[U-Boot] [PATCH 3/4 v2] s5pc1xx: support serial driver
Minkyu Kang
mk7.kang at samsung.com
Thu Sep 10 09:35:30 CEST 2009
This patch includes the serial driver for s5pc1xx
Signed-off-by: Minkyu Kang <mk7.kang at samsung.com>
---
common/serial.c | 18 +++
drivers/serial/Makefile | 1 +
drivers/serial/serial_s5pc1xx.c | 308 +++++++++++++++++++++++++++++++++++++++
include/serial.h | 7 +
4 files changed, 334 insertions(+), 0 deletions(-)
create mode 100644 drivers/serial/serial_s5pc1xx.c
diff --git a/common/serial.c b/common/serial.c
index 41a24c2..e5ce9fd 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -69,6 +69,18 @@ struct serial_device *__default_serial_console (void)
#else
#error "CONFIG_SERIAL? missing."
#endif
+#elif defined(CONFIG_S5PC1XX)
+#if defined(CONFIG_SERIAL0)
+ return &s5pc1xx_serial0_device;
+#elif defined(CONFIG_SERIAL1)
+ return &s5pc1xx_serial1_device;
+#elif defined(CONFIG_SERIAL2)
+ return &s5pc1xx_serial2_device;
+#elif defined(CONFIG_SERIAL3)
+ return &s5pc1xx_serial3_device;
+#else
+#error "CONFIG_SERIAL? missing."
+#endif
#elif defined(CONFIG_OMAP3_ZOOM2)
return ZOOM2_DEFAULT_SERIAL_DEVICE;
#else
@@ -139,6 +151,12 @@ void serial_initialize (void)
serial_register(&s3c24xx_serial1_device);
serial_register(&s3c24xx_serial2_device);
#endif
+#if defined(CONFIG_S5PC1XX)
+ serial_register(&s5pc1xx_serial0_device);
+ serial_register(&s5pc1xx_serial1_device);
+ serial_register(&s5pc1xx_serial2_device);
+ serial_register(&s5pc1xx_serial3_device);
+#endif
serial_assign (default_serial_console ()->name);
}
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 64882a2..3c77a7c 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -33,6 +33,7 @@ COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o
COBJS-$(CONFIG_SYS_NS16550) += ns16550.o
COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o
COBJS-$(CONFIG_S3C64XX) += s3c64xx.o
+COBJS-$(CONFIG_S5PC1XX) += serial_s5pc1xx.o
COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial.o
COBJS-$(CONFIG_CLPS7111_SERIAL) += serial_clps7111.o
COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o
diff --git a/drivers/serial/serial_s5pc1xx.c b/drivers/serial/serial_s5pc1xx.c
new file mode 100644
index 0000000..f637f3d
--- /dev/null
+++ b/drivers/serial/serial_s5pc1xx.c
@@ -0,0 +1,308 @@
+/*
+ * (C) Copyright 2009 SAMSUNG Electronics
+ * Minkyu Kang <mk7.kang at samsung.com>
+ * Heungjun Kim <riverful.kim at samsung.com>
+ *
+ * based on drivers/serial/s3c64xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/uart.h>
+#include <asm/arch/clk.h>
+
+#if defined(CONFIG_SERIAL_MULTI)
+#include <serial.h>
+
+/* Multi serial device functions */
+#define DECLARE_S5P_SERIAL_FUNCTIONS(port) \
+ int s5p_serial##port##_init(void) { \
+ return serial_init_dev(port); } \
+ void s5p_serial##port##_setbrg(void) { \
+ serial_setbrg_dev(port); } \
+ int s5p_serial##port##_getc(void) { \
+ return serial_getc_dev(port); } \
+ int s5p_serial##port##_tstc(void) { \
+ return serial_tstc_dev(port); } \
+ void s5p_serial##port##_putc(const char c) { \
+ serial_putc_dev(port, c); } \
+ void s5p_serial##port##_puts(const char *s) { \
+ serial_puts_dev(port, s); }
+
+#define INIT_S5P_SERIAL_STRUCTURE(port, name, bus) { \
+ name, \
+ bus, \
+ s5p_serial##port##_init, \
+ s5p_serial##port##_setbrg, \
+ s5p_serial##port##_getc, \
+ s5p_serial##port##_tstc, \
+ s5p_serial##port##_putc, \
+ s5p_serial##port##_puts, }
+#else
+
+#ifdef CONFIG_SERIAL0
+#define UART_NR S5PC1XX_UART0
+#elif defined(CONFIG_SERIAL1)
+#define UART_NR S5PC1XX_UART1
+#elif defined(CONFIG_SERIAL2)
+#define UART_NR S5PC1XX_UART2
+#elif defined(CONFIG_SERIAL3)
+#define UART_NR S5PC1XX_UART3
+#else
+#error "Bad: you didn't configure serial ..."
+#endif
+
+#endif /* CONFIG_SERIAL_MULTI */
+
+static inline struct s5pc1xx_uart *s5pc1xx_get_base_uart(int dev_index)
+{
+ u32 offset = dev_index * 0x400;
+
+ if (cpu_is_s5pc100())
+ return (struct s5pc1xx_uart *)(S5PC100_PA_UART + offset);
+ else
+ return (struct s5pc1xx_uart *)(S5PC110_PA_UART + offset);
+}
+
+/*
+ * The coefficient, used to calculate the baudrate on S5PC1XX UARTs is
+ * calculated as
+ * C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT
+ * however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1,
+ * 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants:
+ */
+static const int udivslot[] = {
+ 0,
+ 0x0080,
+ 0x0808,
+ 0x0888,
+ 0x2222,
+ 0x4924,
+ 0x4a52,
+ 0x54aa,
+ 0x5555,
+ 0xd555,
+ 0xd5d5,
+ 0xddd5,
+ 0xdddd,
+ 0xdfdd,
+ 0xdfdf,
+ 0xffdf,
+};
+
+void _serial_setbrg(const int dev_index)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+ u32 pclk = get_pclk();
+ u32 baudrate = gd->baudrate;
+ u32 val;
+
+ val = pclk / baudrate;
+
+ writel(val / 16 - 1, &uart->UBRDIV);
+ writel(udivslot[val % 16], &uart->UDIVSLOT);
+}
+
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void
+serial_setbrg_dev(unsigned int dev_index)
+{
+ _serial_setbrg(dev_index);
+}
+#else
+void serial_setbrg(void)
+{
+ _serial_setbrg(UART_NR);
+}
+#endif
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ */
+int serial_init_dev(const int dev_index)
+{
+ struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+ /* reset and enable FIFOs, set triggers to the maximum */
+ writel(0, &uart->UFCON);
+ writel(0, &uart->UMCON);
+ /* 8N1 */
+ writel(0x3, &uart->ULCON);
+ /* No interrupts, no DMA, pure polling */
+ writel(0x245, &uart->UCON);
+
+ _serial_setbrg(dev_index);
+
+ return 0;
+}
+
+#if !defined(CONFIG_SERIAL_MULTI)
+int serial_init(void)
+{
+ return serial_init_dev(UART_NR);
+}
+#endif
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int _serial_getc(const int dev_index)
+{
+ struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+ /* wait for character to arrive */
+ while (!(readl(&uart->UTRSTAT) & 0x1))
+ ;
+
+ return (int)(readl(&uart->URXH) & 0xff);
+}
+
+#if defined(CONFIG_SERIAL_MULTI)
+static inline int serial_getc_dev(unsigned int dev_index)
+{
+ return _serial_getc(dev_index);
+}
+#else
+int serial_getc(void)
+{
+ return _serial_getc(UART_NR);
+}
+#endif
+
+#ifdef CONFIG_MODEM_SUPPORT
+static int be_quiet;
+void disable_putc(void)
+{
+ be_quiet = 1;
+}
+
+void enable_putc(void)
+{
+ be_quiet = 0;
+}
+#endif
+
+/*
+ * Output a single byte to the serial port.
+ */
+void _serial_putc(const char c, const int dev_index)
+{
+ struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+#ifdef CONFIG_MODEM_SUPPORT
+ if (be_quiet)
+ return;
+#endif
+
+ /* wait for room in the tx FIFO */
+ while (!(readl(&uart->UTRSTAT) & 0x2))
+ ;
+
+ writel(c, &uart->UTXH);
+
+ /* If \n, also do \r */
+ if (c == '\n')
+ serial_putc('\r');
+}
+
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void serial_putc_dev(unsigned int dev_index, const char c)
+{
+ _serial_putc(c, dev_index);
+}
+#else
+void serial_putc(const char c)
+{
+ _serial_putc(c, UART_NR);
+}
+#endif
+
+/*
+ * Test whether a character is in the RX buffer
+ */
+int _serial_tstc(const int dev_index)
+{
+ struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+ return (int)(readl(&uart->UTRSTAT) & 0x1);
+}
+
+#if defined(CONFIG_SERIAL_MULTI)
+static inline int serial_tstc_dev(unsigned int dev_index)
+{
+ return _serial_tstc(dev_index);
+}
+#else
+int serial_tstc(void)
+{
+ return _serial_tstc(UART_NR);
+}
+#endif
+
+void _serial_puts(const char *s, const int dev_index)
+{
+ while (*s)
+ _serial_putc(*s++, dev_index);
+}
+
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void serial_puts_dev(int dev_index, const char *s)
+{
+ _serial_puts(s, dev_index);
+}
+#else
+void serial_puts(const char *s)
+{
+ _serial_puts(s, UART_NR);
+}
+#endif
+
+#ifdef CONFIG_HWFLOW
+static int hwflow; /* turned off by default */
+int hwflow_onoff(int on)
+{
+ switch (on) {
+ case 1:
+ hwflow = 1; /* turn on */
+ break;
+ case -1:
+ hwflow = 0; /* turn off */
+ break;
+ }
+ return hwflow;
+}
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI)
+DECLARE_S5P_SERIAL_FUNCTIONS(0);
+struct serial_device s5pc1xx_serial0_device =
+ INIT_S5P_SERIAL_STRUCTURE(0, "s5pser0", "S5PUART0");
+DECLARE_S5P_SERIAL_FUNCTIONS(1);
+struct serial_device s5pc1xx_serial1_device =
+ INIT_S5P_SERIAL_STRUCTURE(1, "s5pser1", "S5PUART1");
+DECLARE_S5P_SERIAL_FUNCTIONS(2);
+struct serial_device s5pc1xx_serial2_device =
+ INIT_S5P_SERIAL_STRUCTURE(2, "s5pser2", "S5PUART2");
+DECLARE_S5P_SERIAL_FUNCTIONS(3);
+struct serial_device s5pc1xx_serial3_device =
+ INIT_S5P_SERIAL_STRUCTURE(3, "s5pser3", "S5PUART3");
+#endif /* CONFIG_SERIAL_MULTI */
diff --git a/include/serial.h b/include/serial.h
index 821b583..bbda3f0 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -43,6 +43,13 @@ extern struct serial_device s3c24xx_serial1_device;
extern struct serial_device s3c24xx_serial2_device;
#endif
+#if defined(CONFIG_S5PC1XX)
+extern struct serial_device s5pc1xx_serial0_device;
+extern struct serial_device s5pc1xx_serial1_device;
+extern struct serial_device s5pc1xx_serial2_device;
+extern struct serial_device s5pc1xx_serial3_device;
+#endif
+
#if defined(CONFIG_OMAP3_ZOOM2)
extern struct serial_device zoom2_serial_device0;
extern struct serial_device zoom2_serial_device1;
--
1.5.4.3
More information about the U-Boot
mailing list