[U-Boot] [PATCH] Enable usb ehci support for p2020ds board

Tue Sep 15 09:24:59 CEST 2009

 

> -----Original Message-----
> From: Wolfgang Denk [mailto:wd at denx.de] 
> Sent: Tuesday, September 15, 2009 2:55 AM
> To: Zang Roy-R61911
> Cc: Felix Radensky; U-Boot-Denx; Zhang Junjie-B18070; Kumar Gala
> Subject: Re: [U-Boot] [PATCH] Enable usb ehci support for 
> p2020ds board
> 
> Dear "Zang Roy-R61911",
> 
> In message 
> <7DF0AF56456B8F4081E3C44CCCE311DE5A36F2 at zch01exm23.fsl.freesca
> le.net> you wrote:
> >  
> ...
> > You need to run
> > => usb start
> > to start usb, then run
> > => usb dev 0
> > to specify the device, then run
> 
> This should not be needed...
> 
> > => ext2ls usb 0:1
> > to ls the sda1 content. make sure it is ext2.
> 
> ... as this command explicitly sets the device.
You are correct.
Thanks.
Roy