[U-Boot] Please pull u-boot-mpc85xx
Wolfgang Denk
wd at denx.de
Wed Sep 16 22:50:01 CEST 2009
Dear Kumar Gala,
In message <Pine.LNX.4.64.0909152219420.17590 at localhost.localdomain> you wrote:
> The following changes since commit 3ca55bce9c8bf00df06a20487fafc16fa2f8084b:
> Marcel Ziswiler (1):
> mpc8260: remove Ethernet node fixup to use generic FDT code.
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc85xx.git master
>
> Kumar Gala (7):
> ppc/8xxx: Misc DDR related fixes
> ppc/85xx: Introduce low level write_tlb function
> ppc/85xx: Repack tlb_table to save space
> ppc/85xx: Move code around to prep for NAND_SPL
> ppc/85xx: Change cpu_init_early_f so we can use with NAND SPL
> ppc/85xx: Split out cpu_init_early into its own file for NAND_SPL
> ppc/85xx: Disable all async interrupt sources when we boot
>
> Mingkai Hu (2):
> ppc/85xx: add boot from NAND/eSDHC/eSPI support
> NAND boot: change NAND loader's relocate SP to CONFIG param
>
> Roy Zang (1):
> ppc/85xx: Enable usb ehci support for p2020ds board
>
> Scott Wood (3):
> ppc/85xx: Don't enable interrupts before we're ready
> ppc/85xx: Ensure that MAS8 is zero when writing TLB entries.
> ppc/85xx: Remove some bogus code from external interrupt handler.
>
> board/freescale/mpc8313erdb/mpc8313erdb.c | 2 +-
> board/sheldon/simpc8313/simpc8313.c | 2 +-
> cpu/mpc85xx/Makefile | 1 +
> cpu/mpc85xx/cpu_init.c | 67 +++++++--------
> cpu/mpc85xx/cpu_init_early.c | 76 ++++++++++++++++
> cpu/mpc85xx/start.S | 55 +++++++++++-
> cpu/mpc85xx/tlb.c | 60 ++++++-------
> cpu/mpc85xx/traps.c | 9 +--
> cpu/mpc85xx/u-boot-nand.lds | 138 +++++++++++++++++++++++++++++
> cpu/mpc8xxx/ddr/ctrl_regs.c | 10 +-
> cpu/mpc8xxx/ddr/ddr3_dimm_params.c | 4 +-
> drivers/misc/fsl_law.c | 2 +
> include/asm-ppc/mmu.h | 25 +++---
> include/asm-ppc/processor.h | 2 +
> include/configs/MPC8313ERDB.h | 1 +
> include/configs/P2020DS.h | 9 ++
> include/configs/SIMPC8313.h | 1 +
> 17 files changed, 364 insertions(+), 100 deletions(-)
> create mode 100644 cpu/mpc85xx/cpu_init_early.c
> create mode 100644 cpu/mpc85xx/u-boot-nand.lds
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
e-credibility: the non-guaranteeable likelihood that the electronic
data you're seeing is genuine rather than somebody's made-up crap.
- Karl Lehenbauer
More information about the U-Boot
mailing list