[U-Boot] [PATCH] Kirkwood: mv88f6281gtw_ge: Add kwbimage build support

[Prafulla Wadaskar]

> -----Original Message-----
> From: Prafulla Wadaskar [mailto:prafulla at marvell.com] 
> Sent: Monday, September 21, 2009 8:28 PM
> To: u-boot at lists.denx.de
> Cc: Prabhanjan Sarnaik; Ashish Karkare; Prafulla Wadaskar
> Subject: [PATCH] Kirkwood: mv88f6281gtw_ge: Add kwbimage build support
> 
> This patch adds kwbimage configuration file
> (used by mkimage utility)
> to support u-boot.kwb target on mv88f6281gtw_ge board.
> 
> To create Kirkwood boot image to be flashed on SPI Flash,
> additional parameter u-boot.kwb need to be passed during make.
> 
> Signed-off-by: Prafulla Wadaskar <prafulla at marvell.com>
> ---
>  board/Marvell/mv88f6281gtw_ge/config.mk    |    3 +
>  board/Marvell/mv88f6281gtw_ge/kwbimage.cfg |  165 
> ++++++++++++++++++++++++++++
>  2 files changed, 168 insertions(+), 0 deletions(-)
>  create mode 100644 board/Marvell/mv88f6281gtw_ge/kwbimage.cfg

Applied to u-boot-marvell master branch

Regards..
Prafulla . .