[U-Boot] [PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards

Jean-Christophe PLAGNIOL-VILLARD plagnioj at jcrosoft.com
Sat Sep 5 19:43:55 CEST 2009


On 16:33 Sat 05 Sep     , kevin.morfitt at fearnside-systems.co.uk wrote:
> This sets CONFIG_SYS_HZ to 1000 for all boards that use the s3c2400 and
> s3c2410 cpu's which fixes various problems such as the timeouts in tftp being
> too short.
> 
> Tested on an Embest SBC2440-II Board with local u-boot patches as I don't
> have any s3c2400 or s3c2410 boards but need this patch applying before I can
> submit patches for the SBC2440-II Board. Also, ran MAKEALL for all ARM9 targets
> and no new warnings or errors were found.
> 
> It was originally submitted on 21/06/2009 but didn't get into the 2009.08
> release, and Jean-Pierre made one comment on the original patch (see
> http://lists.denx.de/pipermail/u-boot/2009-July/055470.html). I've made two
> changes to the original patch:
> - it's been re-based to the current release
> - I've re-named get_timer_raw() to get_ticks() in response to Jean-Pierre's comment
> 
> This affects the sbc2410, smdk2400, smdk2410 and trab boards. I've copied it
> directly to the maintainers of all except the sbc2410 which doesn't have an
> entry in MAINTAINERS.
> 
> Signed-off-by: Kevin Morfitt <kmorfitt at aselaptop-1.localdomain>
> ---
>  cpu/arm920t/s3c24x0/timer.c |   36 ++++++++++++++++++++----------------
>  include/configs/sbc2410x.h  |    4 +---
>  include/configs/smdk2400.h  |    4 +---
>  include/configs/smdk2410.h  |    4 +---
>  include/configs/trab.h      |   12 +-----------
>  5 files changed, 24 insertions(+), 36 deletions(-)
Need to be test on trab or other but looks fine

Best Regards,
J.


More information about the U-Boot mailing list