[U-Boot] [PATCH] ppc/85xx: Clean up do_reset

[Kumar Gala]

There is no reason to do a run time check for e500 v1 based cores to
determine if we have the GUTs RSTCR facility.  Only the first generation
of PQ3 parts (MPC8540/41/55/60) do not have it.  So checking to see if
we are e500 v2 would miss future parts (like e500mc).

Just change this to be ifdef'd based on CONFIG_MPC85{40,41,55,60}.

Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
 cpu/mpc85xx/cpu.c |   25 +++++++++----------------
 1 files changed, 9 insertions(+), 16 deletions(-)

diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 8b3810f..bdd9ee4 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -153,27 +153,15 @@ int checkcpu (void)
 
 int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
 {
-	uint pvr;
-	uint ver;
+/* Everything after the first generation of PQ3 parts has RSTCR */
+#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+    defined(CONFIG_MPC8555) || defined(CONFIG_MPC8560)
 	unsigned long val, msr;
 
-	pvr = get_pvr();
-	ver = PVR_VER(pvr);
-
-	if (ver & 1){
-	/* e500 v2 core has reset control register */
-		volatile unsigned int * rstcr;
-		rstcr = (volatile unsigned int *)(CONFIG_SYS_IMMR + 0xE00B0);
-		*rstcr = 0x2;		/* HRESET_REQ */
-		udelay(100);
-	}
-
 	/*
-	 * Fallthrough if the code above failed
 	 * Initiate hard reset in debug control register DBCR0
-	 * Make sure MSR[DE] = 1
+	 * Make sure MSR[DE] = 1.  This only resets the core.
 	 */
-
 	msr = mfmsr ();
 	msr |= MSR_DE;
 	mtmsr (msr);
@@ -181,6 +169,11 @@ int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
 	val = mfspr(DBCR0);
 	val |= 0x70000000;
 	mtspr(DBCR0,val);
+#else
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	out_be32(&gur->rstcr, 0x2);	/* HRESET_REQ */
+	udelay(100);
+#endif
 
 	return 1;
 }
-- 
1.6.0.6