[U-Boot] [PATCH][v3] mpc8260: remove Ethernet node fixup to use generic FDT code.

[Marcel Ziswiler]

Remove Ethernet node fixup from mgcoge and muas3001 boards and modify its
configs for the common mpc8260 code to use generic Ethernet fixup.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler at noser.com>
Tested-by: Heiko Schocher <hs at denx.de>
---
Changes since v1:
- Added Heiko's tested-by
Changes since v2:
- Re-based to origin/master

 board/keymile/mgcoge/mgcoge.c |    5 -----
 board/muas3001/muas3001.c     |   15 ---------------
 include/configs/mgcoge.h      |    1 +
 include/configs/muas3001.h    |    1 +
 4 files changed, 2 insertions(+), 20 deletions(-)

diff --git a/board/keymile/mgcoge/mgcoge.c b/board/keymile/mgcoge/mgcoge.c
index d24a4b5..b16a01c 100644
--- a/board/keymile/mgcoge/mgcoge.c
+++ b/board/keymile/mgcoge/mgcoge.c
@@ -25,7 +25,6 @@
 #include <mpc8260.h>
 #include <ioports.h>
 #include <malloc.h>
-#include <net.h>
 #include <asm/io.h>
 
 #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
@@ -373,10 +372,6 @@ void ft_blob_update (void *blob, bd_t *bd)
 	flash_reg[5] = cpu_to_be32 (info->size);
 	fdt_set_node_and_value (blob, "/localbus/flash at 5,0", "reg", flash_reg,
 				sizeof (flash_reg));
-
-	/* MAC addr */
-	fdt_set_node_and_value (blob, "/soc/cpm/ethernet", "mac-address",
-				bd->bi_enetaddr, sizeof (u8) * 6);
 }
 
 void ft_board_setup (void *blob, bd_t *bd)
diff --git a/board/muas3001/muas3001.c b/board/muas3001/muas3001.c
index bf4ccb6..36caed8 100644
--- a/board/muas3001/muas3001.c
+++ b/board/muas3001/muas3001.c
@@ -342,21 +342,6 @@ void ft_blob_update (void *blob, bd_t *bd)
 		printf ("ft_blob_update(): cannot find /localbus node "
 			"err:%s\n", fdt_strerror (nodeoffset));
 	}
-	/* MAC Adresse */
-	nodeoffset = fdt_path_offset (blob, "/soc/cpm/ethernet");
-	if (nodeoffset >= 0) {
-		uchar ethaddr[6];
-		eth_getenv_enetaddr("ethaddr", ethaddr);
-		ret = fdt_setprop (blob, nodeoffset, "mac-address", ethaddr,
-					sizeof (uchar) * 6);
-	if (ret < 0)
-		printf ("ft_blob_update): cannot set /soc/cpm/ethernet/mac-address "
-			"property err:%s\n", fdt_strerror (ret));
-	} else {
-		/* memory node is required in dts */
-		printf ("ft_blob_update(): cannot find /soc/cpm/ethernet node "
-			"err:%s\n", fdt_strerror (nodeoffset));
-	}
 
 	/* baudrate */
 	nodeoffset = fdt_path_offset (blob, "/soc/cpm/serial");
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index ea14948..b955749 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -70,6 +70,7 @@
 #define CONFIG_NET_MULTI	1
 
 #define CONFIG_ETHER_INDEX	4
+#define CONFIG_HAS_ETH0
 #define CONFIG_SYS_SCC_TOUT_LOOP	10000000
 
 # define CONFIG_SYS_CMXSCR_VALUE	(CMXSCR_RS4CS_CLK7 | CMXSCR_TS4CS_CLK8)
diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h
index f031a17..ae033b2 100644
--- a/include/configs/muas3001.h
+++ b/include/configs/muas3001.h
@@ -74,6 +74,7 @@
 
 #define CONFIG_ETHER_INDEX	1
 #define CONFIG_ETHER_ON_FCC1
+#define CONFIG_HAS_ETH0
 #define FCC_ENET
 
 /*
-- 
1.6.4.2