[U-Boot] [PATCH] Add support for Eukrea CPU9260/CPU9G20 SBC

[Eric Bénard]

Hi Jean-Christophe,

Jean-Christophe PLAGNIOL-VILLARD a écrit :
> On 18:15 Sat 05 Sep     , Eric Benard wrote:
>> these boards are built around Atmel's AT91SAM9260/9G20 and have
>> up to 64MB of NOR flash, up to 128MB of SDRAM, up to 2GB of NAND
>> and include a 10/100 Ethernet PHY in RMII mode.
>>
>> Signed-off-by: Eric Benard <eric at eukrea.com>
>> ---
>>  MAINTAINERS                        |    5 +
>>  MAKEALL                            |    2 +
>>  Makefile                           |    8 +
>>  board/eukrea/cpu9260/Makefile      |   59 +++++
>>  board/eukrea/cpu9260/config.mk     |    1 +
>>  board/eukrea/cpu9260/cpu9260.c     |  218 +++++++++++++++++
>>  board/eukrea/cpu9260/led.c         |  153 ++++++++++++
>>  cpu/arm926ejs/at91/lowlevel_init.S |    3 +-
>>  include/configs/cpu9260.h          |  453 ++++++++++++++++++++++++++++++++++++
>>  9 files changed, 901 insertions(+), 1 deletions(-)
>>  create mode 100644 board/eukrea/cpu9260/Makefile
>>  create mode 100644 board/eukrea/cpu9260/config.mk
>>  create mode 100644 board/eukrea/cpu9260/cpu9260.c
>>  create mode 100644 board/eukrea/cpu9260/led.c
>>  create mode 100644 include/configs/cpu9260.h
>>
> it's looks fine
> 
do you plan to merge it or should I fix anything ?

Thanks,
Eric