[U-Boot] Interrupts in uboot with ARM AT91SAM9 (V2)

[Manuel Sahm]

Hello,
 
I´ve already inserted the following code:
 
In at91sam9g20ek.c:
 
void thread_test(void)
{
 printf("RESET via INT\n");
}
 
in function :static void at91sam9g20ek_macb_hw_init (void)
{
.......
 
at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | AT91_RSTC_URSTIEN);
// Reset Bit AT91_RSTC_URSTS
at91_sys_read(AT91_RSTC_SR); 
 
at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
at91_sys_write(AT91_AIC_IDCR, 0x01 << AT91_ID_SYS);
at91_sys_write(AT91_AIC_SVR(AT91_ID_SYS), (unsigned int)thread_test);
at91_sys_write(AT91_AIC_SMR(AT91_ID_SYS), 5 | AT91_AIC_SRCTYPE_LOW);
at91_sys_write(AT91_AIC_ICCR, 0x01 << AT91_ID_SYS);
at91_sys_write(AT91_AIC_IECR, 0x01 << AT91_ID_SYS);
 
.....
}
 

 if I trigger my interrupt - the system hangs....nothing is printed on
screen and I cańt enter anything in the prompt ?
 
Anything else that I have to add ???
 
Thanks very much...
Manuel
 

>>> Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com> 05.09.2009
02:49 >>>
On 10:31 Thu 03 Sep     , Manuel Sahm wrote:
> Hello,
>  
> I have to use interrupts in UBoot 1.3.4 - how could I enable them ?
>  
> I have an AT91SAM9G20 - in ist header file I enable CONFIG_USE_IRQ
und
> uncomment the lines#ifdefc CONFIG_USE_IRQ #error .... #endif.
> I inserted the lines:
> #define CONFIG_STACKSIZE_IRQ (4*1024)
> #define CONFIG_STACKSIZE_FIQ (4*1024)
>  
> 
> In the file (/lib_amr/interrupts.c) I have to insert a function
called
> do_irq().
> I inserted:
>  
> void do_irq(struct pt_regs* pt_regs)
> {
>  printf("interrupt request\n");
>  show_regs(pt_regs);
>  bad_mode();
> }
>  
> When UBOOT starts all seems to be OK, but if I trigger my interrupt
-
> the system hangs....nothing is printed on screen anmd I cańt enter
> anything in the prompt ?
>  
> Could you please help me.... ?
you need to clear the interrupt and add the at91 interrupt controller
to use it
 
Best Regards,
J.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de 
http://lists.denx.de/mailman/listinfo/u-boot