[U-Boot] Please pull u-boot-mpc85xx (updated)
Wolfgang Denk
wd at denx.de
Thu Sep 24 23:40:09 CEST 2009
Dear Kumar Gala,
In message <Pine.LNX.4.64.0909241206140.30130 at localhost.localdomain> you wrote:
> This includes Paul's updates for sbc85xx and p4080 updates. I have not
> fixed the immap line issue, but will do that as a follow on patch.
>
> - k
>
> The following changes since commit 30d7aae7e82dacf9ae2983fbbf3567515266968b:
> Wolfgang Denk (1):
> Merge branch 'master' of /home/wd/git/u-boot/custodians
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc85xx.git master
>
> Kumar Gala (16):
> ppc/85xx: Fix LCRR_CLKDIV defines
> ppc/85xx: Simplify the top makefile for 36-bit config for MPC8572DS
> ppc/85xx: Simplify the top makefile for 36-bit config for P2020DS
> ppc/85xx: Simplify the top makefile for P1_P2_RDB boards
> ppc/85xx: Clean up p1_p2_rdb PCI setup
> ppc/85xx: Clean up p2020ds PCI setup code
> ppc/85xx: Clean up mpc8572DS PCI setup code
> ppc/85xx: Clean up use of LAWAR defines
> ppc/85xx: Fix enabling of L2 cache
> ppc/p4080: Add p4080 platform immap definitions
> ppc/p4080: Add support for CoreNet style platform LAWs
> ppc/p4080: CoreNet platfrom style CCSRBAR setting
> ppc/p4080: CoreNet platfrom style secondary core release
> ppc/p4080: Add various p4080 related defines (and p4040)
> ppc/p4080: Handle timebase enabling and frequency reporting
> ppc/p4080: Determine various chip frequencies on CoreNet platforms
>
> Mingkai Hu (4):
> ppc/85xx: simplify the top makefile for 36-bit config for mpc8536ds
> ppc/85xx: add ld script file for boot from NAND
> immap_85xx: add porpllsr's plat ratio definition
> ppc/85xx: add cpu init config file for boot from NAND
>
> Paul Gortmaker (13):
> sbc8548: replace README with completely new document
> sbc8548: enable use of PCI network cards
> sbc8548: delete unused MPC8548CDS info carried over from port
> sbc8548: get_clock_freq is not valid for this board
> sbc8548: cosmetic line re-wrap
> sbc8548: enable access to second bank of flash
> sbc8548: remove eTSEC3/4 voltage hack
> sbc8548: use I/O accessors
> sbc8548: correct local bus SDRAM size from 64M to 128M
Ummm... I rejected this patch!!
> fsl_pci: create a SET_STD_PCI_INFO() helper wrapper
> sbc8548: update PCI/PCI-e support code
> sbc8548: allow enabling PCI via a make config option
> sbc85x0: tidy up Makefile to use new configuration script.
>
> Peter Tyser (1):
> mpc8610hpcd: Use common 86xx fdt fixup code
>
> Poonam Aggrwal (1):
> ppc/85xx: 32bit DDR changes for P1020/P1011
>
> Vivek Mahajan (1):
> 85xx-fdt: Fixed l2-ctlr's compatible prop for QorIQ
>
> MAKEALL | 4 +
> Makefile | 66 ++-----
> board/atum8548/law.c | 2 +-
> board/freescale/mpc8536ds/law.c | 6 +-
> board/freescale/mpc8540ads/law.c | 2 +-
> board/freescale/mpc8544ds/law.c | 6 +-
> board/freescale/mpc8560ads/law.c | 2 +-
> board/freescale/mpc8572ds/law.c | 6 +-
> board/freescale/mpc8572ds/mpc8572ds.c | 230 +++++++---------------
> board/freescale/mpc8610hpcd/mpc8610hpcd.c | 14 +--
> board/freescale/p1_p2_rdb/ddr.c | 29 +++-
> board/freescale/p1_p2_rdb/law.c | 4 +-
> board/freescale/p1_p2_rdb/pci.c | 42 ++--
> board/freescale/p2020ds/law.c | 6 +-
> board/freescale/p2020ds/p2020ds.c | 150 +++-----------
> board/pm854/law.c | 2 +-
> board/pm856/law.c | 2 +-
> board/sbc8548/Makefile | 4 +-
> board/sbc8548/law.c | 12 +-
> board/sbc8548/sbc8548.c | 305 ++++++++++-------------------
> board/sbc8548/tlb.c | 80 +++++---
> board/socrates/law.c | 4 +-
> board/stx/stxgp3/law.c | 2 +-
> board/stx/stxssa/law.c | 2 +-
> board/xes/xpedite5200/law.c | 2 +-
> cpu/mpc85xx/Makefile | 1 +
> cpu/mpc85xx/cpu.c | 49 +++++-
> cpu/mpc85xx/cpu_init.c | 21 ++-
> cpu/mpc85xx/cpu_init_early.c | 72 +++++--
> cpu/mpc85xx/cpu_init_nand.c | 63 ++++++
> cpu/mpc85xx/fdt.c | 15 +-
> cpu/mpc85xx/mp.c | 68 ++++++-
> cpu/mpc85xx/release.S | 3 +-
> cpu/mpc85xx/speed.c | 86 ++++++++
> cpu/mpc85xx/u-boot-nand_spl.lds | 67 +++++++
> cpu/mpc8xxx/cpu.c | 4 +
> doc/README.sbc8548 | 189 ++++++++++++++++--
> drivers/misc/fsl_law.c | 128 +++++++++++-
> drivers/pci/fsl_pci_init.c | 2 +-
> include/asm-ppc/config.h | 6 +-
> include/asm-ppc/fsl_law.h | 31 +++
> include/asm-ppc/fsl_lbc.h | 12 ++
> include/asm-ppc/fsl_pci.h | 12 ++
> include/asm-ppc/immap_85xx.h | 289 +++++++++++++++++++++++++--
> include/asm-ppc/mmu.h | 9 +-
> include/asm-ppc/processor.h | 4 +
> include/configs/MPC8536DS.h | 2 +-
> include/configs/MPC8572DS.h | 4 +
> include/configs/P1_P2_RDB.h | 13 ++
> include/configs/P2020DS.h | 4 +
> include/configs/SBC8540.h | 19 +-
> include/configs/XPEDITE5170.h | 2 +-
> include/configs/XPEDITE5200.h | 2 +-
> include/configs/XPEDITE5370.h | 2 +-
> include/configs/sbc8548.h | 147 ++++++++++-----
> include/configs/sbc8560.h | 17 ++-
> include/e500.h | 6 +
> 57 files changed, 1559 insertions(+), 774 deletions(-)
> create mode 100644 cpu/mpc85xx/cpu_init_nand.c
> create mode 100644 cpu/mpc85xx/u-boot-nand_spl.lds
>
Applied, but please be careful not to apply rejected patches (the one
above needs to be cleaned up). [And please re-check if there were
other rejected patches in your list.]
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Computers are not intelligent. They only think they are.
More information about the U-Boot
mailing list