[U-Boot] Please pull u-boot-mpc85xx (updated)
Paul Gortmaker
paul.gortmaker at windriver.com
Fri Sep 25 00:32:11 CEST 2009
On Thu, Sep 24, 2009 at 5:40 PM, Wolfgang Denk <wd at denx.de> wrote:
> Dear Kumar Gala,
>
> In message <Pine.LNX.4.64.0909241206140.30130 at localhost.localdomain> you wrote:
>> This includes Paul's updates for sbc85xx and p4080 updates. I have not
>> fixed the immap line issue, but will do that as a follow on patch.
>>
>> - k
[...]
>>
>> Paul Gortmaker (13):
>> sbc8548: replace README with completely new document
>> sbc8548: enable use of PCI network cards
>> sbc8548: delete unused MPC8548CDS info carried over from port
>> sbc8548: get_clock_freq is not valid for this board
>> sbc8548: cosmetic line re-wrap
>> sbc8548: enable access to second bank of flash
>> sbc8548: remove eTSEC3/4 voltage hack
>> sbc8548: use I/O accessors
>> sbc8548: correct local bus SDRAM size from 64M to 128M
>
> Ummm... I rejected this patch!!
I believe that if you check, you will find that the patch that
you have got from this pull request from Kumar has the long
line issue that you wanted fixed already in it. If there is
something else that I should have fixed, but missed then
let me know.
Thanks,
Paul.
>
>> fsl_pci: create a SET_STD_PCI_INFO() helper wrapper
>> sbc8548: update PCI/PCI-e support code
>> sbc8548: allow enabling PCI via a make config option
>> sbc85x0: tidy up Makefile to use new configuration script.
>>
>> Peter Tyser (1):
>> mpc8610hpcd: Use common 86xx fdt fixup code
>>
>> Poonam Aggrwal (1):
>> ppc/85xx: 32bit DDR changes for P1020/P1011
>>
>> Vivek Mahajan (1):
>> 85xx-fdt: Fixed l2-ctlr's compatible prop for QorIQ
>>
>> MAKEALL | 4 +
>> Makefile | 66 ++-----
>> board/atum8548/law.c | 2 +-
>> board/freescale/mpc8536ds/law.c | 6 +-
>> board/freescale/mpc8540ads/law.c | 2 +-
>> board/freescale/mpc8544ds/law.c | 6 +-
>> board/freescale/mpc8560ads/law.c | 2 +-
>> board/freescale/mpc8572ds/law.c | 6 +-
>> board/freescale/mpc8572ds/mpc8572ds.c | 230 +++++++---------------
>> board/freescale/mpc8610hpcd/mpc8610hpcd.c | 14 +--
>> board/freescale/p1_p2_rdb/ddr.c | 29 +++-
>> board/freescale/p1_p2_rdb/law.c | 4 +-
>> board/freescale/p1_p2_rdb/pci.c | 42 ++--
>> board/freescale/p2020ds/law.c | 6 +-
>> board/freescale/p2020ds/p2020ds.c | 150 +++-----------
>> board/pm854/law.c | 2 +-
>> board/pm856/law.c | 2 +-
>> board/sbc8548/Makefile | 4 +-
>> board/sbc8548/law.c | 12 +-
>> board/sbc8548/sbc8548.c | 305 ++++++++++-------------------
>> board/sbc8548/tlb.c | 80 +++++---
>> board/socrates/law.c | 4 +-
>> board/stx/stxgp3/law.c | 2 +-
>> board/stx/stxssa/law.c | 2 +-
>> board/xes/xpedite5200/law.c | 2 +-
>> cpu/mpc85xx/Makefile | 1 +
>> cpu/mpc85xx/cpu.c | 49 +++++-
>> cpu/mpc85xx/cpu_init.c | 21 ++-
>> cpu/mpc85xx/cpu_init_early.c | 72 +++++--
>> cpu/mpc85xx/cpu_init_nand.c | 63 ++++++
>> cpu/mpc85xx/fdt.c | 15 +-
>> cpu/mpc85xx/mp.c | 68 ++++++-
>> cpu/mpc85xx/release.S | 3 +-
>> cpu/mpc85xx/speed.c | 86 ++++++++
>> cpu/mpc85xx/u-boot-nand_spl.lds | 67 +++++++
>> cpu/mpc8xxx/cpu.c | 4 +
>> doc/README.sbc8548 | 189 ++++++++++++++++--
>> drivers/misc/fsl_law.c | 128 +++++++++++-
>> drivers/pci/fsl_pci_init.c | 2 +-
>> include/asm-ppc/config.h | 6 +-
>> include/asm-ppc/fsl_law.h | 31 +++
>> include/asm-ppc/fsl_lbc.h | 12 ++
>> include/asm-ppc/fsl_pci.h | 12 ++
>> include/asm-ppc/immap_85xx.h | 289 +++++++++++++++++++++++++--
>> include/asm-ppc/mmu.h | 9 +-
>> include/asm-ppc/processor.h | 4 +
>> include/configs/MPC8536DS.h | 2 +-
>> include/configs/MPC8572DS.h | 4 +
>> include/configs/P1_P2_RDB.h | 13 ++
>> include/configs/P2020DS.h | 4 +
>> include/configs/SBC8540.h | 19 +-
>> include/configs/XPEDITE5170.h | 2 +-
>> include/configs/XPEDITE5200.h | 2 +-
>> include/configs/XPEDITE5370.h | 2 +-
>> include/configs/sbc8548.h | 147 ++++++++++-----
>> include/configs/sbc8560.h | 17 ++-
>> include/e500.h | 6 +
>> 57 files changed, 1559 insertions(+), 774 deletions(-)
>> create mode 100644 cpu/mpc85xx/cpu_init_nand.c
>> create mode 100644 cpu/mpc85xx/u-boot-nand_spl.lds
>>
>
> Applied, but please be careful not to apply rejected patches (the one
> above needs to be cleaned up). [And please re-check if there were
> other rejected patches in your list.]
>
> Best regards,
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> Computers are not intelligent. They only think they are.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
More information about the U-Boot
mailing list