX   Fan YeFeng-R01011
• [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Roy Zang
• [U-Boot] RAM burst mode problem   Mikhail Zaturenskiy
• [U-Boot] RAM burst mode problem   Mikhail Zaturenskiy
• [U-Boot] Configuring BRGs and BRG input clock on an MPC875   Mikhail Zaturenskiy
• [U-Boot] Configuring BRGs and BRG input clock on an MPC875   Mikhail Zaturenskiy
• [U-Boot] Configuring BRGs and BRG input clock on an MPC875   Mikhail Zaturenskiy
• [U-Boot] MPC875 USB support?   Mikhail Zaturenskiy
• [U-Boot] MPC875 USB support?   Mikhail Zaturenskiy
• [U-Boot] MPC875 USB support?   Mikhail Zaturenskiy
• [U-Boot] [PATCH][v1] ep8248: add support for device tree and secondary Ethernet interface.   Marcel Ziswiler
• [U-Boot] [PATCH][v2] ep8248: add support for device tree and secondary Ethernet interface.   Marcel Ziswiler
• [U-Boot] [PATCH][v1] mpc8260: move FDT memory node fixup into common CPU code.   Marcel Ziswiler
• [U-Boot] [PATCH][v1] r7780mp: fix typo in Ethernet chip model number comment.   Marcel Ziswiler
• [U-Boot] [PATCH][v1] r7780mp: fix typo in Ethernet chip model number comment.   Marcel Ziswiler
• [U-Boot] [PATCH][v1] FDT: remove obsolete OF_CPU and OF_SOC macros.   Marcel Ziswiler
• [U-Boot] [PATCH][v1] muas3001: remove BRG clock node fixup to use common mpc8260 code.   Marcel Ziswiler
• [U-Boot] [PATCH][v1] mpc8260: remove Ethernet node fixup to use generic FDT code.   Marcel Ziswiler
• [U-Boot] [PATCH][v2] mpc8260: move FDT memory node fixup into common CPU code.   Marcel Ziswiler
• [U-Boot] [PATCH][v3] ep8248: add support for device tree and secondary Ethernet interface.   Marcel Ziswiler
• [U-Boot] [PATCH][v2] mpc8260: move FDT memory node fixup into common CPU code.   Marcel Ziswiler
• [U-Boot] [PATCH][v1] mpc8260: remove Ethernet node fixup to use generic FDT code.   Marcel Ziswiler
• [U-Boot] [PATCH][v1] r7780mp: fix typo in Ethernet chip model number comment.   Marcel Ziswiler
• [U-Boot] [PATCH][v1] FDT: remove obsolete OF_CPU and OF_SOC macros.   Marcel Ziswiler
• [U-Boot] [PATCH][v2] mpc8260: move FDT memory node fixup into common CPU code.   Marcel Ziswiler
• [U-Boot] [PATCH][v3] ep8248: add support for device tree and secondary Ethernet interface.   Marcel Ziswiler
• [U-Boot] [PATCH][v1] FDT: remove obsolete OF_CPU and OF_SOC macros.   Marcel Ziswiler
• [U-Boot] [PATCH][v1] FDT: remove obsolete OF_CPU and OF_SOC macros.   Marcel Ziswiler
• [U-Boot] [PATCH][v2] mpc8260: move FDT memory node fixup into common CPU code.   Marcel Ziswiler
• [U-Boot] [PATCH][v1] mpc8260: remove Ethernet node fixup to use generic FDT code.   Marcel Ziswiler
• [U-Boot] [PATCH][v2] r7780mp: fix typo in Ethernet chip model number comment.   Marcel Ziswiler
• [U-Boot] [PATCH][v2] muas3001: remove BRG clock node fixup to use common mpc8260 code.   Marcel Ziswiler
• [U-Boot] [PATCH][v2] mpc8260: remove Ethernet node fixup to use generic FDT code.   Marcel Ziswiler
• [U-Boot] [PATCH][v2] FDT: remove obsolete OF_CPU and OF_SOC macros.   Marcel Ziswiler
• [U-Boot] [PATCH][v3] mpc8260: move FDT memory node fixup into common CPU code.   Marcel Ziswiler
• [U-Boot] [PATCH][v4] ep8248: add support for device tree and secondary Ethernet interface.   Marcel Ziswiler
• [U-Boot] [PATCH][v3] mpc8260: remove Ethernet node fixup to use generic FDT code.   Marcel Ziswiler
• [U-Boot] Maintainer Yuli Barcohen   Marcel Ziswiler
• [U-Boot] [PATCH][v3] FDT: remove obsolete OF_CPU and OF_SOC macros.   Marcel Ziswiler
• [U-Boot] [PATCH][v4] FDT: remove obsolete OF_CPU and OF_SOC macros.   Marcel Ziswiler
• [U-Boot] [PATCH] amcc-common.h: Use filenames from environment variables for update procedure.   Detlev Zundel
• [U-Boot] [PATCH 1/2] mpc52xx, mucmc52, uc101: config cleanup   Detlev Zundel
• [U-Boot] [PATCHv2 1/2] mpc52xx, mucmc52, uc101: config cleanup   Detlev Zundel
• [U-Boot] [PATCHv2 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Detlev Zundel
• [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Detlev Zundel
• [U-Boot] [PATCHv3 1/2] mpc5200, mucmc52, uc101: config cleanup   Detlev Zundel
• [U-Boot] help command not working in u-boot   Detlev Zundel
• [U-Boot] error in fw_printenv   Detlev Zundel
• [U-Boot] [PATCH 1/2] rtc/ds1337.c: Allow to set TCR register   Detlev Zundel
• [U-Boot] [PATCH 2/2] digsy_mtc: Add TCR register value for RTC (DS1339)   Detlev Zundel
• [U-Boot] Warning Bad CRC   Detlev Zundel
• [U-Boot] [PATCH 00/13] ppc: Fix relocation   Detlev Zundel
• [U-Boot] Adding new U-Boot Command.   Detlev Zundel
• [U-Boot] Failed mail   postmaster at acn2.net
• [U-Boot] How to burn new U-Boot over network   alex889
• [U-Boot] How to burn new U-Boot over network   alex889
• [U-Boot] Add Netconsole on DM365 board   alex889
• [U-Boot] configure ppc440spe as pci adapter   dbrazeau
• [U-Boot] configure ppc440spe as pci adapter   dbrazeau
• [U-Boot] No NAND device found!!! Freescale MPC8544+SAMSUNG 1GB Nand Flash , please help!   duckycool
• [U-Boot] No NAND device found!!! Freescale MPC8544+SAMSUNG 1GB Nand Flash , please help!   duckycool
• [U-Boot] No NAND device found!!! Freescale MPC8544+SAMSUNG 1GB Nand Flash , please help!   duckycool
• [U-Boot] No NAND device found!!! Freescale MPC8544+SAMSUNG 1GB Nand Flash , please help!   duckycool
• [U-Boot] mips board with no output from console   myuboot at fastmail.fm
• [U-Boot] boot linux data aboot for S3C2440A   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] s3c24x0 code changes   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM 1/4] Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM 2/4] Clean-up of s3c24x0 header files   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM 3/4] Clean-up of s3c24x0 drivers excluding nand driver   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM 4/4] Clean-up of s3c24x0 nand driver   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] lowlevel_init.s for ARM920t/S3C2410   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] nand_scan() in ARM9 S3C2410   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM 1/4, v2] Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM 3/4, v2] Clean-up of s3c24x0 drivers excluding nand driver   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM 4/4, v2] Clean-up of s3c24x0 nand driver]   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] boot linux data aboot for S3C2440A   fluke56512
• [U-Boot] boot linux data aboot for S3C2440A   fluke56512
• [U-Boot] [PATCH] imx51:Add support basic boot code of freescale imx51 bbg board   gareatech at gmail.com
• [U-Boot] [PATCH v6 1/2 resend] arm: A320: driver for FTRTC010 real time clock   ratbert.chuang at gmail.com
• [U-Boot] [PATCH v6 2/2 resend] arm: A320: Add support for Faraday A320 evaluation board   ratbert.chuang at gmail.com
• [U-Boot] [PATCH] Streamlined mpc512x fixed_sdram init sequence.   m marx
• [U-Boot] Broken board: mpc5121ads   m marx
• [U-Boot] [PATCH] Fixed ordering of MDDRC config registers to unbreak mpc5121ads patch   m marx
• [U-Boot] I found an error   sun peng
• [U-Boot] [PATCH] This modification will make the binay of smdk6400 nand spl in correct size   sun peng
• [U-Boot] UNITED NATION SCAM VICTIMS COMPENSATION   james phillip
• [U-Boot] LZMA support   khteh at smartbridges.com
• [U-Boot] LZMA support   khteh at smartbridges.com
• [U-Boot] how to enable various command support in u-boot-1.3.4?   sunr2007
• [U-Boot] how to enable various command support in u-boot-1.3.4?   sunr2007
• [U-Boot] how to enable various command support in u-boot-1.3.4?   sunr2007
• [U-Boot] how to enable various command support in u-boot-1.3.4?   sunr2007
• [U-Boot] how to enable various command support in u-boot-1.3.4?   sunr2007
• [U-Boot] how to apply at91 patch for the current u-boot-2009-06?   sunr2007
• [U-Boot] USB 3.0 support in u-boot?   sunr2007
• [U-Boot] [PATCH] TI DaVinci: DM355: Config Cleanup   s-paulraj at ti.com
• [U-Boot] [PATCH] TI DaVinci: DM365: Minor Updates to DM365 EVM   s-paulraj at ti.com
• [U-Boot] [PATCH] TI DaVinci: DM646x: Initial Support for DM646x SOC   s-paulraj at ti.com
• [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   s-paulraj at ti.com
• [U-Boot] [PATCH v2] TI DaVinci: Remove references to SZ_xx   s-paulraj at ti.com
• [U-Boot] [PATCH v2] TI DaVinci: DM355: Config Cleanup and Update   s-paulraj at ti.com
• [U-Boot] [PATCH] TI: OMAP3: Remove SZ_xx references   s-paulraj at ti.com
• [U-Boot] [PATCH v2] TI: OMAP3: Remove SZ_xx references   s-paulraj at ti.com
• [U-Boot] [PATCH] TI DaVinci: DM6446: Fix Compilation error in NAND mode   s-paulraj at ti.com
• [U-Boot] [PATCH] TI: DaVinci: DM355 Leopard board support   s-paulraj at ti.com
• [U-Boot] [PATCH] TI: DaVinci: Adding GIO addresses to header file   s-paulraj at ti.com
• [U-Boot] [PATCH] TI: DaVinci DM365: Minor config cleanup   s-paulraj at ti.com
• [U-Boot] [PATCH] TI DaVinci DM365: Removing header file which does not exist   s-paulraj at ti.com
• [U-Boot] [PATCH] TI: DaVinci DM365: Enabling net support on DM365   s-paulraj at ti.com
• [U-Boot] [PATCH] TI: DaVinci: DM646x: Update flag used to represent DM646x SOC's   s-paulraj at ti.com
• [U-Boot] [PATCH] TI: DaVinci DM355: Fix Compilation warning   s-paulraj at ti.com
• [U-Boot] [PATCH] TI: DaVinci: GPIO header file and definitions   s-paulraj at ti.com
• [U-Boot] [PATCH v2] TI: DaVinci DM365: Enabling network Support on DM365 EVM   s-paulraj at ti.com
• [U-Boot] [PATCH v2] TI: DaVinci: GPIO header file and definitions   s-paulraj at ti.com
• [U-Boot] [PATCH v3] TI: DaVinci DM365: Enabling network Support on DM365 EVM   s-paulraj at ti.com
• [U-Boot] Please Pull u-boot-ti/master   s-paulraj at ti.com
• [U-Boot] Enabling D cache on Arm Cortex A8 in U-boot   akshay ts
• [U-Boot] Why Cache flush required in some ARM Cortex boards to enable D cache?   akshay ts
• [U-Boot] Why Cache flush required in some ARM Cortex boards to enable D cache?   akshay ts
• [U-Boot] Uboot Standalone Applications- Test_burst   vneethv
• [U-Boot] V2 of OMAP3 USB device Support   y at windriver.com
• [U-Boot] [PATCH 1/8] USB Consolidate descriptor definitions   y at windriver.com
• [U-Boot] [PATCH 2/8] USB add macros for debugging usb device setup.   y at windriver.com
• [U-Boot] [PATCH 3/8] TWL4030 Add usb PHY support   y at windriver.com
• [U-Boot] [PATCH 4/8] OMAP3 Add usb device support   y at windriver.com
• [U-Boot] [PATCH 5/8] OMAP3 zoom1 Add usbtty configuration   y at windriver.com
• [U-Boot] [PATCH 6/8] OMAP3 beagle Add usbtty configuration   y at windriver.com
• [U-Boot] [PATCH 7/8] USBTTY make some function declarations easier to use.   y at windriver.com
• [U-Boot] [PATCH 8/8] OMAP3 zoom2 Use usbtty if the debug board is not connected.   y at windriver.com
• [U-Boot] [PATCH][v1] ep8248: add support for device tree and secondary Ethernet interface.   Marcel ziswiler
• [U-Boot] [PATCH][v1] mpc8260: move FDT memory node fixup into common CPU code.   Marcel ziswiler
• [U-Boot] [PATCH][v2] ep8248: add support for device tree and secondary Ethernet interface.   Marcel ziswiler
• [U-Boot] [PATCH] SPARC standalone app fix   Сергей Миронов
• [U-Boot] Compile for SPARC Leon3 fails with *** No rule to make target ... ***   Сергей Миронов
• [U-Boot] [PATCH] SPARC standalone app fix   Сергей Миронов
• [U-Boot] u-boot-1.3.4 porting problem   王培养
• [U-Boot] Does u-boot support nand flash boot   雷 高
• [U-Boot] An error in u-boot-2009.08/cpu/arm920t/start.S   雷 高