[U-Boot] [PATCH 1/5] net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs

[Anton Vorontsov]

This will be needed for MPC8360E-MDS boards with rev. 2.1 CPUs.

Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
---
 drivers/qe/uec.h     |    1 +
 drivers/qe/uec_phy.c |   15 +++++++++++++--
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index 1568310..df6f7c9 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -670,6 +670,7 @@ typedef enum enet_interface {
 	ENET_1000_RGMII,
 	ENET_1000_RGMII_ID,
 	ENET_1000_RGMII_RXID,
+	ENET_1000_RGMII_TXID,
 	ENET_1000_TBI,
 	ENET_1000_RTBI,
 	ENET_1000_SGMII
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index aa4eb5e..9715183 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -429,12 +429,23 @@ static int marvell_init(struct uec_mii_info *mii_info)
 {
 	struct eth_device *edev = mii_info->dev;
 	uec_private_t *uec = edev->priv;
+	enum enet_interface iface = uec->uec_info->enet_interface;
 
-	if (uec->uec_info->enet_interface == ENET_1000_RGMII_ID) {
+	if (iface == ENET_1000_RGMII_ID ||
+			iface == ENET_1000_RGMII_RXID ||
+			iface == ENET_1000_RGMII_TXID) {
 		int temp;
 
 		temp = phy_read(mii_info, MII_M1111_PHY_EXT_CR);
-		temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
+		if (iface == ENET_1000_RGMII_ID) {
+			temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY;
+		} else if (iface == ENET_1000_RGMII_RXID) {
+			temp &= ~MII_M1111_TX_DELAY;
+			temp |= MII_M1111_RX_DELAY;
+		} else if (iface == ENET_1000_RGMII_TXID) {
+			temp &= ~MII_M1111_RX_DELAY;
+			temp |= MII_M1111_TX_DELAY;
+		}
 		phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp);
 
 		temp = phy_read(mii_info, MII_M1111_PHY_EXT_SR);
-- 
1.6.3.3